Public Works Department Tender

Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm (six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8 complete. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government, but excluding GST & including entire carriage of material with in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying of boulder apron laid in wire crates with 4mm (four millimetre) diametre G.I. wire conforming to IS: 280 and IS: 4826 in 100mm x 100mm (one hundred millimetre into one hundred millimetre) mesh (woven diagonally) including 10% (ten percent) extra for laps and joints laid with stones boulders weighting not less than 25 Kg. (twenty five kilogram) each as per drawing and technical specifications clause 1301 complete. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government, but excluding GST & including entire carriage of material with in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and erecting a "W" Metal Beam Crash Barrier comprising of 3mm (three millimetre) thick corrugated sheet metal beam guard rail 70cm (seventy centimetre) above road/ ground level fixed on ISMC series channel vertical posts 150x75x5mm thick (one hundred fifty into seventy five into five millimetre) spaced 2.00 (two point zero) metre centre to centre 1.80 metre (one point eight zero) high 1.10 metre (one point one zero) below ground/ road level all steel parts and fitments to be galvanised by hot deep process, all fittings to confirm to IS: 1364, metal beam guard rail to be fixed on the vertical posts with a spacer of channel section 150x75x5mm (one hundred fifty into seventy five into five millimetre), 330mm (three hundred thirty millimetre) long complete as per clause 811.3 MoRTH. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government, but excluding GST & including entire carriage of material with in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge..