Public Works Department Tender

Providing, laying, spreading and compacting of stone aggregate of specific sizes to water bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 K.N. static Road roller in stages to proper grade and camber, applying and brooming, crushable screening at the rate of 0.22 cum ( zero point two cubic meters) per ten square meters, to fill up the interstices of coarse aggregate, watering and compacting to the required density grading –III, 53mm to 22.40 mm ( fifty three millimetres to twenty two point four zere millimetres)size, 75mm ( seventy five millimetre) compacted thickness as per M.O.R.D. technical specifications clause No. 405 including hauling of material in all leads, lifts as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-I) using emulsion pressure distributor at the rate 0.20 to 0.25 kg (zero point two zero to zero point ttwo five kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 503 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing, laying and rolling of clpse graded mix seal surfacing Material of 25mm ( Twenty five millimeter) thickness composed of 11.2 mm to 0.9mm ( Eleven point two Millimeter to Zero point Nine Millimeter) ( type-A) 0.338 Kg/Per ten square meter aggregates using penetration grade bitumen @ ie binders content @ 27.50 kg/10 sqm or 5.11 % by weight and minimum density of mss should be 2.10gm/cc to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity and finishing to required level and grades as per tehnical specification clause 509 including all leads, lifts and carriage of materials completed as per entire satisfaction of the Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, toll tax, GST or any other taxes imposed by the Government.