Ropeway And Rapid Transport System Development Corporation HP Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Ropeway And Rapid Transport System Development Corporation HP Limited - RTDC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 Jan 2022
Closing Date28 Jan 2022
Tender Amount₹ 11,96,872
Costs
EMD
₹ 25,000Document Cost
₹ 590Tender Fee
Refer Documents
Summary
Construction /renovation Of Book Cafe At Chaura Maidan Shimla
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_RTDCH_55900_1Bid Award Id
ViewTender No
RTDC/BC Chaura Maidan/2021/8456 dtd 19/01/22Tender Authority
Ropeway And Rapid Transport System Development Corporation HP Limited ViewPurchaser Address
-Website
http://hptenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Consruction of dry Rubble Masonry in Breast Wall and Retaining Wall Rebutment Walls and parapets etc. as directed by Engineer-in-Charge
96.07
-
-
Providing and fixing P.V.C. pipe 100 mm inner dia at 1.5 m staggered distance at a slope of 1:6 in retaining wall Back Side of Retaining wall as directed by Engineer-in-Charge
16.66
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m as directed by Engineer-in-Charge
14.26
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (For Poles) SHS( 100x100x6mm) as directed by Engineer-in-Charge
2823.9
-
-
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer Hand Rail (Circular Hollow Section Outer Dia =26.90 mm and 2.9 mm thick) as directed by Engineer-in-Charge
231.16
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) as directed by Engineer-in-Charge
70.55
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separat(Sal Wood) as directed by Engineer-in-Charge
0.51
-
-
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron hinges with necessaryu screws. 45 mm thick 2nd Class Deodar wood work as directed by Engineer-in-Charge
8.33
-
-
15mm thick cement Plaste in Rough side of birck/Stone masonary in Cement Mortar 1:6 as directed by Engineer-in-Charge
141.1
-
-
Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site Under Floors of Room Kitchen and Bath Room as directed by Engineer-in-Charge
5.38
-
-
Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately). Under Floors of Room Kitchen and Bath Room as directed by Engineer-in-Charge
23.4
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Shelves and Suspended floors, roofs, landings, balconies and access platform(Cast in situ) kitchen as directed by Engineer-in-Charge
3.94
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)Shelf of kitchen as directed by Engineer-in-Charge
0.11
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as directed by Engineer-in-Charge
18.15
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Net Qty after Deduction(57.6-7.02=50.58) as directed by Engineer-in-Charge
50.58
-
-
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as directed by Engineer-in-Charge
8.42
-
-
Providing fixing ISI Marked Oxidized M.S. sliding door bolts with nuts and screws etc complete 300x16mm Doors as directed by Engineer-in-Charge
4
-
-
Providing and fixing ISI Marked oxidized M.S. Tower bolts (Barrel type ) with necessary screws etc. complete 200x10mm Door D and Door D1 as directed by Engineer-in-Charge
5
-
-
(150x10mm) Windows W, Windows W1 and Vent.V as directed by Engineer-in-Charge
11
-
-
Providing and fixing ISI Marked oxidized M.S. handles conforming to IS:4992 with the necessary screws etc complete For Doors(125mm) as directed by Engineer-in-Charge
8
-
-
For Windows and Vent.(75mm) as directed by Engineer-in-Charge
7
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer Room as directed by Engineer-in-Charge
59.7
-
-
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm) as directed by Engineer-in-Charge
60.23
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as directed by Engineer-in-Charge
27
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(For Kitchen shelf) Granite of any colour and shade Area of slab over 0.50 sqm as directed by Engineer-in-Charge
1.5
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore as directed by Engineer-in-Charge
9.6
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore as directed by Engineer-in-Charge
25
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore as directed by Engineer-in-Charge
1
-
-
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
1
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore as directed by Engineer-in-Charge
1
-
-
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore as directed by Engineer-in-Charge
4
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal bore Wash Basin
2
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore as directed by Engineer-in-Charge
3
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore as directed by Engineer-in-Charge
6
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid as directed by Engineer-in-Charge
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps as directed by Engineer-in-Charge
1
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm as directed by Engineer-in-Charge
1
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia as directed by Engineer-in-Charge
2
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as directed by Engineer-in-Charge
1
-
-
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete as directed by Engineer-in-Charge
1
-
-
Providing and fixing toilet paper holder : C.P. brass as directed by Engineer-in-Charge
1
-
-
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. as directed by Engineer-in-Charge
1
-
-
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gm as directed by Engineer-in-Charge
1
-
-
Providing and fixing soil, waste and vent pipes :100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (for toilet) as directed by Engineer-in-Charge
6
-
-
75mm dia( for kitchen) Centrifugally cast (spun) iron socketed pipe as per IS: 3989
9
-
-
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm dia pipe as directed by Engineer-in-Charge
2
-
-
75 mm dia pipe
4
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe as directed by Engineer-in-Charge
5
-
-
For 75 mm dia pipe
8
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989 (100 mm dia) as directed by Engineer-in-Charge
2
-
-
Sand cast iron S&S as per IS- 3989 (75 mm dia)
3
-
-
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :Stairs(Left Side of Building) in cement mortar as directed by Engineer-in-Charge
1.3
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1.3
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral as directed by Engineer-in-Charge
18.96
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).(Left Side Of Building)
14.53
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars 2.14 cum@1.05 Qtl/cum=225KG as directed by Engineer-in-Charge
225
-
-
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) as directed by Engineer-in-Charge
22.84
-
-
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthling the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. Group C as directed by Engineer-in-Charge
8
-
-
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthling as required as directed by Engineer-in-Charge
12
-
-
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthling as required as directed by Engineer-in-Charge
50
-
-
Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenol laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required as directed by Engineer-in-Charge
1
-
-
Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenol laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required. as directed by Engineer-in-Charge
1
-
-
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Single door-4 way as directed by Engineer-in-Charge
1
-
-
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A as directed by Engineer-in-Charge
2
-
-
Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A as directed by Engineer-in-Charge
1
-
-
Earthing with G.I. earth plate 600 mmx600 mmx 6 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required as directed by Engineer-in-Charge
2
-
-
Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required. as directed by Engineer-in-Charge
2
-
-
S/F Led Tubelight of syska or its equivalent approved make of complete with connections etc as required capable in all respects Led tube 8 watt as directed by Engineer-in-Charge
4
-
-
S/F Led Bulk head of syska or its equivalent approved make of complete with connections etc as required capable in all respects Led Bulk head 12 watt as directed by Engineer-in-Charge
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements