Ropeway And Rapid Transport System Development Corporation HP Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Ropeway And Rapid Transport System Development Corporation HP Limited - RTDC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Oct 2024
Closing Date22 Oct 2024
Tender Amount₹ 3,76,54,804
Costs
EMD
₹ 7,51,440Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
For Rennovation Work Of Multiple Buildings At Diet Shimla Hp And Diet Sirmaur Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RTDCH_94062_1Bid Award Id
ViewTender No
RTDC/DIETShimla and Sirmour/2024/2028-29Tender Authority
Ropeway And Rapid Transport System Development Corporation HP Limited ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
956.1
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
1.26
-
-
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
(450 mm dia piles)
41.47
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum
12.53
-
-
Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
45
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
4.1
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
All works upto plinth level :
1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
10.98
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : satisfaction of Engineer-in-charge. 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) Parking facilities
33.75
-
-
Coursed rubble masonry (first sort) with hardstone in foundation and plinth with: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Cement mortar 1:6 (1 cement : 6 coarse sand)
22.87
-
-
Coursed rubble masonry with hard stone (first or second sort) in super structure above plinth level and upto floor five level. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Masonrywork (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand)
96.06
-
-
Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
121.96
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
57.17
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Thermo-Mechanically Treated bars of grade Fe-500D or more.
7344.25
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge Foundations, footings, bases of columns, etc. for mass concrete (Boundary wall)
6.82
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers (Boundary wall)
93.3
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts (Boundary wall)
101.4
-
-
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Boundary wall)
3.48
-
-
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Cement Mortar 1:6 (1 cement : 6 coarse sand).
2.52
-
-
Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength in super structure above plinth level up to floor V level in: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge Cement mortar 1:6 (1 cement : 6 Coarse sand)
10
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2652.13
-
-
52mm thick cement concrete flooring with concrete hardener topping, under layer 40mm thick cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix:2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
4.2
-
-
Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8.4
-
-
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.[Red Sand Stone]
60.51
-
-
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.[ Red Sand Stone]
10
-
-
20 mm cement plaster of mix : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:4 (1 cement: 4 fine sand)
13.44
-
-
12 mm cement plaster of mix : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:4 (1 cement: 4 fine sand)
10
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Finishing walls with textured exterior paint of required shade :
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. [White Sand Stone]
8.4
-
-
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. [1.00 mm thick with zinc coating not less than 278 gm/m2
5
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
6.84
-
-
Designing, fabricating, installing of Signage, caption, photograph UV Digital printed on 3M make vinyl with lamination in matt finish. mounted on ACP sheet base fixed on paneled wall surface complete as per design, drawings submitted by contractor and approved approved by engineer incharge. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
6.84
-
-
Supplying and stacking sludge at site including royalty and carriage upto 5km lead complete (sludge measured in stacks will be reduced by 8% for payment). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
15
-
-
Fine dressing of the ground
50
-
-
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
15
-
-
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
30
-
-
Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.In rows 5 cm apart in both directions
50
-
-
Designing, Preparation of beds for hedging and shrubbery by excavating 60cm deep and trenching the excavated base to a further depth of 30cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Designing, Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3mm 2m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Engineer-in-charge and approved shop drawing prepared by the contractor prior to work execution. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
Designing, Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing 2 nos M.S. sheet rings 50 x 0.5 mm fixed with rivets complete in all respects as per shop drawings prepared by the contractor & approved by RTDC consultant including painting inside and outside of tree guard with: Two or more coats of synthetic enamel paint of approved quality shade over a priming coat as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
Flooding the ground with water including making kiaries and dismantling the same. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5m complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Designing, Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Top inside dia 90 cm, outer bottom dia 45 cm, total height 90 cm with wall thickness of 50.0 mm minimum
125
-
-
Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one part of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Size of Empty Pots 25cm Top dia, 15cm Bottom Dia & 25cm Perpendicular height.
75
-
-
Filling of the Polythene bags by mixture of good earth and manuare in the ratio of 2:1 (2 patrt of good earth and 1 part of the manure) and placing the same of appropriate place (the good earth & manure Polythene bags will be provided by the department) all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Polythene bags size 25cm dia x 35cm height as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
25
-
-
Polythene bags size 30cm dia x 30cm height as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
25
-
-
Providing and laying Neelgiri / Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
150
-
-
Cutting of Hedge / Edge including removing of cut material, cleaning, hoeing of hedge / edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
150
-
-
Cutting of designer hedge/edge removing of cut materials, cleaning, hoeing of hedge / edge bed watering manure and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
150
-
-
Topairy cutting/shapping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topairy) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Height of Topairy upto 120 cm.
50
-
-
Height of Topairy above 120 cm.
50
-
-
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (excluding cast of plant & water) Trees Plant
15
-
-
Shrubs Plant
20
-
-
Hedge Plant / Ground Cover
50
-
-
Pruning, trimming, shaping of trees /shrubs (ht 15 feet and above) i/c removal of cut materials upto 50mt. Lead, as per direction of officer in charge. T&P shall be arranged by the contractor. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. [Sections of DSR (Civil) applicable for DSR (Horticulture)
50
-
-
Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
50
-
-
Providing and displaying of Aglaonema Butterfly having ht.30 cm 10 to 12 fresh, healthy and attractive colorful leaves, well developed in 25cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge.
10
-
-
Providing and displaying of Aglaonema Parrot Jungle (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot/Plastic pot & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and displaying of Araucaria cookie having ht. 75 cm to 90 cm, straight, well developed, fresh and healthy with lush green leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and displaying of Areca Palm having ht. 1.20 m to 1.50 m with 5 to 6 suckers, well developed, fresh and healthy with lush green foliage in 25 cm size of Earthen pot/Plastic pot & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and displaying of Dracaena rosea having ht. 30 cm & above with 8 to10 leaves, well developed, fresh and healthy in 20 cm size of Earthen pot/Plastic pot & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Allyssum white in full bloom well developed fresh & healthy Plant in 20 cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Antirrhinum Hybrid Dwarf variety (3 in one) well developed with fresh & healthy Flower multi branch in full bloom in 25cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Asiatic lilly hybrid variety (3 in one) in each pot having in full bloom 3 to 5 flowers 30 to 45 cm ht. well developed in 25cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Calendula double variety well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Cineraria long 45 to 60 cm ht., 8 to 10 branch with full bloom specimen plant with green painted stacking in 30 cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Caladium Hybrid variety 3 to 4 in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Sunflower hybrid well developed 15 to 20 cm ht. with fresh & healthy foliage at blooming stage in 20 cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Tapioca variegated (Manihot esculenta) well developed fresh & healthy 30 to 45 cm ht. in bright colour foliage in 25 cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25cm Earthen Pot, as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Euphorbia milli hybrid variety with multi branch, full bloom, with fresh and healthy well developed having 30 to 45 cm ht. in 35 cm Cement Pots as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Displaying Ficus nuda topiary well developed with fresh & healthy foliage 45 to 60cm spread 75 to 90 cm ht. bushy in 35cm Cement Pot as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
20
-
-
Providing and Displaying Latania Rubra Palm well developed with fresh & healthy foliage 150 to 180 cm ht. with 6 to 7 leaves in big 35cm Cement Pot as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Chlorophytum (Green), full of leafy suckers in 15cm size of Earthen Pot/Plastic Pot & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Iresine herbstii, of height 20-25 cm. full of branches well developed in 15 cm size of Earthen Pot/Plastic Pot & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Plumeria acutifolia of height 150-165 cm. with 3-4 branches in big size HDPE bag as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Supply and stacking of plant Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Ipomoea purpurea (Morning glory) of height 30cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Name of Work:- - Renovation work in Residential hostel Facilities for Boys & Girls hostels- Civil (Estimate Package-II) Part-A
-
-
-
CONCRETE WORK
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
2
-
-
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
38
-
-
BRICK WORK
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Cement mortar 1:4 (1 cement :4 coarse sand)
326
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
326
-
-
Providing and filling AAC blocks including proper watering and compaction in sunken areas all complete as per drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
38
-
-
MARBLE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Granite of any colour and shade, Area of slab over 0.50 sqm
8
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Granite Stone of approved shade
6
-
-
WOOD WORK
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
60
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1.0 mm thick
119
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 125mm
28
-
-
Providing 40x5 mm flat iron hold fast 40 cm long with cement concrete block 30x10x15cm 1:3:6 mix. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
168
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
With 2nd class teak wood beading 62X19 mm
4
-
-
Providing and fixing Stainless steel satin finish SS 304 grade Sliding Door bolts for wooden doors of approved make and model all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 250x16 mm
28
-
-
Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws for wooden doors of approved make and model all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 450x10 mm
8
-
-
300x10 mm
28
-
-
STEEL WORK
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 10 x 80 mm
88
-
-
FLOORING
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
306
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
230
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Size of Tile 600x600 mm
158
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Double charge Size of Tile 600x1200 mm
16
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Size of tile 1200 x 1200mm
10
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 600X600mm
10
-
-
800x800mm
10
-
-
Roofing Work
-
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge
90
-
-
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.
310
-
-
Designing, Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of 24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
50
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
288
-
-
Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
0.80 mm thick with zinc coating not less than275 gm/m².
283
-
-
FINISHING
12 mm cement plaster : as complete in all respect including with all lead and lift as per direction and satisfaction as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:4 (1 cement : 4 coarse sand)
2105
-
-
6 mm cement plaster of mix : as complete in all respect including with all lead and lift as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:3 (1 cement : 3 fine sand)
200
-
-
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as complete in all respect including with all lead and lift as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge..(payment for providing grooves shall be made separately)
140
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. as complete in all respect including with all lead and lift as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Two coats
4395
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Two or more coats on new work
50
-
-
Finishing walls with textured exterior paint of required shade : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
1449
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
4305
-
-
DISMANTLING WORKS
-
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
9
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. In cement mortar
18
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Of area 3 sq. metres and below
10
-
-
ALUMINIUM WORKS
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
For fixed portion, Powder coated aluminium (minimum thickness of powder coating 50 micron)
139
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Powder coated aluminium (minimum thickness of powder coating 50 micron)
44
-
-
Providing and fixing 10mm thick toughened glass in Aluminium frame work including sealing with EPDM / Neoprene gasket all complete as per the architectural drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
1
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Upto 5mm depth and 5 mm width
4
-
-
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar
8
-
-
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
419
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge., manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
152
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)
78
-
-
WATER PROOFING
-
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
248
-
-
Renovation work in Residential hostel Facilities for Boys & Girls hostels- Plumbing (Estimate Package-II) Part- B (contractor to include demolition cost of existing plumbing fixtures & fittings and pipes to execute below mentioned works)
-
-
-
SUB HEAD - I : SANITARY FIXTURES ( PROVIDING AND FIXING )
-
-
-
Providing and Fixing White Viterous China Extended wall mounting water closet of size 780 x 370 x 690 mm of approved shape including providing and fixing white viterous china cistern with dual flush fittings of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litre ) including seat cover and cistern fittings nuts bolts and gaskets etc complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
16
-
-
Providing and fixing wash basin with C.I. brackets 15 mm dia CP brass single hole basin mixer of approved quality and make including painting of fittings and brackets cutting and making good the walls wherever required as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.White Viterous china Wash basin size 550x400 mm with a 15 mm CP brass single hole basin mixer as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
16
-
-
Providing and Fixing CP brass bib cock of approved quality conforming to IS : 8931 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
16
-
-
Providing and Fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
12
-
-
Providing and Fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
8
-
-
Providing and Fixing CP brass stop cock ( concealed ) of standard design and of approved make conforming to IS : 8931 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
16
-
-
Providing and placing on terrace ( at all floor levels ) polythylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Circular Tank
6000
-
-
Providing & fixing of Waste pipe for Wash basins & Sinks including pvc waste fittings complete.as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 40 mm dia
80
-
-
Providing & fixing PTMT liquid soap container 109mm wide,125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arangement of approved quality and colour as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gram. Less as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing & fixing PTMT soap dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements.Weighing not less than 106gms. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing & fixing 600 x 450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass Screws and washers complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45cm length as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing and fixing CP brass shower rose with 15 or 20 mm inlet 100 mm diameter as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing & fixing C.P. brass Central hole wall mounted sink Mixer with aerator connecting legs & 2 nos CP brass wall flange and 2 nos CP brass stop cock including cutting & making good the walls wherever required complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Providing and fixing C.P. brass Double coat hooks fixed in Toilet wall with C.P brass wall flanges & C.P. brass screws and other required accessories complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
28
-
-
Providing and fixing health faucet with 1 m CP brass flexible tube and swivel hook with CP brass wall flange including cutting & making good the walls wherever required complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
16
-
-
Providing and fixing stainless steel 600 mm long Grab Bar with 2 nos CP brass wall flange including cutting & making good the walls wherever required complete in all respect as complete in all respect including with all lead and lift as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing and fixing vertical or horizontal storage type hot water heater electrical operated fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable length of power cable and 15 amps plug. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 Litre Capacity
6
-
-
25 Litre Capacity
6
-
-
SUB HEAD - II : INTERNAL DRAINAGE (RAINWATER, SOIL, WASTE & FITTINGS)
-
-
-
Providing and fixing 100 mm diamter and 60 cm long rainwater spout in cement mortar 1:4 (1 cement : 4 fine sand) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer in charge. Stone ware spout
4
-
-
Providing and Fixing on wall face Unplasticised rigid pvc rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Single Socketed Pipes 110 mm diameter
120
-
-
Providing and Fixing on wall face Rigid Unplasticised UPVC moulded fittings/accessories for unplasticised Rigid PVC Rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
Coupler
-
-
-
75 mm diameter
25
-
-
110 mm diameter
50
-
-
Single Push Fit Coupler
-
-
-
75 mm diameter
25
-
-
110 mm diameter
50
-
-
Single Tee with door
-
-
-
75x75x75 mm
5
-
-
110x110x110 mm
10
-
-
Single Tee without door
-
-
-
75x75x75 mm
5
-
-
110x110x110 mm
10
-
-
Bend 87.5 degree
-
-
-
75 mm bend
5
-
-
110 mm bend
10
-
-
Shoe ( Plain )
-
-
-
75 mm Shoe
4
-
-
110 mm Shoe
20
-
-
Providing and Fixing unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs , screwed with MS screws of required length , including cutting brick work with fixing in cement mortar 1:4 ( 1 Cement : 4 Coarse Sand ) and making good the wall etc . complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 110 mm diameter
50
-
-
Providing and Fixing Soil , Waste and Vent Pipes : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia Centrifugally cast ( spun ) iron socket and spigot ( S & S ) pipe as per IS : 3989
40
-
-
75 mm dia Centrifugally cast ( spun ) iron socket and spigot ( S & S ) pipe as per IS : 3989
30
-
-
Providing and Filling the joints with spun yarn , cement slurry and cement mortar 1 : 2 ( 1 Cement : 2 fine Sand ) in SCI / CI Pipes : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
75 mm dia Pipe
20
-
-
100 mm dia Pipe
35
-
-
Providing and Fixing MS holder bat clamps of approved design to sand cast iron / cast iron ( spun ) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of cement concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 graded stone aggregate 20 mm nominal sizes ) including cost of cutting holes and making good the walls etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
For 100 mm dia Pipe
10
-
-
For 75 mm dia Pipe
10
-
-
Providing and Fixing Bend of Required degree with access door , insertion rubber washers 3 mm thick , bolts and nuts complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia, Sand Cast iron S & S as per IS : 3989
10
-
-
Providing and Fixing Plain Bend of Required degree . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia Sand Cast iron S & S as per IS : 3989
10
-
-
Providing and Fixing Heel Rest Sanitary Bend as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia Spun Cast Iron as per IS : 3989
10
-
-
Providing and Fixing Double Equal Junction of Required degree with access door , insertion rubber washer 3 mm thick , bolts and nuts complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100x100x100x100 mm Spun Cast Iron as per IS : 3989
5
-
-
75x75x75x75 mm (Spun Cast Iron as per IS : 3989 )
5
-
-
Providing and Fixing Single Equal Plain Junction of Required degree with access door , insertion rubber washer 3 mm thick , bolts and nuts complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100x100x100 mm (Sand Cast Iron S&S as per IS : 3989 )
32
-
-
75x75x75 mm (Sand Cast Iron S&S as per IS : 3989)
30
-
-
Providing and Fixing Single Unequal Junction of Required degree with access door , insertion rubber washer 3 mm thick , bolts and nuts complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 x 100 x 75 mm (Sand Cast Iron S & S as per IS : 3989 )
12
-
-
Providing and Fixing Single Unequal Plain Junction of Required degree . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 x 100 x 75 mm Sand Cast Iron S & S as per IS : 3989
12
-
-
Providing and Fixing Sand Cast Iron S & S offsets as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 150 mm off sets
-
-
-
With 75 mm dia Pipe
6
-
-
With 100 mm dia Pipe
6
-
-
Providing and Fixing door piece , insertion rubber washer 3 mm thick , bolts and nuts complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm Spun Cast Iron as per IS : 3989
10
-
-
75 mm (Spun Cast Iron as per IS : 3989)
10
-
-
Providing and Fixing Terminal Guard : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm (Sand Cast Iron S & S as per IS : 3989 )
6
-
-
75 mm (Sand Cast Iron S & S as per IS : 3989 )
6
-
-
Providing and Fixing Collar : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm Sand Cast Iron S & S as per IS : 3989
10
-
-
75 mm (Sand Cast Iron S & S as per IS : 3989 )
10
-
-
Providing Lead Caulked Joints to Sand Cast iron / centrifugally cast spun iron pipes and fittings of diameter : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
100 mm dia pipe
12
-
-
75 mm dia pipe
12
-
-
Providing and Fixing MS Stays and clamps for sand cast iron / centrifugally cast ( spun ) iron pipes of diameter : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
100 mm dia pipe
10
-
-
75 mm dia pipe
5
-
-
Providing and Fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete , including cost of cutting and making good the walls and floors . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm inlet and 100 mm outlet (Sand Cast Iron S & S as per IS : 3989 )
36
-
-
Painting Sand cast iron / centrifugally cast ( spun ) iron soil , waste , vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey , or buff etc . Over a coat of primer ( of approved quality ) for new work : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
100 mm diameter Pipes
100
-
-
75 mm diameter Pipes
60
-
-
Providing and Fixing GI Pipes complete with GI Fittings and clamps including cutting and making good the walls etc . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Internal Work - Exposed on Wall
-
-
-
32 mm dia nominal bore
60
-
-
40 mm dia nominal bore
60
-
-
Painting GI Pipes and Fittings with Synthetic enamel white paint with two coats over a ready mixed priming coat , both of approved quality for new work : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
32 mm diameter pipe
60
-
-
40 mm diameter pipe
60
-
-
Providing and fixing multi-floor trap fitting with maximum 3 inlets 32,40 or 50 mm size fabricated from 100 dia GI pipes heavy duty and sockets,fixed to C.I. trap with Drip Seal joint and set in cement concrete as per standard drawing complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
28
-
-
Providing & fixing 100mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Providing and fixing CP Brass floor cleanout plug / Clean out plug as per drawing complete with G.I. Socket jointed to drainage pipe outlet including drip seal joint complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm diameter Pipe
12
-
-
Providing and fixing Stainless Steel Grade (304) grating with ring and Stainless steel anti cockroach basket and two SS screw including fixing to the floor with cement mortar. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
25
-
-
SUB HEAD - III : INTERNAL WATER SUPPLY
-
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
15 mm dia pipes
80
-
-
20 mm dia pipes
60
-
-
25 mm dia pipes
40
-
-
32 mm dia pipes
30
-
-
40 mm dia pipes
20
-
-
Painting GI Pipes & Fittings with synthetic enamel white paint with two coats over a ready mixed priming coat , both of approved quality for new work . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
15 mm dia pipes
80
-
-
20 mm dia pipes
60
-
-
25 mm dia pipes
40
-
-
32 mm dia pipes
30
-
-
40 mm dia pipes
20
-
-
Providing and Fixing GI Union in GI Pipe including cutting and threading the pipe and making long screws etc . Complete ( New Work ) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
15 mm dia pipes
40
-
-
20 mm dia pipes
35
-
-
25 mm dia pipes
30
-
-
32 mm dia pipes
25
-
-
40 mm dia pipes
20
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and makin good the same including testing of joints complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.. (Concealed work including cutting chases and making good the walls etc.)
-
-
-
15 mm dia pipes
100
-
-
20 mm dia pipes
80
-
-
25 mm dia .Pipes.
60
-
-
32 mm dia .Pipes.
40
-
-
Providing & fixing ball valve ( brass) of approved quality,High or low pressure, with plastic floats complete:- as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 25 mm dia nominal bore
4
-
-
Providing and fixing ferrul with c.i mouth cover 25 mm dia nominal bore
4
-
-
Providing and fixing Thermoflex or Careflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 9 mm thick ( Pipe Inside the Toilet )
-
-
-
For 15 mm dia Pipe
60
-
-
For 20 mm dia Pipe
40
-
-
For 25 mm dia Pipe
30
-
-
Providing and Fixing full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tasted to a pressure not less than 15 kg/sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
15 mm dia
5
-
-
20 mm dia
10
-
-
25 mm dia
10
-
-
32 mm dia
8
-
-
Providing and fixing GI pipes complete (IS:1239 medium class) with GI fittings conforming to IS : 1879 and clamps including MS pipe supports, painting with two or more coats of synthetic enamel paint including one coat of primer as per specification cutting and making good the walls etc. complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. INTERNAL WORK - EXPOSED ON WALL
For 65 mm dia Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
40
-
-
Providing and fixing C.I. butterfly valves Lever operated PN-1.6 complete with bolts, nuts, 1.5 mm thick compressed asbestos gasket and two nos flanges as per Table “E” complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 65 mm dia nominal bore as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Name of Work:- Renovation works :- General Electrical wiring, UPS wiring & LAN Cabling in admin block -01 and Hostel, Solar Lights, Drinking water Facilities- Package-III (the Contractor to include cost of Designing including taking approval of design from the Engineer in charge in the mentioned items below-:
-
-
-
SUB HEAD - I: CIRCUIT CUM POINT WIRING (SWITCH CONTROL LIGHT POINTS)
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Group C
80
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Switch Control Secondary Points) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Group C
90
-
-
MCB CONTROL LIGHT POINTS
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Primary point controlled by one MCB. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
30
-
-
Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
35
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
450
-
-
Designing ,Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
100
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
350
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
150
-
-
2 x 10 sq. mm + 1 x 10 sq.mm earth wire
50
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
75
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
75
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular switch, connection etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
75
-
-
Supply and Wiring for 250 volts single phase and neutral 2 Nos 6 amps socket outlate with control by 1 No switched with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 2mm thick PVC conduit including providing and fixing of 6 amps 3 pin switch socket outlet of aprpoved make and design in 2 mm thick GI box with grid plate and earthing of third pin of the socket with 2.5 Sq. mm PVC insulated copper conductor stranded flexible FRLS wire.(maximum four no. of switches socket shall be connected on one circuit) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
50
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
25
-
-
Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 63 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
1
-
-
Supplying and fixing 80 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 80 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
1
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required. (AC's & Gysers) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Telephone socket outlet as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
15
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
1 or 2 Module (75mmX75mm)
5
-
-
6 module (78mm X 205 mm X 50 mm)
5
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 3 pin , 5/6 amps socket outlet
5
-
-
5/6 amps switch
5
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 25 mm
20
-
-
32 mm
20
-
-
SUBHEAD - II - FITTINGS & FIXTURES
-
-
-
Supply, Installation, Testing and Commissioning of 10 W Bulk head Light. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 5W Mirror Light. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 18W Surface/Recessed Mounted LED circular Downlighter. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 18/20W Wall/Surface mouted 4 ft. LED as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 15W Surface mounted LED Square Downlighter (Cat no-Bajaj Lighting BGSLO SLEEK SURFACE 15W WH SQ or equivalent as specified in the approved list of make) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 36W (Nominal) 2x2 ft Recess Mounted LED Luminaire (Cat no- Bajaj Lighting BCTBLR 42W ZTN WH or equivalent as specified in the approved list of make.) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 12/9W Recessed mounted LED circular Downlighter (Cat no-Bajaj Lighting BGSLO SLEEK SURFACE 12W WH RD or equivalent as specified in the approved list of make) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 65W (Nominal) Recessed mounted LED Luminaire (Cat no- Bajaj Lighting or Equivalent) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 5W/mtr. Cove light as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan,making good the damages, connections, testing and commissioning etc. as required: of Approved Make Exhaust Fan, Heavy duty, 300 mm sweep as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
SUBHEAD - III - DISTRIBUTION BOARDS (the contractor to include cost of designing of distribution boards and SLD in the below mentioned items -: )
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 12 way, Double door
2
-
-
Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 8 way (4 + 24), Double door
2
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 12 way (4 + 36), Double door
2
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Single Pole
8
-
-
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 40 A
3
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 63 A
3
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
40 A
2
-
-
63 A
5
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
SUBHEAD - IV- UPS SYSTEM
-
-
-
Design ,Supply, installation, Testing and commissioning of the following rating UPS as per specifications and complete in all respects. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.15 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415 V + 1%), 50 Hz, IGBT based technology, Input harmonic Current THD =3% typical at 100% load, ,=6% maximum at 100% load with inbuilt Isolation Transformer and 30 min battery backup for each UPS along with battery cabinet, Parallel card, BMS Port & communication card complete in all respect including supporting steel structure for UPS and Battery as required.Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to batteries etc complete in all respect and as as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15KVA (3 phase in/ 3 phase out)
1
-
-
SUBHEAD - V - DATA NETWORKING V(STRUCTURE CABLING SYSTEM PASSIVE) ( the contractor to include cost of designing data networking layout and SLD in the below mentioned items )
-
-
-
Supplying and drawing of UTP 4 pair CAT6 LAN cable in the existing surface /recessed steel /PVC conduit as required (1 run of cable). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
450
-
-
Supply , Installtion , Testing and comissioning of armoured 6 core Singlemode OFC cable for interfloor switch connectivity. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
100
-
-
Supply , Installtion , Testing and comissioning of 48 port loaded LIU with adaptor plates , pigtel cables for connections. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Supply , Installtion , Testing and comissioning of LC-LC singlemode fiber patch cord. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Supply , Installtion , Testing and comissioning of CAT6 information outlet (I/O) for Data, Voice, CCTV & Wi-Fi rack. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
200
-
-
Supply , Installtion , Testing and comissioning of loaded 48 port CAT6 jack panel for CAT6 cable termination. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Supply , Installtion , Testing and comissioning of CAT6 patch cord 3 feet for rack side switch termination for user End. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
75
-
-
Supply , Installtion , Testing and comissioning of CAT6 patch cord 7 feet for user termination to information outlet Rack End. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
76
-
-
Supply , Installtion , Testing and comissioning of 42 U Wall mount rack with fans , 2 Nos of hardware pkts. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
1
-
-
Supply, installation, testing and commissioning of Single Mode 1G SFP Module compatible with above switches. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
1
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 25 mm
350
-
-
32 mm
100
-
-
TOTAL CARRIED TO SUMMARY FOR SUBHEAD - V (Solar Lights)
-
-
-
Design ,Supply, Installation & Commissioning of Solar PV stand alone Street Lighting System comprising of two 37 Wp / one 74 Wp SPV module, one 12 V, 75 Ah Tubular Plate sealed maintenance free VRLA Gel Battery, one luminaries with inbuilt inverter, dusk to dawn circuit for automatic switching on & off at dusk & dawn and 24 W LED Light, pole, one charge-regulator, module mounting structure, Pole mounted Battery box, cables and other fittings along with 5 (five) years guarantee / warranty period (25 years for SPV Module). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
7
-
-
Drinking Water facility
Providing & Fixing water purifier cum water cooler made of stainless steel having storage capacity of 80 liter & cooling capacity 60 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
DIET Nahan
-
-
-
Renovation work of - Boundary wall, Gate, Railing, Educational Signage, Parking Facilities- (Package No.-1) the Contractor to include cost of Designing including taking approval of design from the Engineer in charge in the mentioned items below-
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
270.2
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
279.45
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Parking facilities)
0.95
-
-
Boring, providing and installation bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Boundary wall) 450 mm dia piles
15.08
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (All works upto plinth level) Concrete of M25 grade with minimum cement content of 330 kg /cum
4.5
-
-
Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Parking facilities)
27
-
-
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Parking Facilities)
0.91
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (All works upto plinth level :) 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)
6.86
-
-
1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Parking facilities)
22.5
-
-
Coursed rubble masonry (first sort) with hardstone in foundation and plinth with as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Cement mortar 1:6 (1 cement : 6 coarse sand)
11.64
-
-
Coursed rubble masonry with hard stone (first or second sort) in super structure above plinth level and upto floor five level. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Masonrywork (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand).
72.41
-
-
Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
81.9
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (All works above plinth level upto floor V level) Concrete of M25 grade with minimum cement content of 330 kg /cum
22.78
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Thermo-Mechanically Treated bars of grade Fe-500D or more.
2873.13
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Boundary wall)
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
2.48
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers (Boundary wall)
33
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts (Boundary wall)
39
-
-
Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. (Boundary Wall)
3.48
-
-
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Cement Mortar 1:6 (1 cement : 6 coarse sand). (Parking Facilites)
1.89
-
-
Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength in super structure above plinth level up to floor V level in: as complete in all respect including with all lead and lift as per direction and satisfaction as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Cement mortar 1:6 (1 cement : 6 Coarse sand)
10
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1551.4
-
-
52mm thick cement concrete flooringwith concrete hardener topping, under layer 40mm thick cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix:2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3.15
-
-
Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
6.3
-
-
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
32.93
-
-
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
20 mm cement plaster of mix as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10.08
-
-
12 mm cement plaster of mix as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:4 (1 cement: 4 fine sand)
10
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations and as complete the following items in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
-
-
-
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
10
-
-
Finishing walls with textured exterior paint of required shade : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
10
-
-
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
6.3
-
-
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1.00 mm thick with zinc coating not less than 275 gm/m²
5
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.:
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
7.2
-
-
Providing and fixing of Signage, caption, photograph UV Digital printed on 3M make vinyl with lamination in matt finish. mounted on ACP sheet base fixed on paneled wall surface complete as per design, drawing and as directed by incharge. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
7.2
-
-
Name of Work:- Renovation & Repair work of Civil works (Package No.-2) [Part A]
-
-
-
CONCRETE WORK
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
2
-
-
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
7
-
-
BRICK WORK
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Cement mortar 1:4 (1 cement :4 coarse sand)
509
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
509
-
-
Providing and filling AAC blocks including proper watering and compaction in sunken areas all complete as per drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
25
-
-
MARBLE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Granite of any colour and shade Area of slab over 0.50 sqm
18
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Granite Stone of approved shade
5
-
-
WOOD WORK
-
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
21
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
6
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1.0 mm thick
21
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 125mm
24
-
-
Providing 40x5 mm flat iron hold fast 40 cm long with cement concrete block 30x10x15cm 1:3:6 mix. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
36
-
-
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. With 2nd class teak wood beading 62X19 mm
21
-
-
Providing and fixing Stainless steel satin finish SS 304 grade Sliding Door bolts for wooden doors of approved make and model all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 250x16 mm
6
-
-
Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS screws for wooden doors of approved make and model all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
450x10 mm
6
-
-
300x10 mm
6
-
-
STEEL WORK
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10 x 80 mm
180
-
-
FLOORING
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
870
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
103
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Size of Tile 600x600 mm
2294
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Double charge Size of Tile 600x1200 mm
230
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Size of tile 1200 x 1200mm
10
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
600X600mm
10
-
-
800x800mm
10
-
-
Roofing Work
-
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
680
-
-
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.
675
-
-
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of 24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
675
-
-
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
292
-
-
Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets40x3mm size, bolts, nuts and washers etc., as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 0.80 mm thick with zinc coating not less than275 gm/m².
