Public Works Department Tender

Providing laying and rolling of open graded premix carpet of 20mm (twenty millimeter) thickness compossed of 13.2mm to 5.6 mm(thirteen point two millimeterto dive point six millimeter) aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on previously prepared base, including mixing in a suitable plant, laying and rolling with three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat either Type A as per technical Specification Clause 508. By mechanical means bitumen (S-90)/VG-10, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying seal coat sealing the voids in bituminous surface laid to the specified levels, grade and cross fall using Type B as per technical specification clause 510 by mechanical means bitumen (S-90)/VG-10, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.

Earthwork in excavation by mechanical means ( Hyderaulic excavator ) / manual means in foundation trenches or drain on plan including dressing of sides and remming of bottms, includding geeting out the excavated soil and disposal of surplus excavated soil and directed all kinds of soil , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying of boulder apron laid in wire crates with 4mm (four millimeter) diameter GI wire conforming to IS: 280 and IS: 4826 in 100mm x 100mm (Hundred millimeter into hundred millimeter) mesh (woven diagonally) including 10 percent extra for laps and joints laid with stone boulders weighting not less than 25kg (twenty filve kilograme each as per drawing and technical specification Clause 1301, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.