Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date11 Dec 2024
Closing Date20 Dec 2024
Tender Amount₹ 5,84,44,666
Costs
EMD
₹ 11,69,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Rajiv Gandhi Government Model Day Boarding School At Sataun, In Legistative Assembly Constituency Shillai District Sirmour H.p.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_96425_1Tender No
NIT-2024-25-8619-26 dated 04.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawing & technical specification clauses 802,803,1202 & 1203 nominal mix cement concrete 1 : 4 : 8 ( One cement : four sand : eight graded stone aggregate 25 mm nominal size ) including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge.
130
5081
660543
... More
Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:5:10 (One Cement : five coarse sand : ten graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
34.89
4569
159443.81
... More
Providing & laying cement concrete in retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapet coping, bed blocks, anchor blocks, plain window sills, fillets, Sunken floor etc., upto floor five level, excluding the cost of centring, shuttering & finishing 1 : 1.5 : 3 ( One cement : one & half coarse sand : three graded stone aggregate 20 mm nominal size ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.
7.56
8555
64682.98
... More
Making plinth protection 50 mm ( fifty milimetre ) thick of cement concrete 1 : 3 : 6 ( One cement : three coarse sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) over 75 mm ( seventy five milimetre ) thick bed of dry brick ballast 40 mm ( forty milimetre ) nominal size, well rammed & consolidated & grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
180.75
565
102177.98
... More
Providing and laying in position cement concrete of specified grade mechanically mixed , vibrated & curing complete excluding the cost of centering, shuttering, finishing & reinforcement - All work up to plinth level and all floor level in 1:1.5 : 3 (One Cement : One & half coarse sand : five graded stone aggregate 20mm (twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
186.32
7552
1407209.75
... More
Providing and laying reinforced cement concrete work in walls (any thickness), mechanically mixed, vibrated and curing complete including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level , excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
146.8
8946
1313404.92
... More
Providing and laying reinforced cement concrete work mechanically mixed & vibrated in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level mechanically mixed, vibrated and curing complete, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
660.61
9389
6203094.87
... More
Providing form work with steel plates 3.15mm ( three point fifteen millimeter ) thick welded with angle iron in frame 30X 30X5mm ( thirty X thirty X five millimeter ) so as to give a fair finish including centering ,shuttering, strutting and propping etc. with wooden battens and ballies , height of propping and centering below supporting floor to ceiling not exceeding 4.00 meters ( four meters ) and removal of the same for insitu- reinfoced concrete and plain concrete work including all leads and lifts of materials or as per the directions of Engineer in Charge. Foundations, footings, bases of columns, etc. for mass concrete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
454.11
228
103696.02
... More
Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1748.23
601
1052347.05
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1979.04
487
965276.76
... More
Columns, Pillars, Piers, Abutments, Posts and Struts Circular including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1117.56
568
634885.84
... More
Stairs, (excluding landings) except spiral stair cases including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
63.89
521
33302.66
... More
Edges of slabs and breaks in floors and walls Under 20cm ( twenty centimeter ) wide including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
446.35
128
57355.98
... More
Vertical and horizontial fins individually or forming boc louvers band, facia ane eaves boars, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
40.98
862
35349.35
... More
Providing and placing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding wire all complete upto floor all level. Thermo-Mechanically Treated bars of grade Fe-500 D or more including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
143096.75
98
14063548.59
... More
Providing & fixing sheet covering over expension joints with iron screws as per design Aluminium fluted strips 3.15 mm thick 100 mm wide,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
29.7
521
15485.58
... More
Extra for rendering smooth the top of suspended floors, landings and staircases ( treads & risers ) with cement mortar 1 : 2 ( One cement : two coarse sand ), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm ( Seven point five centimetre ) of earth laid over 15 mm ( fifteen milimetre ) of fine sand in case of suspended floors and brick laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same complete,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
104.87
118
12421.85
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in all shapes and sizes in Cement mortar 1 : 6 ( One cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
126.05
7435
937188.05
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all floor level in Cement mortar 1 : 6 (one cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
328.99
8689
2858725.71
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1 :4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
319.48
920
294065.37
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes : Cement mortar 1 : 4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1871.71
1060
1985790.72
... More
Stone/ boulder filling behind retaining wall/ under flooring, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
186.54
1449
270359.88
... More
Providing & fixing 18 mm ( eighteen milimetre ) thick gang saw cut, mirror polished, premoulded & prepolished, machine cut for kitchen plateforms,vanity counters, window sills, facias & similar locations of required size, approved shade, colour & texture laid over 20 mm ( twenty milimetre ) thick base cement mortar 1 : 4 ( One cement : four coarse sand ), joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, coulding & polishing to edges to give high glass finish etc. complete at all level Granite of any colour, shade & all area of slab including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
15.27
4130
63065.86
... More
Providing & fixing GRC stone cladding upto all heights with 30 mm ( thirty milimetre ) thick gang saw cut stone with ( machine cut edges ) of uniform colour & size upto 1.0 metre into 1.0 metre ( One metre into one metre ), fixed to structural steel frame work and / or with the help of cramps, pins etc. and sealing the joints with approved weathers sealant as per Archtectural drawing & direction of the Engineer-in-Charge ( The steel frame work, stainless steel cramps & pins etc. shall be paid for separately ) GRC stone -30 mm ( thirty milimetre ) thick gang saw cut stone,including all leads, lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge
243.79
2031
495247.2
... More
Providing & fixing structural steel frame ( for GRC stone cladding with 30 mm ( thirty milimetre ) thick gang saw cut with manhine cut edges sand stone on walls at all heights using M.S. square/rectangular tube in the required patteren as per Architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame & embedded in brick wall with cement concrete block 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate 20 mm( twenty milimetre ) nominal size ) of size 300x230x300 mm ( three hundred into two hundred thirty into three hundred milimetre ) , including cost of necessary centring & shuttering & with approved expansion hold fasteners on Cement concrete./Reinforced cement concrete. surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding,the steel work will be given a priming coat of zinc primer as approved by Engineer-in-Charge & painted with two or more coats of epoxy paint ( shop drawing shall be submitted by the contractor to the Engineer-in-Charge for approval before execution ). The frame work shall be fixed in true horizontial & vertical lines/planes. (Quantity structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately & nothing cramps shall be paid for separately & nothing materials & to the entire satisfaction of the Engineer-in-Charge
2900.52
162
469884.24
... More
Providing & fixing 12 mm ( twelve milimetre ) thick prelaminated MDF board both side phenol bonded exterior/ interior grade panelled shutters in uPVC styles of encraft/ or its equivalent for doors including bright finished/ black enamelled iron butt hinges with necessary screws ( uPVC to be measured & paid for separtely ) , including all leads, lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
111.34
2430
270650.84
... More
Providing & fixing flush door shutters interior grade, commercial type, core of black board with 25 x 25 x 5 mm ( twenty five into twenty five into five milimetre ) angle iron frame with Plain galvanised iron sheet lining from inside and well matched commercial ply veneering with vertical grains of ross bands and face veneers on both side of shutters 25 mm ( twenty five milimetre ) thick including nickel plated bright finished mild steel piano hinges, ( Angle iron frame to be measured & paid for separately ) , including all leads, lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge
15.75
2198
34632.68
... More
Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coat on unexposed surface etc. complete second class teak wood 25 x 12 mm ( twenty five into twelve milimetre )size, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
352.5
180
63573.38
... More
Providing & fixing Cub board shutters 19 mm ( nineteen milimetre ) thick with pre-laminated flat pressed three layers particle board or graded wood particle board IS: 12823 marked exterior grade ( Grade I type II ) , having one side decorative lamination & other side balancing lamination, including second class teak wood lipping of 25 mm wide 12 mm thick ( twenty five milimetre wide twelve milimetre ) thick ) with necessary screws & bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
32.13
1799
57814.72
... More
Providing & fixing decorative high pressure laminated sheet of plain/ wood grain in gloss /matt/ Suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type-S, including cost of adhesive of approved quality 1.00 mm ( One milimetre ) thick sheet, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
32.13
790
25411.62
... More
Providing & fixing 19 mm ( Nineteen milimetre ) thick water proof commercial board in shelves/box for Cub board with butt joints & fixing with nails & screws etc. complete, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
50.13
1241
62216.34
... More
Providing & fixing special quality bright finished brass cub board or ward robe locks with four levers of approved quality including necessary screws etc. complete 50 mm ( fifty milimetre ) size, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
24
286
6871.2
... More
Providing & fixing 50mm ( fifty milimetre ) bright finished brass cub board or ward robe knob of approved quality with necessary screws, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
24
63
1519.2
... More
Providing & fixing magetic catcher of approved quality in Cub board/ ward robe shutters, including fixing with necessary screws etc. complete double trip ( horizontal type ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
24
35
853.2
... More
Providing & fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand ) logo with ISI, IS:3564, embossed on the body, door weight upto 35Kg ( Thirty five kilogram ) door with upto 700mm ( seven hundred milimetre ) with necessary accessories & screws etc. complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
26
1048
27268.8
... More
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 300 x 16 mm ( three hundred into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
69
556
38395.05
... More
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 250 x 16 mm ( two hundred fifty into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
41
471
19315.1
... More
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200 x 10 mm ( two hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
46
328
15124.8
... More
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 x 10 mm ( One hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2002
243
487386.9
... More
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm ( one hundred twentyfive milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
92
149
13790.8
... More
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm ( one hundred milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
822
97
79939.5
... More
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Single rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
42
34
1430.1
... More
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Twin rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
248
63
15847.2
... More
Providing & fixing Stainless steel grills of required pattern in frames of windows etc. with stainless steel flats, square or round bars etc. complete in all respect fixed to opening /wooden /uPVC frames with rawl plugs screws etc. including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge .
4416.64
264
1166876.29
... More
Providing & fixing fly proof stainless steel grade 304 ( three hundred four ) wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm ( one point four milimetre ) in both directions with wire of dia 0.50 mm ( zero point fifty milimetre ) all complete with 2nd class teak wood beading 62 x 19 mm ( sixty two into nineteen milimetre ) size, including all leads, lifts and carriage of materials & to the entire satisfaction of the Engineer-in-Charge .
267.68
1637
438192.16
... More
Providing & fixing factory made uPVC door frames, made of uPVC exturded sections, of size 65mm x 55 mm ( Sixty five milimetre into fifty five milimetre ) with wall thickness 2.00 mm ( two point zer zero milimetre ) ( + 0.2 mm ) ( Plus/Minus zero point two milimetre ) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of size 28 mm x 30 mm ( twenty eight milimetre into thirty milimetre ) having wall thickness 2 mm ( two milimetre ) ( + 0.2 mm ) ( Plus/Minus zero point two milimetre ) , including providing & fixing 3 ( three ) Numbers of 125 mm ( One hundred twenty five milimetrre ) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification & direction of the Engineer-in-Charge, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
342.95
573
196527.5
... More
Providing & fixing factory made uPVC door frames, made of uPVC exturded sections, of size 75mm x 53 mm ( seventy five milimetre into fifty three milimetre ) having wall thickness 2.00 mm ( two point zer zero milimetre ) ( + 0.2 mm ) ( Plus/Minus zero point two milimetre ). Both verticals sides of the frame reinforced with jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with uPVC profile ofcross section size 28 mm x 30 mm x 2 mm ( twenty eight milimetre into thirty milimetre into two milimetre ) thickness ( + 0.2 mm ) ( Plus/Minus zero point two milimetre ) and 75 mm x 200 mm ( seventy five milimetre into two hundred milimetre ) long, including reinforcing both ends of the top frame with uPVC profile, uPVC door frame & uPVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing & fixing 3 Numbers of 125 mm ( One hundred twenty five milimetre ) long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification & direction of the Engineer-in-Charge, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge .
1089.35
637
694024.89
... More
Providing & fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi- chambered frame and mulion ( wherever required ) extruded profiless duly reinforced with 1.60 + 0.2 mm ( one point six plus zero point two milimetre ) thick galvanised mild steel section made from roll forming process of required length ( Shape & size according to uPVC profile ), uPVC extruded glazing beads of appropriate dimension,EPDM gasket, stainless steel ( SS 304 grade ) friction hinges,zinc alloy ( White powder coated ) casement handles ,Galvanised iron faseners 100 x 8 mm ( one hundred ito eight milimetre ) size for fixing frame to finished wall, plastic packers, plastic caps & necessary stainless steel screws etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion ( if required ) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge( Single/double glass pans and silicon sealant shall be paid separately ) ( Note :- For uPVC frame, sash & mullion extruded profiles minus 5 % ( five precent ) tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in gihher side shall be accepted but no extra payment on this account shall be made ), Casement windows single panel with S.S. friction hinges ( 300 x 19 x 1.9 mm ) ( three hundred into initeen into one point nine milimetre ) , made of ( small series ) frame 47 x 50 mm ( forty seven into fifty milimetre ) & sash 47 x 68 mm ( forty seven into sixty eight milimetre ) both having wall thickness of 1.9 + 0.2 mm ( one point nine Plus zero point two milimetre ) and single glass pans glazing bead of appropriate dimension, ( Area of window upto 0.75 ( zero point seven five ) Square metres ), including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
254.99
10177
2595275.47
... More
Providing & fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi- chambered frame and mulion ( wherever required ) extruded profiless duly reinforced with 1.60 + 0.2 mm ( one point six plus zero point two milimetre ) thick galvanised mild steel section made from roll forming process of required length ( Shape & size according to uPVC profile ), uPVC extruded glazing beads of appropriate dimension,EPDM gasket, G.I. faseners 100 x 8 mm ( one hundred into eight milimetre ) size for fixing frame to finished stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion ( if required ) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge( Single/ double glass pans and silicon sealant shall be paid separately ) ( Note :- For uPVC frame, sash & mullion extruded profiles minus 5 % tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in gihher side shall be accepted but no extra payment on this account shall be made ) Fixed windows/ Ventilators made of ( small series ) frame 47 x 50 mm ( forty seven into fifty milimetre ) & mullion 47 x 68 mm ( forty seven into sixty eight milimetre ) both having wall thickness of 1.9 + 0.2 mm ( One point nine plus/Minus zero point two milimetre ) and single glazing bead of appropriate dimension ( Area upto 0.75 ( zero point seventy five ) Square metre ), including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
235.91
6946
1638807.79
... More
Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed shutters for doors, windows & clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ), panelling for panelled or panelled & glazed shutters 25 mm to 40 mm ( twenty five milimetre to forty milimetre ) thick, Float glass panes 4.00 mm ( four point zero zero milimetre ) thick glass pans ( weight not less than 10 Kg ( ten kilograme ) per Square metres ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
254.99
1539
392531.61
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bars, ladders, railing, brackets, gates & similar work including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
6845.4
110
759565.58
... More
Providing & fixing mild steel round holding down bolts with nuts & washers plates complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
150
89
13477.5
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bars, ladders, railing, brackets, gates & similar work including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
870.54
145
126576.52
... More
Providing & fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing & similar works, including applying priming coat of approved steel primer mild steel tube/pipe, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in Charge.
404.5
162
65589.68
... More
Mirror polished Kotah stone & white slab 55 x 55 cm ( fifty five into fifty five centimetre ) slab in flooring over 20 mm ( twenty milimetre ) ( average ) thick in 70 : 30 ( seventy : thirty Ratio ) base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete with base of cement mortar 1 : 4 ( one cement : four coarse sand ) 25 mm ( twenty five milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
1241.47
1517
1883434.14
... More
Mirror polished Kotah stone & white marble slab 20 mm ( twenty milimetre ) thick in risers of steps, skirting, dado & pillars 70 : 30 ( seventy : thirty ) ratio laid on 12 mm ( twelve milimetre ) ( average ) thick cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
61.69
1626
100332.62
... More
Providing & fixing 18 mm ( eighteen milimetre ) thick gang saw cut, mirror polished Granite stone ( 80% ( eighty precent ) polished & 20 % un polished ) of approved shade ( Cheema pink graite in combination with black granite as per details given by the Architect ), machine cut in flooring, vanity counters, window sills, facias & similar locations of required size, premoulded & prepolished, laid over 20 mm thick base cement mortar 1 : 4 ( One cement : four coarse sand ),joints treated with wihte cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, coulding & polishing to edges to give high gloss finish etc. , including all leads,lifts & carriage of materials and to the entire satisfaction of Engineer-in-Charge.
479.58
4503
2159788.53
... More
Providing and laying antiskied Ceramic matte finished floor tiles of size 300x300 mm ( three hundred into three hundred milimetre ) ( thickness to be specified by the manufacturer) of Johnson tiles/ Asian/ Kajaria/ Nitco, of 1st quality conforming to IS : 15622, of approved make, in all colours, shades laid on 20 mm thick bed of cement mortar 1:4 ( 1 Cement : 4 Coarse sand ), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
356.08
888
316394.88
... More
Providing & fixing Ist quality Ceramic glazed wall tiles conforming to IS: 15622 ( thickness to be specified by the manufacture ) , of approved make in all clours, shade except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps & dados, over 12 mm ( twelve milimetre ) thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry @ 3.3 kilogramme per Square meters, including pointing in white cement mixed with pigment of matching shade complete, including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
1576.65
1012
1595569.8
... More
Cement concrete flooring 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm ( forty milimetre ) thick with 20mm ( twenty milimetre ) nominal size ) stone aggregate including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
287.52
455
130965.36
... More
Cement plaster skirting upto 30 cm ( thirty centimetre ) height, with cement mortar 1 : 3 ( One cement : three sand ) finished with a floating coat of neat cement 18 mm ( eighteen milimetre ) thick, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
12.03
483
5818.91
... More
Providing & fixing glass strips in joints of terrazo/ cement concrete floors 40 mm ( forty milimertre ) wide & 4 mm ( four milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
888
68
61005.6
... More
Providing & laying vitrified double charge antiskied floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 ( One cement : four coarse sand ), jointing with grey cement slurry @ 3.3 Kg ( three point three Kilogram ) per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm ( six hundred into six hundred milimetre ) , including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
148.17
1754
259905
... More
Providing & laying vitrified double charge tiles in different sizes ( thickness to be specified by manufacturer ) , with water absorption less than 0.08 % & conforming to IS 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ), jointing with grey cement slurry @ 3.3 Kg ( Three point three Kilogram ) per square metres including grouting the joint with white cement & matching pigments etc. complete size of tile 600 x 600 mm ( six hundred into six hundred milimetre ) , including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
9.28
1866
17318.34
... More
Providing & fixing 1.8 mm ( One point eight milimtre ) thick PVC Anti Bacterial antistatic venyl flooring plain or coloured,carbed or mosaic/ metalled finish laid with approved adhesive on Sub-floor ( damp proofing tratment to be paid for separately ),including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
252.22
1092
275512.52
... More
Stone work ( machine cut edge ) for wall lining etc. ( Veneer work ) upto all height, backing filled with a grout of average 12 mm thick cement mortar 1 : 3 ( One cement : three coarse sand ) including pointing in white cement mortar 1 : 2 ( One white cement : two stone dust ) with an admixture of pigment matching the stone shade : ( To be secured to the backing & the sides by means of cramps & pins which shall be paid for separately ) Gang saw cut stone 30 mm thick Red sand stone, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
50.82
1987
100986.96
... More
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 110mm ( One hundred ten millimeter ) diameter metre.
186.3
450
83890.89
... More
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 110mm ( eighty seven point five degree one hundred ten millimeter ) bend.
36
177
6402.6
... More
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Shoe ( Plain )110mm ( One hundred ten millimeter ) shoe.
36
142
5121
... More
Providing & fixing mild steel holder bat clamps of approved design to cast iron or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix ( One cement : two coarse sand : four graded stone aggregate 20 mm nominal size ) & cost of cutting holes & making good the wall etc. 110 mm ( One hundred ten milmetre ) diameter PVC pipe including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
72
248
17892
... More
Providing & fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from mild steel sheets & galvanised with zinc coating of 120 ( one hundred twenty ) gramme per square metre ( both side inclusive ) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6mm ( twenty five milimeter into one point six milimetre ) thick with flanges of 27 mm and 37 mm, at 1200 mm ( twenty seven milimetre, thirty seven milimetre , at 0ne thousnd two hundred milimetre ) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm ( Twelve point five milimetre dia into fifty milimetre ) long with 6 mm ( six milimetre ) dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x 0.50 mm( twenty five into ten into zero point five zero milimetre ) of required length with nuts & bolts of required size & other end of angle hanger fixed with intermediate galvanised iron channels 45x15x0.90mm ( forty five into fifteen into zero point nine zero milimetre ) running at the spacing of 1200mm ( One thousand two hundred milimetre ) centre to centre, to which the ceiling section 0.5 mm ( zero point five milimere ) thick bottom wedge of 80 mm ( eighty milimetre ) with tapered flanges of 26 mm ( twenty six milimetre ) each having lips of 10.5 mm, at 450mm ( ten point five milimetre, at four hundred fifty milimetre ) centre to centre, shall be fixed in a direction perpendicular to galvanised iron intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm ( two point six four milimetre dia into two hundred thirty milimetre ) long galvanised iron wire at every junction, including fixing perimeter channel 0.5mm ( zero point five milimetre ) thick 27mm ( twenty seven milimetre ) high having flanges of 20 mm and 30 mm ( twenty milimetre & thirty milimetre ) long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm ( twenty five milimetre ) long dry wall screws @ 230 mm ( at the two hundred thirty milimetre ) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm ( three point five into twenty five milimetre at two hundred thirty milimetre ) centre to centre, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes finishing with jointing compound in three layers covering upto 150 mm ( one hundred fifty milimetre ) on both sides of joint & two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawing, specification & direction of the Engineer-in-Charge but excluding the cost of painting with ACP Sheets of approved shade 60 x 60 cm ( sixty into sixty milimetre ) board of approved quality ,including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
31.95
2208
70555.19
... More
Providing & fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from mild steel sheets & galvanised with zinc coating of 120 ( one hundred twenty ) gramme per square metre ( both side inclusive ) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6mm ( twenty five milimeter into one point six milimetre ) thick with flanges of 27 mm and 37 mm, at 1200 mm ( twenty seven milimetre, thirty seven milimetre , at 0ne thousnd two hundred milimetre ) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm ( Twelve point five milimetre dia into fifty milimetre ) long with 6 mm ( six milimetre ) dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x 0.50 mm( twenty five into ten into zero point five zero milimetre ) of required length with nuts & bolts of required size & other end of angle hanger fixed with intermediate galvanised iron channels 45x15x0.90mm ( forty five into fifteen into zero point nine zero milimetre ) running at the spacing of 1200mm ( One thousand two hundred milimetre ) centre to centre, to which the ceiling section 0.5 mm ( zero point five milimere ) thick bottom wedge of 80 mm ( eighty milimetre ) with tapered flanges of 26 mm ( twenty six milimetre ) each having lips of 10.5 mm, at 450mm ( ten point five milimetre, at four hundred fifty milimetre ) centre to centre, shall be fixed in a direction perpendicular to galvanised iron intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm ( two point six four milimetre dia into two hundred thirty milimetre ) long galvanised iron wire at every junction, including fixing perimeter channel 0.5mm ( zero point five milimetre ) thick 27mm ( twenty seven milimetre ) high having flanges of 20 mm and 30 mm ( twenty milimetre & thirty milimetre ) long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm ( twenty five milimetre ) long dry wall screws @ 230 mm ( at the two hundred thirty milimetre ) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm ( three point five into twenty five milimetre at two hundred thirty milimetre ) centre to centre, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes finishing with jointing compound in three layers covering upto 150 mm ( one hundred fifty milimetre ) on both sides of joint & two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawing, specification & direction of the Engineer-in-Charge but excluding the cost of painting with GRG tiles of approved shade 60 x 60 cm ( sixty into sixty milimetre ) board of approved quality ,including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
256.21
1722
441411.4
... More
Providing and laying water proof treatment with Dr. Fixit-FASTFLEX or equivalent with two component polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats. For Ist coat:- Clean and saturate surface and then applying a coat of Dr. Fixit- FASTFLEX by maintening a coverage of 6-7 ( six to seven ) square feet per Kg to achieve one mm thickness and the same process shall be extended upto 300mm vertically. The Second coat shall be applied in oppisit direction after four-six courses of application of Ist coat, then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar of cement : sand ( 1 : 4 ) ( One cement : four coarse sand ) admixed with 200ml ( two hundred mililitre ) of pidiproof LW 200ml ( two hundred mililitre ) per 50 (fifty ) kilogram of cement over the floor with the suitable gradient toward drain pipe, while the second coat of Dr. Fixit id still tacky. including all leads, lifts & carriage of materials & entire satisfaction of the Engineer-in-Charge.
188.77
813
153649.34
... More
Providing & fixing 0.60 mm ( sixty milimetre ) thick prepainted steel sheet of TATA Dora shinein roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting to back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia metre with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
228.18
1424
325065.23
... More
Providing & fixing ridge or hips 0.45 cm ( forty five centimetre ) over all with thick prepainted steel sheet of TATA Dora Shine in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting plus back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia and prepainted G.I. limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
26.5
779
20654.1
... More
Providing & fixing valley 60cm overall 0.40 mm ( forty milimetre ) thick prepainted steel sheet of Tata Dora Shine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia with prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
19
933
17731.75
... More
Providing & fixing 30 cm ( thirty centimetre ) wide 120 cm ( one hundred twenty centimetre ) overall Box type prepainted Zinc coated sheet gutter with iron bracket 40 x 3 mm ( forty into three milimetre ) size, bolts & nuts and washers etc. including making necessary connections with rain water pipes complete as per design. 0.45 mm ( forty five milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
65.4
960
62806.89
... More
Providing flat iron bracket 50 x 3 mm ( Fifty into three milimetre ) size with necessary bolts, nuts & washers etc. for fixing galvanised steel sheets gutters with purlins including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
97.5
83
8141.25
... More
Providing & fixing mild steel B.P. sheet 1.66 mm to 2 mm ( One point six six milimetre to two milimetre ) thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing & welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge ( Base member of steel work shall be measured & paid for separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
78.48
1986
155920.14
... More
Providing & fixing fiber cement designer Jali or G.R.C. Jali /C.N.C. W.P.C jali with Mild steel frame work of 50x50mm ( fifty into fity milimeter ) size as per detail & Architectural drawing complete,including preparation of ground, including carriage of all labour, equipments & materials to various locations through all leads, lifts and other incidential charges complete as per the entire satisfaction of Engineer-in-Charge
18.45
1253
23124.31
... More
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:4 ( one cement : four fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
79.65
282
22485.2
... More
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:6 ( one cement : six fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
7010.79
259
1816495.69
... More
6mm ( six millimeter ) cement plaster of mix 1:4 (one cement : four fine sand) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1723.9
202
348744.97
... More
Providing & applying plaster of paris putty of 2 mm ( two milimetre ) thickness over plastered surface to prepare the surface even & smooth complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
6707.59
95
642251.74
... More
Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
4282.58
116
500847.73
... More
Finishing walls with 100 % ( One hundred percent ) premium acrylic emulsion paint having VOC less than 50 ( fifty ) gram per litre UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tined ) with silicon additives new work ( Two or more coats applied @ 1.43 ( One point four three ) Litre per 10 ( ten ) square metres over & including priming coat of exterior primer applied @ 0.90 ( Ninety ) litre per 10 ( ten ) Square metres, including all leads, ,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge .
333.75
132
44155.13
... More
Finishing walls with Acrylic smooth exterior paint with of required shade new work ( two or more coat ) applied @ 1.67 litre/10 Sqmt ( one point six seven litre per ten square metres ) over & including priming coat of exterior primer applied @ 2.20 Kg /10 Sqmt ( at the rate two point two zero kilograme per ten square metre ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2039.01
137
281077.53
... More
Finishing with Deluxe Multi surface paint system for interior & exterior using primer as per manufactures specifications , Two or more coats applied on walls @ 1.25 ( One point twenty five ) litre per 10 ( ten ) square metres over & including one coat of special primer applied @ 0.75( Zero point seven five ) litre per 10 ( ten ) Square metres, including all leads, ,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
1327.79
122
162787.05
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint of requied shade. Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.80 ltr/ 10sqm( zero point eight zero litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
150
107
16117.5
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of requied shade. Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.75 ltr/ 10sqm( zero point seventy five litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
100
111
11115
... More
Providing & fixing 19 x 75 mm ( nineteen into seventy five milimetre ) finished size of first class Rai Tosh wood panelling with 8 mm ( eight milimetre ) thick groove to be polished in natural teak wood shade complete with necessary fixing arrangement and screws etc. complete including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
172.48
1237
213469.87
... More
Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coaat on unexposed surface etc. complete Second class teak wood 55 x 30 mm,( fifty five into thirty milimetre ) including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
131.49
187
24687.25
... More
Polishing on wood work with ready mixed wax polish of approved brand and manufacture new work, including all leads, ,lifts, carriage of materials & to the entire satisfaction of the Engineerr-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
172.48
169
29218.11
... More
Providing and fixing 12 mm (twalve milimeter) thick green chalk board ( Non magnetic) with superior quality framing specially anodized aluminium profile 20 x 15 mm ( twenty into fifteen milimeter ) with corner of black surface shall be non porous ceramic particals on the top green surfaces for smooth writting with chalk over 11 mm ( eleven milimeter ) thick partical board which shall have backing materials of galvinised sheet 0.28 mm ( zero point twenty eight milimeter) thick approx. The board shall be fixed on the wall with specially designed J clump and square clump with the help nylon sleves and screws as per the site requirement complete in all respect as per drawing .including carriage of all labour equipments & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
22.68
2475
56134.13
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm ( one hundred millimeter ) sand cast Iron P or S trap, 10 litre ( ten litre ) low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge: White Vitreous china Orissa pattern W.C. pan of size 580mm x 440mm ( five hundred eighty millimetre X four hundred forty millimeter ) with integral type foot rests.
6
4078
24468.9
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre ( ten litre )low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), Universal pan No. 2061 size 570 x 460 mm( five hundred seventy into four hundred sixty milimetre ) , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required . W.C. Pan with ISI marked white solid seat & Lid, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- W.C. pan with ISI marked white solid plastic seat and lid.
15
4540
68107.5
... More
Providing & fixing white Vitreous China flat back half stall urinal of size 580 x 380 x 350 mm ( Five hundred eighty into three hundrded eighty into three hundred fifty milimetre ) with white PVC auotmatic flusing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with union & clamps ( all in C.P. brass ) with waste fitting as per large No. 5001 & 2851,C.I. trap with out let grating & other couplings in C.P. brass, including painting of fittings & cutting & making good the walls & floors wherever required Range of two half stall Urinals with 5 litre P.V.C. automatic flushing cistern, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
20
6170
123402
... More
Providing and fixing wash basin with C.I. brackets, 15mm ( fifteen millimeter ) C.P. brass pillar taps, 32mm ( thirty two millimeter ) C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550 x 400 mm ( Five hundred fifty into four hundred milimetre ) complete with single 15 mm ( fifteen milimetre ) C.P. Brass pillar tap, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
23
3142
72279.8
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
3
1138
3414.3
... More
Providing & fixing stainless steel A ISI 304 ( 18/8 ) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm ( forty milimetre ) including painting of fittings & brackets, cutting & making good the walls wherever required kitchen sink without drain board 535 x 455 mm ( Five hundred thirty five into four hundred fifty five milimetre ) bowl depth 200 mm, ( Two hundred milimetre ) including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
4
3222
12888.4
... More
Providing and fixing 600mm x 450mm ( Six hundred millimeter into four hundred fifty millimeter ) beveled edge mirror of superior glass (of approved quality) complete with 6mm ( six milimetre ) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
23
1020
23468.05
... More
Providing and fixing 600mm x 120mm x 5mm ( Six hundred millimeter into one hundred twenty millimeter into five millimeter ) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm ( forty millimeter ) long screws, rawl plugs etc., complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
23
697
16049.4
... More
Providing and fixing Toilet paper holder C.P. brass, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
15
587
8806.5
... More
Providing & fixing 8 mm ( eight milimetre ) dia C.P./S.S. Jet with flexible tube upto 1.00 ( One ) metre long with S.S.triangular plate to Eureopean type W.C. of quality & make as approved by Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
15
284
4268.25
... More
Providing & fixing grab bars 600mm x 40mm ( six hundred milimetre into forty milimetre ) in handicapped toilets two number each Chromium plated 40mm ( forty milimetre ) dia steel pipe at 78cm ( seventy eight centimetre ) height with mild steel plates as per detail at the position of the seat & wash basin, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
3
2454
7362.15
... More
Providing and fixing PTMT liquid soap container 109mm ( one hundred nine millimeter ) wide, 125mm( one hundred twenty five millimeter ) high and 112mm( one hundred twelve millimeter ) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms ( one hundred five grams ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
23
263
6053.6
... More
Providuing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour, 450 mm ( Four hundred fifty milimetre ) long towel rail with total length of 495 mm, 78 mm ( Four hundred ninety five milimeter, seventy eight milimetre ) wide & effective height of 88 mm ( eighty eight milimetre ) , weighting not less than 170 ( One hundred seventy ) grams, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
23
525
12079.6
... More
Constructing masonry Chamber 30 x 30 x 50 cm ( thirty into thirty into fifty centimetre ) in side, in brick work in cement mortar 1 : 4 ( One cement : four coarse sand ) for stop cock, with cast iron surface box 100 x 100 x 75 mm ( One hundred into one hundred into seventy five milimetre ) ( inside ) with hinged cover fixed in cement concrete slab 1 : 2 : 4 mix ( one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty milimetre ) nominal size ), including necessary excavation, foundation concrete 1 : 5 : 10 ( one cement : five coarse sand : ten graded stone aggregate 40 mm ( forty milimetre ) nominal size ) and inside plastering with cement mortar 1 : 3 ( One cement : three coarse sand ) 12mm ( twelve milimetre ) thick, finished with a floating coat of neat cement complete as per standard design, with common burnt clay F.P.S. ( Non modular ) bricks of class designation 7.5,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
5
2148
10741
... More
Providing & fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete,including carriage of materials in all leads and lifts and as directed by the Engineer-in-Charge.
23
263
6053.6
... More
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 1216 (16 mm ( sixteen millimeter ) OD) pipe.
273
415
113376.9
... More
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:-1620 (20mm ( twenty millimeter ) OD) pipe.
75
458
34417.5
... More
Providing and fixing G.I. pipes complete with G.I. fittings & Clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work:-15mm ( fifteen millimeter ) dia nominal bore.
60
441
26508
... More
Providing and fixing G.I. pipes complete with G.I. fittings including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work :- 20mm ( twenty millimetre ) dia.
90
513
46188
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.External work:-15mm ( fifteen millimeter ) dia nominal bore.
150
256
38422.5
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 25 mm to 40mm ( twenty five millimeter to forty millimeter ) nominal bore.
1
648
648.9
... More
Fixing water meter & stop cock in G.I. pipe line including cutting & threading the pipe & making long screws etc. complete ( Cost of water meter & stop cock to be paid separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
1
563
563.55
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
8000
9
76400
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
84
675
56763
... More
Providing and fixing C.P. brass stop cock ( Concealed ) of standard design & of approved make conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
63
839
52879.05
... More
Providing and fixing C.P. brass angle valve for basin mixer & geyser point of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
75
761
57082.5
... More
Providing & fixing C.P. brass extension nipple ( Size 15 mm x 50 mm ) of approved make and quality as per direction of Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in Charge.
32
120
3868.8
... More
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20mm ( twenty millimeter ) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40mm ( forty millimeter ) nominal size), inside plastering 12mm ( twelve millimeter ) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimeter ) nominal size) finished with a floating coat of neat cement complete as per standard design complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. : Inside size 90cm x 80cm and 45cm ( Ninety centimeter into eighty centimeter and forty five centimeter ) deep including C.I. cover with frame (medium duty) 455 x 610 mm ( Four hundred fifty five into Six hundred ten millimeter ) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram ) (weight of cover 23 kg ( twenty three kilogram ) and weight of frame 15 kg( fifteen kilogram ) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50.
5
11489
57446.75
... More
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150mm dia ( One hundred fifty milimetre ) including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
75
509
38246.25
... More
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 100 mm ( One hundred milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
60
374
22461
... More
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
45
274
12336.75
... More
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 150 mm ( one hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
263
6580
... More
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 100 mm ( one hundred milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
234
4695
... More
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
206
3094.5
... More
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
30
138
4140
... More
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 100 mm ( One hundred milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
116
2916.25
... More
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
95
1429.5
... More
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
130
2618
... More
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
109
1643.25
... More
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
95
953
... More
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
415
8308
... More
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
315
4737.75
... More
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
258
2589
... More
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
635
12718
... More
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
493
7404.75
... More
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
401
4012
... More
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
109
2191
... More
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
88
1323
... More
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
74
740
... More
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 150 mm x 110 mm ( One hundred fifty milimetre into one hundred ten milimetre ) dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
156
2347.5
... More
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ) dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
135
2027.25
... More
Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 90 mm ( One hundred ten milimetre into ninety milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
1048
15731.25
... More
Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
1018
15273
... More
Providing & fixing 15 mm ( fifteen milimetre ) mixer for kitchen sink with top/ bottom swining spouts, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
3
2418
7255.5
... More
Cutting holes to 30 x 30 cm in walls including making good the same with common burnt clay F.P.S. ( Non modular ) bricks, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
90
314
28264.5
... More
Cutting holes to 15 x 15 cm ( fifteen into fifteen centimetre ) in R.C.C. floors and roofs for passing drain pipes including making good the same with cement concrete 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate 20 mm ( twenty milimetre ) nominal size ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
25
172
4316.25
... More
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) rectangular shape 600 x 450 mm ( six hundred into four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
4
1296
5186.8
... More
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) square shape 450 mm ( four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
12
1104
13249.2
... More
Supplying & filling brick bats in dispension trenches ( Brick aggregate ( Single size ) 50 mm ( Fifty milimetre ) nominal size ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
5.57
718
4001.77
... More
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 75 mm ( Seventy five millimeter ) diameter metre.
35.1
289
10171.98
... More
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 75 mm ( eighty seven point five degree Seventy five millimeter ) bend.
2
156
313
... More
Providing weep holes in brick/ stone masonry, plain/ reinforced concrete abutment, wing wall return walls with 100 mm ( One hundred milimetre ) dia PVC pipe extended through the full width of the structure with slope of 1 (V) : 20 (H) towards drawing face complete as per drawing & technical specification clause 614,709,1204, 3.7 including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-Charge.
124
248
30814
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements