Public Works Department Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Mar 2025
Closing Soon12 Mar 2025
Tender Amount₹ 1,15,92,595
Costs
EMD
₹ 2,32,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Ground Floor Of Govt. High School Building At Sarkidhar Sub-tehsil Rewalsar Tehsil Balh Distt Mandi Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_101215_1Tender No
PW-NCD/TA-Tender/2024- 10278-88 dt. 01.03.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Ordinary Rock
388.23
269
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
26.9
1661
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (one Cement : four coarse sand) : eight graded stone aggregate 40 mm(forty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
58.96
4734
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
29.8
4466
-
... More
Providing and laying damp-proof course 40mm (Forty millimetre) thick with cement concrete 1:2:4 (one cement : two coarse sand: four graded stone aggregate 12.5mm (Twelve point five millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
32.16
282
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg (One point seven Kilogramme) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
32.16
124
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (One cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (Twenty millimetre) nominal size) over 75mm (Seventy five millimetre) thick bed of dry brick ballast 40 mm (Forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
47.41
501
-
... More
Constructing Coursed rubble hammer dressed 'U' shape open surface drain with side wall. 15 X 23 cm (Fifteen into twenty three centimeter ) in cement mortar 1:6 ( One Cement : Six approved Sand) and inside plastering with cement mortar 1:3 (One Cement: Three approved Sand) including earth work and laying 10 cm (Ten Centimatre ) cement concrete in 1:5:10 (One Cement : Five approved Sand : Ten graded crushed stone aggregate) of 40 mm (Forty millimetres) nominal size and 7.5 cm (seven Point Five Centimatre ) cement concrete 1:2:4 (One Cement : Two approved Sand : Four graded crushed stone aggregate of 20 mm (Twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
107.16
1017
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns etcetera for mass concrete within all leads, lifts and carriage of materials and other incidentals or as per direction and satisfaction of Engineer-in-Charge.
359.11
227
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :Suspended floors, roofs, landings, balconies and access platform within all leads, lifts and carriage of materials and other incidentals or as per direction and satisfaction of Engineer-in-Charge.
254.6
543
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :Columns, Pillars, Piers, Abutments, Posts and Struts within all leads, lifts and carriage of materials and other incidentals or as per direction and satisfaction of Engineer-in-Charge.
174
570
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Lintels, beams, plinth beams, girders, bressumers and cantilevers within all leads, lifts and carriage of materials and other incidentals or as per direction and satisfaction of Engineer-in-Charge.
192.39
441
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :Stairs, (excluding landings) except spiral- staircases within all leads, lifts and carriage of materials and other incidentals or as per direction and satisfaction of Engineer-in-Charge.
28.2
475
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Edges of slabs and breaks in floors and walls within all leads, lifts and carriage of materials and other incidentals or as per direction and satisfaction of Engineer-in-Charge.
32.4
135
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. within all leads, lifts and carriage of materials and other incidentals or as per direction and satisfaction of Engineer-in-Charge.
78.1
468
-
... More
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size). including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
1.35
7287
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete including cost of binding wire upto all floor level. Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
39454.4
88
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm (twenty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
4.81
6045
-
... More
Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, huttering,finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm (twenty millimetre) nominal size) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
13.36
7682
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work above plinth level up to floor all level, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
182.65
6676
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work above plinth level up to floor all level, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level up to Floor-V Level
96.38
7706
-
... More
Brick work with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 (Seven point five) in super structure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (one cement : six coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
60.56
8295
-
... More
Brick work 23 cm thick brick masonary in rat trap bond with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 (Seven point five) in super structure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
7.2
6826
-
... More
Half brick masonry with common burnt clay F.P.S. (Non modular) bricks of class designation 7.5 (Seven point five) in foundation, plinth and super structure in Cement mortar 1:4 (one cement : four coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
226.66
998
-
... More
Providing and laying Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement :six sand : twelve graded stone aggregate 20mm (twenty millimetre) nominal size) at plinth level including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
59.22
5684
-
... More
Providing and laying Coursed rubble masonry (second sort) with hard stone in foundation & plinth with cement mortar 1:6 (one cement : six coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
28.11
6216
-
... More
Providing and laying Boulder filling under floors tightly hand packed including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2.93
1410
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, having double groove for fixing double glass unit whereever required , excluding panelling and glass pans which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class Deodar wood : 40mm thick shutters including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
73.28
3062
-
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters With ISI marked stainless steel butt hinges of required size : Second class Deodar wood including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
61.92
3022
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm (twenty five into forty millimetre) thick including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
Float Glass Pans. 6.0mm (five point zero millimetre) thick glass panes (weight not less than 15kg /sqm (Fifteen kilogram/square metre)
44.51
1550
-
... More
Frosted Glass. 4mm (four millimetre) thick frosted glass panes (weight not less than 10kg /sqm)
5.55
1465
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
692.1
169
-
... More
Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
32.87
3040
-
... More
Providing and fixing fire resistant door frame of section 50 x 60 mm (Fifty into sixty millimetre) on horizontal side & 35 x 60 mm (Thirty five into sixty millimetre) on vertical sides having built in rebate made out of 1.6 mm (one point six millimetre) thick GI sheet ( Zinc coating not less than 120gm/ m2) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m3 . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm (hundred into eighty nine into three millimetre) for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
33.2
11884
-
... More
Providing and fixing 60 mm (Sixty millimetre) thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm (Sixty millimetre in to sixty millimetre) wide and bottom rail of 110 mm x 60 mm (one hundred ten millimetre into sixty millimetre) made out of 1.6mm (one point six millimetre) thick G.I. sheet (zinc coating not less than 120gm/m2) duly filled mineral wool insulation having density min 96 kg/ m3 and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm (One hundred into eighty nine into three millimetre) of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling to be paid for seperately) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
12.23
7481
-
... More
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in- charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
4.31
34542
-
... More
Providing and fixing cup board shutters with 19 mm thick commercial board, exterior grade , of approved make, including IInd class teak wood edging of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges,With non decorative veneering on both sides complete as per direction of Engineer-in- Charge.
1.44
2583
-
... More
Providing and fixing PGI sheet 0.63 mm thick on existing door shutters (bathroom and W.C. doors) flat finished including necessary screws etc complete as per direction of Engineer-in- Charge.
9.29
805
-
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm (twenty millimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
32.87
351
-
... More
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
5.04
152
-
... More
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia complete in all respect as per direction and satisfaction of Engineer-in-Charge.
11.7
327
-
... More
Providing and fixing 20mm dia chromium plated brass knob/end cap of ornamental design for curtain rod 20mm dia pipes with CP screws etc complete in all respect as per direction and satisfaction of Engineer-in-Charge.
16
117
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete in all respect as per direction and satisfaction of Engineer-in-Charge.
3
862
-
... More
Providing and fixing 40 mm (forty millimetre) special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
6
371
-
... More
Providing and fixing 125 mm (one hundred twenty five millimetre) chromium plated brass handles with necessary screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
20
197
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
300x16 mm
6
219
-
... More
250x16 mm
11
205
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
250x10 mm
6
97
-
... More
200x10 mm
22
91
-
... More
150x10 mm
156
74
-
... More
100x10 mm
204
65
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
125mm
24
54
-
... More
100mm
62
47
-
... More
75mm
100
43
-
... More
Providing and fixing anodised aluminium hooks and eyes and screws etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
172
45
-
... More
Providing and fixing aluminium Twin rubber stopper hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete in all respect as per direction and satisfaction of Engineer-in-Charge.
18
65
-
... More
Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
6
47
-
... More
Providing and fixing cup-board with 19 mm thick water proof termite resistant commercial board box including shelves and shutters, the back side cup board / cabinet shall be 8 mm thick ply and all the cut portions of shelves shall be finished with 6 mm thick hard wood edging. The cut portion of shutters from all sides shall also be finished with 12 mm thick hard wood edging. The shutter from out side shall be finished with 1 mm thick Lamination of approved shade to match with panelling, Inner side of shutter, shelves and all exposed surfaces inside shall be finished with 1mm thick white mica of approved quality including stainless steel hinges hinges and magnetic catcher with in all accessories etc. complete as per detailed drawing as per direction of Engineer-in-charge including all leads, lifts and carriage of material and other incidental.
4.41
7295
-
... More
Providing and fixing M.S. Channel door, windows Frames maufactured from M.S. Channel ISLC 75X40 in combination with using angle iron 40x40 mm and M.S. flat 45X5mm welded together as per drawing and direction of Engineer-in-charge including hinges jambs bead and if required angle threshold M.S angle 50X25 mm welded or rigidly fixed by mechanical means with spilt end tails to each jamb including steel butt hinges 25mm and provision of locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of surface as directed by Engineer-in-charge including carriage of material with all leads and lift.
83.55
1029
-
... More
Providing and fixing M.S. Channel door, windows Frames maufactured from M.S. Channel ISLC 125X40 in combination with angle iron 40x40x4mm and M.S. flat 45X 5mm welded together as per drawing and direction of Engineer-in-charge including hinges jambs bead and if required angle threshold M.S angle 50X25mmvwelded or rigidly fixed by mechanical means with spilt end tails to each jamb including steel butt hinges 25mm and provision of locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of surface as directed by Engineer-in-charge including carriage of material with all leads and lift.
280.6
1600
-
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 25x25x5 mm, joints mitred and welded by angle iron 25x25x5 mm or 25x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
5.72
97
-
... More
Providing and fixing 0.62mm thick troughed prepainted steel sheet Insulated roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating, i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
38.6
1499
-
... More
Providing and fixing 0.62mm thick Troughed prepainted steel sheet (without insulation) roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating, i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
39.06
1393
-
... More
Providing and fixing 20 cm wide Eaves board/facia with 0.62mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)
77.75
475
-
... More
Providing and fixing ridges or hips 60 cm overall with 0.62mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.
10.4
724
-
... More
Providing and fixing flushing 38cm overall with 0.62mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge
65.8
619
-
... More
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.
23.52
1593
-
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 110 mm (one hundred ten millimetre) diameter including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
44.06
372
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
-
-
-
... More
Coupler :110 mm (one hundred ten millimetre)
12
103
-
... More
Bend 87.5° 110 mm (one hundred ten millimetre) bend
14
150
-
... More
110 mm (one hundred ten millimetre) Shoe
14
144
-
... More
Providing and fixing unplasticised -PVC pipe clips of design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( one cement: 4 coarse sand) and making good the wall etc. complete. 110mm (one hundred ten millimetre) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
40
213
-
... More
Providing and laying 15 mm (Fifteen millimetre) cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
893.24
221
-
... More
Providing and laying 6 mm (Six millimetre) cement plaster of mix 1:3 (1 cement : 3 fine sand) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
326.68
169
-
... More
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
12.66
366
-
... More
Extra for lining out plaster to intimate stones or concrete walling or any other pattern complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
8.17
58
-
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point nine zero litre per ten square metre) Over an under coat of primer applied @ 0.75 ltr/ 10 sqm (Zero point seven five litre per ten square metre) of approved brand and manufacture including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
196.93
99
-
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (Zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (Zero point eight zero litre per ten square metre) of approved brand and manufacture including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
62.52
95
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
534.71
121
-
... More
Wall painting two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 (fifty) grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
415.93
89
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
362.74
44
-
... More
Finishing walls with 100% (One hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (Fifty gramme per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm (one point four three litre per ten square metre) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point nine zero litre per ten square metre) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
163.43
118
-
... More
Providing and applying white cement based putty of average thickness 1 mm (one millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
1114.16
111
-
... More
P/F 12mm thick green chalk board (non magnetic) of size 6ft X4ft with superior quality framing specially anodized aluminium profile 20X15mm with corners of specified plastic shall br provided. The board surface shall be non-porous ceramic particles on the top screen surface for smooth writing with chalk as per specification and direction of the Engineer in Charge.
1
2706
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
-
-
-
... More
15 mm (fifteen millimetre) nominal bore
19.5
324
-
... More
20 mm (twenty milimetre) nominal bore
33
411
-
... More
32 mm (Thirty Two milimetre) nominal bore
9
480
-
... More
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . 15 mm (fifteen millimetre) nominal bore
15
446
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
-
-
-
... More
15 mm (fifteen millimetre) nominal bore
12
283
-
... More
20 mm (twenty milimetre) nominal bore
50
351
-
... More
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.
Concealed work, including cutting chases and making good the wall etc.
-
-
-
... More
2025 (25 mm OD) pipe
29.65
452
-
... More
1620 (20 mm OD) pipe
18
381
-
... More
1216 (16 mm OD) pipe
14
350
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :. 25 to 40 mm nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
1
518
-
... More
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge .
1
459
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
20mm (twenty millimetre)
3
403
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with PVC cistern SLEEK FRESH DUAL FLUSH (starwhite) of Hindware with 100 mm sand cast Iron P or S trap, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan cat. No. 2071 of cera/Hindware or its equivalent size 580x440 mm with integral type foot rests including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
3
4438
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) Cat. no. 20065 of Hindware or its equivelant in white shade with seat and lid, with sleek plus low level white P.V.C. flushing cistern having dual flush system, including flush pipe, with manually controlled device, conforming to 15: 7231, with all fittings and fixtures complete, including cutting and making good the W.C pan with ISI marked white solid plastic seat and lid including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
6775
-
... More
Providing and fixing vetrous china dual purpose closet suitable for use as squatting pan or Europeantype water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers,10 ltr low level flushing cistern with fitting and brackets, 40 mm (forty millimetre) flush bend, 20 mm (twenty millimeter) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan universal cat. no 20012 with white solid plastic seat and lid with PVC sleek fresh white flushing cistern (510411) having dual flush systm and flush including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
1
13467
-
... More
Providing and fixing viterous China wash basin No. 1007 of size 45X30 Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts :- Of Superior quality as per direction of Engineer-Charge.
5
2316
-
... More
Providing and fixing viterous China wash basin CASCADE NXT C0404 Basin With Half Pedastal In White Shadeof Perryware /jaquar/ Hindware/ Cera or equivalent including cutting holes & making good the same and carriage of materials within all leads and lifts :- Of Superior quality as per direction of Engineer-Charge.
1
4467
-
... More
Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (One) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
3
260
-
... More
Providing and Fixing Soap dish recessed type stainless steel AHS-1531 N of Jaquar or equivalent all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
1
960
-
... More
Providing and Fixing Soap dish stainless steel CAN-1131 N of Jaquar or equivalent all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
3
662
-
... More
Providing and Fixing Toilet paper holder C.P. brass all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
588
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm (forty millimetre) dia including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
6
88
-
... More
Providing and fixing 45 cm (Forty five centimetre) length 15 mm (Fifteen millimetre) nominal bore uplasticised PVC connection pipe with brass unions including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
12
84
-
... More
Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
6
1017
-
... More
Providing and fixing Single Towel Rail Cat No. AQN-CHR-7711 of of JAQUAR, or equivalent of superior quality all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
2245
-
... More
P/F Glass shelf 600 mm long with C.P. Brass bracket and guard rail no. AKP-CHR-35771P of Jaquar or equivalent fixed with C.P. Brass screws etc all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
3
2088
-
... More
P/F wall mounted rail with hinges 600 x 100mm Cat No. B2210107 of jaquar or equivalent Superior quality all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
1
9747
-
... More
P/F U Shaped Wall Mounted Grab Bar 600mm Long CAT No. B2210106 jaquar or equivalent Superior quality all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
1
3270
-
... More
Providing and fixing C.P. brass long nose bib cock Cat no. OPP-15037PM Jaquar or equivalent single control of approved quality conforming to IS standards. 15 mm (fifteen millimetre) nominal bore all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
5
1877
-
... More
Providing and Fixing single lever basin mixer single control cat. No. OPP-15011 BPM of Jaquar or equivalent complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
1
4704
-
... More
Providing and Fixing Angular stop cock with wall flange of opel prime no. OPP-15053PM jaquar or equavalent all complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
14
1095
-
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
15mm (fifteen millimetre) nominal bore
3
200
-
... More
20mm (twenty millimetre) nominal bore
4
229
-
... More
Providing and placing polyethylene-Aluminium-Polyethelene PE-AL-PE Composite water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2000
9
-
... More
Providing and fixing 15 mm (fifteen millimetre) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
373
-
... More
Providing and fixing C P Brass grating circular type of approved quality and colour complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
16
86
-
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
110mm (One hundred ten millimetre) diametre
55.75
242
-
... More
150mm (One hundred fifty millimetre) diametre
45
295
-
... More
Providing and fixing PVC Cawl ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
110mm (one hundred ten millimetre) dia
1
187
-
... More
Providing and fixing 110mmX90mm (One hundred ten into ninety millimetre) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge
14
904
-
... More
Poviding and fixing 110mm (One hundred ten millimetre) diametre PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
4
193
-
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
110mm (One hundred ten millimetre) diametre
5
150
-
... More
115mm (One hundred fifteen millimetre) diametre
1
173
-
... More
Providing and fixing 110mm (One hundred ten millimetre) diametre PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
346
-
... More
Providing and fixing PVC plain single equal branch , insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
3
181
-
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
-
-
-
... More
110mm (One hundred ten millimetre) diametre
3
140
-
... More
150mm (One hundred Fifty millimetre) diametre
2
164
-
... More
Providing and fixing 110mm (One hundred ten millimetre) diametre PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
6
76
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slabwith 1:1.5:3 mix (one cement : one and half coarse sand (zone- III) : three graded stone aggregate 20 mm(Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (Light duty) 450x610 mm (four hundred fifty into six hundred ten millimetre) internal diameter, total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kg) (fifteen kilogramme) with sewer bricks conforming to IS : 4885 including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
5
10390
-
... More
Constructing soak pit 1.20x1.20x1.20 m (One point two zero into one point two zero into one point two zero metre) filled with brickbats including S.W. drain pipe 100 mm (One hundred millimetre) diameter and 1.20 m (one point two zero metre) long complete as per standard design including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
3812
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality LD-2.5 (two point five) Rectangular shape 600x450 mm (six hundred into four hundred fifty millimetre) internal dimention including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
1301
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
2
1244
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm (five millimetre to ten millimetre), in the recharge pit, over the existing layer of boulders, including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge.
33.6
1429
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%