Public Works Department Tender

Providing and laying premix carpet using bitumens (penetration grade/ modified bitumen) Binder.Providing ,laying and rolling of Open graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregate either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, inluding mixing in a suitable plant ,laying and rolling with a three wheel 80-100 Kn static roller capacity, finished to required level and grade to be followed by seal coat of either Type A or Type B or Type C as per Technical sepecification clause 508 Case -I By Mechanical (I) Bitumens (S-90) including carriage of material, labour and equipments to site of work complete in all respect.including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.including haulage of materials with in all leads, lifts and carriage of materials and as per the directions of the Engineer-in-Charge.

Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.

Providing and Laying of Interlocking concrete block Pavements having thickness 80 mm including locking of both edgs with cement concrete 1:2:4 15 cm in width and 30 cm in thickness as per drawing and Technical Specification Clause 1504.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification Clauses 802,803,1202 and 1203.(PCC 1:4:8 ) ( One Cement : four Sand: Eight aggrigate )40mm( forty milimetre) nominal size) including all leads lifts and carriage of material as per the direction of the Engineer Incharge.