Public Works Department Tender

Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 kg. per square metre (Zero point twenty five to zero point thirty) kilogramme per square metre on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical specification clause -503 including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying 25mm thick Bituminous concrete using crushed stone aggregates of specified grading 25mm (Twenty five millimetre) compacted thick with bitumnious binder VG-30 (Viscosity Grade -thirty) @ 5.50% (five decimal five zero pertcent of total mix weight) and lime filler 2% (percentage by weight of aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) with minimum 100-120 TPH capacity (hundred one twenty tonne per hour) hot mix batch type/ drum type plant with electronic control , transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 (eight-ten) tonne capacity or pneumatic type roller of 12-15(Twleve-fifteen tonne) with type pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-7(Six- eight) tonne smooth wheelded tandem rollers to achieve the desired compaction as per CPWD specification 2019, complete and as per directions of Engineer-in-charge including carriage of material within all leads and lifts and other incidentials.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (pug mill) carriage of mixed material by tipper to site, laying in uniform layers in sub-base/ base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100KN weight to achieve the desired density including lighting barricading and maintenance of diversion etc. as per tables 400.11 & 400.12 and technical specification clause 406. including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.