75
-
-
FINISHING
-
-
-
12 mm cement plaster : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:4 (1 cement : 4 coarse sand)
1018
-
-
6 mm cement plaster of mix : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 1:3 (1 cement : 3 fine sand)
150
-
-
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
146
-
-
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Two coats
6491
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Two or more coats on new work
1315
-
-
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3987
-
-
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3518
-
-
DISMANTLING WORKS
-
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
9
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. In cement mortar
18
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Of area 3 sq. metres and below
10
-
-
ALUMINIUM WORKS
-
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
1779
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Powder coated aluminium (minimum thickness of powder coating 50 micron)
2124
-
-
Providing and fixing 10mm thick toughened glass in Aluminium frame work including sealing with EPDM / Neoprene gasket all complete as per the architectural drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
214
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Upto 5mm depth and 5 mm width
197
-
-
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar
344
-
-
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
164
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete manufacturer's specification & drawing. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 30 mm thick plain PVC door shutters
55
-
-
Providing and fixing Pre -laminated medium density fibre board exteriorgrade (Grade-I) IS:14587:1998 marked, to frame, backing or studdingwith screws etc. complete (Frames, backing or studding to be paid separately). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587
357
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)
17
-
-
WATER PROOFING
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
284
-
-
Name of Work:- Renovation & Repair work of Plumbing works (Package No.-2) [Part B]
-
-
-
SUB HEAD - I : SANITARY FIXTURES ( PROVIDING AND FIXING ) ( contractor to include demolition cost of existing plumbing fixtures & fittings & pipes to execute below mentioned works )
-
-
-
Providing and Fixing White Viterous China Extended wall mounting water closet of size 780 x 370 x 690 mm of approved shape including providing and fixing white viterous china cistern with dual flush fittings of flushing capacity 3 litre / 6 litre ( adjustable to 4 litre / 8 litre ) including seat cover and cistern fittings nuts bolts and gaskets etc complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
20
-
-
Providing and fixing wash basin with C.I. brackets 15 mm dia CP brass single hole basin mixer of approved quality and make including painting of fittings and brackets cutting and making good the walls wherever required White Viterous china Wash basin size 550x400 mm with a 15 mm CP brass single hole basin mixer as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
20
-
-
Providing and Fixing CP brass bib cock of approved quality conforming to IS : 8931 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
20
-
-
Providing and Fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
20
-
-
Providing and Fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
40
-
-
Providing and Fixing CP brass stop cock ( concealed ) of standard design and of approved make conforming to IS : 8931 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore
20
-
-
Providing and placing on terrace ( at all floor levels ) polythylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Circular Tank
4000
-
-
Providing & fixing of Waste pipe for Wash basins & Sinks including pvc waste fittings complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 40 mm dia
50
-
-
Providing & fixing PTMT liquid soap container 109mm wide,125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
16
-
-
Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed fitting arangement of approved quality and colour. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gram. Less as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
16
-
-
Providing & fixing PTMT soap dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements.Weighing not less than 106gms. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
16
-
-
Providing & fixing 600 x 450 mm beveled edge mirror of superior glass(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass Screws and washers complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
16
-
-
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm nominal bore with 45cm length
22
-
-
Providing and fixing CP brass shower rose with 15 or 20 mm inlet as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm diameter as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
22
-
-
Providing & fixing C.P. brass Central hole wall mounted sink Mixer with aerator connecting legs & 2 nos CP brass wall flange and 2 nos CP brass stop cock including cutting & making good the walls wherever required complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
22
-
-
Providing and fixing C.P. brass Double coat hooks fixed in Toilet wall with C.P brass wall flanges & C.P. brass screws and other required accessories complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
22
-
-
Providing and fixing health faucet with 1 m CP brass flexible tube and swivel hook with CP brass wall flange including cutting & making good the walls wherever required complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
20
-
-
Providing and fixing stainless steel 600 mm long Grab Bar with 2 nos CP brass wall flange including cutting & making good the walls wherever required complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
20
-
-
Providing and fixing vertical or horizontal storage type hot water heater electrical operated fixed to wall with anchor bolts & nuts, 15mm CP brass angle stop cock and 15mm CP brass non-return valve complete including making connections with 15mm dia CP connecting pipes on inlet and outlet, suitable length of power cable and 15 amps plug. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
15 Litre Capacity
1
-
-
25 Litre Capacity
1
-
-
SUB HEAD - II : INTERNAL DRAINAGE (RAINWATER, SOIL, WASTE & FITTINGS) ( contractor to include demolition cost of existing plumbing fixtures & fittings and pipes to execute below mentioned works )
-
-
-
Providing and Fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 ( 1 Cement : 4 Fine Sand ) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Stone ware Spout
40
-
-
Providing and Fixing on wall face Unplasticised rigid pvc rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Single Socketed Pipes 110 mm diameter
100
-
-
Providing and Fixing on wall face Rigid Unplasticised UPVC moulded fittings/accessories for unplasticised Rigid PVC Rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion .as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
Coupler
-
-
-
75 mm diameter
25
-
-
110 mm diameter
50
-
-
Single Push Fit Coupler
-
-
-
75 mm diameter
25
-
-
110 mm diameter
50
-
-
Single Tee with door
-
-
-
75x75x75 mm
5
-
-
110x110x110 mm
10
-
-
Single Tee without door
-
-
-
75x75x75 mm
5
-
-
110x110x110 mm
10
-
-
Bend 87.5 degree
-
-
-
75 mm bend
5
-
-
110 mm bend
10
-
-
Shoe ( Plain )
-
-
-
75 mm Shoe
4
-
-
110 mm Shoe
20
-
-
Providing and Fixing unplasticised PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs , screwed with MS screws of required length , including cutting brick work with fixing in cement mortar 1:4 ( 1 Cement : 4 Coarse Sand ) and making good the wall etc . complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 110 mm diameter as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
50
-
-
Providing and Fixing Soil , Waste and Vent Pipes : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia Centrifugally cast ( spun ) iron socket and spigot ( S & S ) pipe as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
40
-
-
75 mm dia (Centrifugally cast ( spun ) iron socket and spigot ( S & S ) pipe as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
30
-
-
Providing and Filling the joints with spun yarn , cement slurry and cement mortar 1 : 2 ( 1 Cement : 2 fine Sand ) in SCI / CI Pipes : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
-
-
-
75 mm dia Pipe
20
-
-
100 mm dia Pipe
35
-
-
Providing and Fixing MS holder bat clamps of approved design to sand cast iron / cast iron ( spun ) pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of cement concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 graded stone aggregate 20 mm nominal sizes ) including cost of cutting holes and making good the walls etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. For 100 mm dia Pipe
10
-
-
For 75 mm dia Pipe
10
-
-
Providing and Fixing Bend of Required degree with access door , insertion rubber washers 3 mm thick , bolts and nuts complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia Sand Cast iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Fixing Plain Bend of Required degree as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia Sand Cast iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Fixing Heel Rest Sanitary Bend as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia Spun Cast Iron as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Providing and Fixing Double Equal Junction of Required degree with access door , insertion rubber washer 3 mm thick , bolts and nuts complete .as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100x100x100x100 mm Spun Cast Iron as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
75x75x75x75 mm (Spun Cast Iron as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
5
-
-
Providing and Fixing Single Equal Plain Junction of Required degree with access door , insertion rubber washer 3 mm thick , bolts and nuts complete .as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100x100x100 mm (Sand Cast Iron S&S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
32
-
-
75x75x75 mm (Sand Cast Iron S&S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
30
-
-
Providing and Fixing Single Unequal Junction of Required degree with access door , insertion rubber washer 3 mm thick , bolts and nuts complete . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 x 100 x 75 mm Sand Cast Iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing and Fixing Single Unequal Plain Junction of Required degree. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 x 100 x 75 mm Sand Cast Iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing and Fixing Sand Cast Iron S & S offsets as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 150 mm off sets With 75 mm dia Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
6
-
-
With 100 mm dia Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
6
-
-
Providing and Fixing door piece , insertion rubber washer 3 mm thick , bolts and nuts complete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm Spun Cast Iron as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
75 mm (Spun Cast Iron as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
10
-
-
Providing and Fixing Terminal Guard : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm (Sand Cast Iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
6
-
-
75 mm (Sand Cast Iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
6
-
-
Providing and Fixing Collar : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm (Sand Cast Iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
10
-
-
75 mm (Sand Cast Iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.)
10
-
-
Providing Lead Caulked Joints to Sand Cast iron / centrifugally cast spun iron pipes and fittings of diameter : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
75 mm dia pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing and Fixing MS Stays and clamps for sand cast iron / centrifugally cast ( spun ) iron pipes of diameter :as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm dia pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
75 mm dia pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Providing and Fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete , including cost of cutting and making good the walls and floors as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm inlet and 100 mm outlet Sand Cast Iron S & S as per IS : 3989 as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
36
-
-
Painting Sand cast iron / centrifugally cast ( spun ) iron soil , waste , vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey , or buff etc . Over a coat of primer ( of approved quality ) for new work : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm diameter Pipes as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
100
-
-
75 mm diameter Pipes as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
Providing and Fixing GI Pipes complete with GI Fittings and clamps including cutting and making good the walls etc . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Internal Work - Exposed on Wall 32 mm dia nominal bore as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
40 mm dia nominal bore as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
Painting GI Pipes and Fittings with Synthetic enamel white paint with two coats over a ready mixed priming coat , both of approved quality for new work : as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 32 mm diameter pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
40 mm diameter pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
Providing and fixing multi-floor trap fitting with maximum 3 inlets 32,40 or 50 mm size fabricated from 100 dia GI pipes heavy duty and sockets,fixed to C.I. trap with Drip Seal joint and set in cement concrete as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
28
-
-
Providing & fixing 100mm x 50mm G.I. waste with reducing elbow & nipple cutting chases, the floor / slab, repairs complete as required and connection to GI / CI waste pipe complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Providing and fixing CP Brass floor cleanout plug / Clean out plug as per drawing complete with G.I. Socket jointed to drainage pipe outlet including drip seal joint complete in all respect as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 100 mm diameter Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
12
-
-
Providing and fixing Stainless Steel Grade (304) grating with ring and Stainless steel anti cockroach basket and two SS screw including fixing to the floor with cement mortar. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
25
-
-
SUB HEAD - III : INTERNAL WATER SUPPLY
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm dia pipes
80
-
-
20 mm dia pipes
60
-
-
25 mm dia pipes
40
-
-
32 mm dia pipes
30
-
-
40 mm dia pipes
20
-
-
Painting GI Pipes & Fittings with synthetic enamel white paint with two coats over a ready mixed priming coat , both of approved quality for new work . as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm dia pipes
80
-
-
20 mm dia pipes
60
-
-
25 mm dia pipes
40
-
-
32 mm dia pipes
30
-
-
40 mm dia pipes
20
-
-
Providing and Fixing GI Union in GI Pipe including cutting and threading the pipe and making long screws etc . Complete ( New Work ) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm dia pipes
40
-
-
20 mm dia pipes
35
-
-
25 mm dia pipes
30
-
-
32 mm dia pipes
25
-
-
40 mm dia pipes
20
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and makin good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15 mm dia pipes
100
-
-
20 mm dia pipes
80
-
-
25 mm dia .Pipes.
60
-
-
32 mm dia .Pipes.
40
-
-
Providing & fixing ball valve ( brass) of approved quality,High or low pressure, with plastic floats complete:- as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 25 mm dia nominal bore as complete in all respect including with all lead and lift as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
4
-
-
Providing and fixing ferrul with c.i mouth cover as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 25 mm dia nominal bore as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
4
-
-
Providing and fixing Thermoflex or Careflex thermal insulation tubing, a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories complete as per specification. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 9 mm thick ( Pipe Inside the Toilet )
For 15 mm dia Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
60
-
-
For 20 mm dia Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
40
-
-
For 25 mm dia Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
30
-
-
Providing and Fixing full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tasted to a pressure not less than 15 kg/sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
15 mm dia
5
-
-
20 mm dia
10
-
-
25 mm dia
10
-
-
32 mm dia
8
-
-
Providing and fixing GI pipes complete (IS:1239 medium class) with GI fittings conforming to IS : 1879 and clamps including MS pipe supports, painting with two or more coats of synthetic enamel paint including one coat of primer as per specification cutting and making good the walls etc. complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. INTERNAL WORK - EXPOSED ON WALL
For 65 mm dia Pipe as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
40
-
-
Providing and fixing C.I. butterfly valves Lever operated PN-1.6 complete with bolts, nuts, 1.5 mm thick compressed asbestos gasket and two nos flanges as per Table “E” complete. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 65 mm dia nominal bore
5
-
-
Name of Work:- General Electrical wiring, UPS wiring & LAN Cabling in admin block -01,admin block 2,training block and boys and girls Hostel, Solar Lights, Drinking water Facilities (Package No.-3) ( the Contractor to include cost of Designing including taking approval of design from the Engineer in charge in the mentioned items below-:)
-
-
-
SUB HEAD - I: CIRCUIT CUM POINT WIRING (SWITCH CONTROL LIGHT POINTS)
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Group C
75
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without Independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (Switch Control Secondary Points) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Group C
100
-
-
MCB CONTROL LIGHT POINTS
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Primary point controlled by one MCB. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
30
-
-
Same as item above but Secondary point. i.e. Points to be looped with Primary point with 2.5 sqmm wire and Point wiring as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
30
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
450
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
90
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
300
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
175
-
-
2 x 10 sq. mm + 1 x 10 sq.mm earth wire
90
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
80
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
70
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 Amp modular socket outlet and 5/6 A modular switch, connection etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
90
-
-
Supply and Wiring for 250 volts single phase and neutral 2 Nos 6 amps socket outlate with control by 1 No switched with 2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 2mm thick PVC conduit including providing and fixing of 6 amps 3 pin switch socket outlet of aprpoved make and design in 2 mm thick GI box with grid plate and earthing of third pin of the socket with 2.5 Sq. mm PVC insulated copper conductor stranded flexible FRLS wire.(maximum four no. of switches socket shall be connected on one circuit) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
50
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
45
-
-
Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 63 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Supplying and fixing 80 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 80 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required. (AC's & Gysers) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
10
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Telephone socket outlet
15
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
1 or 2 Module (75mmX75mm)
8
-
-
6 module (78mm X 205 mm X 50 mm)
8
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 3 pin , 5/6 amps socket outlet
8
-
-
5/6 amps switch
8
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 25 mm
75
-
-
32 mm
50
-
-
SUBHEAD - II - FITTINGS & FIXTURES
-
-
-
Supply, Installation, Testing and Commissioning of 10 W Bulk head Light. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 5W Mirror Light. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 18W Surface/Recessed Mounted LED circular Downlighter. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 18/20W Wall/Surface mouted 4 ft. LED as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 15W Surface mounted LED Square Downlighter (Cat no-Bajaj Lighting BGSLO SLEEK SURFACE 15W WH SQ or equivalent as specified in the approved list of make) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 36W (Nominal) 2x2 ft Recess Mounted LED Luminaire (Cat no- Bajaj Lighting BCTBLR 42W ZTN WH or equivalent as specified in the approved list of make.) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 12/9W Recessed mounted LED circular Downlighter (Cat no-Bajaj Lighting BGSLO SLEEK SURFACE 12W WH RD or equivalent as specified in the approved list of make) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 65W (Nominal) Recessed mounted LED Luminaire (Cat no- Bajaj Lighting or Equivalent) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 5W/mtr. Cove light as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan,making good the damages, connections, testing and commissioning etc. as required: of Approved Make Exhaust Fan, Heavy duty, 300 mm sweep as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 50 Liter capacity water heater (Cat-A)
12
-
-
SUBHEAD - III - DISTRIBUTION BOARDS ( The contractor to include in cost designing of the distribution boards including SLD )
-
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 12 way, Double door
3
-
-
Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 8 way (4 + 24), Double door
3
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required . (Note :Vertical type MCB TPDB is normally used where 3 phase outlets are required.) as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 12 way (4 + 36), Double door
3
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. Single Pole
5
-
-
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 40 A
5
-
-
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 63 A
5
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 40 A
5
-
-
63 A
5
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
5
-
-
SUBHEAD - IV- UPS SYSTEM
-
-
-
UPS SYSTEM:-
Supply, installation, Testing and commissioning of the following rating UPS as per specifications and complete in all respects.
15 KVA UPS 3 phase (415 V + 15%) Volts input & 3 phase output (415 V + 1%), 50 Hz, IGBT based technology, Input harmonic Current THD =3% typical at 100% load, ,=6% maximum at 100% load with inbuilt Isolation Transformer and 30 min battery backup for each UPS along with battery cabinet, Parallel card, BMS Port & communication card complete in all respect including supporting steel structure for UPS and Battery as required.Quoted price shall be inclusive of required rating single core copper conductor cable including terminations,connections of UPS to batteries etc complete in all respect and as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 15KVA (3 phase in/ 3 phase out)
1
-
-
SUBHEAD - V - DATA NETWORKING V(STRUCTURE CABLING SYSTEM PASSIVE)
-
-
-
Design,Supplying and drawing of UTP 4 pair CAT6 LAN cable in the existing surface /recessed steel /PVC conduit as required (1 run of cable). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
300
-
-
Design,Supply , Installtion , Testing and comissioning of armoured 6 core Singlemode OFC cable for interfloor switch connectivity. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
75
-
-
Design,Supply , Installtion , Testing and comissioning of 48 port loaded LIU with adaptor plates , pigtel cables for connections. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
4
-
-
Design,Supply , Installtion , Testing and comissioning of LC-LC singlemode fiber patch cord. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
4
-
-
Design,Supply , Installtion , Testing and comissioning of CAT6 information outlet (I/O) for Data, Voice, CCTV & Wi-Fi rack. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
200
-
-
Design,Supply , Installtion , Testing and comissioning of loaded 48 port CAT6 jack panel for CAT6 cable termination. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Design,Supply , Installtion , Testing and comissioning of CAT6 patch cord 3 feet for rack side switch termination for user End. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
75
-
-
Design,Supply , Installtion , Testing and comissioning of CAT6 patch cord 7 feet for user termination to information outlet Rack End. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
75
-
-
Design,Supply , Installtion , Testing and comissioning of 42 U Wall mount rack with fans , 2 Nos of hardware pkts. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Design,Supply, installation, testing and commissioning of Single Mode 1G SFP Module compatible with above switches. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
3
-
-
Design ,Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge. 25 mm
300
-
-
32 mm
150
-
-
Solar Lights Design ,Supply, Installation & Commissioning of Solar PV stand alone Street Lighting System comprising of two 37 Wp / one 74 Wp SPV module, one 12 V, 75 Ah Tubular Plate sealed maintenance free VRLA Gel Battery, one luminaries with inbuilt inverter, dusk to dawn circuit for automatic switching on & off at dusk & dawn and 24 W LED Light, pole, one charge-regulator, module mounting structure, Pole mounted Battery box, cables and other fittings along with 5 (five) years guarantee / warranty period (25 years for SPV Module). as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
7
-
-
Drinking Water facility
Providing & Fixing water purifier cum water cooler made of stainless steel having storage capacity of 80 liter & cooling capacity 60 liter / hour with Reverse osmosis system & ultra voilet membrane TDS reduction 90% having automatic back wash system with filteration unit & all other required accessories complete in all respect as per direction of the engineer in charge. as complete in all respect including with all lead and lift as per direction and satisfaction of Engineer-in-charge.
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements