Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date6 Sep 2024
Closing Date15 Sep 2024
Tender Amount₹ 62,28,508
Costs
EMD
₹ 1,24,570Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_92619_1Bid Award Id
ViewTender No
NIT No 6002-6102 dated 29.08.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Lintals beams, plinth beams, cantilevers, girders, including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
111.79
-
-
... More
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, piers, abutments, post and struts including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
102.48
-
-
... More
Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in stairs cases with slopping or stepped soffits, (excluding landing) except spiral staircase including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12.68
-
-
... More
Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
112.16
-
-
... More
Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced and plain concrete work in Vertical surface such as walls(any thickness) and the like including attached pilasters, buttersses plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12.56
-
-
... More
Providing and laying in position cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and vibrated curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
48
-
-
... More
Providing and laying in position cement concrete 1:5:10 (One cement isto five sand isto ten graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and vibrated curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2.79
-
-
... More
Square rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 (One cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12.91
-
-
... More
Stone Filling in plinth with approved stone under floors including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
12.87
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6.44
-
-
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the compressive strength of 25 N/mm square (Twenty five Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @ 360 kg/cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for All works upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
17.79
-
-
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the compressive strength of 25 N/mm square (Twenty five Newton per square millimetre) for reinforced cement concrete work, using cement contents not less than @ 360 kg/cum (Three hundred sixty kilogram per cubic metre) or as per approved design mix for All works above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
55.89
-
-
... More
Providing Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-500D of Tata Tiscon/Sail for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10734.44
-
-
... More
Brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
50.47
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
105.23
-
-
... More
Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm (forty centimetre into nineteen centimetre into twenty centimetre) including quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size) laid with cement mortar 1:6 (one cement isto six sand) including curing complete in super structure as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
9.16
-
-
... More
Providing 2nd (second) class deodar wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1.16
-
-
... More
30 mm (thirty millimetre) thick factory made Polyvinyl Chloride(PVC) door shutter made of styles and railsof a uPVC hollow section of size 60x30 mm (sixty into thirty millimetre) and wall thickness 2 mm (two millimetre) (± 0.2 mm), withinbuilt decorative moulding edging on oneside. The styles and rails mitred and joint atthe corners by means of M.S. galvanised/plastic brackets of size 75x220 mm (seventy five into two hundred twenty millimetre) having wall thickness 1.0 mm (one point zero) and stainless steelscrews. The styles of the shutter reinforcedby inserting galvanied M.S. tube of size 25x20 mm (twenty five into twenty millimetre) and 1 mm (one millimetre) (± 0.1 mm) wallthickness. The lock rail made up of 'H'section, a uPVC hollow section of size100x30 mm (one hundred into thirty millimetre) and 2 mm (two millimetre) (± 0.2 mm) wall thickness fixed to the shutter styles bymeans of plastic/ galvanised M.S. 'U' cleats.The shutter frame filled with a uPVC ultichamberedsingle panel of size not less than 620 mm (six hundred twenty millimetre), having over all thickness of 20 mmand 1 mm (± 0.1 mm) wall thickness.The panels filled vertically and tie bar at twoplaces by inserting horizontally 6 mm (six millimetre) galvanised M.S. rod and fastened withnuts and washers, complete as permanufacturer's specification and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8.62
-
-
... More
Providing and fixing 35 mm (thirty five millimetre) thick Second class deodar wood shutters panelled or panelled and glazed shutters for doors, windows and clerestory windowsfixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately complete within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
26.73
-
-
... More
Providing and fixing 35 mm (thirty five millimetre) thick second class class deodar wood Fly proof stainless steel 32 (thirty) gauge of grade 304 wire gauge with 0.5 mm diametre (zero point five millimetre) wire and 1.4 mm (one point four millimetre) wide aperture with 144 (one hundred forty four) holes per square inch with matching wood beading for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
26.73
-
-
... More
Providing and fixing Glazing with glass panes of 4mm ( four milimetre) thick plain glass weight not less than 10.00Kg/M2 (ten point zero Kilogramme per square metre) of Modiguard / Saint Gobian for shutters with putty and nails complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
25.75
-
-
... More
Providing and fixing cup board shutters 25 mm (twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked,exterior grade (Grade l Type ll), having one sidedecorative lamination and other side alancinglamination, including IInd class teak wood lipping of 25mm (twenty five millimetre) wide x12 mm (twelve millimetre) thick with necessary screws and brightfinished stainless steel piano hinges, complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
8.25
-
-
... More
Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) size aluminium Pilot/sheel sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
9
-
-
... More
Providing and fixing 250x10mm (Two hundred fifty into Ten millimetres) nominal size aluminium Pilot/sheel tower bolt (Barrel type) of required colour and shade with necessary screws etcetra bright finished or black enameled with nuts and screws etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
21
-
-
... More
Providing and fixing 150x10mm (One hundred fifty into Ten millimetres) nominal size aluminium Pilot/sheel tower bolt (Barrel type) of required colour and shade with necessary screws etcetra bright finished or black enameled with nuts and screws etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
147
-
-
... More
Providing and fixing 150mm (One hundred fifty millimetres) nominal size aluminium Pilot/sheel handles to required colour or shade with necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
22
-
-
... More
Providing and fixing 125mm (One hundred twenty five millimetres) nominal size aluminium Pilot/sheel handles to required colour or shade with necessary screws etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
100
-
-
... More
Providing and fixing bright finished brass 100mm(One hundred millimeter) Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (indian make of approved quality) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
-
-
... More
Providing and fixing aluminium hanging twin rubber floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade, with necessary screws etcetra complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
-
-
... More
Providing and fixing Aluminum oxidized PILOT/ Sheel or equivalant oxidized 250mm (Two hundred fifty millimetres) size hooks and eyes complete in all respect including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
68
-
-
... More
Providing and fixing 115mm (one hundred fifteen millimetre) bright finished brass heap and staple (safety type) with necessary screws etcetra complete in all respect including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5
-
-
... More
Providing and fixing 150mm (one hundred fifty millimetre) bright finished brass single acting spring hinges with necessary brass screws etcetra complete in all respect including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
-
-
... More
Providing and fixing 19mm (nineteen millimetre) thick terramite resistant water proof water proof commercial board box and its shelves including 19mm (nineteen millimetre) thick commercial board shutters with back side of cabinet of 8mm (eight millimetre) ply complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
24.51
-
-
... More
Providing and laying 40 mm (forty millimetre) thick cement concrete flooring 1:2:4 (one cement isto two sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat of neat cement as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.
27.08
-
-
... More
Providing and laying 600x600 mm (Six hundred into six hundred millimetres) Full Body Cotta Green Matt Finish Vitrified Tiles of Restile/ Rak / Simpolo / Kajaria / Agl / Johnson / Orient & Bell / Somany / Nitco / in flooring, treads of steps and landing as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight percentage) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetres) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogramme per square metre) including grouting the joints with white cement and matching pigments etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10.24
-
-
... More
Precast terrazo tiles 22 mm (twelve millimetre) thick with graded marble chips of size upto 12 mm (Twelve millimetre), laid in floors, and landings,jointed with neat cement slurry mixed with pigment tomatch the shade of the tiles, including rubbing andpolishing complete, on 20 mm (twenty millimetre) thick bed of cementmortar 1:4 (one cement isto four coarse sand) Medium shade pigment using 50% (fifty percent) white cement and 50% (fifty percent) ordinary cement complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
71.07
-
-
... More
Providing and laying 25mm (twenty five millimetres) thick kota stone in flooring laid over 20mm (Twenty millimetres ) (average) thickness base of cement mortar 1:4 (one cement : four sand) including proper water proofing treatment of pidilite or jointing with grey cement slurry mixed with pigment to match the shade of kota stone including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals as per approved specification drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
48.07
-
-
... More
Kota stone slab 25 mm (Twenty five millimetres) thick in risers of steps,skirting dado and pillars laid on 12 mm (Twelve millimetres) (average) thick cement mortar 1:3 (One cement isto Three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
18.61
-
-
... More
Providing and laying 300x300 mm (Three hundred into three hundred millimetres) antiskid ceremic tiles of Premium Quality of Nitco/AGL/RAK/SIMPOLO/ Kajaria/Somany / Orient Bell /Johnson tiles as per approved shade in flooring in cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
36.89
-
-
... More
Providing and laying 19 mm (Nineteen millimetres) thick Polished Granite Stone having Semi Round nosing gang saw cut, mirror polished, premoulded and pre-polished, machine cut for kitchen plat forms vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm (Twenty millimetres) (average) thickness base of cement mortar 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4.25
-
-
... More
Providing and fixing 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) diametre with prepainted limpet and rubber washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
145.11
-
-
... More
Providing and fixing factory made ridges or hips having proper gola shape 60 cm (Sixty centimetres) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted steel sheets of Tata / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty millimetres) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating fixing with prepainted iron J or L hooks, bolts & nuts 6 mm (Six millimetres) dia & prepainted G.I. limpet and bitumen washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
30
-
-
... More
Providing and fixing valley 90cm (Ninety centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20
-
-
... More
Providing and fixing flashing 38 cm (thirty eight centimetre) overall with 0.60 mm (Zero point sixty millimetres) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete as per approved drawing , design and specifications. approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
25.5
-
-
... More
Providing and fixing 150 mm (One hundred fifty millimetres) diametre on wall face PVC (D-Plast) rain water pipes of working pressure 4/6 Kg/cm2 (Four/six kilogramme per centimetre square) ISI marked of Finolex / Supreme / Prince including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
135.1
-
-
... More
Providing and fixing 150mm (One hundred fifty millimetres) dia PVC Plain bend on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogramme per centimetre square) ISI marked of Finolex / Supreme / Prince including priming coat, painting and welding etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
30
-
-
... More
Providing and fixing 150mm (One hundred fifty millimetres) dia PVC Shoe on wall face PVC rain water pipes working pressure 4/6 K.g/cm2 (Four/six kilogramme per centimetre square) ISI marked of Finolex / Supreme / Prince including priming coat, painting and welding etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
20
-
-
... More
Providing and fixing M.S. B.P. sheet 2.0mm (Two point zero millimetres) thick eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separately) including fixing complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
49.5
-
-
... More
Structural steel work of Tata / Sail / Reliance / Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5079
-
-
... More
Structural steel work of Tata / Sail / Reliance / Jindal In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works and applying a priming coat of approved steel primer all complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
461.45
-
-
... More
Providing and fixing 50mm (fifty miimetres) dia SST (Stainless steel) pipe hand rail fixed with 35mm (thirty five milimetres) dia stainless steel baluster as per detail in combination of 35mm (thirty five milimetres) dia and 15/20mm (fifteen obleque twenty milimetres) SST pipe baluster knock down railing of KICH hand rail fixed on 10x50mm (ten into fifty milimetres) S.S. flat baluster placed at 1200mm (Twelve hundred milimetres) centre to centre alongwith 3 Nos. (three numbers) at the rate of 16mm (sixteen milimetres) mild rail connected at the side of the baluster with fixtures. The baluster would be fixed on the floor, with casted base plate minimum 6mm (six milimetres) thick base plate shall be concealed with suitable S.S. 316 grade over cap railing made of hollow tubes, channels, plates etcetera, including welding, grinding, buffing, polishing and making curvature (wherevver required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolts etcetera, of required size on the top of the floow or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etcetera), as per approved drawing, design and specifications, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
200
-
-
... More
Providing and fixing hand rail 50mm ( Fifty Millimeter) dia. SST hollow pipe handrail slip resistant with round ends at two levels at 75 Cm & 90cm Ht. It should entend 30 c.m ( Thirty Centimeter) beyond the top and bottom of the ramp as per detail welded to 25 cm ( Twenty five centimeter) dia SSt hollow pipe baluster welded to 50mm ( Fifty mMillimeter) dia Pipe embadded in cement concrete 600mm ( Six hundred millimeter) C/c as per detail design PWD specifications of approved size by welding etcetera to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.
138.2
-
-
... More
Providing and applying 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement : Three sand) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
162.04
-
-
... More
Providing and applying 15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth witth cement mortar 1:6 (One cement isto Six sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
389.74
-
-
... More
Providing and applying 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
261.87
-
-
... More
Providing and applying 15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:4 (One cement isto four sand) above plinth level to floor all level complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
41.92
-
-
... More
Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on woodwork (hard and soft wood) including cleaning the surfaces of all dirt, dust and other foreign matter complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
147.34
-
-
... More
Painting wood work (including priming coat) with enamel paint of Asian paint / Dulux paint /Berger paint/ Nerolac paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre per ten square metre) of approved brand and manufacture including cleaning the surfaces of all dirt, dust and other foreign matter complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
147.34
-
-
... More
Providing and applying plaster of paris putty of 2 mm (two millimetre) thickness over plastered surface to prepare the surface even and smooth complete including cleaning the surfaces of all dirt, dust and other foreign matter complete as per specifications, drawing and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
533.62
-
-
... More
Painting with silicon & acrylic emulsion based water thinable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
261.87
-
-
... More
Wall painting (two coats) with plastic emulsion paint of Asian paint / Dulux paint /Berger paint/ Nerolac paint make on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
261.87
-
-
... More
Distempering with dry distemper of approved brand andmanufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
445.76
-
-
... More
Applying priming coat over With ready mixed red oxide zinc chromate primer of Asian paint / Dulux paint /Berger paint/ Nerolac paint over steel galvanised iron steel works including cleaning the surfaces of all dirt, dust and other foreign matter complete as per Architectural drawing, design and specification including entire carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
48.96
-
-
... More
Painting Steel work (including priming coat) with enamel paint of Nerolac / Asian to give an even shade two or more coat applied @ 0.90 ltr/10 sqm (Zero point ninety litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eighty litre per ten square metre) of approved brand and manufacture including cleaning the surfaces of all dirt, dust and other foreign matter complete as per Architectural drawing, design and specification including entire carriage of materials within all leads, lifts and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
32.73
-
-
... More
Providing plinth protection with 40 mm ( Forty millimetre) thick interlocking paver block of NTC/Atlantic with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centimetre) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate) in bedding/ haunching complete including carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
42.8
-
-
... More
Providing and fixing 1200 x 2400 mm (one thousand two hundred millimetre into two thousand four hundred millimetre) Green board / black board of Landmark / Promark. the writing to surface of thickness 0.3 to 0.4 (zero point three to zero point four millimetre). It shall have vitreour enamel coating of 0.09 mm (zero point zero nine millimetre) minmum thicjness on top and 0.3 mm (zero point three millimetre) minimum on the back, The top shall be free from waviness and shall show excellent eras ability. The core material shall be 9mm (nine millimetre) thick MDF board having bilk density of 750 kg prt cubic metre and Grade-1 as per IS 212406-203 edition 2.2. The backing material sheet shall be minimum 0.25mm (zero point two five millimetre) thick electro galvanised stee;l sheet conforming to IS 277-2003. The board shll be fixed on the wall with specially designed J Clumps & Suare clumps with the help of nylon sleves & screws as per site requirements complete with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Filling with brick aggregate in soak pit complete complete with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4.71
-
-
... More
Providing and fixing 20mm (twenty millimetre) G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
25
-
-
... More
Providing and fixing 15mm (fifteen millimetre) G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
15
-
-
... More
Providing and fixing 1216 16mm (sixteen millimetres) O.D. pipe polyethelene aluminum polyethelene PE. AL. PE composite pressure pipe confirming to I.S. 15450-2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply , capable to withstand temperature upto 80°c (Eighty degree celcius) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connections etcetra with clamp at 1.00 (One) metre spacing. This includes testing of joints complete for concealed work, including cutting chases and making good the wall etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
... More
Providing and laying 25 mm (twenty five millimetre) nominal bore in trenches, galvanised mild steel tubes (medium grade) with G.I fittings including trenching and refilling etcetra including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
25
-
-
... More
Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20 to 40mm (Twenty to forty millimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Construction of brick masonry chambers for under ground C.I. inspection chamber and bends with second class common burnt clay building bricks in cement mortar 1:5 (one cement; five sand) C.I. cover with frame (light duty) 350mm x 610mm( three hundred fifty five millimeter into six hundred ten millimeter) internal diamensions total weight of cover and frame to be not less than 38 kg. (thirty eight kilogramme) (weight of cover 23kg. (twenty three kilogramme) and weight of frame 15 kg. (fifteen kilogramme) with RCC top slab in cement concrete 1:2:4 ( one cement; two sand; four graded stone aggregate 20mm (twenty millimeter ) nominal size) foundation concrete 1:5:10 ( one cement : five sand : ten graded stone aggregate 40mm (forty millimeter) nominal size) inside plaster 15mm(fifteen millimeter) thick with cement mortar 1:3 ( 1 cement : 3 sand ) finished smooth with a floating coat of neat cement on walls and bed concrete inside dimensions 455x610x450mm( four hundred fifty five into six hundred ten into four hundred fifty millimeter) deep single pipe line complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, Toll tax and any other taxes imposed by the Government.
2
-
-
... More
Providing and fixing vitreous china wash down water closet (European type W.C. pan) of Constellation No. S. No. 20087(S-10) size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetre) with 10 (Ten) litre low level P.V.C. flushing cistern (Sleek plus) having dual flush system of Hindware/Cera/Jaguar of star white/snow white shade with fitting and brackets, 40mm (Forty millimetres) flush bend, 20mm (Twenty millimetres) over flow pipe, with seat & lid fixed with C.P. brass hinges and rubber buffers, with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and fixed with jet pressure and integral P or S trap including jointing the trap and soil pipe with adhesive of approved brand, (Jet Spray to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (five hundred thirty into four hundred ten millimetre) with integral type foot rests with 100 mm (one hundred millimetre) sand cast Iron P or S trap, 10 (ten) litre low level P.V.C. flushing cistern,of Hindware / Cera / Jaquar of star white / snow white and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
-
-
... More
Providing and fixing 8mm (Eight millimetre) diametre C.P./S.S. Jet of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal with flexible tube upto 1 (one) metre long with S.S. triangular plate to Eureopean type W.C. of approved quality complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
-
-
... More
Providing and fixing 550x400mm (Five hundred fifty into four hundred millimetres) vitreous china wash basin Delta No. 10010 without pedestal of Hindware/Cera/Jagquar with Mirror above of star white shade/snow white with single hole for pillar tap including 15 mm (Fifteen millimetre) nominal bore C.P. brass Pillar tap, 32mm (Thirty two millimetre) nominal bore C.P. brass waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings (Mirror to be measured and paid for seperately) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing vitreous china pedestal for wash basin of Hindware/Cera/Jaquar of star white/snow white shade at the back for the resption of pipe fitting in all floor level/height complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing Stainless Steel kitchen sink with drain board of Diamond/Unik/ Preyag big size 610x460x200 mm ( Six hundred ten into four hundred sixty into two hundred millimetres) including C.P. waste with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
-
-
... More
Providing and fixing Single half stall urinals with 10 (ten) litre P.V.C. automatic flushing cistern Vitreous China urinal flat Back (large) No. 60002 of size 39x37.5x59cm (thirty nine into thirty seven point five into fifty nine centimetre) with automatic flushing cistern of make Hindware/Cera / Jaquar of star white / snow white shade with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever require of snow white colour including connection with urinal and waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately) complete as per Architectural drawing ,design and specifications, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
-
-
... More
Providing and fixing 3 (three) layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. Providing and fixing PPR Unions PPR Union 32mm (thirty two millimetre) as per Architectural drawing ,design and specifications, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
-
-
... More
Providing and fixing CP Brass 32mm (thirty two millimetre) size Bottle Trap of approved quality & make and as per Architectural drawing ,design and specifications, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
-
-
... More
Providing and fixing 600x450mm (Six hundred into Four hundred fifty millimetre) nominal size bevelled edge mirror or superior glass of Modiguard/Saint Gobian mounted on 6mm (Six millimetre) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 600x20mm (Six hundred into twenty millimetres) size CP Brass towel rail of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal complete with C.P. Brass brackets fixed to wooden plugs including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI marked No. 8931 & 8934) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
-
-
... More
Providing and fixing Chromium Plated brass soap dish of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal with C.P. brass brackets fixed with wooden cleats with brass screws complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 15mm (Fifteen millimetre) diameters C.P. brass. Bib tap of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal ISI marked of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 15mm (Fifteen millimetre) diameters C.P. brass. pillar tap with Capstan head of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal ISI marked of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 15mm (Fifteen millimetre) diameters C.P. brass. stop cock of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal ISI marked of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing PTMT stop cock of approved quality and colour.Concealed stop cock, 15 mm (Fifteen millimetre) nominal bore, 108 mm (one hundred eight millimetre) long, weighing not less than 108 gms (one hundred eight Grams) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 15 mm (Fifteen millimetre) nominal bore with 30cm (thirty centimetre) length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour of Finolex/Relpipe(Reliance)/Vectuscomplete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
5
-
-
... More
Providing and fixing 32mm (Thirty two millimetres) diameters flexible P.V.C. waste pipe flexible of Finolex/Relpipe (Reliance) / Vectus for sink complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore/diametre brass full way valve with wheel of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal complete in all respect including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 20mm (Twenty millimetres) nominal bore/diametre brass full way valve with wheel of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal complete in all respect including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 25mm (Twenty five millimetres) nominal bore/diametre brass full way valve with wheel of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal complete in all respect including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore/diametre brass Valve (horizontal plunger) of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal complete in all respect including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
1
-
-
... More
Providing and placing water tank make P.V.C. Finolex/Relpipe(Reliance)/Vectus having capacity of 1000 (One thousand) liters each tank necessary fittings including over flow pipe scour pipe etcetra and pads required for inlet and outlet and inside painting ball valve with cover and locking arrangements including painting of good quality complete in all respect including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2000
-
-
... More
Providing and fixing 110mm x90mm (One hundred te millimeter into ninety millimetre) Nominal size/diameters PVC floor trap of Finolex/Relpipe(Reliance)/Vectus ISI marked including filling the joints with approved adhesive mixure complete upto all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
-
-
... More
Providing and fixing 110 mm (one hunded ten millimetre) high pressure PVC spigot and socket, waste and ventilating pipes 4.00 to 4.6mm thick (Four point zero to four point six millimetre) of Finolex/Relpipe(Reliance)/Vectus including fixing with approved adhesive etcetra including entire carriage of materials complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
... More
Providing and fixing 150 mm (one hunded fifty millimetre) high pressure PVC spigot and socket, waste and ventilating pipes 4.00 to 4.6mm thick (Four point zero to four point six millimetre) of Finolex/Relpipe(Reliance)/Vectus including fixing with approved adhesive etcetra including entire carriage of materials complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
15
-
-
... More
Providing and fixing 150mm (One hundred fifty millimetre) Nominal bore/diameters PVC Finolex/Relpipe(Reliance)/Vectus single equal branch with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
-
-
... More
Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC Finolex/Relpipe(Reliance)/Vectus door bend with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixng with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
4
-
-
... More
Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC Finolex/Relpipe(Reliance)/Vectus Collars including filling with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
... More
Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters PVC Finolex/Relpipe(Reliance)/Vectus plain bend Confirming to IS No. 14735-99 including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
... More
Providing and fixing 110mm (One hundred ten millimetre) Nominal bore/diameters P.V.C. Finolex/Relpipe(Reliance)/Vectus clamps ISI marked including finishing with approved design with steel screws and rawl plugs etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
10
-
-
... More
Providing and fixing 100mm (One hundred millimetres) C.P. iron grating of Superior quality of Continental Series of Jaquar / Classik Series of Hindware / Floral Series of Cera / Vintage Series of Kerovite / Hindon Series of Jal for gully trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
6
-
-
... More
Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
-
-
... More
Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten graded stone aggregate 40mm (Forty millimetre) all-round S.W. pipes including bed concrete as per standard design 150 mm (One hundred fifty millimetre) diametre S.W. pipe complete including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
23.2
-
-
... More
Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size bedding for 150 mm (One hundred fifty millimetre) diametre PVC pipe with necessary form work and curing complete including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. .
23.2
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm (three hundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (four point five zero kilogram) and frame to be not less than 2.70 kg as per standard design 150 x 100 mm (one hundred fifty into one hundred millimetre) size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5. complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
3
-
-
... More
Supplying and fixing cast iron cover with rectangle frame 455 x 610 mm (four hundred fifty five into six hundred ten millimetre) (light duty) single seal pattern having weight not less than 23 kg (twenty three kilogram) as per HPPWD specifications within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements