Public Works Department Tender

Excavation in earth work for structure in all heights and depths in all kinds of soil including ordinay rock,hard rock (Requiring blasting), hard rock(blasting prohibited), marshy soil and their intermediate classification. If water is met due to stream flow, seepage, rain and other causes it shall be removed by suitable diversion, pumping and bailing out and the excavation shall be kept dry whenever so required by the contractor at his own cost , including dressing of slopes and beds setting out conforming to required lines, grades , side slopes as shown in the drawing and as per direction of Engineer-in-charge and transportation of soil to road way after back filling and then disposing of surplus excavated earth in acquired width of road or on approved dumping sites including its stacking, leveling and dressing in all leads and lifts through all modes of transportation including head load animal load or mechanical means or other incidentals to complete the work as per technical specifications clause 305.1. All useful materials,such as stone shingles, agg. and slates shall be sorted out and stacked along road sides to the maximum possible extent in all leads and lifts. Any loss to the public and private property during the course of execution of disposal of serviceable and un-serviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by him in all respects.

Providing and laying Concrete for plain/rinforced concrete1:2:4 (one cement: two sand: four graded stone aggregate ) in open foundation complete as per drawing and technical specifictions clause 802,803,1202 and 1203.PCC Grade M-20 including haulage/carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing and Erecting a "W" metal beam crash barior comprising of 3 mm thic corrugated sheet metal beam rail 70 cm above road ground level fixed on I.S M.C series channels vertical rowpost 150x75x5mm speced 1.50 metre center to center 1.50 metre height 1.10 metre below ground level all steel parts and fitments to be galvanized hot dip process all fitting to confirm to IS 1367 and IS 1364 metal beam rail to be fixed on the vertical post with a spacer of channals section 150x75x5mm 330 cm long complete as per clouse 810.