Public Works Department Tender

Providing and laying 25mm thick Bituminous concrete using crushed stone aggregates of specified grading 25mm (Twenty five millimetre) compacted thick with bitumnious binder VG-30 (Viscosity Grade -thirty) @ 5.50% (five decimal five zero pertcent of total mix weight) and lime filler 2% (percentage by weight of aggregate) and waste plastic additive @ 8% (percentage by weight of bitumen) with minimum 100-120 TPH capacity (hundred one twenty tonne per hour) hot mix batch type/ drum type plant with electronic control , transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 (eight-ten) tonne capacity or pneumatic type roller of 12-15(Twleve-fifteen tonne) with type pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-7(Six- eight) tonne smooth wheelded tandem rollers to achieve the desired compaction as per CPWD specification 2019, complete and as per directions of Engineer-in-charge including carriage of material within all leads and lifts and other incidentials.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five millimetre) thick 10cm. wide including reflectorising glass beads @ 250 gms (at the rate of two hundred fifty gram per square metre) per sqm area,thickness of 2.5 mm (two point five millimetre0is exclusive of surface applied glass beads as per IRC:35 . The finished surface to be level, uniform and free from streaks and holes. including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing cat eye make) (3M) of size 100x20mm made of heavy duty body shall be molded dual shank ASA /Acyclic styrene acyloretrite ) or HP/High impact polystyrene) ort ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. NOTE: 1) All Type of material shall be arranged by the contractor vide Notification by Additional Secy.to the Govt. of HP vide letter No.PBW(B)©(17)2/0212 dated 7.8.2018 (2) The rates shall be inclusing of all types of taxes including GST etctra) (3) The bidder are requested to submit their bid as per notification issued by the Principal Secy.PW to the Govt.of HP vide letter No.PBW(B) A(3)1/2020 dated 22.7.2020 & Govt. of HP vide letter No.PBW(B) A(3) 1/2020-1 dated 7.10.2021