Public Works Department Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Feb 2025
Closing Date20 Feb 2025
Tender Amount₹ 9,01,05,247
Costs
EMD
₹ 18,02,100Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Government Senior Secondary Boys School At Nadaun, Distt. Hamirpur, H.p.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_99860_1Bid Award Id
ViewTender No
Construction of Government Senior Secondary Boys School at Nadaun, Distt. Hamirpur, H.P.Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying cement concrete 1:4:8 (One cement isto four isto eight) graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
114.59
4615
528935.98
... More
Providing and laying cement concrete 1:3:6 (One cement isto Three isto Six) graded stone aggregate 40mm (Forty millimetre) nominal size and curing complete excluding cost of form work in foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
27.05
4997
135185.08
... More
Providing and laying plain cement concrete 1:2:4 (One cement isto Two sand isto Four graded broken/crushed stone aggregate 20mm (Twenty millimetre) nominal size mechanically mixed vibrated and curing complete excluding cost of forms work in foundation and plinth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2.84
5732
16281.15
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetre) with cement contents not not less than @ 320 Per Kilogram/Cubic metres (at the rate The hundred sixty Per Kilogram Per Per Cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
11.66
7306
85196.12
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five niewton per square millimetre) with cement contents not not less than @ 360 Per Kilogram/Cubic metres (at the rate The hundred sixty Per Kilogram Per Per Cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
327.16
7607
2488967.85
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five ) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) for reinforced cement concrete work @360 Per Kilogram/Cubic metres (at the rate The hundred sixty Per Kilogram Per Per Cubic metre) or as per approved design mix All works above plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1108.63
7800
8647314
... More
Providing Plinth protection with 50 mm (fifty millimetres) thick interlocking paver blocks of NTC with 23cm (Twenty three centimetres) diametre Half round reinforced cement concrete pipe for drainage purpose fixed over 10cm (Ten centimetres) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
170.25
1866
317686.5
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto any height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Foundation Footings, basis of columns etcetera and mass concrete including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
553.28
297
164545.47
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings,balconies and access platform, shelves and the like floor etcetera upto all floor level including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
3107.05
535
1664757.39
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters buttresses, plinth and string courses and the like upto all floor level .including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
252.44
391
98754.53
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits including landing upto all floor level including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
433.16
502
217706.22
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Columns, pillars, posts and struts-Square, rectangular or polygonal/Circular or curved in plan upto all floor level including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
1447.2
564
816654.96
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels all heights upto all floor level including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
2198.27
520
1143759.88
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all floor level including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
922.4
147
135592.8
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work in Cornices & mouldings, window sills, string courses, bands, copings, bed plates, anchor blocks and the like upto all floor level including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
41.31
762
31490.61
... More
Providing form work with steel plates 3.15mm (three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all below supporting floor to ceiling upto all height and removal of the same for cast in situ-reinforced concrete and plain concrete work inChullah hoods, weather shades, chhajjas, corbels etc. including edges and the like upto all floor level including entire carriage of materials upto all leads, lifts and other incidential as per drawings and technical specifications and as per the direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, toll tax, GST or other taxes imposed by the Government
118
566
66882.4
... More
Providing and erection in position tor steel reinforcement of Tata / Sail for Reinforced Cement Concrete work including straightening, cutting, bending, placing in position and binding all complete for all works at all level Thermo-Mechanically Treated bars of grade Fe-500D or more etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
234260.35
96
22699827.92
... More
Providing, fabrication and erection in position structural steel work of Tata / Sail / Reliance/Jindal Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required. including carriage of material upto all leads and lifts and as per direction of Engineer In Charge. In stringers, treads, landings etcetra of stair cases, including use of chequered plate wherever required, all complete and in gratings framed guard bars, ladders, railling,brackets and similar works as per approved make all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15658
133
2091908.8
... More
Providing, fabrication and erection in position structural steel work of Tata / Sail / Reliance/Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15635.2
115
1807429.12
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etcetra , including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetra, stainless steel 304 grade of 50mm (fifty millimetre) diametre handrail fixed on 35mm (thirty five millimetre) diametre stainless steel baluster in combination with 15/20mm (fifteen oblic twenty) SST pipe baluster connected at the side of baluster with fixtures. the baluster would be fixed on to floor with casted base plate of minimum 6mm. thickness.base plate shall be concealed with suitable S.S. 304 grade cover cape complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
960
598
574272
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etcetra , including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetra ,50mm (fifty millimetre) diametre sst pipe handrail slip resistant with round ends at two levels at 75 and 90 cm (seventy five to ninety centimetre) height,it should extend 30cm (thirty centimetre) beyond the top and bottom of the ramp with baluster 25mm (twenty five millimetre) diametre stainless steel pipe balusters welded to 50mm (fifty millimetre) diametre stainless steel pipe embedded in cement concrete 600mm (six hundered millimetre) centre to centre complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
400
598
239280
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel channel sections of size 75x40x4 mm (seventy five into forty into four millimetre) and MS angle 25x20x3mm (twenty five into twenty into three millimetre), joints mitred and welded by MS flat iron 40x12mm (forty into twelve millimetre) to the existing T- iron frame size 25x25x3mm (twenty five into twenty five into three millimetre), and Z-sections as per detail to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
80
121
9752
... More
Providing and fixing second class teak wood for wood work in frames of doors and other frames,wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia & length complete as per architectural drawings specifications design in door frame, windows frames and vetilators frames as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
0.11
125054
13756.02
... More
Providing and Fixing factory made door frame fabricated from sections roll formed out of 1.2mm thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sq.mtr. The overall size of the section should be 105x60mm with rebate of 37mm for shutter. The frame section should be cut to length and metre joined with corner brackets made of CRCA electroplated. The frame should be provided with (a) 3 Nos. of M.S. powder coated 4” Butt hinges of 2mm thickness welded to the frame. (b) 6 Nos. of 1.2mm thick CRCA electroplated stiffeners should be welded to frame. (c) 6 Nos. of 8” M.S. hold fasts with split end tail welded to stiffener plates. (d) One no. aldrop receiver.(e) Per Number frame should be provided with 25x50mm tie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with a coat of etched primer., all complete as per manufacturer's specification and direction of Engineer-In-Charge.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
357.8
872
312216.28
... More
Providing and fixing double rebate door frame fabricated from sections roll formed out of 1.2mm thick galvanized steel (Base steel as per IS 513) with zinc of 120 gms/sq.mtr. The overall size of the section should be 125x60mm. The frame section should be cut to length and meter joined with corner brackets made of CRCA electroplated. The frame should be provided with. (a) 3 Nos. of M.S. powder coated 4” Butt hinges of 2mm thickness welded to the main frame. (b) 6Nos. of 1.2mm thick CRCAelectroplated stiffeners should be welded to frame. (c) 6 Nos. of 8” M.S. hold fasts with split end tail welded to stiffener plates (d) One no. aldrop receiver. (e) Per Number frame should be provided with 25x50mm tie rod at bottom. All welded places should be treated with protective coat of zinc rich primer. The entire frame should be provided with acoat of etch primer after preteatment of the surface as directed by Engineer-in- Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
109.2
1050
114692.76
... More
Providing and fixing anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081 of Jindal / Hindalco etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
844.33
494
417183.45
... More
Providing and fixing coloured coated/ anodised aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1189.38
561
667717.93
... More
Providing and fixing ECO 5000 Series or ELIXIR 3000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513“D”quality,Galvanized as per IS 277 with Zinc of 120 grams/Sq.Mtr.) with total coated thickness of 0.60mm.with Coated Sectionss hould be with Primer Coat of Epoxy Primer of 5-7microns thick, finish painted with Polyester Paint of 12-16micron thick and back coated with Alkyd backer of 5-7microns,or Powder Coated with pure Polyester Powder upto 50-60 microns thick. Section for Frame should be of 98mmX50mm,Section for Mullion should be of46mmX70mm,Section for Shutter Frame s should be of 46mmX46mm, Section for Fixed Glass Bead should be of 18mmX25mm and Section for Flymesh Shutter Frame should be of 20mmX40mm, Frame and Mesh Shutter Sectionsshould be cut to length and mitre joined with Corner Bracket made of Polypropylene.Glass Shutter should be mitre joined with corner brackets made of CRCA electroplated.Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap EthylPropylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter between Frame and Glazed Shutter and both sides of Fixed Glass.Frame should be fixed to brick/concrete masonary by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frames including MS Powder Coated Friction Hinges,S.S.Pivot Hinges, High Grade Aluminum Powder Coated Handle including carriage of material upto all leads and lift as per direction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
637.68
7374
4702252.32
... More
Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type , core of black board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters including SS butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
84.42
3705
312801.43
... More
Providing and fixing 35mm (Thirty millimetre) thick both side commercial phenol bonded ISI Marked flush door shutter of CENTURY/ALPRO/ DURO PLY / GREEN PLY No.1S-2202 decorative type , core of black board construction to be finished with mica lamination of approved shade with frame of 1st (first) class hard wood and well matched ply veneering with vertical grain or cross bands and face veneering on both faces of shutters with providing vision panel not exceeding 0.10 (Zero point One Zero) sqm including SS butt hinges with necessary screws etcetera complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
61.2
4207
257474.52
... More
Providing and fixing 40mm (Forty millimetre) thick second Class teak wood panelled or panelled and glazed shutters for doors windows and clerestory windows having top rail 100x40mm (One hundered into forty millimetre), style 100x40mm (One hundered into forty millimetre), middle rail 150 x 40mm (One hundered fifty into forty millimetre) and bottom rail shall be 200 x 40mm (Two hundered into forty millimetre) with 12mm (Twelve millimetre) thick commercial ply panel and 5mm (Five millimetre) thick glass including brass butt hinges with necessary screws and 12x17.5mm (Twelve into seventeen point five millimetre) (cost of 5mm thick glass and 12mm thick prelaminated particle board/commercial plywood shall be paid seperately in basic item) wooden beading, and lipping/ outer moulding 50x12.5mm (Fifty into twelve point five millimetre), complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
2.1
3790
7959.63
... More
Providing and fixing 40mm (forty millimetres) thick second class teak wood wire gauge shutters for door, windows and ventilators using fly proof stainless steel grade 304 wire gauge with 0.5mm (zero decimal five millimetre) diametre wire and 1.4mm (one decimal four millimetre) wide aperture with for wooden door, window, ventilator shutters and partitions etcetra with 19x12 mm (nineteen into twelve millimetre) second class teak wooden beading complete as per the architectural drawings including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
44.1
3526
155518.65
... More
Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 Per Kilogram), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
4.8
7704
36979.2
... More
Providing and fixing 25mm (Twenty five millimetre) thick one side prelaminated water proof commercial board of Century Ply / kit ply exterior//interior grade ISI marked No. 12823 for SDB shutters with 6mm (Six millimetre) thick hard wood edging all round and PGI sheet lining inside of the shutters of approved shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
13.5
2953
39874.95
... More
Providing and fixing 6mm (Six millimetre) thickness (weight not less than 15.00 kg/ sqm) (Fifteen point zero zero Per Kilogram per sqaure metre) Glass panes of Modi Guard/Saint Gobain/AIS/Atul/Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
3.4
1785
6070.02
... More
Providing and fixing 5mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm) (Twelve point five zero Per Kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
122.88
1257
154546.18
... More
Providing and fixing 6 (Six Millimetre)mm thick toughened KT series double inside and outside clear toughend glass hermetically sealed glazing in steel/ uPVC/aluminium windows, ventilators and partition etcetera with glass both side, having 12 (Twelve Millimetre)mm (argon gas filled) air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
491.52
3373
1658290.18
... More
Providing and fixing froasted glass panes 5mm (Five millimetre) thickness (weight not less than 12.50 Per Kilogram/ Per Square metre) (Twelve point five zero Per Kilogram per sqaure metre) Glass panes of Modi Guard / Saint Gobain / AIS / Atul / Gold Plus in door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
23.28
1348
31383.77
... More
Providing and fixing 12mm (Twelve milimetres) thick (both Side) prelaminated water proof particle board in matt finish flat pressed three layer or graded wood particle board conforming to IS: 12823 as per of Action Tesa / Century / Greenlam / Merinolam / Kitlam / Vista approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete as per architectural drawings and directions of Engineer-in-Charge including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
103.79
1300
134927
... More
Providing and fixing Fly proof stainless steel wire gauge to doors, windows and clerestory windows with M.S. flat 15x3mm (Fifteen into three millimetre) and nut and bolts complete stainless steel (Grade-304) wire gauge of 0.5mm (Zero point five millimetre) dia wire and 1.4mm (One point four millimetre) wide aperture with matching wood beading on both side complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
307.2
1055
324311.04
... More
Providing and fixing M.S. (Mild steel) grills of require pattern in wooden/steel frames of windows etcetra with 20x6 (Twenty into six millimetre)mm Mild Steel Flats in combination with 8x8 (Eight into Eight millimetre)mm square bars with round headed bolts and nuts or by screws complete all as per Drawing and Techanical Specifications including entire carriage of materials within all leads, lifts and other incidentals, as per approved and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2614.49
141
369950.34
... More
Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet (ISI marked-Z-120) of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametre with prepainted limpet and rubber washers complete complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
613.99
1686
1035616.93
... More
Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6 mm (Six millimetres) diametre and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
63.3
746
47228.13
... More
Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
52.4
852
44665.76
... More
Providing and fixing flushing 38cm (Thirty eight centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter and prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
485.8
858
417107.88
... More
Providing and fixing minimum 30cm (Thirty centimeters) wide 25cm (Twenty five centimeters) deep of 0.63mm (Zero decimal six three milimetres) thick plain G.I. sheet gutter of TATA/ Sail/Reliance/Jindal with iron brackets 40x3mm (Forty into Three milimetre) size dome shape grating shall be provided which shall be M.S. plate 25x5/ 6mm (Twenty five into five/six millimetre) square round shape with 6mm (Six millimetres) diametre bars in dome including bolts and nuts and washers and including making necessary connections with rain water pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
269.6
925
249541.76
... More
Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetre) thick in eaves board/facia/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separately) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
224.11
1794
402120.57
... More
Providing and fixing mild steel. brackets made of vertical post 100x50mm (hundered into fifty millimetre), main frame of 50x50x3.0mm, distribution member shall be 25x25mm of, hollow pipe of specified shape, projecting 450mm (four hundered fifty millimetre) outside the wall surface and 450mm (four hundered fifty millimetre) length fixed on wall with 4 (four) numbers, 6mm (six millimetre) diametre expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etcetra The side M.S flat for brackets & centre piece shall be welded and fixed with M.S. nuts, bolts, & washers of size 25x3mm (twenty five into three millimetre), one bolts on Per Number side on the both sides of 50x50mm (ifty into fifty millimetre) hollow pipe, total length is 900mm (nine hhundered millimetre) and angular length is 425mm (four hundered twenty five millimetre) including fixing complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
160
122
19632
... More
Providing and fixing decorative screen in coridor manufactured from 19mm x 19mm (nineteen into nineteen millimetre) hollow square pipes welded with mil steel hollow sections of size 50mm x 50mm (fifty into fifty millimetre), supported on 10 cm (ten centimetre) diametre mild steel hollow pipes. A centre piece shall be of 25 x 3mm (twenty five three millimetre) mild steel flat frame covered with M.S. black sheet made to shape and applying a priming coat of approved steel primer using structural steel complete as per architectural drawings including carriage of material, within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
30.4
2121
64484.48
... More
Providing and fixing 6mm (six millimetre) ACP (aluminium Composite panel) ceiling with pre-painted hot dipped galvanized steel sections (galvanized @ 120 grams/Per Square metre (one hundered twenty grams per Per Square metre) channel framing @ 600mm (Six hundred millimetre) Centre to Centre complete including curing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
333.21
1612
537434.41
... More
Providing and fixing in position factory made Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 (Twelve Hundred into Twenty Four Hundered into Twelve point Five millimetre) mm having approxiamately 15% (Fifteen percent) perforated area with perforation size and pattern as approved by the Engineer-in- Charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 (Zero Point Sixty) complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
629.22
1461
919542.11
... More
Providing and fixing 15mm (Fifteen millimetre) thick mineral fibre false ceiling tiles at all heights of size 600x600mm (Six hundered into Six hundered millimetre) of approved texture, design and pattern with wood wool backing and Rai wood border The tiles should have Humidity Resistance (RH) of 99% (Ninety nine percent), Light Reflectance 85% (Eighty five percent), Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm (Zero point Three Three millimetre) thick (galvanized @120 gsm) (at the rate One hundered twenty) comprising of main T-runners of 15x32mm (Fifteen into thrity two millimetre) of length 3000 mm, (Three thousand millimetre) cross-T of size 15x32mm (Fifteen into thrity two millimetre) of length 1200 mm (One thousand two millimetre) and secondary intermediate cross T of size 15x32 mm (Fifteen into thrity two millimetre) of length 600 mm to form grid module of size 600x600 mm (Six hundered into Six hundered millimetre) suspended from ceiling using galvanized mild steel item (galvanised@ 80gsm) (At the rate Eighty) 50mm (Fifty millimetre) long 8 mm (Eight millimetre) outer diameter M-6 (M-Six) dash fasteners, 6 mm (Six millimetre) diameter fully threaded hanger rod up to 1000 mm (One thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm, (Eighty five onto twenty five into Two millimetre) spaced at 1200 mm One thousand two hundered millimetre centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24x3000 mm (Twenty four into Twenty four into Three Thousand millimetre) made of 0.40 mm (Zero point four zero millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm (Four hundered fifty millimetre) centre to centre and 40 mm (Forty millimetre) long dry wall stainless steel screws complete. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights.complete including curing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
102.08
2542
259487.36
... More
Providing and construction of second class brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:6 (One cement isto Six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
564.46
7621
4301806.11
... More
Providing and construction of half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point Five) in super structure in Cement mortar 1:4 (One cement isto Four coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
367.58
1067
392207.86
... More
Providing and construction of random rubble masonry with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement isto Six coarse sand isto Twelve graded stone aggregate 20mm (Twenty millimetre) nominal size upto plinth level including raking out joints in cement mortar 1:6 (One cement : Six coarse sand) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
62.45
5647
352698.87
... More
Providing 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for exterior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto Five sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2761.96
264
729157.44
... More
Providing and plastering 15mm (fifteen millimetre) cement plaster in cement mortar 1:5 (one cement isto 5 sand) in two coats backing coat 10mm and finishing coat 5mm thick on rough side of brick masonry/stone masonry/concrete walls for exterior plastering including making groove or drip course, arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:5 (One cement isto Five sand) above plinth level to floor all levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2761.96
292
808978.08
... More
Providing 6mm (Six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) upto all floor levels complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2878.11
219
632032.96
... More
Providing and plastering 15mm (fifteen millimetre) cement plaster in cement mortar 1:5 (one cement : 5 sand) for exterior walls upto all floor level including arrises,external rounded angles, chamfers and/or rounded angles and finished even and smooth. (including all type design & pattern) including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2466.78
297
733867.05
... More
Providing and plastering 12mm (Twelve Millimetre) thick and 100mm (Hundered Millimetre) wide plain cement mortar bands in cement mortar 1:4 (One cement isto Four fine sand) with carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1052.4
52
54935.28
... More
Providing & fixing in position 12mm (twelve millimetre) thick SPC (stone polymer composite) flooring with planks consists a melamine film coating one side and aluminium oxide coated tissue on another side of plank (Armstrong or its equivalent), issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Per Kilogram/Cubic metres, over prepared surface with necessary quarter round planks of size 1900mm x 18mm (nineteen hundered into eighteen millimetre) and door reducer of size 1900mm x 44mm (nineteen hundered into forty four millimetre) , wherever required. The wood planks shall have minimum density of 1000 Per Kilogram/Cubic metres (One thousand Per Kilogram Per Per Cubic metre)& minimum Hardness 1000 Per Kilogramf. with Eco friendly UV coating, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
81.93
3533
289532.43
... More
Providing & fixing in position 12mm (twelve millimetre) thick SPC (stone polymer composite) in wall skirting with planks (Armstrong or its equivalent), 1900mm length (minimum) and 85mm (eighty five millimetre) wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded poly ethylene foam sheets having 40Per Kilogram/Cubic metres density over prepared surface. The bomboo wood planks shall have minimum density of 1000 Per Kilogram/Cubic metres (One thousand Per Kilogram Per Per Cubic metre) & minimum Hardness 1000 Per Kilogramf. with Eco friendly UV coating, all as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5.15
3573
18404.56
... More
Providing & fixing in position 12mm (twelve millimetre) thick Engineer wood flooring with planks consists a melamine film coating one side and aluminium oxide coated tissue on another side of plank (Armstrong or its equivalent), issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40Per Kilogram/Cubic metres, over prepared surface with necessary quarter round planks of size 1900mm x 18mm (nineteen hundered into eighteen millimetre) and door reducer of size 1900mm x 44mm (nineteen hundered into forty four millimetre) , wherever required. The wood planks shall have minimum density of 1000 Per Kilogram/Cubic metres (One thousand Per Kilogram Per Per Cubic metre)& minimum Hardness 1000 Per Kilogramf. with Eco friendly UV coating, all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
59.4
3229
191826.36
... More
Providing & fixing in position 12mm (twelve millimetre) thick Engineer wood in wall skirting with planks of sizes (Armstrong or its equivalent), 1900mm length (minimum) and 85mm (eighty five millimetre) wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4mm thick, expanded poly ethylene foam sheets having 40Per Kilogram/Cubic metres density over prepared surface. The bomboo wood planks shall have minimum density of 1000 Per Kilogram/Cubic metres (One thousand Per Kilogram Per Per Cubic metre) & minimum Hardness 1000 Per Kilogramf. with Eco friendly UV coating, all as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4.36
3246
14154.74
... More
Providing and laying 600x 600mm (Six hundered into six hundered millimetre) Double Charge / Ultra Charge vetrified tiles of Restile /Nitco /Rak /Kajaria / Orient -Bell /AGL / Simpolo /Johnson / Somany of approved shade and design, in flooring laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
274.08
1210
331719.02
... More
Providing and laying Double Charge / Ultra Charge Vitrified tiles of Restile/Johnson/ Nitco/Kajaria / AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office Size of Tile 600x600 mm (Six hundered into six hundered millimetre) size (thickness to be specified by manufacturer), with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Per Kilogram per suare metre) including grouting the joint with white cement & matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
18.76
1252
23489.4
... More
Providing and laying 600x600 mm (Six hundered into six hundered millimetres) Full body Matt finish Vitrified tiles of Restile /Nitco / Rak /Kajaria (Eternity)/ Orient -Bell /AGL / Simpolo /Johnson / Somany of approved shade and design, in flooring etcetera laid on a bed of 20mm (twenty millimetre) thick cement mortar 1:4 (One cement isto four sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
583.45
1222
713034.25
... More
Providing and laying 600x600mm sqm (Six hundered into six hundered millimetre) full body matt finish Vitrified tiles of Restile /Johnson/ Rak/Nitco/Kajaria (Etrnity)/ AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office, with water absorption less than 0.08% (Zero point zero eight percent) and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three Per Kilogram per Per Square metre) including grouting the joint with white cement and matching pigments etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
27.83
1249
34776.37
... More
Providing and fixing (600x1200 x10-12)mm (Six hundered into Twelve hundered into Ten to Twelve millimetre) acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
160.05
1336
213874.82
... More
Providing and fixing Ist quality Acid and alkali resistant tile wall tiles size (300x300)mm (Three hundered into three hundered millimetres) conforming to IS: 15622 , of approved make (kajaria, NITCO, Somany, Orient, RAK, Johnson), in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer In Charge, in skirting, risers of steps and dados, over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement isto Three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (Three point three Per Kilogram per Per Square metre), including pointing in white cement mixed with pigment of matching shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
136.8
1453
198852.48
... More
Providing and laying 300x300 mm (Three hundered into three hundered millimetres) antiskid ceramic tiles of premium quality of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles as per approved shade in flooring on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement isto four sand) finished with flush pointing in white cement including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
286.02
1255
359126.71
... More
Providing and fixing Ist quality ceramic glazed wall tiles size (300x300x10)mm (Three hundered into three hundered millimetres), conforming to IS: 15622 , of approved make Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer In Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ((One cement isto Three coarse sand) ) and jointing with grey cement slurry @ 3.3kg per sqm (Three point three Per Kilogram per Per Square metre), including pointing in white cement mixed with pigment of matching shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50.72
1334
67685.84
... More
Providing and laying 300x450 mm (Three hundered into four hundered fifty millimetres) Ceramic Glazed tiles of Nitco / Orient / Bell / Kajaria in skirting risers of steps and dados with cement mortar 1:3 (One cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
877.58
1363
1196141.54
... More
Providing and fixing Ist quality ceramic glazed wall tiles size (300x600x5) mm (Three hundered into Six hundered millimetres), conforming to IS: 15622 , of approved make (kajaria, NITCO, Somany, Orient, RAK, Johnson), in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer In Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,(Three point three Per Kilogram per Per Square metre), including pointing in white cement mixed with pigment of matching shade complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
7.25
1420
10295
... More
Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone minimum Size 55x55cm / 55x27.5 cm (Fifty five into Fifty five / Fifty five into twenty seven point five centimetre) of uniform colour with 7.5cm (Seven point five centimetre) wide Jaislmer Yellow marble band of same shade that of flooring of approved shade as per detail slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 4 (One cement isto Four coarse sand) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1436.04
2378
3415190.33
... More
Providing and laying mirror polished 25mm (Twenty five millimetre) thick Kota stone single piece slab in treads of steps with uniform nosing / edging laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
218
2535
552695.4
... More
Providing and laying Kota stone slabs 25mm (Twenty five millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) (average) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
207.3
2467
511450.56
... More
Providing and fixing 19mm (Nineteen millimetre) thick black granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps, pantary / under counter wash basin and water trough, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
27.24
4178
113830.51
... More
Providing and fixing 19mm (Nineteen millimetre) thick Sadar Ali / Red lakha of required shade Granite stone granite in combination 80% polished and 20% unpolished single slab with 50mm (Fifty millimetre) wide flaming band near uniform round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for tread of steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement isto 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra all complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
43.68
4306
188103.55
... More
Providing and laying 19mm (Nineteen millimetre) thick Sadar Ali / Red lakha / Black granite in risers of steps, skirting dado and pillars laid on with special adhesive over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement isto three coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14.56
3839
55901.23
... More
Providing and fixing 2mm (Two millimetre) thick seamless anti dissipative homogenous vip conductive esd control vinyl tile flooring of size 600 x 600mm (Six hundered into six hundered millimetre) of approved colour of l.g. or its equivalent with poluurethane conductive adhesive. the joints of the tile floor shall be given u shaped groove with grooving machine to insert welding bars. the tile joints shall be welded by heat fusion process to get seamless floor. the projected welding bars shall be trimmed with the crescent shaped knife and attached sledge so that it would flush with flooring. the edge of the skirting shall be sealed with sealant of approved make. copper grounding strips 0.5mm (Zero point Five millimetre) thick & 25mm (Twenty Five millimetre) wide shall be laid on the floor below in the adhesive in the border and crossed junction and connected to copper wiring of grounding. the tile flooring should have an electrical resistance of 2.5 x 10 (Two point five millimetre) to 2.5 x 10 ohms as per din 51953, stmf 150 (One hundred fifty millimetre) or nepa 99 b1 class of fire ressistance and should meet ul standard 779* standard for electrically conductive flooring. colored, curbed or mosaic/ metalled finish laid with approved adhesive all floor as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
106.7
1050
112035
... More
Providing and fixing 40mm (Forty Millimetre) wide (18-20) mm (Eighteen to twenty millimetre) thick marble stone strip moulding above panneling work/ tile work/ other similar work, including machine polishing to edge to give high gloss finish etcetera including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
184.89
411
76100.72
... More
Providing and fixing at all height wall panelling with 8mm water proof/termite resistant teak ply conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 30mm (fifty into thirty millimetre) on 600mm (six hundered millimetre) centre to centre with soft/hard wood frame including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner 55mmx30mm (fifty five into thirty millimetre) lipping/edging and (25x12) mm (twenty five into twelve millimetre) beading of triangular shape to the junction of panelling etc. with iron screws all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
214.62
1691
363115.58
... More
Providing and fixing wall Paneling with Acoustical panels of 600x1200x25 mm (Six hundered into twelve hundered into twenty five millimeter) of Arm strong acoustical /Dexune acoustical / Prolad Acoustical/ Himalyan acoustical/Gyp tech acoustical/Everest acoustical panels on the 'W' profile (0.55 (Zero point Five Five millimetre) mm thick) having a knurled web of 51.55 mm (Fifty One point Five Five millimetre) and two flanges of 26 mm (Twenty Six millimetre) Per Number with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm (Twenty millimetre) and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-incharge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. Including frame work with G.I section chanel including carriage of material up to all leads and lifts and as per direction of Engineer In Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
105.15
4343
456750.57
... More
Providing and laying 300x300x25mm (Three hundered into Three hundered into Twenty five millimetres) Labrador Design ( Rainbow Series) tiles of NTC / Unistone / Atlantic in flooring of ramp for person with disability on 20mm (Twenty millimetre) average thick base of cement mortar 1:4 (One cement isto Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
551
1255
691890.7
... More
Providing and laying Heat Resistant Terrace Tiles 300mmx300mmx20mm (Three hundered into Three hundered into Twenty millimetres) thick with SRI (solar refractive index) 78 Sevety Eight) , solar reflection 0.70 (Zero point Seventy) and initial emittance0.75 (Zero point Seventy Five) on waterproof and sloped surface of terrace, on 20mm (Twenty millimetre) thick bed of cement mortar 1:4 (One cement isto four coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 (Three) cuts complete, including providing skirting upto 150mm (One hundred fifty millimetre) height along the parapet walls in the same manner including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2209.9
1356
2996624.4
... More
Providing and fixing 30mm (Thirty millimetre) thick Pioneer brick tile masonry work with common burnt clay F.P.S. (nonmodular), tile bricks of class designation 10 in cement mortar 1:3 (One cement isto Three coarse sand) in superstructurelaid & screwed in position and jointed with white cement slurry @ 5.0 kg/sqm (Five Per Kilogram per Per Square metre) including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etcetra all complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
988.32
2315
2288751.46
... More
Providing and fixing 12mm.(Twelve millimetre) thick Unistone cladding on Reinforced Cement Concrete surface side as on faces of Arch masonry walls etcetera on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
268.8
1176
316296.96
... More
Providing and fixing 50mm (Fifty millimetre) thick precast factory made glass reinforced concrete Jali panels of approve size. Pattern, design, thickness and colour of NTC make or its equivalnent. the panels should be make from 53 (Fifty three) grade of white Portland cement manufactured by "JK cement" or its equivalent Quartz, Fine Silica, Sand, alkali resistant Glass fiber manufactured by 'Ownes corning' or its equivalent, Super Plasticizers manufactured by 'BASF' or its equivalent Polymers manufactured by 'BASF'or its equivalent and UV resistant synthetic inorganic pigments should be used for pigmentation manufactured by 'BAYFERROX (Germany) or its equivalent.The material casting should take place in FRP Mould.The fixing of Screen should be 'DRy fixing' such that to be done with stainless steel (SS-304) 'L' shaped brackets, fasteners and pins including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
