Public Works Department Tender

Providing, laying and rolling of close-graded premix surfacing material of 25 mm (Twenty Five milimeter) thickness composed of 13.2 mm to 0.9 mm (Thirteen point two milimetre to zero point nine melimetre) (Type-B) or 13.2 mm @ 0.338kg/per ten sqaure Thirteen point two milimetre to zero point three hundred thirty eight kilogram per ten square ) mereraggregates using penetration grade bitumen @ i.e binder content @ 23.75kg/10sqm or 5.11% ( twenty three point seventy five kilograme per ten squre or five point eleven persante) by weight and minimun density of MSS should be 2.10 (two point ten ) gram/cc to required line grade and level to serve as wearing course on a previous prepared base including mixxing in a suitable plant , laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 including all leads, lifts and carriage of materials complete as per entire satisafaction of the Engineer in charge..

Providing and applying 2.5 mm (two point five milimetre) thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc.including carriage of material with all leads and lifts and other incidentals and as per direction of the Engineer-In-Charge.