Public Works Department Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date25 Feb 2025
Closing Soon7 Mar 2025
Tender Amount₹ 1,38,08,880
Costs
EMD
₹ 2,75,800Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Govt Senior Secondary School At Sandhu Tehsil Theog Distt Shimla, Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_100659_1Tender No
THD/CB-tender/2024-25-13956-62Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
193.5
273
52825.5
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
280.99
500
140495
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts Circular upto all floor levels complete ncluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
249.48
437
109022.76
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral stair cases upto all floor levels complete ncluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
19.79
593
11735.47
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers upto all floor levels complete ncluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
401.27
429
172144.83
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including getting out the excavated soil and disposal of surplus excavated soils as directed, complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
154.66
449
69442.34
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
150.45
129
19408.05
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering: All work up to plinth level including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.(i)1:5:10 (One cement : five coarse sand): ten graded stone aggregate 40 mm(forty milimetre) nominal Size
65.24
5001
326265.24
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge.(i)1:4:8 (One cement : four coarse sand): eight graded stone aggregate 40 mm(forty milimetre) nominal Size)
7.02
5305
37241.1
... More
Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to all level :In retaining wall etc.1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size) upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
75.11
5788
434736.68
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level
193.95
8312
1612112.4
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works above plinth level upto all floor level
118.95
9560
1137162
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto upto all floor levels .Mild steel and Medium Tensile steel bars complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
43512
103
4481736
... More
Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar 1:2 (1 cement : 2 coarse sand), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm of earth laid over 15 mm of fine sand in case of suspended floor and bricks laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
256.66
128
32852.48
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1.5
1033
1549.5
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in : Cement mortar 1:4 (1 cement : 4 coarse sand) upto all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
81.67
1174
95880.58
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth l in all shapes and sizes in : in Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
22.61
8464
191371.04
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floors level in all shapes and sizes in : in Cement mortar 1:6 (1 cement : 6coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
67.04
9750
653640
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
5.82
4737
27569.34
... More
Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. completencluding carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
33.92
1425
48336
... More
Stone filling behind retaining walls complete including carriage of material in all leads and lifts as per direction of the Engineer- in -Charge.
11.1
1370
15207
... More
Supplying and filling brocken/crushed stone aggregate chipping of hard stone of 40 mm size including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
5.57
1212
6750.84
... More
Providing weep holes in brick masonry/stone masonry/plain concrete/reinfoced concrete, abutment, wing walls with 100 mm dia PVC pipe extending through the full length with of the structure with the slope of I (V) : 20 (H) towards drawing face complete as per drawing and technical specifications complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
37
244
9028
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. complete including carriage of material in all leads and lifts:- 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
22.24
3490
77617.6
... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
4.8
561
2692.8
... More
Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.including carriage of material in all leads and lifts as per direction of the Engineer - in - Charge.
822
131
107682
... More
Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
14.35
1673
24007.55
... More
Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
41.91
1097
45975.27
... More
Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
14.35
574
8236.9
... More
Providing and fixing 0.80 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
14.35
931
13359.85
... More
Providing and fixing square edged cover fillets (beading) 19 x 6 mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts.
188.6
55
10373
... More
Providing and fixing PGI Sheet 0.63mm thick lining with butt jointing and nails with necessary scwews complete as per Architectural drawing including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
10.53
903
9508.59
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. : 250mm x 10mm.
20
85
1700
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. : 200 X 10 mm
12
70
840
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :125mm.
30
48
1440
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. 75 mm.
31
42
1302
... More
Providing and fixing aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-300 X 16 mm
4
480
1920
... More
Providing and fixing aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge 250 X 16 mm.
7
431
3017
... More
Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete. ccomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge:-.150 mm
11
339
3729
... More
Providing & fixing 115 mm M.S bright finished brass hasps and stapples (safety type)with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
10
110
1100
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
20
43
860
... More
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
15
110
1650
... More
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 19 mm thick.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
233.22
1433
334204.26
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
30.37
1617
49108.29
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 x10 mmof 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
2.96
1352
4001.92
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm ./300x300 mm including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
43.57
1408
61346.56
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 605mm x 605mm. including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
6.02
1444
8692.88
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge:- 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
102.19
1295
132336.05
... More
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.Red Mandana stone including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
5.4
1330
7182
... More
Providing edge moulding to 18 mm thick marble/Kotah stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
48.1
208
10004.8
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble
8.65
4330
37454.5
... More
Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Glazed tiles 10 mm thick.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
44.62
1176
52473.12
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate including carriage of material within all leads and lifts as per direction of Engineer-in-charge
22.8
470
10716
... More
Providing and fixing Uni stone slab12.5 mm.cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3 (1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
115.05
1744
200647.2
... More
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with :. complete as per design approved by Engineer-in-Charge.
24
484
11616
... More
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
84.61
1266
107116.26
... More
Providing and fixing Flashing 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.:-Flashings/ Aprons.(Upto 600 mm)
66.4
620
41168
... More
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- 110mm diameter metre .
43.2
441
19051.2
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:- PVC bend 87.5° 110 mm bend.
10
328
3280
... More
roviding and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:-PVC Door bend 110 mm bend
8
364
2912
... More
roviding and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:-PVC plain shoe 110mm
8
295
2360
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- 110mm.
24
288
6912
... More
Providing and fixing MS BP sheet 2.00 mm thick in eves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( base members of steel work shall be measured and paid seperately ).
52.75
1993
105130.75
... More
Providing and fixing angle iron doors frames (Single rebate) manufactured from M.S. angle section of 35x35x4mm and M.S, flat 50x5 as per design and drawing including jambs, lock jambs beeds if required angles threshold of M.S. angle 50x5mm welded or rigidly fixed by mechanical means lugs with split ends tails to each jambs including steel butt hinges 2.5mm thick with a provision of locking arrangements and shock absorbers as specified and applying coat of approved steel primer after pre-treatment of the surfaces as directed by the Engineer-in-charge
55.5
486
26973
... More
Providing and fixing angle iron door frames manufactured from M.S.Angle iron section 25X25X5 mm thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 5X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb includingsteel butt hinges 2.5 mm thick with provision for locking arrangementand shock observer as specified and applying a coat of approved steel primer after preteatment of thesurface as directed by Engineer-in-Charge.
8.8
193
1698.4
... More
Providing and fixing steel window made of frame with M.S. channel 75mm X 40mm and M.S. flat 75mm X 4mm in combination welded together and standard section F-7B style of standard size with sash bar or T- section 25mm x 25mm x 3mm and angle iron 25mm x 3mm and joints metred and welded with 16mm x 3.5mm lugs 10cm long embeded in C.C. block 1 : 3 : 6 (1 cement : 3 sand : 6 stone aggregates) or with wooden plug and screw or rawl plug and screw or with clips or with bolts and nuts as required and MS iron fittings complete including p/f glass pan 4mm thick in glazed and wire gauge of designation 85 with 0.56mm dia in wire gauge panel with glazing clips and special metal sash putty of approved make complete and applying a coat of approved steel primer after pretreatment of the surface complete job in all respect as per architectural drawing including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
45.17
8325
376040.25
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2538
106
269028
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1473
136
200328
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- M.S. tube.
49.34
470
23189.8
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
7.95
8270
65746.5
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
359.68
140
50355.2
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
148.4
138
20479.2
... More
Wall painting with Satin enamel paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
431.96
111
47947.56
... More
6 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) up to all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
307.04
198
60793.92
... More
12mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) up to all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
429.12
246
105563.52
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) up to all floor levels complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
508.97
268
136403.96
... More
Distempering with Acrylic washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
221.47
110
24361.7
... More
Distempering with Acrylic washable distemper of approved brand and manufacture to give an even shade in ceiling and slopy roof :New work (two or more coats) over and including water thinnable priming coat with cement primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
307.04
116
35616.64
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
280.29
202
56618.58
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1165.28
85
99048.8
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
96.69
602
58207.38
... More
Providing and laying Cement concrete drain with cement concrete 1:3:6 ( 1 cement : 3 Sand : 6 graded stone aggregate 20 mm nominal size) mechanically mixed in open mix ed in open surface drain with plinth protection having internal size 20 x 15 cm & (twenty into fifteen centimter) with side wall of 10 cm ( ten centimter) thick & inside plastering with CM 1:3 including earthwork & finished with floating coat of neat cement complete as per standard design as per HPPWD specifiction 1990 volume -1 (one) including carriage of all labour equipments and materials to various location through complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
87.9
603
53003.7
... More
Providing and fixing 12mm thick Green chalk board (non-magnetic) of size 2.40x1.20 with superior quality framing specialy anodized aluminium profile 20x15mm with corners of black surface shall be non porus ceramic particles on the top green surface for smooth writing with chak over 11mm thick particle board which shall have baking materials of galvanised sheet 0.28mm thick approvimately. The board shall be fixed on the wall with specially designed J clump and square clumps with the help of nylone sleeves and screws as per site requirement.including carriage of all labour equipments and materials to various location through complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
14.4
2300
33120
... More
Providing and fixing 100 mm dia M.S. pipe embeded in CC. block 1:1.5:3 (30x30x40 cm.) including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (Base plate and welding charges etc. measured and paid for seprately)
35
1139
39865
... More
P/ F screen with main frame of size 50mmx50mm M.S. hollow square pipe section and distributing member of 25x25 mm M.S. hollow square pipe complete in all respect as per architectural drawing.
21.99
2852
62715.48
... More
Providing and fixing 45x45 cm M.S. bracket of frame work 50x50mm & 20mmx20mm M.S. Hollow sections alongwith 12mmx12mm solid square bars in combination as per detail i/c carriage of materials within all leads, lifts and other incidentals as per directions of Engineer- in- Charge.
50
1167
58350
... More
Providing and fixing wall bracket in verandah screen 23x23 cm M.S. bracket made of 2.00 mm thick M.S. sheet cut into shape and welded together with M.S.Flat 50x50x4 mm bracket as per detail i/c carriage of materials within all leads, lifts and other incidentals as per directions of Engineer- in- Charge.
38
794
30172
... More
Providing and fixing 20mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. External work
50
382
19100
... More
Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
30
351
10530
... More
Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
10
445
4450
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :25 to 40 mm nominal bore
1
596
596
... More
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (cost of water meter and stop cock to be paid separately).
1
510
510
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC. cover with frame (light duty) 455mm x 610mm internal dimensions, , R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: - Inside dimensions 455mm x 610mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50.
4
5087
20348
... More
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. 1216 (16 mm OD) pipe
68
425
28900
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.1000 lt. capacity
3000
8
25800
... More
Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:-110 mm x 90 mm
4
517
2068
... More
Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:- 110 mm x 75 mm
4
482
1928
... More
Providing and fixing High pressure PVC spigot and socked , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads an lifts :- 110mm dia
69.1
371
25636.1
... More
Providing and fixing High pressure PVC spigot and socked , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads an lifts :-75mm dia
34
326
11084
... More
Providing and laying 150 mm dia (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches including carriage of materials within all leads and lifts.
20
643
12860
... More
Providing and fixing M.S.holder bats including steel bolts to sand cast iron/cast (spun) iron pipes embeded in and including cement concrete blocks 100mm X 100 mm X 100 mm of 1:2:4 mix including cost of cutting holder and making good the wall 75 mm dia / size pipe including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
19
73
1387
... More
Providing and fixing M.S.holder bats including steel bolts to sand cast iron/cast (spun) iron pipes embeded in and including cement concrete blocks 100mm X 100 mm X 100 mm of 1:2:4 mix including cost of cutting holder and making good the wall 110mm dia / size pipe including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
19
94
1786
... More
Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-110 mm dia
4
350
1400
... More
Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-75 mm dia
4
280
1120
... More
Providing and fixing PVC door band with oval access door , insertion rubber washer 3mm thick bolts and nutsISI marked complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-110 mm dia
4
315
1260
... More
Providing and fixing PVC door band with oval access door , insertion rubber washer 3mm thick bolts and nutsISI marked complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts :- 75 mm dia
4
210
840
... More
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-75 mm dia
3
283
849
... More
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-110 mm dia
3
346
1038
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-75 mm dia
5
206
1030
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts :- 110 mm dia
5
248
1240
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-75 mm dia
6
290
1740
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-110 mm dia
8
332
2656
... More
Providing and fixing PVC cowl including carriage of materials within all leads and lifts :-75 mm nominal diametre :- including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
6
186
1116
... More
Providing and fixing PVC cowl including carriage of materials within all leads and lifts :-110 mm nominal diametre :- including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
8
235
1880
... More
Providing and fixing PVC S&S off sets as per IS: 1729 :- 76 mm off sets With 75 mm dia pipe including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4
244
976
... More
Providing and fixing PVC S&S off sets as per IS: 1729 :-With 100 mm dia pipe including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4
258
1032
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) No. 20007 of HINDWARE with seat and lid, 10 litre low level white P.V.C. flushing cistern,No. 21001 including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
7823
15646
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) No.20004 of HINDWARE with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x400 mm mm with integral type foot rests including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
6927
13854
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :Flat back wash basin of size 550x400 mm No.10001
4
1745
6980
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1
1652
1652
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
2
288
576
... More
Providing and fixing PVC. 110mm size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and and PVC pipe with approved adhesive etc. complete.including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
384
768
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm No.60002 with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
8626
17252
... More
Providing and fixing white vitreous china divison plate of IS No. 5011 for Urinal including making all connections excluding cost of fittings : Size 700x340 mm including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1
2079
2079
... More
Providing and fixing G.I. Union for wash basin or sink including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :-32mm dia
4
303
1212
... More
Providing and fixing C. P. Brass S Trap for wash basin and sink 32mm dia. including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4
312
1248
... More
Providing and fixing PTMT. Bottle Trap for wash basin or sink Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms including carriage of materials within all leads and lifts :- :-32mm dia
4
840
3360
... More
Providing and fixing C.P. brass waste for wash basin or sink including carriage of material in all leads and lifts as per direction of the Engineer in Charge.32 mm dia
4
243
972
... More
Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4
150
600
... More
Providing & fixing 110mm dia C.P. grating for floor or nahani / gully / floor trap including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
10
178
1780
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
3
1489
4467
... More
Providing and fixing 600mm X 20mm size C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts.
3
1170
3510
... More
Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete,including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1
1028
1028
... More
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts.
5
163
815
... More
Providing and fixing 15mm dia CP brass bib tap of (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
4
606
2424
... More
Providing and fixing 15mm dia CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
4
747
2988
... More
Providing and fixing 15mm dia C.P.brass angle valve of jaquar with flange (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
8
959
7672
... More
Providing and fixing 15mm dia C.P.brass stop cocks including carriage of materials within all leads and lifts :-
6
465
2790
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-15 mm nominal bore with 45cm length.
15
124
1860
... More
Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts :-15mm nominal bore :-
2
476
952
... More
Providing and fixing brass full way valve with wheel including carriage of materials within all leads and lifts :-20 mm nominal bore :-
2
687
1374
... More
Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms including carriage of materials within all leads and lifts
4
279
1116
... More
Providing and instalation Electric Pump 2HP Complete including carriage of meterials in all leads and lifts.
1
8020
8020
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including RCC cover with frame 455x610 mm internal dimensions, : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1
10394
10394
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120cm x 90cm and 90cm deep including RCC cover with frame (medium duty) 500mm internal diameter, : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1
19479
19479
... More
Providing and fixing precast reinforced cement concrete chamber cover with frame complete for man hole of internal dimension 300mm x300mm i/c carriage of materials within all leads, lifts and other incidentals.
12
443
5316
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. Rectangular shape 610x455 mm internal dimensions R.C.C. manhole cover with frame.
4
873
3492
... More
Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete including carriage of materials within all leads and lifts:- 150mm.
20
961
19220
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%