Public Works Department Tender

Providing weep holes in brick masonry/plain /reinforced concrete abutments, wing wall/ return wall, retaining walls and breast walls etcetra with 100mm (One Hundred millimeter) diamere PVC pipe make of D-Plast/Relpipe, working pressure not less then 4.50 Kg/Sq. cm. (four point five zero kilogram per square centimetre) , extending through the full width of the structure with slope of 1V:20H (One vertical : twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700 and 1200 and as per the directions and entire satisfactions of Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, Nominal mix 1:3:6 (one cement into three sand into six graded crushed stone aggregate (40mm) forty millimeters nominal size) on ground or under water in open foundations and the like for all types of structures, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, including cost of form work and curing complete as per drawing and MORD technical specification section 800, 900, 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Nominal mix 1:2½:5 (one cement into two and half sand into five graded crushed stone aggregate (40mm) forty millimeters nominal size) on ground or under water in sub-structure and the like for all types of structures, including pumping or bailing out water/ dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water in abutment, return walls etcetera including cost of form work and curing complete as per MORD technical specification section 800, 900 and 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade-M-20 (M-Twenty) Design mix with minimum cement contents not less than 350 kgs. (three hundred fifty kilograms) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in bed block, dirt wall, Kerbs and the like etcetera for all heights, including cost of form work and curing complete but excluding the cost of reinforcement for reinforced cement concrete work as per MORD technical specification section 800, 900 and 1200 complete and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure Grade-M25 (M-Twenty Five) design mix with minimum cement contents not less than 400 kgs. (four hundred kilograms) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in Deck slab and the like up to all heights, including cost of form work and curing complete but excluding the cost of reinforcement for Reinforced concrete work as per drawing and MORD technical specification section 800, 900 and 1400 complete and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement of TATA, SAIL,RINL, JINDAL PANTHER MAKE in super structure complete as per drawing and MORD technical specifications Clause section 1000 and 1400 including cutting, bending, binding and placing in position complete in all respect in all respect including cost of binding wire upto any heights as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade-M20 (M-Twenty) design mix having cement contents not less than 350 Kg (Three hundred fiftty kilogram) per cubic metre with 20mm (Twenty millimetre) nominal size graded crushed stone aggregate and curing complete for all heights/depths including cost of form work as per drawing and MORD technical specificationsection 800, 900 and 1200 in open foundation for all type of structure complete and as per the direction and the entire satisfaction of Engineer-in-Charge, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete for all heights/depths and any quantum of water complete including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and laying (to level or slope) 900mm dia (Nine hundred millimetre) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding type-A concrete craddle bedding M-15 (Fifteen) grade in single row including fixing collar with cement mortar 1:2 (One cement isto two sand) but excluding the cost of excavation, protection works, back filling, bedding concrete and masonry work in head walls and parapets as per drawing and MORD technical specifications section 1100 and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate is including Octroi, Royality, Malkana, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Construction of gravel/soil aggregate sub base/base by providing well graded material of nominal maximum size grading 80mm (eighty millimetre) as per table 2.3 of IRC SP 77-2008. spreading in uniforms layers with tractor mount appropriate grading arrangements on prepared surface. mixing by mix in place method at OMC with tractor mount appropriate rotavator attachement and compaction with three wheel 80-100 KN static roller capacity to achieve the desired complete as per specifications contained in para 2.2, 3.6 and 3.7 of IRC SP-77-2008 and as per the direction of Engineer-in Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing, laying, spreading and compacting crushed graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site. laying in uniform layers in sub-base base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and MORD 2014 Technical Specification Clause 406 in two layers and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and laying factory made chamfered edge Cement Concrete paver blocks 80mm (Eighty millimetre) thick of M-30 (thirty) grade with approved color design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm(fifty millimetre) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete as per CPWD specification 2019 including carriage of materials up to all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana,G.S.T, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and Laying parapets with plain cement concrete 1:3:6 (one cement: three sand; six graded crushed stone aggregate 40mm (forty millimetres nominal size) in parapets and curing complete including the cost of form work with steel plates as per drawing and HP.PWD technical specfications in all respect including carriage of materials within all leads and lifts and other incidentals. The rate is including Octroi, Royality, Malkana, G.S.T, toll tax, goods service tax, labour cess or any other taxes imposed by the Government.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm (three milimetre) thick corrugated sheet metal beam rail, 70 cm (seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (one hundred fifty into seventy five into five milimetre) spaced 2 m (two metre) centre to centre, 1.8 m high (one point eight metre), 1.1 m (one point one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 (IS: one thousand three hundred sixty seven) and IS:1364 (IS: one thousand three hundred sixty four), metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm (one hundred fifty into seventy five into five milimetre), 330 mm (three hundred milimetre) long complete as as per MORTH Technical specification Clause 811. The rate shall include carriage of machineries, equipment, tolls and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction of Engineer-in-charge including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rate including Royality, Malkhana, G.S.T, Octroi, Goods Service tax, toll tax, sale tax or any other taxes imposed by the Government.