Public Works Department Tender

Providing and laying cement concrete 1:5:10 (1 cement : 5 sand :10 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work including carriage of materials within all leads and lifts.: In Foundation and plinth

15mm (Fifteen milimetres) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) within all leads, lifts of materials and other incidentals.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 75 mm Type-B

Collar

Plain Bend

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110 mm X 90 mm. (Item of Schedule 2009)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of materials within all leads and lifts.For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) including carriage of materials within all leads and lifts and as per directions of Engineer-in-charge.

Providing and fixing polycarbonatd tranparent sheet 4.00mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts.

Providing and fixing prelaminated high pressure laminated board or graded wood particle board 12 mm thick complete as per Architect drawings and by the Engineer-in-Charge including carriage of materials within all leads and lifts.

Providing and fixing aluminium grills anodised powder coated pattern to existing window/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat digonally in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) including carriage of materials within all leads and lifts.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5 mm thickness (weight not less than 12.5 kg/ sqm) including carriage of materials within all leads and lifts.

Fixing and fixing frosted glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts as per direction of Engineer-in-charge :-Plain Glass 5mm thick.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete 200x65x2.12 mm including carriage of materials within all leads and lifts.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 200 mm including carriage of materials within all leads and lifts.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :- 150*10 mm including carriage of materials within all leads and lifts.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete including carriage of materials within all leads and lifts.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts.

Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts.

Providing and fixing 9mm thick water proof shuttering ply of standard quality ISI mark and approved shade and colour in panelling/flooring/cup-board and wall linning including mitring at junctions, butt measured and paid for separately) complete including carriage of material within all leads and lifts.

Providing and fixing 1.00mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts.

Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts.

Providing foam with covering of leathrite material of defined shape and size 3070*470mm as per direction of Engineer in charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 125 mm including carriage of materials within all leads and lifts.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts.

Providing and fixing frosted glass film on glass panes wherever necessary including carriage of materials within all leads and lifts as per direction of Engineer-in-charge :-Plain Glass 5mm thick.

Providing and fixing steel sink 610mmx460mmx150mm steel kitchen sink with C.I. or M.S. brackets and other required accessories required for fitting including cutting holes in walls and making good the same including fitting etc. complete including carriage of materials within all leads and lifts.

Providing and fixing PVC Finolex type "A" floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:-110mm X 90mm.

Providing and fixing 32mm dia C.P. waste coupling for wash basin or sink including carriage of materials within all leads and lifts:-

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm

Providing and fixing PTMT liquid soap container 109 mm wide, 200 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Providing and fixing 45cms length PVC connection pipe with union including carriage of materials within all leads and lifts :- 15mm nominal bore.

Providing & fixing central hole wash basin mixer with regular spout with out popup waste system with 425mm with long braded hoses including carriage of materials within all leads and lifts.

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing and fixing C.P. brass Angle cock with CP flange of approved quality conforming to IS:8931 :-15 mm nominal bore including carriage of materials within all leads and lifts.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110 mm

Collar 110mm

Door Bend 110mm

Plain Bend 110mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes Concealed work, including cutting chases and making good the walls etc.

Providing and fixing frosted glass film on glass panes wherever necessary including carriage of materials within all leads and lifts as per direction of Engineer-in-charge :-Plain Glass 5mm thick.