Public Works Department Tender

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with in all leads and lifts as per Technical Specification MORD 2014 Clause 1603.1and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transportation of un useful material for filling in road ways, camber, embankments for grade improvements and disposal of all unuseful material to required width of the road or on approved dumping sites by Engineer-in-Charge through all modes of transportation including head load or animal transport or mechanical means along with its levelling, fine dressing and carriage of machineries, materials, tools, equipements and safety measures and incidentals necessary to complete the work by mechanical means and or /labour if required. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per the direction of Engineer- in- charge including carriage of material with in all leads and lifts. including carriage of material with in all leads and lifts and other incidentals .The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Loosening of the ground upto a level of 300mm below the subgrade level, watered graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as MORD per technical Specification Clause 303.5.2 including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax goods service tax, labour cess or other taxes imposed by the Government.

Construction of gravel/soil aggergate sub base/base by providing well graded material of nominal maximum size grading 80mm as per table 2.3 of IRC SP 77-2008, Spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount approriate rotavator attachment and compaction with three wheel 80-100 KN Static roller capacity to achieve the desired density complete as per specifications contained in Para 2.2,3.6 and 3.7 of IRC SP 77-2008 including carriage of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , goods service tax, labour cess or other taxes imposed by the Government.