Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 Feb 2024
Closing DateCancelled
Tender Amount₹ 8,64,64,655
Costs
EMD
₹ 17,29,300Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Judicial Courts Complex At Jaisinghpur, Distt. Kangra Hp
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_85580_1Bid Award Id
ViewTender No
14267-14306 and 15893-99Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights / depths of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation Footings, basis of columns etcetra and mass concrete including entire carriage of materials with in all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
248.64
66088
265.8
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, for all height/depth of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings, balconies and access platform, shelves and the like floor etcetera In all thickness upto all floor level including entire carriage of materials with in all leads,lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
3104.05
1807798
582.4
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights / depths of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels Sides and soffits of beams,beam haunchings, cantilevers, girders, bressumers and lintels upto any height/depth upto all floor level including entire carriage of materials with in all leads, lifts and other incidential as per drawings, technical specifications and as per the direction of Engineer-in-Charge.The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
2424.52
1265114
521.8
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights / depth of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, Pillars, Piers, Abutment, Posts and struts upto all floor level including entire carriage of materials within all leads lifts and other incidential as per drawings, technical specifications or as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
1554.24
1027818
661.3
Providing form work with steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting, propping etcetra with wooden battens and ballies, for all heights / depths of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair Cases with sloping or stepped soffits excluding landing upto all floor level including entire carriage of materials with in all leads, lifts and other incidentials as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
398.34
240159
602.9
Providing form work mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting, propping etcetra with wooden battens and ballies for all heights / depth of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls width upto all floor level including entire carriage of materials within all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
687.5
122168
177.7
Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies for all height / depth of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Weather shade, Chajjas, corbels etcetera including edges upto all floor level including entire carriage of materials within all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
176.77
132170
747.7
Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies for all height / depth of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Small lintels not exceeding 1.5 m (one point five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like upto all floor level including carriage of materials within all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
168.81
44869
265.8
Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies for all height / depth of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etcetera upto all floor level including entire carriage of materials within all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-in-Charge. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
752.19
406408
540.3
Providing and laying in position cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate) 40mm (Forty millimetres) nominal size mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
105.76
562029
5314.2
Providing and laying in position cement concrete 1:3:6 (one Cement isto Three coarse sand isto six graded stone aggregate) 40 mm (Forty millimeter) mechanically mixed and vibrated including curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
126.78
735907
5804.6
Stone Filling in plinth with approved quality hard stone under floor including watering, ramming, consolidating and dressing complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
253.76
197704
779.1
Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (One cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
55.51
364017
6557.7
Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:5 (One cement isto five coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
59.82
403174
6739.8
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the compressive strength of 25N/mm2 (Twenty five Newton per square millimetre) for reinforced cement concrete work with cement contents not less than 360 kg (Three hundred sixty kilogram) per cubic metre or as per approved design mix for work upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
163.15
1379808
8457.3
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the compressive strength of 25N/mm2 (Twenty five Newton per square millimetre) for reinforced cement concrete work with cement contents not less than 360 kg (Three hundred sixty kilogram) per cubic metre or as per approved design mix for all above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
956.02
9203986
9627.4
Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate) 40mm (Forty millimetre) nominal size & curing complete, excluding the cost of form work in foundation and plinth as per approved specification, drawing and design including entire carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, Royality, Malkhana, sale tax, toll tax, GST and any other taxes imposed by the government.
26.21
176964
6751.8
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) for reinforced cement concrete work with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre or as per approved design mix for all above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
34.34
316710
9222.8
Providing of tor Steel reinforcement Thermo-Mechanically Treated bars of Tata Tiscon/sail of grade Fe-500D or more for Reinforced cement concrete work including straightening, cutting, bending, placing in position complete including cost of binding wires complete upto all floor level as per HPPWD specifications, approved Drawing,design, as per the entire satisfaction and direction of Engieer in charge including carriage of material within all leads lifts and other incidentals. The rate is including of octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.
180607.11
18999867
105.2
Providing and laying damp proof course 100mm ( One hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four stone aggregate) 12.5mm ( twelve decimal five millimeter) nominal size and curing complete as per entire HPPWD specification, approved drawing, design and as per the entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
7.31
8186
1119.9
Providing Applying a coat of residual petroleum bitumen of grade VG-10 (viscosity grade- ten) of approved quality using 1.70 kg / sqm (one decimal seven Kilogramme per square metre) on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil complete as per HPPWD specifications, approved Drawing design and as per the entire satisfaction and the direction of Engineer-in-Charge. Including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
7.31
1130
154.6
Half brick masonry using second class common burnt clay building bricks in super structure above plinth level upto floor all level in Cement Mortar 1:4 (One Cement isto Four Sand) and curing complete as per entire satisfaction and the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental.The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
458.02
541288
1181.8
Brick work using second class common burnt clay building bricks in super-structure above plinth level upto all floor level in Cement Mortar 1:6 (one Cement isto six Sand) and curing complete as per approved drawing design specofications and as per direction and entire satisfaction of the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and other taxes imposed by the Government.
597.56
5837025
9768.1
Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) including top finished with 19 mm (ninteen millimetre) thick green marble with round nosing and curing complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
4.29
60044
13996.4
40mm (forty milimetre) thick Cavity wall using second class common burnt clay building bricks with 5.5cm (Five point five centimetre) wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner and outer wall 23 cm ( Twenty three centimetre) laid in cemnet mortar 1:3 ( one cement into three sand) and strength with hoop iron in bituminious coated cross ties including making weep hole and vent pipe complete 2 Nos. (two numbers ) 6/8 ( six / eight )width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - one hundred centimetre) length horizontal and vertical in cavity wall and curing complete ( The mesurement of wall faces only one side will be considered for payment) as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
92.66
241610
2607.5
Providing and fixing M.S. channels Frames 75 X 40 X 4 mm (seventy five into forty into four millimetre)M.S. angle iron 25 X 20 X 3 mm(twenty five into twenty into three millimetre) for doors, windows, frames manufactured from M.S. T - section 25 mm x 25 mm x 3 mm (twenty five into twenty five into three millimetre) and Z- Sections with M.S. flat 75mmx4mm (Seventy five into four millimeter) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold including thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (Two point five millimeter) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
157.08
17938
114.2
Providing and fixing Colured anodised aluminium ( anodised transparent or dyed to required shade accoeding to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for door, windows and ventilators of section No 14081 of Jindal/Hindalco with extruded built up standard tubular sections, fixed with dash fastener and required diametre and size. As per approved specification, Drawing, design and direction by the Engineer-In-Charge, with in all lead, lifts and other incidentals. The rate is including of octroi, royality, Malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
8913.62
4634191
519.9
Providing and fixing coloured aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, anodised aluminium (anodised transparent of dyed to required shade accordingly to IS 1868, minimum coating to grade AC-15) (AC fifteen) fixing with dash fasteners of required diametre and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required complete as per architectural drawings, specification, design and as per the direction of Engineer-in-Charge including carriage of material with in all leads , lifts and other incidentals. The rate is including of octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government.
8355.84
5011832
599.8
Providing and fixing stainless steel (Grade 304) (Grade Three zero four) wire gauge with 0.5 mm (zero decimal five millimetre) diametre wire and 1.4 mm(one decimal four millimetre) aperture on both sides fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm (fifteen into three millimetre) and nuts & bolts complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
295.45
282982
957.8
Providing and fixing aluminium 8 mm thick (eight millimetre) anodised grill anodised powder coated pattern to existing window/ventilatior with 80mmx80mm (eighty into eighty millimetres) panels holes with 25x8mm thick(twenty five into eight millimetres) aluminium flat in windows and ventilators including fixing with aluminium screws on bolts and nuts @ 200 mm c/c (at the rate two hundred millimetre centre to centre) complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1223.16
649742
531.2
Providing and fixing 12 mm (twelve millimetre) thick (both Side ) prelaminated water proof particle board in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 as per of Action Tesa / Century Ply / Kitlam /Kilply/ Greenply approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetra complete as per architectural drawings and directions of Engineer- In-Charge, As per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
178.23
188032
1055
Providing and fixing factory made 30 mm(thirty millimetre) thick panel PVC door shutter of RAJSHRI ( Code no 9.120 )consisting of frame made out of M.S. tubes of 19(ninteen) gauge thickness and size of 19 mm x 19 mm(ninteen into ninteen millimetre) for styles and 15x15 mm (fifteen into fifteen millimetre) for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm (Five millimeter) thick heat moulded PVC 'C' channel of size 30 mm(thirty millimetre) thickness, 70 mm (seventy millimetre) width out of which 50 mm (fifty millimetre) shall be flat and 20 mm(twenty millimetre) shall be tapered in 45(forty five) degree angle on both side forming styles and 5 mm (five millimetre) thick, 95 mm(ninety five millimetre) wide PVC sheet out of which 75mm(seventy five millimetre) shall be flat and 20 mm (twenty millimetre)shall be tapered in 45 (forty five) degree on the inner side to form top and bottom rail and 115 mm (one hundred fifteen millimetre) wide PVC sheet out of which 75 mm (seventy five millimetre) shall be flat and 20 mm (twenty milimetre) shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) (Ten millimeter (Five millimeter into Two)) thick, 20 mm (Twenty millimeter) wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm (Five millimeter) thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (Seven millimeter) (5 mm+2 mm) (Five millimeter plus Two millimeter) thick x 15 mm (Fifteen millimeter) wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm (Five millimetre) thick PVC strip of 20 mm (Twenty millimeter) width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
36.23
134290
3706.6
Providing and fixing 25 mm (twenty five millimetre) thick water proof commercial board of century ply (ISI marked) with 6 mm(six millimetre) thick hard wood edging all round and PGI sheet linning inside for FF / SDB including fixing with nickel plated piano hinges with screws etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
30.24
86918
2874.3
Providing and fixing glazing with 6 mm(six millimetre) thick of modigaurd / saint Gobain weight not less than 15.00 kg/ sqm. (fifteen kilogram per square metre) in door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminium snap beading shall be paid in basic item) as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
46.46
63246
1361.3
Providing and fixing glazing with 5mm (Five millimetre) thick glass panes of modigaurd / saint Gobain weight not less than 12.50 kg/ sqm. (Twelve point five zero kilogram per square metre) in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete. (Cost of aluminium snap beading shall be paid in basic item) as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
572.5
732055
1278.7
Providing and fixing 4 mm (four millimetre) thickness (weight not less than 10.00kg/ sqm) (ten kilogram per square metre) Frosted Glass panes of Modi Guard / Saint Gobain glazing in door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
30.4
39985
1315.3
Providing and fixing 20 mm (twenty millimetre) diametre stainless steel curtain rod having wall thickness of 1.25 mm (one decimal twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetra, wherever necessary complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
427.14
218097
510.6
Providing and fixing 300x16 mm (three hundred into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (AC Ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
92
24269
263.8
Providing and fixing 200 X 10 mm (two hundred into ten millimeter) size aluminium tower bolts anodized transparent or dyed to required shade and colour with screws etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
204
19033
93.3
Providing and fixing 150 X 10 mm (one hundred fifty into ten millimeter) size aluminium tower bolts anodized transparent or dyed to required shade and colour with screws etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1133
88600
78.2
Providing and fixing 150 mm (one hundred fifty millimeter) size aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
204
14912
73.1
Providing and fixing 125 mm (one hundred twenty five millimeter) size aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
864
57024
66
Providing and fixing 250 mm (Two hundred fifty millimetre) Aluminium hooks and eyes complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
832
72467
87.1
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg (thirty five kilogram) and door width upto 700 mm (seven hundred millimetre), with necessary accessories and screws etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
79
82223
1040.8
Providing and fixing aluminum hanging floor door stopper ISI marked anodised canodic coating not less than grde AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary srew complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
102
6670
65.4
Providing and fixing the complete box of cup board sahll be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Greenply / Century / Greenlam /Action Tesa and shelves of 19 mm (Nineteen millimetre) thick water proof comercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm (One millimetre) thick lamination ISI Marked of approved shade of Greenply / Century / Greenlam /Action Tesa including hinges, PTMT handle in wood colour of Prayag Polymers,knob megnatic catcher complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
77.65
430142
5539.5
Providing and fixing 19 mm (ninteen millimetre) thick Cheema Pink Granite ( Partially flamed )single slab with double round nosing a gang saw cut, mirror polished, premoulded and prepolished, in Treads of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (One cement isto Four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
133.2
617315
4634.5
Providing and laying 600x600 mm (six hundred into six hundred millimetre) Full Body Matt finish vitrified floor tiles of Johnson/ Nitco/Kajaria / AGL / Simpolo / Rak /Orient & Bell as per approved shade and design of the office in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point Three kilogram per square metre) including grouting the joints with white cement and matching pigments etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
659.53
1064877
1614.6
Providing and laying 600x600 mm (six hundred into six hundred millimetre)Double Charged / Ultra charged vitrified floor tiles of Johnson/ Nitco/Kajaria / AGL / Simpolo / Somany /rak/Orient & Bell as per approved shade and design of the office in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight Percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point Three kilogram per square metre) including grouting the joints with white cement and matching pigments etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1657.13
2578328
1555.9
Providing and laying mirror polished 25 mm (twenty five millimetre) thick Kota stone minimum Size 55X55cm / 55 X 27.5 cm (fifty five into fifty five/fifty five into twenty seven decimal five centimetre) of uniform colour with 7.5 cm (Seven point five centimeter) wide Jaislmer Yellow marble band of same shade that of flooring of approved shade as per detail slab flooring of 20 mm (Twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement isto Four coarse sand) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
348.25
560682
1610
Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Kajaria/ Johnson /AGL / Somany/ Orient Bell in flooring laid over 20mm (Twenty millimetre) thick cement mortar 1:4 (one cement isto four sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
188.51
258277
1370.1
Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design(Rainbow series ) of NTC / Unistone / Atlantic slab flooring on 20mm (twenty millimetre) average thick fixed on floor, Ramp in cement Mortar 1:4 (One cement isto four sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing, cutting and moulding complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
20.95
26407
1260.5
Smooth finishing of the exposed surface of reinforced cement concrete work with 6 mm (six millimetre) thick cement mortar 1:3 (One Cement isto Three fine sand) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
62.33
12746
204.5
Providing and fixing 19 mm (ninteen millimetre) thick polished Grey / Cheema pink Granite having round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for workstop and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (One cement isto Four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
47.41
235841
4974.5
Providing and laying 60mm (sixty millimetre) thick factory made cement concrete interlocking paver block of NTC / Unistone / Atlantic vibro compacted upto M50 (M-Fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five millimetre) thick average thickness of cement mortar 1:4 (One cement isto Four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1267.76
1289058
1016.8
Providing and fixing 19 mm (ninteen millimetre) thick Cheema Pink Granite as per pattern and detail gang saw cut, mirror polished, premoulded and prepolished, in skirting and similar locations of required size, approved shade, colour and texture laid over 12 mm (Twelve millimeter) thick base cement mortar 1:3 (One cement isto Three coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
71.04
338832
4769.6
Providing and fixing 19 mm (ninteen millimetre) thick Cheema Pink Granite single slab as per pattern and detail gang saw cut, mirror polished, premoulded and prepolished, in Riser of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimeter) thick base cement mortar 1:3 (One cement isto Three coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
35.83
144885
4043.7
Providing and laying full body matt finish Vitrified tiles of Restile /Johnson/ Nitco/Kajaria / AGL / Simpolo / Somany /Rak as per approved shade and design of the office 600x600 mm (Six hundred into six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve millimeter) thick bed of cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etcctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
72.12
127565
1768.8
Providing and laying Double Charge / Ultra Charge Vitrified tiles of Rak/ Johnson/ Nitco/Kajaria / AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office 600x600 mm (Six hundred into Six hundred millimetre) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etcctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
91.73
156867
1710.1
Kota stone slabs 25mm (twenty five millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
25.58
44851
1753.4
Providing and laying 300x450 mm (three hundred into four hundred fifty millimetre) Ceramic Glazed floor tiles of Kajaria / Nitco /Johnson /Swastik /Bell / Somany / Orient & Bell / AGL with one border matching contrast at top as per approved shade in Dado (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 12 mm (Twelve millimetre) thick cement mortar 1:3 (One Cement isto Three Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
577.97
758412
1312.2
Providing and laying 300 X 600 mm (three hundred into six hundred millimetre) Ceramic Glazed floor tiles of Kajaria / Nitco /Johnson /Swastik /Bell / Somany / Orient & Bell / AGL in Dado of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 12mm (Twelve millimetre) mm thick cement mortar 1:3 (One Cement isto Three Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
180.93
237416
1312.2
Providing and fixing 8 mm (eight millimetre) thick Teak ply peneling over 50 x 31 mm (fifty into thirty one millimetre) soft wood grid frame work at 600 mm c/c (six hundred millimetre) centre to centre with decorative teak wood beading over teak ply of size 25 X 12 mm (twenty five into twelve millimetre) having moulding on both side cornice / edging on top of peneling to be finished with 55 X 30 mm(fifty five into thirty millimetre) teak wood beading complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
173.61
653745
3765.6
Providing and fixing acoustical panels of 600x1200x25 mm (six hundred into twelve hundred into twenty five millimeters)of dexune acoustical / Himalyan/ Armstrong/proland/Gyptech Accastical panels fixed on walls with steel screw complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
217.89
1008917
4630.4
Providing and fixing 0.60mm (Zero point sixty millimetre) thick prepainted steel sheet (ISI marked Z-120) (Z-One hundred Twenty) of TATA Durashine/ sail / Reliance / Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1213.09
2061767
1699.6
Providing and fixing pre-painted steel sheet ridge ( Factory Made) having proper Gola shape or hips of TATA Durashine/ Sail / Reliance / Jindal 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
137.9
116553
845.2
Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail / Reliance / Jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of 20 (twenty) mocrons over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
90.9
89454
984.1
Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetra having dome shape gratting which shall be of MS flat 25 X 5/6 mm (Twenty Five into Five/Six) millimetre round bar and 6mm (six millimetre) round bars in dome including making necessary connections with rain water pipe complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
151.62
98932
652.5
Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL / Reliance / Jindal for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
213.8
385524
1803.2
Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata/sail / Reliance / Jindal with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
316.3
256329
810.4
Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure P.V.C rain water pipe of Finolex/Vectus /Relpipe (reliance) working pressure not less than 4/6 Kg/cm2 (Four/Six) (killogram per centimetre square) I.S.I Marked including fixing with approved adhesive etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
270
126954
470.2
Providing and fixing 150mm (one hundred fifty millimetre) diametre PVC plain bend on wall face PVC rain water pipes of Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
30
8025
267.5
Providing and fixing 150mm (one hundred fifty millimetre) diametre PVC plain shoe on wall face PVC rain water pipes of Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
15
3586
239.1
Providing and fixing unplasticised -PVC pipe clips of Finolex / Vectus /Relpipe (reliance) approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
180
44244
245.8
Steel work of TATA TISCON/SAIL /JINDAL welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams, joist, channels, angle, tee, flat with connecting plates or angle, cleats as in main and beams, hip and jack rafter fixing in rafter, purlin connects to common rafter in trusses complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
29432.53
3402400
115.6
Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero square meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm (Three hundred millimetre) vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st (first) coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement isto four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
346.06
162475
469.5
Providing and fixing stainless steel knock down railing of Kich High grade A ISI 316 of 38 (thirty eight) diametre handrail fixed on 10 x 50 mm (ten into fifty millimetre) Stainless steel flat baluster ( Design Code DT53-2-163) placed at 1200 mm C/C (One thousand two hundred millimetre) centre to centre along with 3 nos @ 16 mm (Three number at the rate sixteen millimetre) Mid rails connected at the side of baluster with fixtures the balustrade would be dixed on to floor with casted base plate of minimum 6 mm (Six millimetre) thickness base plate shall be conceated with suitable 3.5 316 grade cover cape railing hieght to be taken @ 85 mm (at the rate eighty five millimetre) from floor level, and complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
818.4
479909
586.4
Providing and fixing hand rail 50mm (fifty millimetre) diametre SST hollow pipe handrail slip resistant with round ends at two levels at 75 Cm (Seventy five centimetre) & 90cm (Ninety centimetre) height welded to 25 cm (twenty five centimetre) diametre SST hollow pipe which shall be welded to the baluster it should extend 30cm (Thirty centimetre)beyond the top and bottom of the ramp as per detail of approved size by welding etctera to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
240
140736
586.4
Painting steel work with Deluxe Multi Surface Paint of Asian / Nerolac of required shade, Two or more coat applied @ 0.90 ltr/ 10 sqm. (zero point nine zero liter /ten Per Square Metre) Over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eight zero letre/ ten Per Square Metre), of approved brand and manufacture complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
434.2
48456
111.6
Painting wood work with Deluxe Multi Surface Paint of Asian / Nerolac of required shade. Two or more coat applied @ 0.90 ltr. (zero point nine zero liter /ten Per Square Metre. Over an under coat of primer applied @ 0.75 ltr/10 sqm (zero point seven five letre / Per ten Square Metre). of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.