43.2
3159
136481.76
... More
Providing and applying Birla / J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface upto floor all level complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3976.21
95
379728.06
... More
Providing and painting Wall painting (two coats) with Premium acrylic emulsion of Asian / Dulux /Berger paints/Nerolac paints) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
394.47
132
52148.93
... More
Providing and painting two coats wall painting with Plastic emulsion paint of Asian / Dulux /Berger paints/Nerolac paints) for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
701.33
118
83388.14
... More
Providing and painting two coats with silicon & acrylic emulsion of Asian / Dulux /Berger paints/Nerolac paints (above Dado/skirting) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1460.86
120
175595.37
... More
Providing and Wall painting (two or more coats) with acrylic washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2617.53
116
304156.99
... More
Providing and painting walls with apex weather proof exterior emulsion of Asian or its equivalent of approved shade having VOC less than 50 gm/Per Litre (Fifty gram per Per Litre ) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives New work (Two or more coats applied @ 1.43 Per Litre / 10 Per Square metre (One point forty three Per Litre per ten Per Square metre) over and including priming coat of exterior primer applied @ 0.90 Per Litre /10 Per Square metre (Zero point ninety Per Litre per ten Per Square metre) upto all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
788.82
137
108699.4
... More
Providing & finishing surface with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer's specifications including preparation of surface, etcetra complete as per approved brand (Berger Shalimar, Asian paints, ICI Nerolac) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
881.01
152
133913.52
... More
Providing and painting with oil type wood preservative of approved brand and manufacture for new wood work by applying two or more coats, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
677.87
92
62906.34
... More
Providing and applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming as per approved brand (Berger / Asian paints or its equivalent) including carriage of material up to all leads and lifts and as per direction of Engineer In Charge.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
446.25
52
23338.88
... More
Providing and polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
214.62
279
59943.37
... More
Providing and painting two coats(excluding priming coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
463.25
115
53273.75
... More
Providing and laying damp-proof course 50mm (Fifty millimetre) thick with with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
97.73
414
40538.4
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade-Ten) of approved quality using 1.7 Per Kilogram/Per Square metre (One point seven Per Kilogram per Per Square metre) on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
97.73
166
16291.59
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: i) Ist course of applying cement slurry @ 4.4 Per Kilogram/Per Square metre mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixedwith water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Per Kilogram.per Per Square metre of area.
iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to Per Number other with bitumen @ 1.7 Per Kilogram/Per Square metre). complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
281.62
792
223183.85
... More
Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD (P-3160-3mm) to the clean and saturated surface maintaining a coverage 0.60 Per Square metre (Zero point six zero squate meter) per Per Kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed upto 300mm (Three hundred millimetre) vertically. The second coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred milliPer Litre ) per 50 (Fifty Per Kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1276
531
677683.6
... More
Providing and applying treatment of soil under proposed floors in proportion of dilute compound by using 1.0 Per Litre (One lite) water @ 2.5 milliPer Litre (Two point five millimetre) chemical emulsion (Imidacloerid 30.5% thirty point five percent SC) and using diluted compound @ one Per Litre per hole, 300mm (Three hundered millimetre) and laying of PVC pipes condiuts of approved make (Termi Pores/ Irrigate Pores) apart including drilling 12mm (Twelve millimetre) diameter holes and plugging with cement mortar 1:2 (one cement isto two coarse sand) to match the floor: The laying of material shall be got done through the authorised applicator of the manufacturer of material including carraige of materials upto all leads and lifts as per Engineer-In-Charge.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
936.86
259
242834.11
... More
Providing and fixing 25mm (Twenty five millimetre) thick Commercial Board water proof shutters for cup boards including) fixing with SS piano hinges with screws etc. complete as per approved make (Nova pan, Kit ply, National, Archidply, Action Tesa, Green Ply) with 25x6mm hard wood lipping/edging complete as per architectural drawings specifications, design and as per the directions of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
120.65
2937
354421.44
... More
Providing and fixing 25mm (Twenty five millimetres) thick panelled or panelled & glazed shutters of commercial Board water proof shutters for cup boards including fixing of 4.0mm (four point zero millimetre) thick float glass with beading & Nickel plated Stainless steel hinges with screws etcetra with 25x6mm (Twenty five into Six millimetres) hard wood lipping/edging complete as per approved make (Nova pan, Kit ply, National, Archidply, Action Tesa, Green Ply) including carriage of material upto all leads and lifts as per Engineer-In-Charge.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
114.2
2896
330780.3
... More
Providing and fixing complete box with internal partition and shelves shall be made of 19mm (Nineteen millimetre) thick waterproof termit resistant commercial board with butt joints & fixing with nails & screws etc. and back side of cup board shall have 8mm (Eight millimetre) thick waterproof ply. The shutters from all side also have 6mm (Six millimetre) thick hard wood edges / lipping all round been mix fnished both side with 1mm (One millimetre) thick lemination of as per approved make (Nova pan, Kit ply, National, Archidply, Action Tesa, Green Ply) including carriage of material upto all leads and lifts as per Engineeer-In-Charge.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
114.2
4063
463994.6
... More
Providing and fixing 1.00mm (one millimetre) thick colored or plain lamination sheet as per approved make (Nova pan, Kit ply, National, Archidply, Action Tesa, Green Ply) on boards/ply wood sheets with approved adhesive and nails complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
114.2
1255
143378.1
... More
Providing and fixing First class deodar wood plain square edged cover fillets (beading) 50mmx25mm (Fifty into Twenty Five millimetre) section, with wood screws in ceiling and lining including mitring at junction including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
100
257
25760
... More
Providing and fixing aluminum U beading 2.5mm (two decimal five milliemetre) thick of required size to Pre-laminated/ flush door shutter, including fixing etcetra complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
80
530
42440
... More
Providing and fixing Stainless steel curtain rail with rollers stop ends and brackets in pelmets with curtain rod of 25 mm (Twenty five millimetre) diametre and brackets etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
98
298
29272.6
... More
Providing and fixing 125mm (one hundered twenty five millimetres) nominal size double acting spring hinges with necessary brass screws complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
627
2510.4
... More
Providing and filling the gap in between aluminium/uPVC frame & adjacent RCC/ Brick/ Stone work upto 5mm depth and 5 mm width by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1242.3
88
109570.86
... More
Providing and fixing 300x16mm (Three hundered into Sixteen millimetre) stainless steel sliding door bolts, ISI marked , transparent or dyed to required colour or shade, with nuts and screws etcetra complete and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
471
1885.2
... More
Providing and fixing 250x16mm (Two hundered fifty into Sixteen millimetre) stainless steel sliding door bolts, ISI marked , transparent or dyed to required colour or shade, with nuts and screws etcetra complete and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
360
1442
... More
Providing and fixing 200x10mm (Two hundered into ten millimetre) stainless steel tower bolts, ISI marked, transparent or dyed to required colour or shade, with necessary screws etcetra complete and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8
385
3082.4
... More
Providing and fixing 100x10mm (One hundered into ten millimetre) stainless steel tower bolts, ISI marked, transparent or dyed to required colour or shade, with necessary screws etcetra complete and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
163
655.6
... More
Providing and fixing 100x10mm (One hundered into ten millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
159
222
35313.9
... More
Providing and fixing 250x16mm (Two hundered fifty into Sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
72
263
18979.2
... More
Providing and fixing 200x10mm (Two hundered into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
72
105
7596
... More
Providing and fixing 150x10mm (One hundered fifty into Ten millimetres) nominal size aluminium Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
111
76
8491.5
... More
Providing and fixing 150x10mm (One hundered fifty into Ten millimetres) ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
53
215.6
... More
Providing and fixing 100x10mm (One hundered into Ten millimetres) ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
39
79.2
... More
Providing and fixing bright finished brass 100 mm (one hundered ten millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles of approved quality with necessary screws etcetra complete, including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
43
715
30749.3
... More
Providing and fixing 65x35mm (Sixty five into thirty five milllimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra (Indian make of approved quality) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
220
285
62898
... More
Providing and fixing 150mm (One hundered fifty millimetre) size cup-board shutter magnetic catcher with necessary screws etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
880
46
40480
... More
Providing and fixing powder coated telescopic drawer channels 450 mm (four hundered fifty millimetre) long with necessary screws etcetra complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
150
448
67260
... More
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
150
15
2310
... More
Providing and fixing 125x34x24 mm (one hundered twenty five into thirty four into twenty four millimetre) weighing not less than 23 (twenty three) gms size of bright finished PTMT handles with screws complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
75
66
4965
... More
Providing and fixing 125mm (One hundered twenty five millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
152
459
69768
... More
Providing and fixing 100mm (One hundered millimetres) nominal size aluminium Handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera, complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
78
361
28181.4
... More
Providing and fixing 125mm (One hundered twenty five millimetres) Mild Steel handles, ISI marked, required colour and shade, with necessary screws etcetera, complete including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
54
216
... More
Providing and fixing aluminium hanging twin floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
66
91
6039
... More
Providing and fixing aluminium hanging single floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
43
49
2147.42
... More
Providing and fixing 250mm (Two hundered fifty millimetre) long aluminium casement stay, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera, complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
14
91
1274
... More
Providing and fixing 150mm (One hundered fifty millimetre) long aluminium casement stay, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera, complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
9
69
621
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg (one hundered twenty five Per Kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8
2449
19599.2
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg (thirty six to eight Per Kilogram) and door width from 701 mm to 1000 mm) (seven hundered one to onbe thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
109
1260
137385.78
... More
Providing and fixing of expansion joint, floor Joint of 40 mm (forty millimetre) gap, system related with floor location as per drawings and direction of Engineer-In-Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. as per ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall expansion control system for various vertical localtion in load application areas that accommodates multi directional seismic movement without stress to it's components. System shall consist of metal profiles with a universal aluminum base member designed to accommodate various project conditions and finish floor treatments. The cover plate shall be designed of width and thickness required to satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer’s preengineered self- centering arrangement that freely rotates / moves in all directions. The Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer -in- Charge. (Material shall confirm to ASTM 6063). complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
40
3197
127880
... More
Providing and fixing 150 mm (one hundered fifty millimetre) wide sheet covering over expansion joints with iron screws as per design, Aluminium fluted strips 3.15 mm (three decimal fifteen millimetre) thick, complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
40
515
20612
... More
Excavating trenches of required width for pipes, cables, etcetra including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm (Twenty centimetree) in depth, including consolidating Per Number deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
121
142
17206.2
... More
Providing and plastering 15mm Cement plaster in cement mortar 1:3 (1 cement : 3 sand) in single coat on the fair side of brick/ concrete/ stone walls for interior plastering upto all floor level including arrises,internal rounded angles, chamfers and/or rounded angles and finished even and smooth. (including all type design & pattern) with carraige of materials upto all leads and lifts as per Engineer-In- Charge.The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
74.8
299
22390.63
... More
Providing and fixing 150 mm (One hundered fifty millimetre) diametre on wall face unplasticised Rigid PVC (D-Plast) rain water pipes single socketed conforming to IS : 13592 Type A ISI marked of Finolex/Relpipe (Reliance) /Vectus working pressure not less than 4/6 kg/cm2 (Four/Six Per Kilogram per centimetre sqaure), including jointing with seal ring conforming to IS : 5382 including jointing with seal ring leaving 10mm (Ten millimetre) gap for thermal expansion including filling the joints with approved adhesive complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
201.6
604
121947.84
... More
Providing and fixing 150mm (One hundered fifty millimetre) Plain Bend on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six Per Kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
56
321
17998.4
... More
Providing and fixing 150mm (One hundered fifty millimetre) Plain Shoe on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six Per Kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
38
252
9610.2
... More
Providing and fixing 150mm (One hundered fifty millimetre) PVC holder bat clamps of approved design to PVC rain water pipe and making good the walls etcetera; as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
134
79
10653
... More
Providing and fixing (2400 x 1200 x 12)mm (Twenty four hundered into Twelve hundered into Twelve millimetre) green chalk board (Non - Megnatic) with superior quality framing speacialy anodised alumunium profile 20x15mm with corners of black surfaces shall be Non - Torous seramic particles on the top green surface for smooth writing with chalk over 11 mm thick particle board which shall have backing maetirials of galvanised sheet 0.28mm thick aprox. The board shall be fixed on the wall with speacialy desigined 'J' Clamp and suqare clamp with the help of nylon shalves and screws as per site requirement including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
13
4800
62400
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal bore/diametres High pressure PVC waste and ventilating having pressure pipes 4.00 kg/cm2 (Four point zero zero Per Kilogram per centimetre square) of Finolex/ Vectus/Relpipe (Reliance) including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
184.35
291
53664.29
... More
Providing and fixing 150mm (One hundered fifty millimetre) nominal bore/diametres High pressure PVC waste and ventilating having pressure pipes 6.00 kg/cm2 (Sixr point zero zero Per Kilogram per centimetre square) of Finolex/ Vectus/Relpipe (Reliance) including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
190
602
114551
... More
Providing and fixing 75mm (Seventy five millimetre) nominal bore/diametres High pressure PVC waste and ventilating having pressure pipes 4.00 kg/cm2 (Four point zero zero Per Kilogram per centimetre square) of Finolex/ Vectus/Relpipe (Reliance) including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
117.95
158
18683.28
... More
Providing and fixing 150mm (One hundered fifty millimetre) nominal size PVC plain bend of required degree ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
32
321
10284.8
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal size PVC plain bend of required degree ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
80
287
22968
... More
Providing and fixing 75mm (Seventy five millimetre) nominal size PVC plain bend of required degree ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3 mm (Three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
150
7505
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (Three millimetre) thick ISI marked of Finolex/Relpipe (Reliance)/Vectus complete including fixng with approved adhesive etcetera complete in all floor level/height etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
36
204
7376.4
... More
Providing and fixing 110x75mm (One hundered ten into seventy five millimetres) nominal size/diameter PVC floor trap ISI marked Finolex/Relpipe(Reliance)/ Vectus Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floor etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
100
1202
120290
... More
Providing and fixing 150mm (One hundered fifty millimetre) nominal size PVC Collar of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15
198
2970
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal size PVC Collar of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
170
8530
... More
Providing and fixing 150mm (One hundered fifty millimetre) nominal bore/diametres P.V.C clamps ISI marked of Finolex/Relpipe (Reliance)/Vectus etcetera including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
79
3975
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal bore/diametres P.V.C clamps ISI marked of Finolex/Relpipe (Reliance)/Vectus etcetera including finishing with approved design with steel screws and rawal plugs etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
90
120
10854
... More
Providing and fixing 75mm (Seventy five millimetre) nominal size PVC Cowl of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
100
400.4
... More
Providing and fixing 90mm (Ninety millimetre) nominal size PVC Cowl of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5
127
637.5
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal size PVC Cowl of ISI marked Conforming to BIS-14735-99 of Finolex/Relpipe(Reliance)/ Vectus including filling with approved adhesive etcetera complete in all floor level/height complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
298
1792.8
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundered into three hundered millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four decimal five Per Kilogram) and frame to be not less than 2.70 kg as per standard design: 100x100 mm (one hundered into one hundered millimetre) size P type, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
3433
34332
... More
Providing and fixing white vitreous china flat back single half stall urinal Large flat back no 60002 of size 39x37.5x59cm (Thirty nine into thirty seven point five into fifty nine centimentre) with white PVC automatic flushing cistern of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details with ittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required with 10 (Ten) Per Litre P.V.C. automatic flushing cistern including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
22
6523
143506
... More
Providing and fixing 600x300mm (Six hundered into Thre hundered millimetres) nominal size of Division Plate for Urinals Hindware /cera/Jaquar of star white / snow white shade and (Heavy duty make ISI marked No- 8931 & 8934) of approved quality and colour complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
22
1226
26978.6
... More
Providing and fixing vitreous china pedestal type floor mounted water closet (European type) Model No. 92076 with size (475x370x420)mm (Four hundered seventy five intoThree hundered Seventy into Four hundered Twenty millimetre) nominal size with seat and lid, 10 Per Litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings and C.I. brackets, 40 mm (Forty millimetre) flush bend 20mm (Twenty millimetre) over flow pipe with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
6437
38622
... More
Providing and fixing white vitreous china pedestal type water closet (European type) Model No. 20087 (S - 10 ) Size 57x 35x39cm (Fifty seven into thirty five into thirty nine centimetre) nominal size with seat and lid, 10 Per Litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings and C.I. brackets, 40 mm (Forty millimetre) flush bend 20mm (Twenty millimetre) over flow pipe with seat & lid fixed with C.P. brass hinges and rubber buffers,with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand. (Jet Spray to be measured and paid for separately) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
22
4830
106271
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (Five hundered thirty into Four hundered ten millimetre) with integral type foot rests with 100 mm (One hundered millimetre) diametre sand cast Iron P or S trap, 10 Per Litre (Ten) low level P.V.C. flushing cistern having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
19
4671
88764.2
... More
Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 Per Litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40mm (Forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid Per Number including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
10381
41525.2
... More
Providing and fixing Health faucet ABS with rubbit cleaning system, flexible tube upto 1.25 (one decimal two five metre) long PVC Flexible tube & ABS wall hook to extended wall mounted type W.C. of quality and make (Kingston, Gem, Parko, JAL, ESS, Jaquar, Seiko) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
1346
8076.6
... More
Providing and fixing wash basin White Vitreous China Flat back wash basin Delta No 10010 size 550x 400 mm (Five hundered fifty into four hundered millimetre) (Under counter Basin ) Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
4349
26098.2
... More
Providing and fixing vitreous china wash basin garnet No-10080 Cera / Hindware Jaguar/Snow white/star white shade 58x43cm (Fifty eight into forty three centimetres) under counter basin with single hole for pillar tap including 15mm (Fifteen millimetre) diametre Pillar Tap with C.I. or M.S. brackets painted white including cutting holes and making good the same with pedestal but excluding fittings including neccessary fitting complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
46
4626
212823.6
... More
Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 610x510x250 mm (Six hundered ten into five hundered ten into two hundered fifty millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
5685
5685.7
... More
Providing and fixing 600x450x200mm (Six hundered ten into four hundered fifty into two hundered millimetres) white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste with necessary C.P. brass unions complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
4779
14337.3
... More
Providing and fixing 15 mm (Fifteen millimetre) diametre nominal bore, twin C.P. brass mixer for bathing including CP brass pipe for shower to tap of approved quality conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
3492
3492.8
... More
Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass. Bib tap of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
90
724
65178
... More
Providing and fixing CP 15 mm (Fifteen millimetre) diametre, 98mm (Ninety Eight long) push cock of approved quality and colour of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
16
403
6448
... More
Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
1838
1838.1
... More
Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of standard design and of approved make continental series of Jaquar / Hindon series of Jal / ESS (superior or heavy type) conforming to IS:8934 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
40
585
23432
... More
Providing and fixing 32mm (Thirty two millimetre) diametre P.V.C. flexible waste pipe of Finolex/ Relpipe (Reliance) / Vectus for sink or wash basin including P.V.C. waste necessary fitting complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
74
194
14400.4
... More
Providing and fixing C. P. Brass overhead shower rose with 15mm (fifteen millimetre) inlet: 85mm (eighty five millimetre) with single flow and shower arm of Continental series of Jaquar / Hindon series of Jal / ESS including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
2095
2095.2
... More
Providing and fixing C. P. Brass 25mm (twenty five millimetre) nominal size gun metal gate valve with C.I. wheel of approved quality (screwed end) of Continental series of Jaquar / Hindon series of Jal / ESS including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5
652
3264
... More
Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass angle valve of of Continental series of Jaquar / Hindon series of Jal / ESS including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
40
585
23404
... More
Providing and fixing 1216 15mm (Fifteen millimetres) Outer diameters Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 (One) metre spacing for concealed work including cutting chases and making good the wall etcetera. This includes testing of joints complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
300
480
144240
... More
Providing and fixing 1620 20mm (Twenty millimetres) Outer diameters Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetera, with clamps at 1.00 (One) metre spacing for concealed work including cutting chases and making good the wall etcetera. This includes testing of joints complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
120
523
62772
... More
Providing and fixing 15mm (Fifteen milimetres) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) ISI make approved quality tube fitting and clamps including making good the wall, ceiling and floor complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
105
257
27024.9
... More
Providing and fixing 20mm (Twenty millimetres) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) ISI make approved quality tube fitting and clamps including making good the wall, ceiling and floor complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
305
15265
... More
Providing and fixing 25mm (Twenty five millimetres) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) ISI make approved quality tube fitting and clamps including making good the wall, ceiling and floor complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
30
353
10604.7
... More
Providing and fixing flat back 600x450mm (Six hundered into Four hundered fifty millimetres) beveled edge mirror of modi guard / Saint Gobain superior glass complete with 6mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
1500
9003.6
... More
Providing and fixing 1500x750 mm (Fifteen hundered into Seven hundered fifty millimetres) beveled edge mirror of modi guard / Saint Gobain superior glass complete with 6mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
16
2385
38172.8
... More
Providing and fixing 600x120x5mm (Six hundered into One hundered twenty into five millimetres) glass shelf of Continental series of Jaquar / Hindon series of Jal / ESS with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (Fofrty millimetre) long screws, rawl plugs etcetera including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
863
5178
... More
Providing and fixing CP brass soap Dish Holder having length of 138mm (One hundered thirty eight millimetre), breadth 102mm (One hundered two millimetre), height of 75mm (seventy five millimetre) with concealed fitting arrangements, weighing not less than 106gms (One hundered six grams) Hindon series of Jal / ESS including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
60
295
17736
... More
Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) of approved brand and manufacture continental series of Jaquar / Hindon series of JAL / ESS including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
463
23165
... More
Providing and fixing Mixer for kitchen sink/wash basin with casted swinging spout at top Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintage series of Kerovite and Hindon series of Jal including neccessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
550
27525
... More
Providing and fixing 32mm (Thirty two millimeter) nominal size diameters C.P. waste for wash basin or sink including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government..
5
169
849
... More
Providing and fixing 100mm (One hundered millimetres) diametre C.P. iron grating of Superior quality of Continetal series of Jaquar/Classik series of Hindware/Floral series of Cera/Vintage series of Kerovite and Hindon series of JAL for floor, gully or Nahni trap including neccessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government..
14
80
1131.2
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore P.V.C. connection pipe with brass union 45cm (Forty five Centimeters) length complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
30
162
4863
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore/diametre brass full way valve with wheel of Continental series of Jaquar / Hindon series of Jal without nuts and pipes including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
26
519
13499.2
... More
Providing and fixing 20mm (twenty millimetres) nominal bore/diametre brass full way valve with wheel of Continental series of Jaquar / Hindon series of Jal / ESS without nuts and pipes including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
17
546
9295.6
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal size PVC single equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
25
228
5712.5
... More
Providing and fixing 75 mm(Seventy five millimetre) nominal size PVC single equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
131
1316
... More
Providing and fixing 150mm (One hundered Fifty millimetre) nominal size PVC single equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15
263
3946.5
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal size double equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20
643
12874
... More
Providing and fixing 150mm (One hundered Fifty millimetre) nominal size double equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5
713
3565
... More
Providing and fixing 110mm (One hundered ten millimetre) nominal size plain double equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12
436
5233.2
... More
Providing and fixing 150mm (One hundered Fifty millimetre) nominal size plain double equal branch with oval access door, ISI marked of Finolex/Relpipe (Reliance)/Vectus insertion rubber washer 3mm (Three millimetre) thick including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5
699
3495.5
... More
Providing and fixing 150mm (One hundered fifty millimetre) Plain Shoe on wall face PVC acessories for rain water pipes working pressure 4/6 kg/cm2 (Four/Six Per Kilogram per centimetre sqaure) ISI marked of Finolex / Relpipe (Reliance)/Vectus including priming coat, painting and welding etcetera complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15
252
3793.5
... More
Providing and fixing 600x20mm (Six hundered into twenty millimetres) size CP Brass towel rail of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintagee series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
889
44455
... More
Providing and Fixing Charomium plated 40mm (forty millimetres) diametre steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
628
628.7
... More
Providing and fixing CP brass towel ring trapezoidal shape 215 mm (two hundered fifteen millimetre) long, 200 mm (two hundered millimetre) wide with minimum distances of 37 mm (thirty seven millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 (eighty eight) gms of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintagee series of Kerovite & Hindon series of Jal complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
52
436
22718.8
... More
Providing and placing on terrace (at all floor levels polyethylene water storage tank, tripple layer of Finolex/Relpipe (Reliance)/Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ccomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20000
9
180000
... More
Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty millimetre to forty millimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
558
558.9
... More
Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size in all round for PVC pipe of 150mm (One hundered fifty millimetres) internal diametre including bedding necessary form work and curing ccomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
369
18465
... More
Providing and laying cement concrete 1:3:6 (One cement isto three sand isto eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size in all round for PVC pipe of 150mm (One hundered fifty millimetres) internal diametre including haunching necessary form work and curing ccomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50
263
13180
... More
Providing and construction of brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand) with R.C.C. top slab with 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size finished with floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimetres) and 45 cm (Forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundered fifty five into six hundered ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 Per Kilogram (Thirty eight Per Kilogramme) (weight of cover 23 Per Kilogram (Twenty three Per Kilogramme) and weight of frame 15 Per Kilogram (Fifteen Per Kilogramme) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12
10315
123790.8
... More
Providing and construction of brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand) with R.C.C. top slab with 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate 20mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded crushed stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded crushed stone aggregate 20 mm (Twenty millimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (One hundered twenty into ninety centimetres) and 90 cm (ninety centimetres) deep including C.I. cover with frame (medium duty) 500 mm (Five hundered millimetres) internal diameter, total weight of cover and frame to be not less than 116 Per Kilogram (One hundered sixteen Per Kilogramme) (weight of cover 58 Per Kilogram (Fifty eight Per Kilogramme) and weight of frame 58 Per Kilogram (Fifty eight Per Kilogramme)) : With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
7
19418
135931.6
... More
Providing and Construction of brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm (Four hundered fifty five into six hundered ten millimetres) internal dimensions, total weight of cover with frame to be not less than 38 Per Kilogram (Thirty eight Per Kilogramme) (weight of cover 23 Per Kilogram (Twenty three Per Kilogramme) and weight of frame 15 Per Kilogram (Fifteen Per Kilogramme)), R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five Fine sand isto three graded stone aggregate 20 mm (twenty millimetres) nominal size), foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate 40 mm (Forty millimetres) nominal size), inside plastering 12 mm (Twelve millimetres) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundered fifty five into six hundered ten millimetres) and 45 cm (Forty five centimetres) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five centimetres) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12
6307
75694.8
... More
Providing and fixing 455x610mm (four hundered fifty five into six hundered ten millimetre) light duty rectangular C.I. manhole with frame cover weight 38Per Kilogram (thirty eight Per Kilograms) (single seat) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
2111
4223.4
... More
Providing and fixing C.I. cover 300x300 mm (three hundered millimetre into three hundered millimetre) without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Per Kilogram (four decimal five Per Kilogram) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
1834
3669.66
... More
Providing and fixing 560 mm (five hundered sixty millimetre) diametre precast R.C.C. heavy duty manhole cover with frame Circular shape - H.D-20 (heavy duty) complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
1810
3620
... More
Providing and fixing of water lifting pump of 1.00 HP (One point zero horse power) of serex/Kirloskar/Crompton/Wortington including all necessary fittings complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
3500
3500
... More
Providing and fixing 25mm (twenty five millimetre) diametre fire hydrent including all necessary fittings complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as per directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
7500
7500
... More
Consolidation of sub grade compacting with three wheel 80-100(eighty -hundred) KN static roller to achive the desired density complete as per technical specification clause 401 for grading -1 Material as per the entire satisfaction and directions of Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
200
1
300
... More
Providing and construction of granular sub-base by providing well graded materials,spreading in uniform layers with mortor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100(eighty -hundred) KN static roller to achive the desired density complete as per technical specification clause 401 for grading -1 Material as per the entire satisfaction and directions of Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
30
2077
62310
... More
Providing and laying 80mm (Eighty millimetre) thick factory made cement concrete interlocking paver block of NTC / Unistone / Atlantic vibro compacted upto M-40 (M-forty) grade including border or kurb block grey or coloured over sub-base of concrete with 50mm ( fifty millimetre) thick average thickness of sand bed and jointed with fine sand in joint of blocks including curing rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
200
1154
230900
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements