Public Works Department Tender

Providing and laying bituminous concrete using crushed stone aggregates of specified grading 25mm ( Twenty five millimetre) compacted thickness with bituminous binder VG-30 ( Viscosty grade- thirty) @ 5.50% ( Five five zero percent of total mix weight) and lime filler 2% ( percentage weight of aggregate ) and waste plastic additive @ 8% ( percentage by weight of bitumen) with minium 100-120 TPH capacity ( Hundred- one hundred twenty tonne per hour) hot mix batch type/ drum type plant with electonic control, transported to site, laid with censor paver finisher hydraulic with censor control to the required grade , level and alignment over a previously prepared surface and rolling complete with smooth wheeled roller 8-10 ( Eight-ten) tonne capacity for initial break down rolling and vibratory roller 8-10 ( Eight - ten ) tonne capacity or penumatic typr roller of 12-15 ( Tweleve- fifteen tonne) with tyre pressure of at least 0.56 mpa ( Zero point five six) for intermediate rolling and finish rolling with 6-8 ( six- eight) tonne smooth wheeled tandom roller to achive the desired compaction as specification 2019 complete as per the direction of Engineer-in-charge including carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying of hot applied thermoplastic compound 2.5 mm (two point five millimetre) thick including reflectorisingh glass beads @ 250 gms (at the rate of two hundred fifty gram per square metre) per sqm area,thickness of 2.5 mm (two point five millimetre0is exclusive of surface applied glass beads as per IRC:35 . The finished surface to be level, uniform and free from streaks and holes. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing cat eye make) (3M) of size 100x20mm made of heavy duty body shall be molded dual shank ASA /Acyclic styrene acyloretrite ) or HP/High impact polystyrene) ort ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The road stud shall support a load of 13635 by tested in accordance with ASTM D4280.The slope of retro reflective surface shall be 35+/-5 degrees to base. The rate includes sale tax octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.