621.17
72242
116.3
Providing and applying 6mm (Six millimeter) thick cement plaster in ceiling with cement mortar 1:3 (One cement isto Three sand) for all heights complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
3017.08
616992
204.5
Providing and fixing 600x600x16mm (Six hundred into six hundred into sixteen millimetre) dune RH 99 tiles of armstrong mineral fiber tiles of gyproc with wood wool backing 50mm (fifty millimetre) thick layer and fix with power coated T-Grid work @ 600 (Six hundred) centre to centre in combination with 150x12mm (one hundred fifty into twelve millimetre) (One hundred fifty into twelve millimetre) thick RAI wood border as per pettern complete including as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
97.76
260217
2661.8
Providing and fixing 595x595x6 mm (Five hundred ninety five into five hundred ninety five into six millimetre) designer board of everest ( E-Board) ceiling with pre-painted GI channel framing @ 600 mm c/c (Six hundred millimetre centre to centre) complete including curing complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
320.8
488706
1523.4
Providing and applying 15 mm (Fifteen millimeter) thick cement plaster in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles in all girth and finished even and smooth with cement mortar 1:6 (One cement is to six sand) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
3203.37
860104
268.5
Providing and applying 15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles in all girth and finished even and smooth with cement mortar 1:6 (one cement isto six sand) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
3203.37
847932
264.7
Providing and applying 15 mm (Fifteen millimeter) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for Exterior plastering up to all floor levels including arises, internal angles, chamfers and rounded angles in all girth and finished even and smooth with cement mortar 1:4 (one cement isto four sand) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
2123.67
608219
286.4
Providing and applying 15mm (fifteen millimeter) Cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles in all girth and finished even and smooth with cement mortar 1:3 (One cement isto three sand) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
90.6
33712
372.1
Providing and applying 20mm (twenty millimeter) thick Cement plaster in pattern with cement mortar 1:4 (one cement isto four sand) upto floor all level including arrises,internal rounded angles,chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
41.4
13885
335.4
Forming groove of uniform size 15 mm (fifteen millimetre) wide and 15 mm (fifteen millimetre) deep groove in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1610
81305
50.5
Providing and Applying 1 mm (One millimetre) thick Birla/ JK white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
11547.49
1225188
106.1
Finishing walls with Apex weather proof exterior emulsion paint of Asian / Nerolac Suraksha of Nerolac paints / Berger paints / Dulux paints of approved shade having VOC less than 50 gm/litre (fifty gram per letre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives in New work (Two or more coats applied @ 1.43 litre/ 10 sqm.(one decimal four three litre/ per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (zero decimal nine zero litre/ per ten square metre) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
2123.67
316851
149.2
Painting two or more coat with acrylic washable emulsion of Asian / Dulux / Berger / Nerolac paints based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
2316.5
274736
118.6
Painting two or more with premium emulsion of Asian / Dulux / Berger / Nerolac paints based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
2420.66
320011
132.2
Painting two or more coat with acrylic washable emulsion of Asian / Dulux / Berger / Nerolac paints based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
3989.89
452453
113.4
Providing plinth protection with 40 mm ( Forty millimetre) thick interlocking paver block of NTC/Atlantic with 23 cm ( twenty three centimetre) diametre half round reinforced cement concrete pipe for drainage purpose laid over 10cm (ten centimetre) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate) 40 mm (forty millimetre) nominal size in bedding/ haunching complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
123
262617
2135.1
Providing and fixing Dias and other two side's table shall be made of 19 mm (nineteen millimetre) thick commercial board ISI no 1659 Greenply / Century ply / Kitply and Dias facing towards court shall be finished with 4 mm (Four millimetre) thick teak ply and as per approved shade including Drawars, vertical portion and cabinet work. The table TOP shall be made of 25 mm (Twenty five millimetre) thick commercial board. The table top dias, vertical partitions of table towards the public side and all other sides towards sitting shall be finished with 3 mm (Three millimetre) thick green panel max creative veneer VO-II cherry pine up laminating to be polished in teak wood natural shade. All visible portions of commercial board shall be finished with hard wood edging of 12 mm (Twelve millimetre) thick and 19 mm (Nineteen millimetre) wide.The table shall have hard wood beading/ edging and out of 50x25 mm (fifty into twenty five milimetre) on three side complete. (The measurment for the payment shall be made for exposed face only) as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
37.3
193818
5196.2
Providing and fixing witness box consist of shesham wood post on four corner out of 75x75 mm size ( seventy five into seventy five milimetre ) (decorative with bluster in between the post shall be made of shesham wood 40 mm (Forty milimeters) diametre and to be fixed with decorative and rail of shesham having size of 75x65 mm (seventy five into sixty five milimetres) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
4
45841
11460.3
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm (twenty seven decimal five centimetre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters, l 80x1.25 mm (one decimal eight zero into one decimal two five millimetre) M.S. laths with 1.25 mm (one decimal two five millimetre) thick work in single section, fixed with and top cover complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
27.6
88289
3198.9
Providing and fixing ball bearing for rolling shutter complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
8
4027
503.4
Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole cover with frame, cover weight 38kg (thirty eight kilogram) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
4
6355
1588.8
Providing and laying cement concrete 1:4:8 (One cement isto Four coarse sand isto Eight graded stone aggregate) 40 mm (Forty millimeter) nominal size all-round 100 mm (One hundred millimeter) diameter PVC pipe including bed concrete complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
136
106964
786.5
Providing and laying 110 mm (one hundred ten millimetre) ( to level or slope) PVC (D-plast) sewer pipe of working pressure not less than 4.5 kg/Sqm (Four point Five Kilogram per square metre) including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
136
65388
480.8
Providing and fixing 1.00 HP (one house power) water Lifting pump for lifting water from Rain water Harvesting Tank including necessary fittings complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1
6601
6601
Providing and fixing 15 mm (fifteen millimetre) diametre nominal bore G.I. Pipes complete with G.I. fittings including treanching and refiling etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
100
36760
367.6
Providing and fixing 2025 (25 mm OD) (Twenty Five millimetre outer diameter) pipe Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, 2004 of kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, (eighty degree) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra, with clamps at 1.00 (one) metre spacing complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
603
314343
521.3
Providing and fixing 1620 20mm (Twenty millimetres) O.D. pipe polyethelene aluminum polyethelene PE. AL. PE composite pressure pipe confirming to I.S. 15450-2004, of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply , capable to withstand temperature upto 80°c (Eighty degree celcius) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connections etcetra with clamp at 1.00 (One) metre spacing. This includes testing of joints complete for concealed work, including cutting chases and making good the wall etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
393
174295
443.5
Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20 to 40mm (Twenty to forty millimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
596
596.2
Providing and fixing 150 mm (one hundred fifty millimetre) diametre having working pressure not less than 6 kg/ CM2 (six killogramm per centimetre square) PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex/ Relpipe (Reliance ) /Vectus including fixing with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
316
148567
470.15
Providing and fixing 100 mm (one hundred millimetre) diametre high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex/ Relpipe (Reliance ) / Vectus including fixing with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
359
158588
441.75
Providing and fixing 75 mm (seventy five millimetre) diametre high pressure PVC spigot and socket, waste and ventilating pipes ISI marked of Finolex/ Relpipe (Reliance ) / Vectus including fixing with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
74
21711
293.4
Providing and fixing 150 mm (one hundred fifty millimetre) diametre PVC holder bat clamps of ISI marked of Finolex / Relpipe (Reliance ) / Vectus approved design to PVC rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetre) of 1:2:4 mix (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size and cost of cutting holes and making good the walls etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
211
50028
237.1
Providing and fixing 100 mm (one hundred millimetre) diametre PVC holder bat clamps of ISI marked of Finolex / Relpipe (Reliance ) / Vectus approved design to PVC rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetre) of 1:2:4 mix (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size and cost of cutting holes and making good the walls etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
239
54970
230
Providing and fixing 75 mm (seventy five millimetre) diametre PVC. holder bat clamps of ISI marked of Finolex / Relpipe (Reliance ) / Vectus approved design to PVC rain water pipes embedded in and including cement concrete blocks 10x10x10 cm (ten into ten into ten centimetre) of 1:2:4 mix (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size and cost of cutting holes and making good the walls etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
49
10922
222.9
Providing and fixing 150 mm (one hundred fifty millimetre) diametre P.V.C. heal rest ISI marked of Finolex / Relpipe (Reliance ) / Vectus Conforming to IS no-14735-99 including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
12
1570
130.9
Providing and fixing 100 mm (one hundred millimetre) diametre P.V.C. heal rest ISI marked of Finolex / Relpipe (Reliance ) / Vectus Conforming to IS no-14735-99 including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
12
1485
123.8
Providing and fixing 150 mm (one hundred fifty millimetre) diametre P.V.C. ISI marked of Finolex / Relpipe (Reliance ) / Vectus Collar conforming to IS No-14735-99 including fixing with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
96
17750
184.9
Providing and fixing 100 mm (one hundred millimetre) diametre P.V.C. ISI marked of Finolex / Relpipe (Reliance ) / Vectus Collar Conforming to IS No-14735-99 including fixing with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
109
17058
156.5
Providing and fixing 75 mm (seventy five millimetre) diametre P.V.C. ISI marked of Finolex / Relpipe (Reliance ) / Vectus Collar Conforming to IS No-14735-99 including fixing with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
22
2503
113.8
Providing and fixing P.V.C. ISI marked of Finolex / Relpipe (Reliance ) / Vectus cowl Conforming to IS No-14735-99 including fixing with approved adhesive complete 75mm (seventy five millimetre) diametre complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
4
370
92.5
Providing and fixing 150 mm (one hundred fifty millimetre) diametre PVC Plain Bend of / Finolex / Relpipe (Reliance ) / Vectus approved design cutting including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
105
26890
256.1
Providing and fixing 100 mm (one hundred millimetre) diametre PVC Plain Bend of / Finolex / Relpipe (Reliance ) / Vectus cutting including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
120
23904
199.2
Providing and fixing 75 mm (seventy five millimetre) diametre PVC Plain Bend ISI marked of Finolex / Relpipe (Reliance ) / Vectus approved design including filling the joints with approved adhesive complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
12
1365
113.8
Providing and fixing 150 mm (one hundred fifty millimetre) diametre PVC tees (medium class) ISI marked of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
53
20733
391.2
Providing and fixing 100 mm (one hundred millimetre) diametre PVC tees (medium class) ISI marked of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
60
20058
334.3
Providing and fixing 75 mm (seventy five millimetre) diametre PVC tees (medium class) ISI marked of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
12
3328
277.4
Providing and fixing 150 mm (one hundred fifty millimetre) diametre PVC single equal branch (medium class) of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
40
15648
391.2
Providing and fixing 100 mm (one hundred millimetre) diametre PVC single equal branch (medium class) of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
45
15043
334.3
Providing and fixing 75 mm (seventy five millimetre) diametre PVC single equal branch (medium class) of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
6
1664
277.4
Providing and fixing 150 mm (one hundred fifty millimetre) diametre PVC double equal branch (medium class) of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
26
23488
903.4
Providing and fixing 100 mm (one hundred millimetre) diametre PVC double equal branch (medium class) of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
30
24966
832.2
Providing and fixing 75 mm (seventy five millimetre) diametre PVC double equal branch (medium class) of Finolex / Relpipe (Reliance ) / Vectus approved design, including filling the joints with approved adhesive complete, as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
6
3627
604.6
Providing and fixing 110 x 90 mm (one hundred ten into ninety millimetre) nominal size/diameter P.V.C. floor trap ISI marked of Finolex / Relpipe (Reliance ) / Vectus Conforming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetra complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
35
36694
1048.4
Providing and fixing 110 x 75 mm (one hundred ten into seventy five millimetre) nominal size/diameter P.V.C. floor trap ISI marked of Finolex / Relpipe (Reliance ) / Vectus Conforming to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etc complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
30
31023
1034.1
Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (Five hundred thirty into Four hunddred ten millimeter) with integral type foot rests with 100 mm (Hundred millimetre) sand cast Iron P or S trap, 10 (ten) litre low level P.V.C. flushing cistern,of Hindware / Cera /Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
8
50540
6317.5
Providing and fixing white vitreous china pedestal type water closet (European type)Star S No 20087 (S - 10) Size 57 X 35 X 39 cm (fifty seven into thirty five into thirty nine centimetre) with seat and lid, 10 (Ten) litre low level white vitreous china flushing cistern (sleek Plus) of Hindware/ Cera/Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid each complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
14
140428
10030.6
Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm(forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
5
53785
10757
Providing and fixing white vitreous china Large flat back range of three half stall urinals no 60002 of size 39 x 37.5 x 59 cm (thirty nine into thirty seven decimal five into fifty nine centimetre) with 10(ten) litre white PVC automatic flushing cistern of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
5
130392
26078.5
Providing and fixing white vitreous Large flat back single half stall urinals no 60002 of size 39 x 37.5 x 59 cm (thirty nine into thirty seven decimal five into fifty nine centimetre) with 5(five) litre white PVC automatic flushing cistern of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
1
11941
11941.2
Providing and fixing 600 x 300 mm (six hundred into three hundred millimetre) white vitreous china Division plate of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details urinal with integral rim longitudinal flush pipe complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
10
21297
2129.7
Providing and fixing White Vitreous China Flat back wash basin Delta no 10010 size 55x 40cm (fifty five into forty centimetre) of Cera / Hindware / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with C.I brackets including single 15 mm (Fifteen millimetre) C.P. brass pillar tap 15 mm (fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
7
40217
5745.3
Providing and fixing white vitreous china pedestal of Cera / Hindware / Jaquar of star white / Snow white shade and as shown in the drawing / as per details for wash basin completely recessed at the back for the reception of pipes and fittings complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
7
12562
1794.6
Providing and fixing white Vitreous China Flat back wash basin Garnet no 10080 size 580x 430 mm (five hundred eighty into four hundred thirty millimetre) ( Under counter Basin) of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with C.I. brackets including 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
20
122304
6115.2
Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x 400 mm (five hundred fifty into four hundred millimetre) of Cera / Hindware / Jaquar with C.I. brackets including 15 mm (fifteen millimetre) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireand complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
5
36982
7396.4
Providing and fixing Stainless Steel A ISI 304 (18/8) (Eighteen/Eight) of Diamond / Unik Kitchen sink with drain board 510x1040 mm (five hundred ten into one thousand forty millimetre) bowl depth 250 mm (two hundred fifty millimetre) with C.I. brackets and stainless steel plug 40 mm,(forty millimetre) including painting of fittings and brackets, cutting and making good the walls wherever required complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
3
20436
6812
Providing and fixing 32 mm (thirty two millimetre) diametre C.P. brass chain and rubber plug of ISI marked for sink or wash basin complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
35
2793
79.8
Providing and fixing 32mm (Thirty two millimetres) diametres M.I. union for wash basin or sink complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
35
10363
296.1
Providing and fixing 32 mm (Thirty two millimetres) diametre C.P. Brass waste of Continental series of Jaquar / contessa plus series of Hindware /Ocean series of Cera / Hindon series of Jal/ vindge series of kerovite for wash basin and sink complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
35
8837
252.5
Providing and fixing 15 mm (fifteen millimetre) nominal bore/diametre CP Brass sink mixer of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
3
10819
3606.4
Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal for gully floor or Nahni trap complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
65
6129
94.3
Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
32
38419
1200.6
Providing and fixing C.P. brass towel rail 600X20 mm (six hundred into twenty millimetre) of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
32
18409
575.3
Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimetres) glass shelf Continental series of Jaquar / Contess Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etcetra, complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
32
25174
786.7
Providing and fixing C.P. brass toilet paper holder of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
19
10609
558.4
Providing and fixing 8 mm (eight millimetre) diametre C.P. / S.S. Jet of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with flexible tube upto 1(one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
19
10742
565.4
Providing and fixing 15 mm (fifteen millimetre) niminal bore C.P. brass bib cock tap of Continental series of Jaquar / Contess Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal approved quality complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
25
23940
957.6
Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass stop cock (concealed)Continental series of Jaquar / Contess Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
80
82304
1028.8
Providing and fixing 15 mm (fifteen millimetre) nominal bore,CP, push cock of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal approved quality and colour complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
10
4497
449.7
Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass pillar tab cock (concealed) of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
35
38496
1099.9
Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass angle valve of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal for basin mixer and geyser points of approved quality complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
25
23032
921.3
Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass full way valve with wheel, of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
20
11808
590.4
Providing and fixing 15mm (fifteen millimetre) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Contessa Plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
20
10670
533.5
Providing and fixing 15mm (fifteen millimetre) nominal bore PVC connection with brass union 45cm (Forty five centimetre) length of / Finolex / Relpipe (Reliance ) / Vectus complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
50
3870
77.4
Providing and fixing 32 mm (thirty two millimetre) diametre P.V.C.flexible waste pipe of Finolex / Relpipe (Reliance ) / Vectus for sink or wash basin including P.V.C. waste fittings complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
55
5131
93.3
Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 (one thousand) letre capacity of Finolex / Relpipe (Reliance ) / Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
30
324000
10800
Providing, laying and jointing 150 mm (one hundred fifty millimetre) diametre P. V.C. pipes grade (to level on slape) working pressure not less than 6 kg/ cm2 (six killogram per centimetre square) including fixing with approved adhesive ,testing of joints etctera complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
239.3
155066
648
Providing and laying cement concrete 1:5:10 (One cement isto Five coarse sand isto Ten graded stone aggregate 40 mm (Forty millimetre) all-round 150 mm (one hundred fifty millimetre) diametre P V C pipe of finolix / Relpipe (Reliance of / Vectus pipes including bed concrete / haunching complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
239.3
211971
885.8
Constructing brick masonry manhole in cement mortar 1:4 ( One cement isto Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement isto One decimal Five coarse sand (zone- III) isto Three graded stone aggregate 20 mm (Twenty millimeter) nominal size), foundation concrete 1:4:8 mix (One cement isto FOur coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimeter) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimeter) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty Eight Kilogram) (weight of cover 23 kg (Twenty Three kilogram) and weight of frame 15 kg (Fifteen kilogram) With Sewer bricks conforming to IS : 4885 complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
6
72079
12013.2
Constructing brick masonry manhole in cement mortar 1:4 ( One cement isto Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement isto One Point Five coarse sand (zone- III) isto Three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:4:8 mix (One cement isto Four coarse sand (zone- III) isto Eight graded stone aggregate 40 mm (Forty millimeter) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (Five hunddred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (One hundred sixteen kilogram) (weight of cover 58 kg (Fifty eight kilogram) and weight of frame 58 kg (Fifty eight Kilogram) : With Sewer bricks conforming to IS : 4885 complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
6
161238
26873.1
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (One cement isto Four coarse sand) C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into Six hundred Ten millimeters) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty Eight kilogram) (weight of cover 23 kg (Twenty Three Kilogram) and weight of frame 15 kg (Fifteen kilogram), R.C.C. top slab with 1:1.5:3 mix (One cement isto One point FIve Fine sand isto Three graded stone aggregate 20 mm (Twenty millimeter) nominal size, foundation concrete 1:5:10 (One cement isto Fove fine sand isto Ten graded stone aggregate 40 mm (Forty millimetre) nominal size, inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (One cement isto Three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred Ten millimetre) and 45 cm (Forty five centimetre) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
56
363339
6488.2
Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete as per approved specifications, drawings, design and as per entire satisfaction and direction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST any other taxes imposed by the Government.
10
6686
668.6
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements