Public Works Department Tender

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished,machine cut for kitchen platforms, vanitycounters,window sills, facias and similar locations of requiredsize, approved shade, colour and texture laidover 20mm thickbase cementmortar 1:4 (1cement : 4coarsesand), joints treated with whitecement,mixedwithmatchingpigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade,8.2.2.2 Area of slab over 0.50 sqm (zero pointg fifty square metre).as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing edge moulding to 18 mm( eigteen millimetre) thick marble stone counters, Vanitiesetc., includingmachinepolishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.8.3.2 Granite work.as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade.7.38.1 ( 8 mm (eight millimetre) thick (mirror polished and machine cut edge) 7.38.1.1 Granite stone of any colour and shade. as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 (ten) litre low level flushing cistern with fitting and brackets, 40 mm (forty millimetre) flush bend, 20 mm (twenty millimetre) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimetre) with a 15 mm (fifteen millimetre) CP Brass single hole basin mixer as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix:1:6 (one cement: six coarse sand)as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm,(one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50(fifty) grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two coats as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm (four millimetre) thick float glass panes, including ISI marked M.S. dressed butt hinges bright finished of required size with necessary screws.9.9.1 Second class teak wood 9.9.1.1 35 mm (thirty five millimetre) thick.as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four millimetre ) in both directions with wire of dia 0.63 mm, (zero point sixty three) for doors, windows and clerestory windows with hinges and necessary screws : 9.27.1 35 mm thirty five millimetre) thick shutters 9.27.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.1.1.1 Second class teak wood as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimetre) thick water proof termite resistant commercial board box including shelves and shutters, the back side cup board / cabinet shall be 8 mm (eight millimetre) thick ply and all the cut portions of shelves shall be finished with 6 mm (six millimetre) thick hard wood edging. The cut portion of shutters from all sides shall also be finished with 12 mm(twelve millimetre) thick hard wood edging. The shutter from all sides shall be finished with 4 mm (four millimetre) thick vaneer Ply of approved shade to match with panelling including stainless steel hinges and magnetic catcher with in all accessories etc. complete aas per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing cup board shutters 25 mm (twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm(twenty five millimetre) wide x12 mm (twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providingand fixing ISImarkedoxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :9.66.1 125 mm (one hundred twenty five millimetre) as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing special qualitybright finishedbrass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.9.79.2 50 mm (fifty millimetre) as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm (one hundred fifty into ten millimre)as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and supplying Lenovo or equivalent Desktop Premium 68.58cms (sixty eighty point fifty eighty centimetres) (27) all-in-one PC ThinkCentre M90a Pro Gen 4 (27, Intel) with 8 GB Ram and Up to 1TB SATA HDD complete as per satisfaction of Engineer-in-Charge within all leads and lifts complete as per HPPWD specifications as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and supplying and fixing Aquaguard Marvel NXT RO+UV+UF Taste Adjuster Water Purifier + Alkaline Bottle water purufier complete as per satisfaction of Engineer-in-Charge within all leads and lifts complete as per HPPWD specifications as per the direction of the Engineer-in-charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.