Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date17 Dec 2024
Closing Soon23 Dec 2024
Tender Amount₹ 4,23,28,486
Costs
EMD
₹ 8,46,600Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Govt Sr Sec Schoool Building At Pujarli 4
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_96642_1Tender No
14063-14162 DAted 13-12-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
(ii) Suspended floors, roofs and the like.
1220.3
539
658718
... More
(iii) Columns, Pillars, Piers, Abutments, Post and struts.
723.84
533
386386
... More
(iv) Lintels, beams, plinth beams, girders,bressumers and cantilevers.
1053.52
494
520966
... More
(v)Stairs, (excluding landings) except spiral-staircases.
72.47
510
36989
... More
(vi) Edges of slabs and breaks in floors and walls.(a) Under 20 cm wide
143.79
141
20397
... More
(vii) Walls any thickness including attached pillasters, buttresses, plinth and string courses etc.
549.96
506
278280
... More
(viii) Small lintels of any span,moulding as in cornices,window sills, string courses, bands, copings, bed plates, anchor blocks and the like.
59.22
227
13455
... More
CONCRETE WORK: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- In C.Conc.1:4:8 (one Cement : four coarse sand : eight graded stone aggregate forty milimetre nominal size) upto all height/ lift including carriage of materials in all leads and lifts.
20.47
5939
121588
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :In 1:5:10 (one cement : five coarse sand : ten graded stone aggregate forty milimetre nominal Size) up to all height /lifts including carriage of materials in all leads and lifts.
77.62
5489
426079
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- In Cement Concrete 1:2:4 (one cement : two fine sand : four graded stone aggregate 20 mm (twenty milimetres) nominal size) including carriage of materials in all leads and lifts.
9.89
6706
66325
... More
Providing and laying in position specified grade of reinforced cement concrete M 25 design mix , excluding the cost of centering, shuttering, finishing and reinforcement :- (i) All work up to plinth level including carriage of materials in all leads and lifts.
113.25
7822
885926
... More
(ii) Reinforced cement concrete work M-25 design mix in beams, suspended floors, roofs having slope up to 15° landings, balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor levels, excluding the cost of centering,shuttering, finishing including carriage of materials in all leads and lifts.
396.13
9134
3618331
... More
(iii) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement ( M-25) design mix upto all floor levels including carriage of materials in all leads and lifts.
127.73
9082
1160044
... More
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials in all leads and lifts. .
102.12
402
41124
... More
Providing & Applying Water proofing treatment with Dr. Fixit - FASTFLEX or equivalent with two components polymer modified cementious coating consisting of cementious powder and a polymer liquid in two coats for first coat : clean and saturate surface and then applying a coat of Dr. FAST FLEX by maintenaning a coverage of 6-7 sft. per kg to achieve one mm thickness andthe same process shall ended upto 300 mm vertically. The second coat shall be applied in apposit direction after four six hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit- FASTFLEX while still tacky over the second coat. Then apply cement mortar 1:4 ( 1 cement:4 sand) admixed with 200 mL of pidiproof LW @ 200 Ml per 50 kg bag of cement over the floor with the suitable gredient towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels including carriage of materials in all leads anfd lifts.
542.06
980
531598
... More
Steel reinforcement for R.C.C. work including straightening cutting, bending, placing in position and bindig all complete including cost of binding wires etc. upto all floor levels including carriage of materials in all leads and lifts. (i) Thermo-Mechanically Treated bars of grade i.Fe-500D or more
112179.81
95
10758044
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in :- foundation and plinth in:(i) Cement mortar 1:6 ( one cement : six coarse sand) including carriage of materials in all leads and lifts.
214.45
9455
2027775
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto all floor levels including carriage of materials in all leads and lifts.(i) In Cement mortar 1:4 (one cement : four coarse sand)
425.16
1278
543525
... More
STONE WORK:- Stone soling properly hand-packed filling interstices with Kharanja stone under floor specified thickness complete as per HP.PWD specification including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
63.09
1507
95133
... More
STEEL WORK: Providing and fixing M.S Channel frames for windows and ventilators of mild steel Channel sections of size 75x40 ISLC to end frame and for centered frame channel 75x40 mm with M.S flate / plate 75x5 mm in combination and 25x25 mm ,2 mm thick square hollow pipe welded all around the frame to make rebate for fixing openable shutters welded together to make one frame complete as per approved Architectural Drawing and joints mitred and welded to the wall with hold fast three each side in cement concrete block 1:3:6 , including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
5462.09
150
820679
... More
Providing and fixing M.S Channel frames for doors of M.S Channel sections of size 75x40 ISLC,with M.S flat 40x12 mm in combination welded together to make one frame fixing shutters welded together as per approved Architectural Drawing and joints mitred and welded including dully welded M.S hold fast three on each side to be fixed in cement concrete block 1:3:6 block in wall , including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
1356.13
155
210200
... More
Providing and fixing factory made ISI marked ''Z'' section steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
3388.23
106
360846
... More
Providing & fixing fly proof wire gauze to steel windows, clerestory windows or doors with M.S. Flat 15x3 mm and nuts & bolts complete.(i) Stainless steel (grade 304) wire gauze of 0.5 mm dia 32 mm gauge wire and 1.4 mm aperture on both sides
112.94
766
86563
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (i) 4.0 mm thick glass panes
112.94
827
93509
... More
(i) 5.0 mm thick glass panes
130.65
1044
136399
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.(i) Fixed to steel windows by welding
1129.41
122
137788
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
17352.99
105
1835946
... More
Steel work i/c hollow section welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required upto all floor levels including carriage of materials in all leads and lifts by mechanical or manual means: (a)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
5737.9
110
631169
... More
Providing and fixing 50 mm x50 mm section hand rail round end at two levels as per Architectural drawing complete of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer including carriage of materials in all leads and lifts by mechanical or manual means.
60.5
135
8168
... More
Providing and fixing 50 mm dia M.S pipe hand rail slip resistent with round end at two levels at 75 and 90 cm height as per Approved Architectural drawings and design complete upto all floor levels including carriage of materials in all leads and lifts by mechanical or manual means.
6
135
810
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including carriage of materials in all leads and lifts by mechanical or manual means.
6
7716
46301
... More
Providing and fixing 2 mm thick Aluminium sheet lining in Shutters with necessary screws/ nails etc. complete upto all floor levels including carriage of materials in all leads and lifts.
15.58
1401
21835
... More
WOOD WORK:- Providing and fixing ISI marked Factory made Flush Doors shutter of Commercial board i.e non decorative Phenol bonded termite resistant & water proof core of block board construction with full frame of first class hard wood and well match of flush door shutters conforming to Alpro / Century I.S.I marked IS : 2202 (Part I)to be painted (i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including carriage of materials in all leads and lifts.
70.73
3513
248485
... More
Providing and fixing aluminum powder coated sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials in all leads and lifts. : 300x16mm
20
298
5966
... More
250x16mm
16
269
4317
... More
Providing and fixing aluminum tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10mm
36
106
3841
... More
100x10mm
384
89
34291
... More
Providing and fixing aluminum handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete(1) 125mm
42
71
2990
... More
100mm
254
63
16040
... More
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodi-zed (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
38
44
1706
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete.
38
1190
45247
... More
Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer- in-charge complete.( 255 X 19 mm)i) 100 mm
127
240
30518
... More
Providing and fixing water proof plywood kit ply (gold) or equivalent lining including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) 6 mm thick including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
30.25
699
21164
... More
Providing and fixing 19mm thick water proof commercial kit ply (gold) board or equivalent in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
124.89
1432
178899
... More
Providing and fixing 19mm thick Commercial kit ply (gold) board or equivalent water proof shutters for Cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
51.24
1491
76435
... More
Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.(i) 1st class indian teak wood.
219.3
83
18333
... More
Providing and fixing 65mm X 35mm special quality bright finished brass cup board lock with six levers including necessary screws etc. complete (Godrej make or equivalent of approved quality) including carriage of materials within all leads and lifts.
10
762
7624
... More
Providing and fixing PTMT of approved make furniture handles fixed with screws etc complete including carriage of materials within all leads and lifts.
20
74
1483
... More
Providing and fixing magnetic catcher (M-15) including carriage of materials within all leads and lifts.
35
50
1754
... More
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.
25
411
10275
... More
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) including carriage of materials in all leads and lifts.
25
24
608
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position including carriage of materials in all leads and lifts : (i) Kail wood
2
104258
208517
... More
Providing and fixing 1 mm thick lamination sheet marked no. 12823 of approved shade of and sample and quality of Kit Vista of Kit ply or its equivlent fixed with approved adhesive and nails complete including carriage of material within all leads and lifts.
33.4
797
26626
... More
Providing and laying 55cmx55 cmof uniform colour in combination with white as per approved Architectural drawing Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials up to all leads and lifts : (i) 19 mm thick.
1242.46
1577
1959732
... More
Providing and laying Polished Kota stone in skirting and dado, in linear as well as curvilinear portions of the building all complete as per the Architectural drawings with 19 mm ( ninteen milimetres) thick stone slab over 20 mm (average) thick base of cement mortar 1:4(one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge up all floor levels including carriage of materials in all leads and lifts.(i) 19 mm ( nineteen milimetrs) thick.
108.7
1723
187290
... More
Providing and laying 19 mm ( nineteen milimetres) thick rough finished Kota ( 80% polished & 20% unpolished) in Treads , with 5 cm ( five centimetres) wide flaming band near nosing and fully polished in Risers of approved shade and sample in full length of treads & risers ( in single piece) of Kota stone as per required size, and as per approved Architectural drawing over 20 mm (average) thick base of cement mortar 1:4(one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts.
44.55
1735
77296
... More
Extra for pre finished double nosing in treads of steps of granite/ Kota stone/ sand stone slab.
97.2
121
11766
... More
40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone.Red sand stone
6.05
1599
9676
... More
Providing and laying 1st quality full body non slipery Matt finish vetrified/ Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown,of Orient, Bell/ Kazaria/RAK/Somany or its equivelent make of approved shade & sample by the Engineer-in- Charge in floor laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
104.72
1263
132340
... More
Providing and laying 1st quality full body non slipery Matt finish Double Charged vetrified floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown,of Orient, Bell/ Kazaria/RAK/Somany or its equivelent make of approved shade & sample by the Engineer-in- Charge in floor laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
62.9
1452
91387
... More
Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).
10.58
3848
40713
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(i) Green marble/ Zebra black marble
47.07
2626
123639
... More
Providing and fixing 1st quality ceramic glazed tiles of size 300 mmx 600 mm conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Restile/ Nitco/Simpolo/Kazaria/ Somany/ Johnson/ Bell/ Orient/ AGL or its equivlant approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados without border over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts.
52.02
1318
68568
... More
Providing and fixing 1st quality ceramic glazed tiles of size 300x450 mm as approved by the Engineer-in- Charge conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Restile/ Nitco/Simpolo/Kazaria/ Somany/ Johnson/ Bell/ Orient/ AGL or its equivlant make and shade as approved by Engineer-in-Charge in skirting, risers of steps and dados without border over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts.
289.87
1281
371468
... More
Providing and laying 25 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machinewith strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
200.8
1890
379512
... More
Providing and laying 60 mm ( eighty milimetre) thick factory made cement concrete Combo block of M -50 grade NTC make or its equivlant made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge up all levels including carriage of materials in all leads and lifts.
60
2445
146706
... More
Providing and laying Uni stone wall Cladding work as per approved sample ,shade / size with special adhesive over 12 mm thick bed of cement mortar 1:3 (one cement : three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade up all floor levels and heights including cost of scafolding arrangements and including carriage of materials in all leads and lifts.
182.66
2100
383586
... More
Providing and fixing 0.60mm thick preprinted steel sheet (TATA Durashine) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20microns over 5microns primer coating to back coat of polyester of 5microns over 5microns primer coating including fixing with self drilling screws complete with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials up to all leads and lifts.
815.02
1398
1139398
... More
Providing and fixing Factory made ridges or hips ornamental or plain as per approved Architect Drawing, of width 60 cm overall width plain Prepainted G.S. sheet ( Tata Duroshine) fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m² white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts.
97.65
833
81391
... More
Providing and fixing of 90 cm overall width valley plain Pre-painted G.S. sheet of Tata make or its equivlent fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand). 1.00 mm thick with zinc coating not less than 275 gm/m² including carriage of materials up to all leads and lifts.
59.5
951
56632
... More
Providing and fixing pre-painted plain steel sheet (TATA MAKE or its equivlent as approved by the Engineer) fixing 30 cm wide, 30 cm deep overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers or self drilling screws etc., including making necessary connections with rain water pipes complete up all heights/ level including cost of scafolding and carriage of materials in all leads and lifts.(a) 0.60 mm thick with zinc coating sheet with top coat of regular modified polyster (RMP) organic coating of 20 microns primer of 20 micron over microns pruner+ back coat of polyster of 5 microns primer coating including carriage of materials up to all leads and lifts.
80.8
846
68397
... More
Providing and fixing of 0.60 mm thick prepainted steel sheet of Tata make or its equivlent 40 cm overall Flashing fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 ( 1 cement : 3 sand) including carriage of materials up to all leads and lifts.
247.95
411
102143
... More
Providing and fixing MS BP sheet 2.00 mm thick in eves board /fascia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( base members of steel work shall be measured and paid separately ) including carriage of materials up to all leads and lifts.
288.34
2116
610387
... More
Providing and fixing Everest Fibre Cement Board 6 mm thick Ceiling including frame Grid system ( G.I Angle and T- sections) complete in all respect at all floor levels and heights including carriage of materials in all leads and lifts.
324.77
1650
535871
... More
Providing and fixing on wall face M.S hollow pipe for rain water pipes including accesories ,bends etc. if reuired and jointing , welding etc.:-(i) 3 inch x 5 inche size rectangular.
100.8
1122
113193
... More
(ii) 3 inch x 3 inche size square.
5.6
952
5333
... More
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.including carriage of materials in all leads and lifts.: (i) 3 inch x 5 inche size rectangular.
10
218
2183
... More
(ii) 3 inch x 3 inche size square.
2
218
437
... More
FINISHING: 6 mm Plaster in Ceiling 1:3 (1 cement : 3 fine sand) upto all floor levels and heights including carriage of materials in all leads and lifts.
1422.71
199
283688
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) with 15 cm wide plaster bands as per Architectural drawing.
2856.55
330
944090
... More
15 mm cement plaster on the Fair side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand) with 15 cm wide plaster bands as per Architectural drawing.
979.43
333
326640
... More
15 mm cement plaster in pattern on the rough side on brick wall of mix :1:4 (1 cement: 4 fine sand) with plaster bands / designs as per Architectural drawing upto all floor levels and heights including carriage of materials in all leads and lifts.
187.29
363
68071
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Two coats or as directed by the Engineer-in-Charge upto all floor levels including carriage of materials in all leads and lifts.
5271.07
89
473869
... More
Finishing walls with 100% Premium acrylic emulsion Apex paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 liter/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm (Circulation area)
1166.72
152
178216
... More
Distempering with Acrylic oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer upto all floor levels and heights including carriage of materials in all leads and lifts.
2765.68
73
202448
... More
Finishing with Deluxe Multi surface SATIN enamel paint system for interiors and exteriors using Primer as per manufacturers specifications :(i) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
1388.66
108
151225
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :--Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
340.59
104
35660
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :-- Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
1525.72
108
165541
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry stone/brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth
200.8
601
120781
... More
Providing, laying and jointing glazed stoneware half round pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete over base concrete which will be paid separately) including carriage of materials in all leads and lifts by mechanical or manual means:(i) 250 mm radius.
101.8
595
60602
... More
Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.
101.8
1391
141650
... More
Providing and fixing Green Chalk board size 1200 x2400 mm ( twelve hundered into twenty four hundered milimetre) with Viterious enamelled steel sheet top surface: Top surface shall be made of steel sheet of thickness 0.3 mm to 0.4 mm and shall have viterious enamell coating of 0.095 mm minimum thickness on top and 0.03 mm minimum on the back. The top shall be free from waviness and shall show execellent eras ability. The core materials shall be 9 mm thick MDF board having bulk density of 750 kg per cum. and grade -I as per IS: 1406-2003 Edition 2.2. The backing material sheet shall be electro galvanised conforming to IS: 277-2003. Both the top and backing sheet shall be properly fixed with MDF board using suitable adhesive to avoid any moisture absorption. The board shall have all around framing of anodised extruted aluminium alloy hollow section Designation 63400 as per IS 1285-2002 or IS: 733-1983. The frame section shall be front: 20 mm, side:16 mm, wall thickness:1.2 mm which shall be fixed with specifically designed ''J'' clump & square clumps with the help of nylon sleeves and screws etc. complete including carriage of materials in all leads and lifts.
9
4310
38791
... More
Providing and fixing pipes on wall face PVC Finolex type-B spigot,socket, waste and ventilating pipes of working pressure not less than 4.5 kg/sqm of Finolex or equivelent including coller and filling the joints with approved adhesive complete including carriage of materials within all leads and lifts.:- 150mm dia
50
702
35133
... More
100mm dia
48
367
17618
... More
75mm dia
82.68
172
14254
... More
Providing and fixing G.I. Pipes medium grade complete with G.I. Fittings, including trenching and refilling etc.: (i) 25 mm dia nominal bore.
50
574
28735
... More
Providing and fixing G.I. pipes medium grade Jindal, Tata or equivelent make complete with G.I. fittings including trenching and refilling etc. .including carriage of materials within all leads and lift:- External work 15mm dia nominal bore
80
305
24424
... More
20mm dia nominal bore
50
398
19913
... More
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. (i) Concealed work, including cutting chases and making good the wall etc.1216(16mm OD) pipe
720
426
306720
... More
1620(20mm OD) pipe
360
463
166878
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials within all leads and lift. :(i) 25 to 40 mm nominal bore
1
617
618
... More
Providing and fixing Water Meter bulk Type of approved make and dully tested from approved lab. Including carriage of materials in all leads and lifts.
1
532
532
... More
Providing and fixing cromium plated brass stop cock of ISI marked of Jal or ESS or its equivlent approved quality including carriage of materials within all leads and lift: (i) 15 mm nominal bore
73
765
55889
... More
Providing and fixing gun metal gate valve with C.I. Wheel of approved quality (screwed end) including carriage of materials within all leads and lift. : 20mm nominal bore
8
560
4484
... More
15mm nominal bore
6
489
2936
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ( Superior Quality and make as approved by Engineer-in- Charge) IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of materials within all leads and lift.
6000
10
60300
... More
Providing and fixing ball valve (brass) of Jal or ESS or approved quality, High or low pressure, with plastic floats complete including carriage of materials within all leads and lift. 20mm nominal bore
3
467
1403
... More
15mm nominal bore
4
409
1640
... More
Providing and fixing white vitreous china pedestal type water closet (European type Seat No. 20007 of Hindware / CERA or its equivlent with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required .(i) W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials within all leads and lift.
3
12945
38836
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) of Hindware / CERA or its equivelent with100 mm sand cast Iron/PVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required:(i) White Vitreous china Orissa Pan No. 2071 ( 580x440 mm) in white shade of Cera / Hindware or its equivelent.
12
2410
28922
... More
Providing and fixing Vetrious China wash basin with half pedestal of Hindware /CERA or its equivlant , C.I. brackets, 15 mm C.P. brass pillar taps ISI marked IS No. 8934 of Jaquar or its equivlant, 32 mm C.P. brass waste of standard pattern, including painting of fitting sand brackets, cutting and making good the walls wherever require:(i) White Vitreous China Wash basin ( Clair) of size 550x400 mm with Pedestal of Cera or its equivlent with a pair of 15 mm C.P brass pillar taps including carriage of materials within all leads and lift.
19
9794
186086
... More
Providing and fixing Vetrious China wash basin ( under counter basins/ Table top basin) with half pedestal of Cera or Hindware or its equivlant , C.I. brackets, 15 mm C.P. brass pillar taps ISI marked IS No. 8934 of Jaquar or its equivlant, 32 mm C.P. brass waste of standard pattern, including painting of fitting sand brackets, cutting and making good the walls wherever require:(i) White Vitreous China Wash basin No .1025 ( Clair) of size 550x400 mm with Pedestal of Jaquar /Cera/ HIndware or its equivlent with a pair of 15 mm C.P brass pillar taps including carriage of materials within all leads and lift.
28
9794
274232
... More
Providing and fixing white Stain less Steel sink double bowl as per approved sample of Jal or ESS or its equivelent with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, includingpainting of fittings and brackets, cutting and making good the wall wherever required including carriage of materials within all leads and lift.(i) Kitchen sink with drain board 510x1040 mm bowl depth 225 mm
1
6612
6613
... More
Providing and fixing white vitreous china Flat Back Large No. 60002 with Auto flushing system of Hindware or CERA or its equivelent make White shade urinal with integral rim longitudinal flush pipe complete all fittings.
7
1343
9405
... More
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2'' BSP thread and shapes, weighing not less than 60 gms.
7
147
1031
... More
Providing and fixing PVC Finolex type - B single equal branch plain including carriage of materials within all leads and lift:150mm dia
5
452
2262
... More
110mm dia
20
347
6942
... More
Providing and fixing PVC Finolex type - B single un-equal branch plain including carriage of materials within all leads and lift:110mmx75mm dia
10
270
2703
... More
Providing and fixing PVC ( Finolex ) Plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts:150mm dia
7
640
4481
... More
110mm dia
20
284
5691
... More
75mm dia
10
192
1920
... More
Providing and fixing PVC ( Finolex ) Plain door bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts:110mm dia
8
355
2845
... More
75mm dia
5
220
1103
... More
Providing and fixing PVC ( Finolex ) Coller ISI marked including fixing with approved adhesive etc. complete including carriage of materials in all leads and lifts:150mm dia
15
419
6296
... More
110mm dia
14
277
3884
... More
75mm dia
10
213
2134
... More
Providing and fixing MS holder bat clamps of approved design of C.I or S.C.I pipes embeded in and including cement concrete blocks 10x10 cm of 1:2:4 mix ( 1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes etc. including carriage of materials within all leads and lifts:110mm dia
15
256
3840
... More
75mm dia
10
234
2347
... More
Providing and fixing PVC Finolex Clamps ISI marked of pproved design with steel screws and rawl plugs etc. complete and cost of cutting holes etc. including carriage of materials within all leads and lifts:110mm dia
10
81
811
... More
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts :-110mmx75mm
67
241
16204
... More
Providing and fixing PVC Cowl ISI marked of approved design . complete including carriage of materials within all leads and lifts:110mm dia
4
113
455
... More
Providing and fixing CP grating of Jal or ESS or approved quality complete including carriage of materials within all leads and lifts:110mm dia
59
135
7974
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of materials within all leads and lift..(a) Semi Rigid 40mm dia
48
185
8914
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including carriage of materials within all leads and lift. :(i) Rectangular shape 600x450 mm
19
1106
21020
... More
Providing and fixing 600x120x5 mm Acrylic shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete including carriage of materials within all leads and lift..
19
767
14581
... More
Providing and fixing C.P Toilet paper holder of Jal /ESS or superior quality including carriage of materials within all leads and lift.
15
560
8406
... More
Providing and fixing PVC Offset 45 degree including carriage of materials in all leads and lifts:110mm dia meter
5
379
1899
... More
75mm dia meter
2
237
475
... More
Providing and fixing C.P. brass of Jal or ESS or its equivlent long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. including carriage of materials within all leads and lift.
17
828
14088
... More
Providing and fixing C.P. brass (ISI marked of Jal or ESS or its equivlent angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lift.(i) 15mm nominal bore
10
814
8146
... More
Providing and fixing C.P. Brass extension nipple (size15mmx50mm) of approved make and quality as per direction of Engineer-in-charge including carriage of materials within all leads and lift..
20
79
1588
... More
Poviding and fixing C.P towel rail of Jal/ESS or its equivlant make complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.(i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms including carriage of materials within all leads and lift.
3
817
2452
... More
Providing and fixing C.P Health Faucet of Jal/ESS or its equivlant complete of superior quality including carriage of materials within all leads and lift.
3
590
1771
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of Jal/ESS or other make as approved by Engineer - in - charge including carriage of materials within all leads and lift..
16
359
5744
... More
Providing and fixing SST P Grab Bars of Jal/ESS /Hindware or any its equivlant approved make for handicapped persion including fixing complete including carriage of materials in all leads and lifts.
1
628
628
... More
Providing and fixing Liquid soap container of Jal/ESS or its equivlant make or approved brand and manufacturer superior quality as per direction of Engineer-in- Charge including carriage of materials within all leads and lift.
3
197
591
... More
Providing and fixing Stain less Steel Soap Dish of Jal/ESS or its equivlant make or approved superior quality with fitting arrangements, complete in all respect as per direction of Engineer-in- Charge including carriage of materials within all leads and lift.
19
151
2886
... More
Providing and fixing Urinal division plate of Marble well moulded on corner and round edges etc. complete for urinals including carriage of materials in all leads and lifts. (i) 600mmx330mm size
6
1613
9680
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :(i) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads and lift.
1
12232
12232
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :(ii) Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
20927
20927
... More
Cutting holes upto 30cmx30 cm in walls and making good the same including disposal of dismentalled materials in all leads at his own cost including carriage of materials within all leads and lift..
12
335
4020
... More
Cutting holes upto 15 cmx15 cm in RCC floors for passing drain pipes including disposal of dismentalled materials in all leads at his own cost.
10
312
3125
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality(i) Rectangular shape 600x450 mm internal dimensions of NTC or equivelent including carriage of materials within all leads and lift.
10
1882
18822
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design(i)100x100 mm size P type.(i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including carriage of materials within all leads and lift.
5
2732
13665
... More
Providing and fixing Water pump (2 H.P.) of Kirloskar make to Lift rain water including carriage of materials within all leads and lifts :-
1
8322
8322
... More
Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology of Jal/ESS or its equivlent make complete in all respect including carriage of materials within all leads and lift..
1
12115
12115
... More
Providing and fixing C.P. brass bib cock capstan head of (ISI marked of Jal/ESS or its equivlent approved quality conforming to IS:8931 : including carriage of materials within all leads and lift.(i) 15 mm
4
779
3119
... More
Providing and fixing G.I. Union ( Unieq) in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of materials within all leads and lift. : (i) 25 mm
5
345
1729
... More
(ii) 20 mm dia nominal bore
5
238
1192
... More
(iii)15 mm dia nominal bore.
5
204
1024
... More
Providing and fixing PVC reducer including carriage of materials in all leads and lifts:ISI marked including fixing with approved adhesive etc. complete within all leads, lifts of materials and other incidentals. (i) 150x110 mm (one hundred fifty by one hundered ten milimetre) nominal size.
3
732
2198
... More
(ii) 110x75 mm size
3
455
1366
... More
Providing and fixing PVC (finolex) Double equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete (i) 110mm (one hundred ten milimetre) nominal size including carriage of materials within all leads and lift.
2
640
1280
... More
(ii) 75 mm ( seventy five milimetre) nominal size.
2
234
470
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length.15 mm nominal bore including carriage of materials within all leads and lift.
20
138
2761
... More
Providing and fixing G.I inlet connection for wash basin or sink complete with accesesories of Jaquar or its equivlant superior quality including carriage of materials within all leads and lift.
16
137
2203
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design including carriage of materials within all leads and lift. :Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
6798
20396
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design including carriage of materials within all leads and lift..
1
2719
2719
... More
PAVING AND FLOORING: Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including carriage of materials in all leads and lifts. (i) 40 mm thick.
32.27
491
15872
... More
EARTH WORK: Cutting in earth work by mechanical means or manual means in all heights and depths in all kinds of soil, including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiesling and wedging out of rocks (where blasting is prohabited) and their intermediate classification of soil including dewatering whereever required,settling out to required lines,levels as shown on the drawing and directed by the Engineer in charge at site according to the HP.PWD specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful materials to be stacked at suitable site as per satisfication of Engineer -in- Charge along with levelling fine dressing and with all kinds of labour , mechanical tools and equipment and safety measures and incidental necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles, aggregate,sand slates shall be properlystacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per the direction of the Engineer-in-Charge and all surplus excavated earth will be disposed off at approved dumping site which will be arranged by the contractor at his own cost. Any loss to thepublic and private property during the course of execution and disposal of serviceableand unserviceable materials shall betheabsoluteresponsiblity of the contractor and shall have to be dully compensated by him in all respectsincluding all incidental charges.
139.33
348
48508
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level or R/wall , B/walls etc. :- In C.Conc.1:3:6 (one Cement : three coarse sand : six graded stone aggregate twenty milimetre nominal size) upto all height/ lift excluding form work including carriage of materials in all leads and lifts.
349.65
7622
2665102
... More
Stone filling behind retaining wall per HP.PWD specification 1990 Volume-I including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
22.5
1832
41238
... More
Providing weep holes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm (one hundred milimetre) dia PVC pipe extending through the full width of the structures with slope of 1(v):20 (H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 complete within all leads, lifts of materials and other incidentals.
131
197
25905
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%