Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date20 Apr 2023
Closing Date26 Apr 2023
Tender Amount₹ 3,81,73,114
Costs
EMD
₹ 4,14,240Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Co Town Hall At Sujanpur In Distt. Hamirpur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_PWD_72342_1Bid Award Id
ViewTender No
pw/tdd/ga/nit/2022-23-471-80 DATED 17.04.2023Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Suspended floors, roofs, landings, balconies and access plat form
740.9
438835
592.3
Lintels, beams, plinth beams, girders, bressumers and cantilevers
718.09
348453
485.25
Columns, piers, abutments, pillars, posts and struts
579
363959
628.6
Stairs, (excluding landings) except spiral stair cases
2634.17
1406251
533.85
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
158.65
809416
5101.9
Providing and laying damp-proof course 40mm ( forty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 12.5mm ( twelve point five nominal size including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
142.62
45274
317.45
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 (VG-ten) of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
142.62
22626
158.65
Providing and laying reinforcement cement concrete work of grade M-20 (M-Twenty) design mix strength of 20N/mm2( Twenty Newton per millemetre square) with minimum cement content of 340.00 kg( three hundred forty kilogram) per cubic metre mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation and plinth including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
22.18
142007
6402.5
Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with minimum cement content not less than 400Kg ( four hundred kilogram) per cubic metre excluding the cost of centering, shuttering, finishing and reinforcement upto plinth level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
299.68
2209630
7373.3
Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with minimum cement content not less than 400Kg ( four hundred kilogram) per cubic metre in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
148.7
1332909
8963.75
Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size with minimum cement content not less than 400Kg ( four hundred kilogram) per cubic metre in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
76.34
660776
8655.7
Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-25 (twenty five ) grade, stone aggregate 20 mm (twenty millimetre) nominal size with minimum cement content not less than 400Kg ( four hundred kilogram) per cubic metre iin string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like etcetera above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
4.39
40734
9278.95
Smooth finishing of the exposed surface of R.C.C. work with 6 mm(six millimetre) thick cement mortar 1:3 (one Cement : three fine sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
732.65
136382
186.15
Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete work including cost of binding wire upto all floor level mild steel and medium tensile steerl bars of grade Fe-500D or more including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
79358.66
8340595
105.1
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
141.1
1203681
8530.7
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in super structure above plinth level up to all floor level in all shapes and sizes Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
134.24
1185198
8828.95
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one cement : four coarse sand) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
563.01
605235
1075
Providing and laying hard stone/brick (for stone pitching / solling ) 22.5cm (twenty two point five centimetre) thick at site including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
88.49
99073
1119.6
Providing and fixing flat pressed 3 layer (three layers) particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 25 mm(twenty five millimetre) thick including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
21.96
34909
1589.7
Providing and fixing Cup Board Shutters 25 mm ( twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board (HD HMR) IS: 12823 marked of Action TESA / Green Ply/ Kit Ply/ Century Ply make exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm ( twenty five millimetre) wide x12 mm ( twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
12.3
28802
2341.7
Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board (Action Tesa/Kitply/Century ply make ) in shelves/box for cup board with butt joints and fixing with nails and screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
40.23
69312
1722.9
Providing and fixing plywood 12 mm ( twelve millimetre) thick (Green Ply/Kit Ply/ Century Ply make) one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, including priming coat on unexposed surface with Decorative veneer facings of approved manufacture ; 12 mm commercial ply including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
21.12
21300
1008.55
Providing and fixing 1.00mm ( one millimetre) thick coloured or plain lamination sheet of Greenlam/ century ply / kit ply make on boards/ply wood sheets with approved adhesive and nails etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
21.12
21918
1037.8
Providing and fixing 2nd (Second) class teak wood lipping/ moulded beading of size 18x5 mm (eighteen into five millimetre) fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
150
15165
101.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : External member of the frame section no 14081), Internal member of the frame (Jindal section no 14008) (Styles of doors Jindal Section No. 19509, 19596, 19584, 4610) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
730.93
460266
629.7
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
2711.39
1750337
645.55
Providing and fixing 12mm (Twelve millimetre)Pre-laminated flat pressed three layer (HD HMR) particle board or graded wood particle board IS : 3087 marked, Action tesa,Century Ply ,Green ply,Kit ply make with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,of Action tesa,Black cobra,Green ply,Kit ply make in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
19.53
30759
1575
Providing and fixing Float glass panes of nominal thickness 6 mm ( six millimetre) make of Modi Float, Saint Govind, Aashai (weight not less than 10kg/sqm ( ten kilogram per square metre) of renewing glass panes with putty and nails wherever necessary including racking out the old putty including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
19.53
23710
1214.05
Providing and fixing Float glass panes of nominal thickness 5 mm (five millimetre) make of Modi Float, Saint Govind, Aashai (weight not less than 10kg/sqm ( ten kilogram per square metre) of renewing glass panes with putty and nails wherever necessary including racking out the old putty including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
55.51
54363
979.35
Providing and fixing Forested glass panes of nominal thickness 5mm (five millimetre) make of Modi Float, Saint Govind, Aashai (weight not less than 10kg/sqm ( ten kilogram per square metre) of renewing glass panes with putty and nails wherever necessary including racking out the old putty including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
6.96
8994
1292.3
Providing and fixing fly proof Stainless steel (grade 304(three hundred four)) wire gauze of 0.5 mm(zero point five millimetre) dia wire and 1.4 mm (one point four millimetre) aperture on both sides complete to windows, clerestory windows & doors with aluminium snap beading and nuts & bolts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
95.72
124737
1303.15
Providing and fixing M.S. grills of require pattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Ornamental Grill including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
136.76
30709
224.55
Providing and fixing 300x16 mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
5
1504
300.85
Providing and fixing 250x16 mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
35
9534
272.4
Providing and fixing 200x10 mm (Two hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
70
7168
102.4
Providing and fixing150x10 mm (One hundred fifty into ten millimetre) nominal size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
466
39423
84.6
Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
70
4333
61.9
Providing and fixing 100 mm (one hundred millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
248
13627
54.95
Providing and fixing 150 mm ( one hundred fifty ) bright finished floor Brass Door Stopper with rubber cushion, necessary brass screws etcetra to suit shutter thickness complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
20
4910
245.5
Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm (one hundred fifty millimetre) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
212
13133
61.95
Providing and fixing 150 mm ( one hundred fifty millimetre ) bright finished brass hasp and staple (safety type) with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
21
2595
123.6
Providing and fixing Triple strip vertical type magnetic catcher of approved quality (Hettich/Godrej) in cupboard / ward robe shutters, including fixing with necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
21
901
42.95
Providing and fixing chromium plated brass 50 mm ( fifty millimetre) cupboard or wardrobe knobs (Link/Godrej/Hettich Make) with nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
21
2898
138
Providing and fixing 40 mm ( forty millimetre) special quality bright finished Cupboard or Wardrobe locks of Link/Godrej make with four levers of approved quality including necessary screws etcetra complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
6
1904
317.35
Providing and fixing 25mm ( twenty five millimetre) dia chromium plated brass Curtain Rod with Knobs at ends having wall thickness of 1.25mm ( one point two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetra wherever necessary complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
128.1
64901
506.65
Providing and fixing aluminium die cast body tubular type Universal Hydraulic Door Closer (having brand logo with ISI, IS : 3564, embossed on the body) for door weight upto 35 kg (Thirty five kilogramme) and door width upto 700 mm (Seven hundred millimetre), with necessary accessories and screws etcetera complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
17
19505
1147.4
Providing and fixing 1.5mm ( one point five millimetre) thick coloured or plain lamination sheet of Greenlam/ century ply / kit ply make on boards/ply wood sheets with approved adhesive and nails etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
154.33
224164
1452.5
Kota stone 25mm ( twenty five millimetre) thick slab (55x55cm size) (fifty five into fifity five centimetre) flooring over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab in pattern finish with Makrana white First quality marble(100mm (hundred millimetre wide), including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
572.73
926390
1617.5
Kota stone slabs 20 mm ( twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm ( twelve millimetre) (average) thick cement mortar 1:3 ( one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs in pattern finish with Makrana white second quality marble using single slab of length upto 1.05 ( one point zero five) metre, including rubbing and polishing complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
40.56
68893
1698.55
Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(Three point three kilogramme per square metre) including grouting the joints with white and matching pigment etcetra complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
325.31
508622
1563.5
Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Full Body Charged Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of Orient bell/ Kazaria/ AGL/ RAK /Johnson & Johnson approved make, in all colours and shades,in skirting, riser of steps laid over 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required comple including grouting the joints with white cement and matching pigments etc., complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
5.69
9039
1588.75
Providing and fixing 1st quality HD series Digital Glazed rectified ceramic tiles (300mmx600 mm size) ( Three hundred into six hundred millimetre) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of Orient bell/ Kazaria/ Rak/Johnson & Johnson make , in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointings in white cement mixed with pigment of matching shade complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
327.06
425701
1301.6
Marble work gang saw cut (polished and machine cut) of thickness 18 mm ( eighteen millimetre) for wall lining (veneer work), backing filled with a grout of average 12 mm ( twelve millimetre) thick in cement mortar 1:3 (One cement : three coarse sand), including pointing with white cement mortar 1:2 (One white cement : two marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab upto 0.50 sqm ( zero point fifty square metre) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
186.21
828830
4451.05
Providing and laying 18 mm (Eighteen millimetre) thick Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye colour) in flooring, steps with three grooves (Single Slab), risers Single slab), kitchen shelves (Single slab) in required design and patterns, in linear as well as curvilinear portions of the building all complete including nozing and moulding as per the architectural drawings with over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (One cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
31.34
126040
4021.7
Providing and fixing GRC Clading of UNISTON/ NTC Stone slab 12.5mm ( twelve point five millimetre) cladding on RCC Surface as on faces of Arch Masonry wall etc on 12mm ( Twelve millimetre) thick cement plaster 1:3 ( one cement : three coarse sand) and jointed with cement slurry including scapfolding etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
409.41
1157013
2826.05
Steel work welded in built up sections using structural steel of TATA/ SAIL/ Apollo/ JSW /JAI Bharat Make in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etcetra as required in gratings, door & window frames, guard bar, ladder, railings, brackets, gates and similar works complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
32919.47
4707484
143
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (TATA/ SAIL/ Apollo/ JSW/ JAI Bharat Make ) trusses etcetera including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
183.02
25961
141.85
Providing and fixing Precoated Galvanised Iron Profile Sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percentage) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required upto all floor level/height including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
1336.22
1782651
1334.1
Providing and fixing Ridges Plain 500 - 600mm ( five hundred to six hundred millimetre) Precoated Galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
42
44100
1050
Providing and fixing Crimpt Curves Precoated Galvanised Steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percentage) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete upto all floor lvel including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
42
28280
673.35
Providing and fixing Gutter 600 mm ( six hundred millimetre) over all girth precoated galvanised steel sheet roofing accessories 0.50 mm ( zero point five zero millimetre) + 0.05 % ( zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
117.3
157780
1345.1
Providing and fixing mild steel tube hand rail of TATA/ SAIL/ Apollo/ JSW /JAI Bharat Make of approved size by welding etcetra to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer using structure steel etcetra as required complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
501.56
75635
150.8
Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/ Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
75
22170
295.6
Providing and fixing 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/ Vectus make unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement : four coarse sand) and making good the wall etcetra complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
30
9175
305.85
15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall of mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
2034.5
496824
244.2
20 mm (twenty millimetre) cement plaster of mix 1:6 ( one cement : six coarse sand) in pattren finish as per approved drawing and as per directions of Engineer-in-charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
719.19
207306
288.25
Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer ( J K White/ Birla White ) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
3452.63
361490
104.7
Distempering with Oil Bound Washable /Acrylic Distemper of approved brand and manufacture of ASIAN/NEROLAC/ICI-DULUX make to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASIAN/NEROLAC/ICI-DULUX complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
3159.55
369035
116.8
Finishing with Epoxy paint on concrete work (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, (ASAIN/NEROLAC/ICI-DULUX ) preparation of surface, etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. .
392.4
60409
153.95
Finishing walls with Acrylic Smooth Exterior Paint of ASIAN- APEX ULTIMA of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm ( at the rate of one point six seven litre per ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm ( at the rate two point two zero kilogram per ten square metre) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
293.08
42745
145.85
Applying Priming Coats with primer of approved brand and manufacture ( ASIAN/NEROLAC/ICI-DULUX), having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre ( fifty gramme per litre) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
107.01
5141
48.05
Providing and fixing mild steel Black sheet (1.66( one point sixty six) mm to 2.00 ( Two point Zero) mm thick)ornamental chhaja over standared steel section with bracket of hollow ornamental square bar of 50mm (Fifty millimetre) size including flushing with wall & chajja , over M.S.BP sheet 20(Twenty ) mm size MS square bars at the rate 5 (five) centimeter centre to centre longitudinal complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
105.57
177584
1682.15
Painting wood work with Deluxe Multi Surface Paint of required shade with Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
107.01
11685
109.2
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5cm ( twenty seven point five millimetre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm ( Eighty into one point twenty millimetre) M.S. laths with 1.20 mm ( one point twenty millimetre) thick top cover including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
128.01
396101
3094.3
Providing and fixing ball bearing for rolling shutters including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
32
14286
446.45
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
563.52
62099
110.2
Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
114.75
65671
572.3
Providing and laying 23 cm (twenty three centimetre) dia half round (to level or slopes) and joining with stiff mixture of cement mortor in the proportion of 1:1 (one cement : one sand) salt glazed stone ware pipes grade "A" including testing of pipes and joints complete.including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
127.5
130655
1024.75
WATER SUPPLY AND SANITARY INSTALLATION Providing and fixing white vitreous china full pedestal type water closet (EWC) of size 52x36x39cm (Fifty two into thirty six into thirty nine centimetre) of Hindware(slick-S-519010) with soft cloasing seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern of Hindware (Slick Smart) of size 47.6x15x30cm (Forty seven point six into fifteen into thirty centimetre) including flush pipe, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
9
55616
6179.6
Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/Parryware/Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
6
17249
2874.85
Providing and fixing white Vitreous China full pedestal (ARS-WHT-39301 of Jaquar) for wash basin completely recessed at the back for the reception of pipes and fittings of Hindware/ Jaquar / Cera make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
4
7747
1936.85
Providing and fixing P.V.C. waste semi rigid pipe for sink or wash basin including P.V.C. waste fittings complete of 32mm ( thirty two millimetre) dia of Supreme /Fenolax make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
15
1719
114.6
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete. 10 (ten) litre capacity - White including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
4
9286
2321.6
Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modigaurd/ Atul/Cera/Exotica make) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
14
18342
1310.2
Providing and fixing Stainless Steel towel rail of Jaquar (ACN-CHR-1111SM) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( six hundred millimetre) long including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
14
12134
866.75
Providing and fixing 600 mm ( six hundred millimetre) long Glass Shelf of Jaquar( ACN-CHR-1171N) supported with C.P. brass brackets and other accessories complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetra, complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
14
12401
885.8
Providing and fixing CP soap Dish Holder of Jaquar ( ACN-CHR-1131N ) with concealed fitting arrangements including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
14
6244
446.05
Providing and fixing 15mm ( fifteen millimetre) dia Short body C.P. Brass Bib Cock with wall flange of approved quality conforming to IS:8931of Jaquar ( CON-047KN) make conforming to IS standards including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
10
12204
1220.4
Providing and fixing 15mm ( fifteen millimetre) dia Long body C.P. brass bib cock with wall flange of approved quality conforming to IS:8931of Jaquar ( OPP-15037PM) make conforming to IS standards including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
1
1253
1253.7
Providing and fixing Sink Mixer of Jaquar (CON-309KNM) with Swinging Spout (Wall Mounted) With Connecting Legs and Wall Flanges including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
1
5094
5094.8
Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock of Jaquar ( CON-059 KN ) with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
84
98368
1171.05
Providing and fixing 510 x 1040mm (Five hundred into one thousand forty milimetre) bowl depth 250mm (Two hundred fifty millimetre) Stainless Steel AISI 304 (18/8) Double bowl Kitchen Sink of Diamond ( DUPLEX 5220 )/Hindware 304 Grade Steel (Glossy Finish), as per IS:13983 with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
1
5104
5104.2
Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore Cera/ Jaquar/ Finolex /Hindware Make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
28
4662
166.5
Providing and fixing 15mm (Fifteen millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
4
2521
630.45
Providing and fixing 15mm (fifteen millimetre) nominal bore brass Furrule with C.I. mouth cover including boring and taping the main of Tata/Jindal make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
2
691
345.95
Providing and fixing 20mm (twenty millimetre) nominal bore brass Furrule with C.I. mouth cover including boring and taping the main of Tata/Jindal make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
2
988
494.2
Providing and fixing 150 mm (one hundred fifty milimetre) nominal size 100mm (one hundred millimetre) diametre Chromium Plated Grating of superior quality for floor, gully or nahani trap with hinges including entire carriage of material with within all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
19
2474
130.25
Providing and fixing 8 mm (Eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 (One) metre long with S.S. triangular plate to Eureopean type W.C. of quality of ESSCO (ALE-547) and make including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
10
12804
1280.4
Providing and fixing Grab bar of stainless steel fixed to wooden plugs with C.P. brass screws 450mm ( four hundred fifty millimetre) long including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
10
15010
1501
Providing and fixing vitreous China bowl pattern urinal pot of size 355X440X535 mm ( three hundred fifty five into four hundred forty into five hundred thirty five millimetre) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately of Jaquar make.Flat back type of size 430mm x 260mm ( four hundred thirty millimetre into two hundred sixty sity millimetre) (Item Code URS-WHT-13261PN) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
6
26389
4398.3
Providing and fixing Urinal valve autoclosing system with built in control cock and wall flenge of jaquar make i/c complete fitting as per drawings and technical specifications as per the direction of Engineer-in-Charge (ITEM Code PRS 077) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
6
20571
3428.55
Providing and fixing Division plate for urinals 600mmx300mm ( six hundred millimetre into three hundred millimetre millimetre) viterious china Cera/Jaquar/ Hindware/Parryware make complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
6
11433
1905.5
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
8
94474
11809.3
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
5
107434
21486.95
Providing and fixing 75mm (seventy five millimetre) dia nominal size soil, waste and vent pipes Centrifugally Cast (spun) iron socketed pipe as per IS: 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
155
233011
1503.3
Providing and fixing 100mm (one hundred millimetre) dia nominal size soil, waste and vent pipes Centrifugally Cast (spun) iron socketed pipe as per IS: 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
150
257797
1718.65
Providing and fixing 100mm (one hundred millimetre) dia nominal size Bend of required degree of Sand cast iron S&S as per IS : 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
28
23105
825.2
Providing and fixing 75mm (seventy five) dia nominal size Bend of required degree of Sand cast iron S&S as per IS : 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
33
18900
572.75
Providing and fixing 100x100x100mm ( one hundred into one hundred into one hundred millimetre) nominal size Single Equal Plain Junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete of Sand cast iron S&S as per IS - 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
22
25822
1173.75
Providing and fixing 75x75x75mm ( seventy five into seventy five into seventy five millimetre) nominal size Single Equal Plain Junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete of Sand cast iron S&S as per IS - 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
33
27700
839.4
Providing and fixing sand cast iron (S&S) pipe as per IS: 3989 100 mm (one hundred millimetre) inlet and 75 mm (seventy five millimetre) Outlet Trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
34
43492
1279.2
Providing and fixing100mm (one hundred millimetre) dia nominal size Collar of Sand cast iron S&S as per IS - 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
24
16287
678.65
Providing and fixing75mm (seventy five) dia nominal size Collar of Sand cast iron S&S as per IS - 3989 including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government
24
14394
599.75
Providing Lead Caulked Joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of 100mm (one hundred millimetre) diameter including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
74
33181
448.4
Providing Lead Caulked Joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of 75mm (seventy five millimetre) diameter including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
90
34461
382.9
Providing and fixing 15mm (fifteen millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall of TATA make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
80
29852
373.15
Providing and fixing 20mm (twenty millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall of TATA make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
150
63262
421.75
Providing and fixing Polyethylene Aluminium pipe 15 mm dia ( fifteen millimetre) nominal bore( (Internal Fittings) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
150
32700
218
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank of Sintex make (Tripple Layers ) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
6000
74100
12.35
Providing and fixing M.S. Stays and Clamps for sand cast iron/ centrifugally cast (spun) iron pipes of 100mm (one hundred millimetre) diameter including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
18
2997
166.5
Providing and fixing M.S. Stays and Clamps for sand cast iron/ centrifugally cast (spun) iron pipes of 75mm (seventy five millimetre) diameter including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
18
2473
137.4
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
105
30891
294.2
Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to Haunches of S.W. Pipes of 100mm (one hundred millimetre) dia including bed concrete as per standard design including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
105
34608
329.6
Supplying and fixing Cast Iron Cover without frame for manhole 455x610mm(Four hundred fifty five into six hundred ten millimetre) rectangular C.I. cover (Light duty single seal pattern-I) the weight of cover to be not less than 23kgs(Twenty three kilogramme) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
2
4448
2224
Providing and fixing 80mm (Eighty millimeter) heavy duty precast cement concrete interlocking paver blocks Grey and red 50% (Fifty percent) each manufactured by the help of hydro vibratory machine having compressive strength of M-35 (M-thirty five) grade as per IS(I-15658-2006 NTC/Gico/Nitco ISI marked as approved by Engineer-In-Charge including border or kurb blocks grey or coloured. The paver shall be laid on 40mm (Forty millimeter) sand filling packed as per direction by Engineer-In-Charge including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
193
269900
1398.45
Providing and fixing 60mm (Sixty millimeter) heavy duty precast cement concrete interlocking paver blocks Grey and red 50% (Fifty percent) each manufactured by the help of hydro vibratory machine having compressive strength of M-30 (M-Thirty) grade as per IS(I-15658-2006 NTC/Gico/Nitco ISI marked as approved by Engineer-In-Charge including border or kurb blocks grey or coloured. The paver shall be laid on 40mm (Forty millimeter) sand filling packed as per direction by Engineer-In-Charge including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
116.79
130098
1113.95
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements