Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date18 Jul 2024
Closing Date24 Jul 2024
Tender Amount₹ 40,99,106
Costs
EMD
₹ 82,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_90686_1Bid Award Id
ViewTender No
2888-95 dt. 10-07-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. up to 200 mm in thickness
63.69
-
-
Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding one metre in depth in all heights from floor
80.16
-
-
Columns, pillars, posts and struts Square, rectangular or polygonal in plan
60.48
-
-
form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
95.37
-
-
Providing and laying cement concrete 1 : 4 : 8 (one cement : four sand : eight graded crushed stone aggregate 40 mm (forty milimetre) (Forty millimetre nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
4.86
-
-
Providing and laying cement concrete 1 : 5 : 10 (one cement : five sand : ten graded crushed stone aggregate 40 mm (forty milimetre) (Forty millimetre nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
50.42
-
-
Providing weep hole in brick masonry / stone masonry /plain reinforced concrete abutment wing wall return wall with 100 mm (one hundred milimetre) ( one hundred millimetre ) dia PVC pipe extended through the full width of the structures with slope of 1 (v) :20 (H) towards drawing face complete as per drawing and technical specification clause 614,709& 1204.3.7 with in all leads, lifts and other incidentals as per direction of Engineer –in –Charge complete.
16
-
-
Providing and laying damp proof course 38mm thick with cement concrete 1:2:4 ( one cement:two sand:four stone aggregate 12.5mm nominal size) and curing complete.all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
7.74
-
-
Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg. (one point seven zero kilogramme) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
7.74
-
-
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand : three graded) stone aggregate 20 mm (twenty milimetre)nominal size) in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
0.55
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (i)All works upto plinth level.
25.23
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (ii)All works above plinth level upto floor V level.Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design
mix is payable/recoverable separately).
25.18
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
9205
-
-
Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in Retaining walls/Breast walls including rakingout joints in Cement Mortar 1:6(One Cement: six Sand) complete including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
10.8
-
-
Random rubble masonry (un-coursed/ brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1 : 6 : 12 (one cement : six sand : twelve graded crushed stone aggregate 20 mm (twenty milimetre)(twenty milimetre( (Twenty millimetre) nominal size) at plinth level including racking out joints in cement mortar 1: 6 (one cement : six sand) including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
1.04
-
-
Stone filling dry hand packed tightly as under floor with including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
10.63
-
-
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor
any level in cement mortar 1:6 (one cement : six coarse sand) in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
16.49
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor any level. Cement Mortar 1:4(one cement:four sand) Second Class Bricks with including carriage of material in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
105.16
-
-
Providing and fixing 18 mm (Eght milimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty milimetre)(twenty milimetre thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete Area of slab over 0.50 sqm (zero point five zero square meter) at all levels. in all lead, lifts carriage of materials and other incidential complete .
2.64
-
-
Providing edge moulding to 18 mm (Eght milimetre) (eghty milimetre) thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete Granite work n all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
7.26
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1.53
-
-
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, Butt hinges and necessary screws shall be paid separately) Second class Deodar wood in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
13.31
-
-
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm (twenty five milimetre) to 40 mm (forty milimetre) (forty milimetre) thick : in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.Float glass panes 5.0 mm (five point zero milimetre) thick glass panes (weight not less than 12.5 kg per sqm) as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
33.65
-
-
Float glass panes 4 mm (four milimetre) (four milimetr) thick glass pane (weight not less than 10 kg per sqm) in all leads, lifts and other incidentals.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
3.62
-
-
Second class Deodar wood
2.1
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws in all leads, lifts and other incidentals.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
14.08
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm (twenty five milimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
14.08
-
-
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (four milimetre) in both directions with wire of dia 0.63 mm, (zero point six three milimetre) for doors, windows and clerestory windows with hinges and necessary screws : 35 mm (therty five milimetre) thick shutters With ISI marked stainless steel butt hinges of required size. In 1st class deodar wood in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
8.58
-
-
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm (one point two five milimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm (twenty milimetre)(twenty milimetre) dia
24.8
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. "Fixed to openings /wooden frames with rawl plugs screws etc."in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
602.64
-
-
Providing 40x5 mm flat iron hold fast 40 cm (forty centimeter) long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20 mm (twenty milimetre)(twenty milimetre( (twenty milimetre) nominal size). in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
45
-
-
Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. one hundred five zero milimetre) fifty milimetre)(one hundred fifty milimetre) in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
3
-
-
Providing and fixing bright finished brass 100 mm (one hundred milimetre) (one hundred) mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
4
-
-
Providing and fixing corrosion resistant AISI-Grade stainless steel Door Stoper with twin rubber stopper and screws etc. complete. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
5
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg (thrty five kilogramme)and door width upto 700 mm)(Seven hundred milimetre) with necessary accessories and screws etc. complete.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1
-
-
Providing and fixing corrosion resistant AISI-Grade stainless steel Handles with necessary screws etc. complete. 125mm (One hundred twenty five milimetre)in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.( I )125mm (One hundred twenty five milimetre)
16
-
-
( I )100 mm (one hundred milimetre) (One hundred milimetre)
46
-
-
Providing and fixing corrosion resistant AISI-Grade stainless steel sliding door bolts with nuts and screws etc. complete. (ii) 250x16 mm (six milimetre) (two hundred five zero into sixteen milimetre)
1
-
-
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (i) 200x10 mm (two hundred into ten milimetre)
84
-
-
Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. 40 mm (forty milimetre) (forty milimetre)in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
5
-
-
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm (one hundred twenty five milimetre)in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
15
-
-
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
5
-
-
Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50 mm (five zero into five zero milimetre) (base and height)in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
16.3
-
-
Providing and Fixing 8mm thick wooden Laminated flooring made in superior water Resistant High Density hard wood fibre board make action tesa of approved shade including fixing with all accessories as per drawing and direction of Engineer in charge.
15.27
-
-
Providing and fixing 19 mm (ninteen milimetre) thick water proof termite resistant commercial board box including shelves and shutters, the back side cup board / cabinet shall be 8 mm (Eght milimetre) (Eght milimetre)thick ply and all the cut portions of shelves shall be finished with 6 mm (six milimetre)thick hard wood edging. The cut portion of shutters from all sides shall also be finished with 12 mm (tweleve milimetre) thick hard wood edging. The shutter from out side shall be finished with 4 mm (four milimetre)thick vaneer Ply of approved shade to match with panelling including stainless steel hinges hinges and magnetic catcher with in all accessories etc. complete as per detailed drawing as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
10.08
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
3739.75
-
-
P/F ornamental screen of Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel, hollow sections, black sheet i/ cutting of sheet asper design, complete as per drawings in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
130.68
-
-
Providing and fixing M.S. BP Sheet 1.66mm (one point six six milimetre) to 2mm (two milimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
43.27
-
-
Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm (forty milimetre) thick with 20 mm (twenty milimetre)nominal size stone sqm aggregate in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
13.88
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred milimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetre)thick cement mortar 1:4 (one cement : four coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kilogramme) including pointing the joints with white cement and matching pigment etc., complete. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
7.47
-
-
Providing And fixing glazed Digital tiles 300x600 x 8 mm (three hundred into six hundred into Eght milimetre) thick of approved Shade and manufacturer in skirting risers of steps and dado 12 mm (tweleve milimetre) thick cement mortar 1:3(one cement :three sand) and jointed with cement slurry.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
42.66
-
-
Providing and laying anti skid matte finish full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm (twenty milimetre)(twenty milimetre( thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme) including grouting the joints with white cement and matching pigments etc., complete : in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.Tile size 600 X 600 mm (six hundred into six hundred milimetre)
74.47
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (tweleve milimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete : in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.Size of tile 600x600 mm (six hundred into six hundred milimetre)
8.58
-
-
Providing and laying full body vitrified floor tiles out of single piece tread 30X150 cm with anti skid pattern (with matt finish)of approved shade of jhonson/kajaria/AGL/RAK or equavalent, (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm (twenty milimetre)(twenty milimetre( thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme) including grouting the joints with white cement and matching pigments etc., complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
0.81
-
-
Providing and laying full body Vitrified tiles out of single piece riser 20X150cm (twenty into one hundred fifty centymetre) with anti skid pattern matt finish in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (tweleve milimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogramme) including grouting the joint with white cement & matching pigments etc. complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
0.67
-
-
Extra for lining out plaster to imitate stone or concrete blocks walling.
49.03
-
-
Providing and fixing 0.62mm (zero point six two milimetre) thick troughed prepainted steel sheet roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating, i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
149.59
-
-
Providing and fixing ridges or hips 60 cm overall with 0.62mm (zero point six two milimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.
28.58
-
-
Providing and fixing valley 90 cm overall 0.62mm (zero point six two milimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.
11
-
-
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) : 6 mm (six milimetre)thick Cement bonded wood particle board as per IS:14276 in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
14.63
-
-
15 mm (fifteen milimetre) cement plaster on rough side of single or half brick wall of mix: 1:6 (one cement: six coarse sand)
321.32
-
-
6mm cement plaster of mix: 1:3 (one cement :three Fine sand)
66.86
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
81.49
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
250.89
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.: New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. : New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
70.43
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
58.25
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
56.11
-
-
French spirit polishing : Two or more coats on new works including a coat of wood filler
14.08
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
388.18
-
-
Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
250.89
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm (fifty milimetre)thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge.
12
-
-
Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying of 10cm (ten centimetre) cement concrete 1:5:10 (one cement: five sand : ten graded crushed stone aggregate 40mm (forty millimetre) nominal size and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20 mm (twenty milimetre)(twenty milimetre( (twenty millimetre) nominal size) and finished with a floating coat of neat cement and curing complete as per standard design as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
46.26
-
-
Providing plinth protection 50mm (fifty milimetre)thick in cement concrete 1:3:6 (one cement : three sand : six graded stone aggregated 20 mm (twenty milimetre)(twenty milimetre( nominal size in all leads and lifts and other incidentials complete and as per the entire satisfaction and direction of Engineer-in-Charge.
20.01
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work( a ) 20 mm (twenty milimetre)nominal bore
19.5
-
-
( b ) 32mm (therty two milimetre) nominal bore
3
-
-
( c ) 15 mm (fifteen milimetre) nominal bore
8
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :. 25 to 40 mm (forty milimetre) (twenty five to forty milimetre) nominal bore
1
-
-
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
1
-
-
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre (one point zero metre)spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.( ii ) 2025 (25 mm OD) pipe
24.6
-
-
(iii) 1620 (20 mm (twenty milimetre)OD) pipe
11.5
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred milimetre) sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan no.C0117 of size 580x440 mm (forty milimetre) with integral type foot rests of peryware/jaquare/Hindware/Cera or its equivalentin all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1
-
-
Providing and fixing white vitreous china Angel C8915 wall mounting water closet of size 455x355x355 mm (for hundred fifty five into three hundred fifty five into three hundred fifty five milimetre) of approved shape including seat cover, and cistern fittings, nuts,bolts and gasket etc of Perryware , Cera,Jaquar, Hindware or equivelent complete as per direction Engineer-in-charge.
1
-
-
Providing and fixing Single piece slim concealed cistern with floor mounting frame installation kit and S-type Drain pipe conection set for wall hung WC (without flush control Plate) JCS-WHT-2400FS of Jaquar or equivalent in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1
-
-
Providing and fixing Flushing Plate Control palate vignette prime (JCP-CHR-812415) Jaquar or equavalent
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen milimetre), 32 mm (therty two milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin cat. no.Shine C8863 size 505x 405 x155 mm (five hundred zero five into four hundred zero five into one hundred fifty five milimetre) of Perryware , Cera,Jaquar, Hindware or its equivalent with single 15 mm (fifteen milimetre) C.P. brass pillar tap of opel series of Jaquar or its equivalent. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and fixing white vitreous china pedestal of cera or its equivalent for wash basin completely recessed at the back for the each reception of pipes and fittings. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty milimetre), including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain : 610x460 mm ( six hundred one zero into four hundred six zero milimetre)bowl depth 200in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32mm (therty two milimetre) dia in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
3
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm (forty five centymetre)length 15 mm (fifteen milimetre) nominal bore
6
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work ) in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.15mm (fifteen milimetre) nominal bore
2
-
-
20 mm (twenty milimetre)nominal bore
3
-
-
Providing and fixing 600x450 mm six hundred one zero into four hundred five zero milimetre)beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six milimetre)thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and fixing C.P. brass long nose bib cock Cat no.OPP -15037PM Jaquar or equivalent single control of approved quality conforming to IS standards. 15 mm (fifteen milimetre) nominal bore in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
7
-
-
Providing and Fixing single lever basin mixer single control cat. No. OPP-15011 BPM of Jaquar or equivalent complete. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and Fixing Concealed stop cock with wall flange of opel prime no. OPP- 15083KPM Stop Cock PM single control of jaquar or equavalent complete .in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and Fixing Angular stop cock with wall flange of opel prime no. OPP-15053PM jaquar or equavalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge..
10
-
-
Providing and Fixing Concealed body for single lever high flow diverter with button assembly ,cartridge sleeve but without exposed parts of jaquar or equavalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge..
2
-
-
Providing and Fixing single lever exposed part kit of high flow diverter consistimg of operating lever wall flange with seals and button cat.no. OPP-15079 KPM of jaquar or equavalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and Fixing overhead shower one hundred five zero milimetre) (fifty milimetre)round shape single flow (body and face plate tainless steel with crome finish ) with rubit cleaning system cat.no. OHS-CHR-1603 of jaquar or equavalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and Fixing shower Arm 20 mm (twenty milimetre)(twenty milimetre( &450mm fifty milimetre)long round shape with 90 degree bend wall mounted showers with flange cat.no. SHA-CHR-479L450 of jaquar or equavalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and fixing single lever sink mixer with swimging spout on upper side with connecting legs and wall flanges cat no.VGP 81165 Jaquar equavalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1
-
-
Providing and Fixing Soap dish recessed type stainless steel AHS-CHR-1531 of Jaquar or equivalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
3
-
-
Providing and fixing C P single towel rail 600 mm long, with concealed fittings arrangement cat. No. ACN-CHR-1111SM of Jaquar or equivalent in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
P/F Glass shelf 600 mm long with C.P. Brass bracket . AKP-CHR-35771P of Jaquar or equivalent fixed with C.P. Brass screws etc complete.in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and fixing 8 mm (Eght milimetre) dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
1
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm (twenty milimetre)(twenty milimetre) in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and Fixing Toilet paper holder recessed type stainless steel cat. No. AHS-CHR-1553 of Jaquar or equivalent complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Providing and placing on terrace (at all floor levels) Polyethelene water storage Tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1000
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm (fifteen milimetre) nominal bore in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
1
-
-
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred one zero milimetre) in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.100 mm (one hundred milimetre)
36
-
-
one hundred five zero milimetre)
20
-
-
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm (one hundred one zero into nine zero milimetre) in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
7
-
-
Providing and fixing PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.I) 110mm (one hundred one zero milimetre) dia
3
-
-
Providing and fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete.I) 110mm (one hundred one zero milimetre) dia
6
-
-
Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete.I) 110mm (one hundred one zero milimetre) dia
3
-
-
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.I) 110mm (one hundred one zero milimetre) dia
2
-
-
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete.I) 110mm (one hundred one zero milimetre) dia
4
-
-
Providing and fixing PVC Cawl ISI marked of approved design with steel screws and rawal plugs etc. complete.I) 110mm (one hundred one zero milimetre) dia
2
-
-
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.I) 110mm (one hundred one zero milimetre) dia
8
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slabwith 1:1.5:3 mix (one cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm (twenty milimetre)nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : 8 graded stone aggregate 40 mm (forty milimetre) nominal size), inside plastering 12 mm (tweleve milimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty milimetre)nominal size) finished with a floating coat of neat cement complete as per standard design : in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.Inside size 90x80 cm (nine zero into eght zero centymetre) and 45 cm (four five centymetre) deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kg (fifteen kilogramme) : in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.With Sewer bricks conforming to IS : 4885
3
-
-
Constructing soak pit 1.20x1.20x1.20 m (one point two zero into one point two zero into one point two zero metre) filled with brick bats including S.W. drain pipe 100 mm (one hundred milimetre) diameter and 1.20 m one point two zero metre) long complete as per standard design. in all lead, lifts and other incidentals as per direction of Engineer-in-Charge.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements