Public Works Department Tender

32 mm (outside diameter minimum 42.0 and wall thickness minimum 4.0 mm)

40 mm (outside diameter minimum 47.9 and wall thickness minimum 4.0 mm)

50 mm (outside diameter minimum 59.7 and wall thickness minimum 4.5 mm)

65 mm (outside diameter minimum 75.3 and wall thickness minimum 4.5 mm)

80 mm (outside diameter minimum 87.9 and wall thickness minimum 5.4 mm)

100mm (outside diameter minimum 113.1 and wall thickness minimum 5.4 mm)

150mm (outside diameter minimum 169.9 and wall thickness minimum 5.4 mm)

200mm (outside diameter minimum 219.1 and wall thickness minimum 6.0 mm)

300mm (outside diameter minimum 323.9 and wall thickness minimum 6.0 mm)

Supplying, Laying, Testing and Commissioning of following sizes ISI marked heavy duty ("C" Class) MS pipes including cutting, hogiling, jointing duly welding etc. and providing all fittings such as elbows, reducers, flanges, gaskets, nuts, bolts and washers etc. including painting the pipes with two coats of coaltar and wrapping 4mm ( Pypkote IWL ) asphalt tape/tissue and laying the pipe upto a depth of one meter below ground level including excavating the trenches and then refilling the soil in layers not exceeding 20 cms. in depth, consolidating each deposited layer by ramming, watering etc. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts MAKE: TATA/JINDAL/SAIL/ZENITH BIRLA as per approved by the Engineer-In-Charge

80mm dia. (outside diameter minimum 90.0 and wall thickness minimum 5.4 mm)

150mm dia. (outside diameter minimum 169.9 and wall thickness minimum 5.4 mm)

Providing ,Installing , Testinmg and commissioning of Frist Aid hose reel with M.S. Construction spray painted in Post office red (swinging type hose reel drum) Conforming to IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty water hose thermoplastic (Teitile reinforced )type I, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling and nozzle of 6mm outlet with shutt off valve including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE/OMEX/SAFEX/ ATTACK

Supplying, installation, testing & commissioning of single headed Stainless steel ISI marked odlique pattern internal/External hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type'A')including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make:MINIMAX/ TYCO/CEASEFIRE/NEWAGE/ OMEX/SAFEX/ATTACK

Providing, fixing of 63 mm dia,15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Stainless steel male and female instantaneous type coupling(IS 903) including entire carriage with all leads and lifts Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE/OMEX/SAFEX/ ATTACK

Providing & fixing 63 mm dia Branch pipe with Stainless Steel with 20 mm nominal internal dia Size, S.S. metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe and Nozzle shall Confirm to I.S 903 including entire carriage with all leads and lifts and as appropved by the Engineer-In-Charge. Make:MINIMAX/ TYCO/CEASEFIRE/ NEWAGE/OMEX/SAFEX/ATTACK

Providing and fixing fibre glass reinforced Fire Hose Cabinet ( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hosing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make: MINIMAX/ TYCO/CEASEFIRE/NEWAGE/ OMEX/ SAFEX/ATTACK

Providing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 21kg/mm2 including necessary support complete including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make:MINIMAX/ TYCO/ CEASEFIRE/ NEWAGE/OMEX/SAFEX/ATTACK

Four way

Supplying, installation, testing and commissioning of single section collecting head with cast iron body, nose coupling (draw out connection) with female outlet complete bolts, nuts and rubber insertions complete in all respect as required including entire carriage with all leads and lifts and as approved by the Engineer-In-Charge. Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE/OMEX/SAFEX/ ATTACK

Draw out connection

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 be Kgs/sqcm minimum including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make:SANT/ZOLOTO/ LEADER/ KIRLOSKAR/KARTAR

80 mm Dia

100 mm Dia

150 mm Dia

200 mm Dia

300 mm Dia

Providing and fixing M.S Cast Iron/steel double flanged horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make: SANT/ZOLOTO/LEADER/ KIRLOSKAR/ LEADER/KARTAR

80 mm Dia

100 mm Dia

150 mm Dia

200 mm Dia

300 mm Dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange complete including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make SANT,ZOLOTO,LEADER/MINIMAX/ TYCO/ CEASEFIRE/NEWAGE /KARTAR

100 mm Dia

300 mm Dia

Supplying, Installation, Testing and Commissioning of following type of Sprinkler heads complete with fusible glass capsule of 5 mm dia suitable for horizontal / pendent type sprinkler's head of 68 degree with powder coated conforming to relevant IS ammended upto date complete including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make. Minimax/Ceasefire/SAFEX/OMEX/ATTACK

Pendent sprinkler

upright sprinkler

sidewall sprinkler

Providing fixing,testing and commissioning flexible sprinkler hose 25 mm dia chrome, 1 set rode, 3 clamp, 1 nipple 25mm dia 1500 mm lenght complete as per specification. Sprinkler to be installed using wrench for each type of sprinkler automatic sprinkler 1500 mmincluding all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts (ISI MARK) Make:-Minimax/Ceasefire/SAFEX/OMEX/ATTACK

Supplying, Installing, testing and commissioning of 100mm dia type of pressure gauge gate valve with all accessories as requried including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts MAKE ;-FEIBIG/ H.GURU/EMERALD/WAAREE

SITC Pressure switchs for Main, Jockey, and stand by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts MAKE DANFOSS/INDFOS/DELTA CONTROL

Supplying, Installation, Testing and Commissioning of Sprinkler check valve with water pressure gauge, drain valve etc as req complete in all respect confirming to IS mark with code complete as required including entire carriage with all leads and lifts and as approved by the Engineer-In-Charge Make SANT/ZOLOTO/LEADER/ MINIMAX/TYCO/ CEASEFIRE/NEWAGE /ATTACK

Supplying, Installation, Testing and Commissioning of Water flow switch 100 mm including connection, controls wiring etc as required complete in all respect confirming to IS mark with code complete including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts . (MAKE: LIFEGUARD/SYSTEM SENSOR/ PLOTTER/JOHNSON CONTROL/H-GURU

Supply, installation testing & commissioning of ANNUNCIATION INTERFACE MODULE PANEL (20 CHANNEL) and ONE MONITOR MODULE having floor indication with individual flow switch in that particulars as per relevant IS specifications with suitable sealed maintenance free battery and charger as per the specifications and requirement of Local Fire Authority. Each and every zone should have visual indication like-Isolation, Fire, open circuit, short circuit, fire alarm acknowledged, fault alarm acknowledged. The main panel should be housed in 1.6 mm CRCA sheet steel enclosure with front door having lock and key. Each and every zone should have the following switches Isolation, fire test, open circuit test, short circuit test, fire alarm acknowledge, fault alarm acknowledge etc. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts (Make : HONEYWELL/CEASEFIRE/ SAFEX/ ASES/ATTACK

Providing, fixing, testing and commissioning 25mm diameter inspecting and testing assembly with gunmetal isolation valve gunmetal sight glass by pass 25dia valve and connected to 50mm drain line including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make:SANT/ZOLOTO/LEADER/KIRLOSKAR/LEADER/KARTAR

Supplying, Installing, testing and commissioning of 25mm dia gate valve complete including all petty material, accessories required to complete the job in all respect including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make:SANT/ZOLOTO/ LEADER/ KIRLOSKAR/ KARTAR

Providing and fixing following size Cast iron /steel Foot Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 Kgs/sqcm. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make: SANT/ZOLOTO/ LEADER/KIRLOSKAR/LEADER/KARTAR

100 mm Dia

150 mm Dia

Supplying, Installation, Testing and Commissioning of electrical driven pump (meant for hydrants and sprinklers) suitable for automatic operations consisting of the following confirming to specifications attached.including entire carriage with all leads and lifts as per the best satisfaction og Engineer-In-Charge (A) Horizontal mounting, End Suction type single stage centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 2850 litres / minute of water at 70 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520)

(B)suitable HP Capacity Two pole totally enclosed fan cooled type squirrel cage A.C. induction motor coupled with flexible coupling for the above pump suitable for 3 phase, 415 V +/-10%, 50 Hz +/- 5% A.C. supply, with IP 55 protection for enclosure, horizontal mounted type with 'F' class insulation (Confirming to IS-325)

(C) Common bed plate for mounting pump and Moter fabricated of Moter fabricated of suitable of MS, channel as per manufactures recommendation.

(D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads. (Make:Make:KIRLOSKAR/ ABB/ SIEMENS

Supplying, Installation, Testing and Commissioning of diesel engine driven Pump /standby main fire pump suitable for automatic operation consisting of following, complete in all respect as required including entire carriage with all leads and lifts and as approved by the Engineer-In-Charge. (1) Horizontal mounting, multistage , 4 stroke cycle, centrifugal pump having 125 mm suction ,100mm delivery with cast iron body and bronze impeller C-40 shaft with gland packed grade, mechnical seal conforming to IS 2850 capable of discharging 2850 litres / minute of water at 70 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520/9137) (2) suitable HP, 1800/1500 RPM water cooled radiator mounted on the engine with multiple fan belts ,coolent 2 litre, diesel engine conforming to relevant BS&IS standard complete with auto starting mechanism 1 no battery 12V/24V 130 AH mounted on suitable iron stand including voltmeter to indicate the voltage of the batteries , residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications,post office red colour etc as required. (a)The engine developing 62 bhp at 1800/1500 rpm and shall also be :Turbo charger, tachometer to indicate rpm of the engine,heater for cold starting for lubricating oil.(b)Engine accessories ; fuel sevice tank with necessary pipe work,fuel filter, pump for lubricating oil and lub oil filter,necessary safty control,a standard kit of tools ( this shall be kept on hand at all times. (3) Fuel tank suitable for min 12 hrs running & its foundation, with one empty barrel suitable for 200 ltr with diesel 200 ltr diesel & 1 fuel hand pump with 5 mtr flexible hose i/c fuel piping (supply and return) with suitable wheel valve on supply line.(4) Insulation of the silencer and exhaust pipe inside the room with 50mm thick resin bonded glass wool covered with 1mm thick aluminium cladding with necessary supports. The exhaust pipe should be 10 mtr outside the pump room with necessary rainwater cap etc.(5)The foundation height should be at least 300 mm above the ground level. The length and breadth of foundation should be at least 250 mm all around the base frame with AVM pads and angle iron frame of size 35mm x 35mm x 3mm on the top edges of the foundation.(6) The following spare parts shall be supplied with the engine and kept on hand : (a) two sets of fuel filter,elements and seals, two sets of lubricating oil filters,elements and seals, two sets of belts, one complete set of engine-joints,gaskets and hoses, two injectors, one complete set of piston ring for each cylinders ,one inlet and one exhaust valve including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts (Make of Pump:Make:KIRLOSKAR/ABB/SIEMENS

Supply, Installation, Testing and Commissioning of electrical driven jockey pump qith wet Riser system (meant for hydrants) suitable for automatic operations, consisting of the following, confirming to specifications attached. (A) Squirrel cage induction motor suitable for 3 phase ,415 volts suitable hp Horizontal mounting, End Suction type centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 180 litres/minute of water at 70 metres head to give a pressure of not less than 3.5 Kg/Sq cm at top most Hydrant point. including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts (Confirming to IS-1520) (Make of Pump:KIRLOSKAR/ ABB/ SIEMENS

Supply , Installation ,Testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respect, as required including entire carriage with all leads and lifts and as approved by the Engineer-In-Charge (terrace pump) (B) Horizontal type multistage , centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520 (C) 12.5 HP squirel cage induction motor,900 lpm ,35 head, TEFC type suitable for operation on 415 volts, 3 phase , 50 hz, AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with class- F insulation, confirming to IS-325. (D) M.S fabricated common base plate, coupling guard, foundation bolts etc.as required. Make:KIRLOSKAR/ABB/SIEMENS

SITC of Cubical type panel fabricated from 2 mm thick CRCA sheet wall mounted type made 1.8 SWG IP 54 compartmentalised with hinged locable doors, dust and vermin proof,powder coated of approved shade after 7 tank treatment process,cable alley,inter connection,Incomer 1 no mccb 63 amp 4pole 15 kA with voltmeter.Ampere Meter inbuilt, Outgoing 1 no. 63 amp 15 ka 4pole 12.5 HP DOL Starter and auto/Manual switch with R/Y/B Three phase indication pump running staus indication push buttion start and stop etc. and internal wiring,earth terminal nimbering,suitable 4 wire 415Volt 50 Hz 12.5 HP Del Starter control wire FRLSH copper conductor etc including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts MAKE L&T/ABB/HAGER/LGRAND

Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, A C supply with encloser protection class IP 54 as required including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts MAKE L&T/ ABB/HAGER/LEGRAND

Incomer

I ) 400 A, 4 pole, 50 KA, MCCB with micriprossor release with Ics=Icu digital Volt meter(0-500 Volts) with selector switch digital Ammeter (0-400 Amps) with in built selector switch and CT's etc. Set of 3 phase LED indicating lamps, set of Al. bus bar for 500 Amps

OUTGOING

Mains Fire pump/sprinkler pump

I )2 set each 160 Amps, 4p MCCB, 35/36 KA Ics=100% Icu with suitable HP fully automatic star/delta starter with over load protection, current sebsing type single phase preventor complete with all accessories and internalwiring requried for automatic operation, selector switgh for/ remoute, auto /mannul oFF operation-1sets

ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set

iii)Pump on LED Induication Lamp -1 No

b) Jockey pump.

i) 2 set each 63 Amps. 4P MCCB 25 KA Ics=100% withSuitable HP fully automatic star/delta starter with over load protection .(without no volt and under voltage trip), current substiontuting type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote,auto/manual OFF operation-2 set

ii) Digtal ammetre with selector switch alongwith suitable ratio CTs-1 set

iii)Pump on LED Indication Lamp -1 No

Diesel Engine Control

Control for Diesel Engine Comprising

Auto/ Manaul selector switch and 3 attempt starting device, timers and relays as requried . Push buttions.start/ stop in manual mode. Indication Lamp for High/Low Lub. Oil pressure, High Water Temp, and Engine ON indication. Battery Charger suitable for 12/24 Volt DC with boost and tickle selector switch, 0-30 V DC volt meter, 0-20 A DC Ammeter . All standard relay and accessories for automatic operation.

d) System Controller

Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump and sprinkler pump, Diesel Pump, Pressurisation Pumps , in Sequence as per specification consisting of relay, timers, sensors,annunciation window for fault indication, including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make:-L&T/ABB/LEGRAND

Supplying and drawing 4 core 6 sq mm cable with PVC insulated FRLSH unsheathed in existing surface /recessed steel/PVC Conduit as required including all petty material, accessories required to complete the job in all respect including entire carriage with all leads and lifts including entire carriage with all leads and lifts Make :Polycab,Finolex, KEI as approved by Engineer-In-Charge.

4 CORE 1.5 SQMM

4 CORE 6 SQMM

Supplying and fixing true power make advanced earthing system having GI pipe 3 meter long 50 mm dia with terminal size 50x6 mm ,internal strip size 25x3 with 50 Kg compound including exvation of pit and refiling the same and making earthing pit cover 12 inch dia as required complete in all respect including entire carriage with all leads and lifts make :-True power/Earth plus/Ashloka as per best satisfaction of Engineer-In -Charge.

Providing and fixing 6 SWG G.I wire on surface or in recess for loop earthing as required.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size including entire carriage with all leads and lifts as approved by the Engineer-In-Charge. MAKE :-KEI/FINOLEX/HEVELLS

Armoured cable 16 sq. mm ( 4 core)

Armoured cable 70 sq. mm ( 3.5 core)

Armoured cable 150 sq. mm ( 3.5 core)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required and as approved by the Engineer-In-Charge.

225 mm width X 50 mm depth X 1.6 mm thickness

Annual Maintenance service inclusive of all minor consumable spares like gasket,nut bolts thimbles etc required and one visit a month and emergency visit during warranty period and after to check the whole system and maintain in running condition by fire authurised person. Add for comperehensive maintenace for next consecutive year excluding the equipment with free warrantee pariod of one year (For Second year)

For Third Year

For Fourth Year

For Fifth Year