Public Works Department Tender

Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings bases of column complete as per drawings and MORD technical specification, including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges

Providing and laying 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth level complete as per the direction of Engineer-In-Charge, including carriage of all labour equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work and 6mm thick MS checquered plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer in trusses and trussed purlin all complete as per the direction of Engineer-in-charge, including carriage of all labour, equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) Hot finished welded type tubes trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. complete as per the direction of Engineer-in-charge, including carriage of all labour, equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type- III of ASTM-D 4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive by applying pressure conforming to class II of ASTM-D 4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in- charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment, complete as per the direction of Engineer-in-charge, including carriage of all labour, equipment and materials to various location of site through all modes of transportations in all leads lifts and all incidental charges.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture complete as per the direction of Engineer-in-Charge.and as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.