Public Works Department Tender

Construction of granular sub-base by providing well graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site upto all leads and lifts and spreading in uniform layers with motor grader on prepared surface and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401 for Grading-I materials as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) ( fifty three millimetres to zero point zero seven five millimetres ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne ( eight to ten tonne) capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying evenly a priming coat with bitumen emulsion SS-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilograme per square metre) using mechanical means as per MORD technical specification clasue 502 including carriage of material within all leads and lifts as per direction of the Engineer-in-Charge. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying evenly a tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared granular surface treated with primer and cleaned with hydraulic broom as per technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

2 cm ( two centimetre) thick premix carpet surfacing with With paving Asphalt grade VG - 30 (Viscosity Grade Thirty) with no solvent and with 1.8 cum and 0.90 cum (one point eight cubic metre and zero point nine zero cubic metre) of stone chippings of 13.2 mm size and 11.2 mm size (thirteen point two millimetre size and eleven point two millimetre size) respectively per 100 sqm (one hundred square metre) and 52 kg and 56 kg (fifty two kilogramme and fifty six kilogramme) of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm (thirteen point two millimetre size and eleven point two millimetre size) size respectively, with hotstraight run bitumen, including consolidation with road roller of 6 to 9 tonne (six to nine tonne ) capacity etcetera complete (tack coat to be paid for separately).as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm ( two point three six millimetre) and retained on 180 micron sieve (one hundred eighty micron sieve) with bitumen using 128 kg ( one hundred twenty eight kilogramme ) of bitumen of grade VG - 30 (VISCOSITY GRADE thirty) bitumen per cum of fine aggregate and 0.60 cum (zero point six zero cubic metre) of fine aggregate per 100 sqm (one hundred square metre) of road surface, including rolling and finishing with road roller all complete.including entire carriage of materials within all leads and lifts as per the direction of Engineer-in-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement : three coarse sand : six graded stone aggregate) 20 mm (Twenty millimetre) nominal size in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera including the cost of centering, shuttering and finishing as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position mechanical mixed and vibrated cement concrete of 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate for all works upto plinth level including the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in open foundation/sub structure for all type of structure complete of plain cement concrete nominal M-15 mix 1:2.5:5 (One cement : two and half sand : five stone aggregate 20mm (Twenty millimetres) nominal size) on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax GST or other taxes imposes by the government.

Providing and laying 900mm (Nine hundred millimetre diametre) ( to level and slopes) reinforced cement concrete non pressure pipe I.S.I class NP-3 (Medium duty) for culverts on 1st class bedding of granular material in single row including collar with cement mortar 1:2 (One cement : two coarse sand) but excluding the cost of excavation protection work, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specification clause 1108 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate in retaining wall, breast wall, walls of any thickness and like structures including the cost of centering and shuttering including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall, retaining wall with 110 mm (One hundred ten millimetre) dia PVC pipe of Supreme/Finolex/Vectus extending through the full with of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Back filling behind abutment , wing walls and return walls complete as per drawings & MORD technical specification Clause 1204.3.8 granular material as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and erecting “W” metal beams crash barrier comprising fo 3mm (three millimeter) thick corrugated sheet metal beam rail, 70cm (seventy centimeters) above road/ground level, fixed on ISMC series channel vertical post 150x75x5mm (One hundred fifty into seventy five into five millimeter) spaced 2.00 mtr (two metre) center to center 1.8 mtr. Height (One point eight metre) 1.1 mtr. (one point one metre) below ground/ road level, all steel parts and fitments to be galvanized by hot dip process, all fittings to conform to IS:1367 (one thousand three hundred sixty seven) and IS 1364 (one thousand three hundred sixty four) metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm (One hundred fifty into seventy five into five millimeter), 330mm (three hundred thirty millimeter) long complete as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of boulder apron laid in wire crates with 4mm (Four millimetre) dia G.I.wire conforming to IS:280 and IS:4826 in 100mmx100mm (One hundred into one hundred millimetre) mesh (woven diagonally) including 10% (Ten percent) extra for laps and joints laid with stone boulders weighting not less than 25kg (Twenty five kilogramme) each as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax GST or other taxes imposed by the Government.

Carriage of material/muck for proper dumping at the proposed site as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera 5th Kilometre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera Ordinary Kilometre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera 200 (Two hundred) metre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 900 mm x 600mm (Nine hundred into six hundred millimetre) equilateral & triangle as per IRC:67 made of 1.5 mm (One point five millimetre) thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm (Sixty five millimetre) width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 (Forty seven into forty seven into twelve) SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-Fifteen) grade cement concrete 450x450x600 mm, 600 mm (Four hundred fifty into four hundred fifty into six hundred millimetre) six hundred millimetre below ground level as per approved drawing Clause 1701.2.2 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and erecting direction and place identification signs with size 900x600mm (Nine hundred into six hundred millimetre) semi-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fix over aluminum sheeting 2mm (Two millimetre) thick with are not exceeding 0.9sqm (Zero point nine square metre) supported on a mild steel 2 Nos. (Two numbers) single angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre) six hundred millimetre below ground level as per approved drawing and technical specification clause 1701 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and erecting direction and place identification signs with size 1200x900mm (Twelve hundred into nine hundred millimetre) semi-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fix over aluminum sheeting 2mm (Two millimetre) thick with are not exceeding 0.9sqm (Zero point nine square metre) supported on a mild steel 2 Nos. (Two numbers) single angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600mmx 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre) six hundred millimetre below ground level as per approved drawing and technical specification clause 1701 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing of typical NABARD Informatory sign board 900x900mm (Nine hundred into nine hundred millimetre) with logo as per MORD specifications and drawing. Three mild steel plates of 1.6mm (One point six millimetre) thick, top and middle plate duly welded with mild steel flat iron 25mmx5m (Twenty five millimetre into five metre) size of back on edges. The lower plate will be welded with mild steel angle iron frame of 25mmx25mmx5mm (Twenty five millimetre into twenty five millimetre into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos (Two Number) 75mmx75mm (Seventy five millimetre into seventy five millimetre) of 12 (Twelve) SWG sheet tubes posts duly embedded in cement concrete M-15 (M-Fifteen) grade blocks of 450mmx450mmx600mm, 600mm (Four hundred fifty millimetre into four hundred fifty millimetre into six hundred millimetre) six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mmx47mm (Forty seven millimetre into forty seven millimetre) of 12 (Twelve) SWG steel plate tube. All mild steel will be stove enamelded on both sides. Lettering and printing arrows, border etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but including painting as per drawing and Technical Specification Clause 1704 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying 2.5 mm (Two point five millimetre) thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads @ 250gms per sqm (two hundred fifty grams per square metres) area thickness of 2.50mm ( two point five zero millimetres) is exclusive of surface applied glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.