Public Works Department Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date28 Jan 2025
Closing Date4 Feb 2025
Tender Amount₹ 81,79,263
Costs
EMD
₹ 1,63,600Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
Construction Of Type-iv Residential Building For Dy. Sp Vigilance Kullu Distt. Kullu (hp.)(sh C/o Building Portion Ws And Si, Rain Water Harvesting System, Septic Tank And Site Development
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_98810_1Bid Award Id
ViewTender No
PW/KD/TA/2024-25-13541-50 Dated 24.01.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
(iii) Columns, Pillars, Piers, Abutments, Posts and Struts.
128.94
576
-
... More
(iv) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
192.97
451
-
... More
(v) Edges of slabs and breaks in floors and walls under 20cm (twenty centimetre) wide .
137.57
221
-
... More
(vi) Stairs, (excluding landings) except spiral stair cases.
22.78
713
-
... More
(vii) Walls any thickness .
35.68
470
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (one cement :five coarse sand: ten graded stone aggregate) 40 mm (fourty millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
27.36
4824
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (one cement : four coarse sand: eight graded stone aggregate) 40 mm (fourty millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
8.07
5134
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (one Cement : three coarse sand : six graded stone aggregate) 20 mm (twenty millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
1.51
5576
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 ( M-Twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
30.4
7167
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 ( M-Twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works above plinth level All level including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
55.2
8203
-
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with (one cement : one point five coarse sand : three graded stone aggregate) 20 mm (twenty millimetre) nominal size). including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
1.46
12232
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.(i) Thermo-Mechanically Treated bars of grade Fe-500D or more.
12946.01
79
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (one cement : four coarse sand) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
46.48
8839
-
... More
Providing and fixing up to any level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (one cement : three coarse sand), cost of required centering, shuttering complete. 1:1½:3 (one Cement: one and half coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size) . with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
9.59
9269
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm (twenty millimetre) nominal size) upto plinth level with : Cement mortar 1:6 (one cement : six coarse sand) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
23.78
4764
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm (five centimeter to twenty centimeter), in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
77.96
1256
-
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero with tolerence of plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality including fastners, window shutter double glass panes 6mm(six millimetre) thick, wire mesh/bug mesh, sliding door bolt/lock handle, handles, tower bolt, hooks & eyes of approved size and silicon sealant all complete as per approved drawing & direction with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
48.39
13497
-
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero with tolerence of plus minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality including fastners, door shutter, double glass panes 6mm( six millimetre) thick in fixed glaze door, wire mesh/bug mesh, sliding door bolt/lock handle, handles, tower bolt, hooks & eyes of approved size and silicon sealant all complete all complete as per approved drawing & direction with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
24.29
12122
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.(i)Fixed to openings /wooden frames with rawl plugs screws etc. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
241.96
167
-
... More
Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm (two millimetre) thick of approved brand (fittings to be paid separately). Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm (eighteen millimetre) thick confirming to IS:14587. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
50.76
1395
-
... More
Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm (two millimetre) thick of approved brand (fittings to be paid separately). Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm (eighteen millimetre) thick confirming to IS:14587. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
13.23
1824
-
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
96
55
-
... More
Providing and fixing bright /matt finished Stainless Steel handles 125 mm (One hundred twenty five millimetre) of approved quality & make with necessary screws etc all complete. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
48
137
-
... More
Providing and fixing ISI marked C.P. soft closing hinges with nuts and screws etc. complete : 150 mm (One hundred fifty five millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
96
218
-
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50 mm (fifty five millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
12
260
-
... More
Providing and fixing G.R.C. (Unistone) 12mm.(twelve millimetre) With deep recessed square cut (1cm x 1cm)(one centimetre into one centimetr) cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm.(twelve millimetre) thick cement plaster 1:3(one cement:three sand) jointed withthe range of chemical adhesive plaster and i/c scaffolding etc. complete with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
41.72
2488
-
... More
Providing and laying full body vitrified floor tiles of thickness 10mm(ten millimetre) with water absorption less than 0.08% (zero point zero eight percet) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm(twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.30 kg/sqm(at the rate three point three zero kilogram per squaremetre) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600 x 600 mm(six hundred into six hundred millimetre) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
69.5
1209
-
... More
Providing and laying full body vitrified tiles of thickness 10mm(ten millimetre) with water absorption less than 0.08% (zero point zero eight percet)and conforming to IS: 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm(twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm(at the rate three point three zero kilogram per squaremetre) including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm(six hundred into six hundred millimetre) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
5.38
1235
-
... More
Providing and fixing 18(eighteen millimetre) mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm(twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade area of any slab size with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
3.89
4156
-
... More
Providing and laying exterior grade vitrified floor tiles of thickness 10mm(ten millimetre) with water absorption less than 0.08% (zero point zero eight percet) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm(twenty millimetre)thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm(at the rate three point three zero kilogram per squaremetre) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600 x 600 mm(six hundred into six hundred millimetre) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
20
1362
-
... More
Providing and laying exterior grade vitrified vitrified tiles of thickness 10mm(ten millimetre) with water absorption less than 0.08%(zero point zero eight percet) and conforming to IS: 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm(twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm(at the rate three point three zero kilogram per squaremetre) including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm(six hundred into six hundred millimetre) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
8.03
1388
-
... More
Providing and fixing anti-skid 1st quality matt finshed ceramic glazed floor tiles with antiskid pattern conforming to IS : 15622 10mm(ten millimetre) thick of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.30kg per sqm(at the rate three point three zero kilogram per squaremetre) including pointing in white cement mixed with pigment of matching shade complete. Size 30x30 cm(thirty into thirty centimetre) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
17.26
1133
-
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.30kg per sqm(at the rate three point three zero kilogram per squaremetre) including pointing in white cement mixed with pigment of matching shade complete with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
72.44
1082
-
... More
Providing and laying full body vitrified floor tiles of size single piece of thickness 10mm(ten millimetre) with water absorption less than 0.08% (zero point zero eight percet) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm(twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm(at the rate three point three zero kilogram per squaremetre) including grouting the joints with white cement and matching pigments etc., complete with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
10.8
1260
-
... More
Providing and laying full body vitrified tiles of size single piece of thickness 10mm(ten millimetre) with water absorption less than 0.08%(zero point zero eight percet) and conforming to IS: 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm(twelve millimetre) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm(at the rate three point three zero kilogram per squaremetre) including grouting the joint with white cement & matching pigments etc. complete with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
2.74
1286
-
... More
Providing and fixing 8mm thick WI-parquet/ Action TESA or equivalent (Clip -in-prelaminated ) wooden flooring (HDF) over CC base with polythene sheet and theromo sheet cushion below etc. complete. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
44.66
2073
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4(one cement : two coarse sand : four graded stone aggregate) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
44.66
416
-
... More
Providing and fixing 8mm thick WI-parquet/ Action TESA or equivalent (Clip -in-prelaminated ) wooden skirting, dado etc. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
4.27
1887
-
... More
Providing and fixing pre painted troughed profile colour coated 0.60 mm (zero point sixty millimetre) thick high tensile steel ZINSALUME ( Zinc-Aluminium alloy coating sheet) roofing with trapezodal corrugation of maximuim pitch 190 c/c and minimum depth of 30mm (thirty millimetre) with return leg & sealent grove for proper side overlap single sheet to be provided upto 10 m (ten metre) drom ridge to eaves for providing overlap with fixing of sheets with self drilling and self tapping galvanized or zinc alloy coated fasteners of size 5.5mm (five point five) (dia.) abd 55mm (fifty five millimetre) (length) with EPDm seal test certifiacte and over twenty year warranty against colour fading with other necessary fitting of steel sheet roof including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
167.97
1323
-
... More
Providing ridges or hips of width 60 cm (sixty centimetre) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.60 mm (one point sixty millimetre) thick with zinc coating not less than 350 gm/m² including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
41.3
704
-
... More
Providing and fixing valley 90 cm (ninety centimetre) overall 0.60mm (zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (sixty millimetre) dia with prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
5.1
1248
-
... More
Providing and fixing of 40 cm (forty centimetre) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand). 1.00 mm (one millimetre) thick with zinc coating not less than 275 gm/m² (two hundred seventy five gram per metre square centimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
19.25
960
-
... More
Providing and fixing 15 cm (fifteen centimetre) wide, 45 cm (fourty five centimetre) overall semi- circular plain G.S. sheet gutter with iron brackets 40x3mm (fourty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.80 mm (zero point eighty millimetre) thick with zinc coating not less than 275 gm/m2 (two hundred seventy five gram per sqaure metre) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
49.91
684
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion, (i) Single socketed pipes. 110 mm(one hundred ten millimetre) diameter including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
51.2
407
-
... More
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.(i)110 mm bend (one hundred ten millimetre)
16
315
-
... More
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge (ii)110 mm Shoe (one hundred ten millimetre)
8
225
-
... More
Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
79.25
1594
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
4327.68
96
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
1655.85
125
-
... More
20 mm(twenty millimetre) cement plaster of mix : 1:4 (one cement: four fine sand) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
703.11
294
-
... More
12 mm(twelve millimetre) thick and 75 mm(seventy five millimetre) wide plain cement mortar bands in cement mortar 1:4 (one cement : four fine sand): Raised Band with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
285.75
5
-
... More
6 mm (six millimetre) cement plaster 1:3 (one cement : three fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
150.23
230
-
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (zero point seventy five litre per ten square metre) of approved brand and manufacture including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
241.01
119
-
... More
Providing and applying white cement based putty of average thickness 1 mm (one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
819.8
97
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
150.23
93
-
... More
Finishing walls with weather proof water based modified acrylic emulsion of approved shade Two or more coat applied@ 3.28 ltr/10 sqm)(at the rate three point two eight liter per ten square metre) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm(at the rate two point two zero kilogram per ten square metre) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge
243.51
182
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coat including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
426.06
83
-
... More
Making plinth protection 50mm (fifty millimetre) thick of cement concreten1:3:6 (one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm (fourty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
27.9
555
-
... More
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : two Sand) and inside plastring with cement plaster 1:3 (one cement : three sand) including earth work and laying 10 cm(ten centimetre) cement concrete in 1:5:10 (One Cement : Five Sand :Ten graded stone aggregate) of 40 mm (fourty millimetre) nominal size and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two Sand : four Graded stone aggregate of 20 mm (twenty milimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design. including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
46.5
1055
-
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i ) 1st course of applying cement slurry 4.4 kg/sqm (four point four killogram per square metre ) mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm (twenty millimetre) cement plaster 1:3 (one cement : three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. (one point seven killogram) per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Over laps at joints of PVC sheet should be 100 mm (one hundred millimetre) wide and pasted to each other with bitumen @ 1.7 kg/sqm) (at the rate one point seven killogram per square metre ) . including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
98.2
610
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen degrees) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand) : three graded stone aggregate 20 mm (tewnty millimetre) nominal size). including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
2.15
8516
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20 mm (tewnty millimetre) nominal size) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
2.45
7693
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
0.88
1726
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm(twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus :Pipes, cables etc. exceeding 80 mm(eighty millimetre) dia. but not exceeding 300 mm (three hundred millimetre)dia
13.8
270
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4(one cement : two coarse sand : four graded stone aggregate 20 mm (tewnty millimetre) including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge
0.23
6181
-
... More
Excavation in soil in Hilly area by mechinical means in all kinds of soil such as a pick work , jumper work , blasting work both in soft and hard rock with chiesling / wedging out rock (where blasting is prohibited) and other intermediate classification of soil including cutting and trimming of site slopes and disposal unserviceable material by mechnical transport and stacking the serviceable/ useful material on the road berms as per technical specification or muttams shall be left at suitable place as directed by Engineer- in - Charge and shall be removed only after attaining the formation level and after final checking of Engineer-in- Charge. The work shall be executed in workman like manner and aboid any damaged to the private / Govt. property in the vicinity of work site , if any damage occurs to any property during the course of execution shall be the absolute responsibility of the contractor , which shall have to be duly compensated by him in all cases. The recovery for useful stone 17.53 cum @ 300 per cum to Rs. 5259/- shall be done on prorata basis for the quantity of cutting in earth work effected including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
187.87
279
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto any lead also including ramming and watering of the earth in layers not exceeding 20 cm(twenty centimetre) in trenches, plinth, sides of foundation etc. complete with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
757.14
254
-
... More
Earth work in excavation for structure by any mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains upto any depth, including dressing of sides and ramming of bottoms, lift upto any height including getting out the excavated soil and disposal of surplus excavated soil as directed, upto any lead. All kinds of soil with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
114.96
192
-
... More
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:3 (one cement : three coarse sand) with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
209.2
6123
-
... More
Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm (one hundred millimetre) dia PVC pipe extending through the full width of the structures with slope of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 including carriage of material with in all leads and lifts and other incidentals and as per the direction of the Engineer-in-Charge.
54
351
-
... More
Providing and fixing vitreous China dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre(ten litre) low level flushing cistern with fitting and brackets, 40 mm(forty millimetre) flush bend, 20 mm(twenty millimetre over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china of universal 2061 EWC 570x460x400mm (five hundred seventy into four hundred sixty into four hundred millimetre) with combi flush of cera or its equivalent with white solid plastic seat and lid with C.P. flush bend. with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
1
12301
-
... More
White vitreous china extended wall mounting water closet of Code CNC-WHT-9593 with soft closing seat cover of size 360x535x380mm(three hundred sixty into five hundred thirty five into three hundred eighty millimetre) of jaquar /cera or its equivalent including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (three to six litre) (adjustable to 4 litre/ 8 litres (four to eight litre)), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
2
14704
-
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
210
-
... More
Providing & fixing white sahde 5005 urinal flat back 670x335x365mm(six hundred seventy into three hundred thirty five into three hundred sixty five millimetre) of cera or its equivalent having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. with necessary fiitting, screws etc. complete with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
1
9124
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm(fifteen millimetre) C.P. brass pillar taps, 32 mm(thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Oval 1005 over counter 450x300mm(four hundred fifty into three hundred) of cera or its equivalent with necessary fiitting, screws etc. complete with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
2
4468
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm(fifteen millimetre) C.P. brass pillar taps, 32 mm(thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Table top basin FNS-WHT-40931 of size 500x420x190mm(five hundred into four hundred twenty into one hundred ninety millimetre) of jaquar or its equivalent with necessary fiitting, screws etc. complet with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
4965
-
... More
Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin: 32mm (thirty two millimetre) dia including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
88
-
... More
Providing and fixing 600x450 mm (six hundred fifty into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
1308
-
... More
Providing and fixing PTMT liquid soap container 109 mm (one hundred nine millimetre) wide, 125 mm (one hundred twenty five millimetre) high and 112 mm (one hundred twelve five millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms (one hundred five grams) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
264
-
... More
Providing and fixing chromium plated towel rack with single rail No. 1581 of hotlinear series of jaquar or ESS-ESS complete with brackets fixed to wooden cleats with chromium plated brass screws with concealed fittings arrangement of approved quality and colour with necessary fiitting, screws etc. complete with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
1170
-
... More
Providing and fixing chromium plated cloth linear retractable (Ring) No. hotlinear series of jaquar or ESS-ESS complete with necessary fiitting, screws etc. complete with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
544
-
... More
Providing and fixing chromium plated. soap Dish Holder type (S-Steel) No.1531 of hotliner serise of jaquar or ESS-ESS or its equivalent with necessary fiitting, screws etc. complete with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
264
-
... More
Providing and fixing chromium plated toilet paper holder with flat recessed type No.1553 of hotliner serise of jaquar or ESS-ESS or its equivalent with necessary fiitting, screws etc. complete with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
528
-
... More
Providing and fixing chromium plated 1531 CET No. 1507 600mm(six hundred millimetre) towel rail of hotliner serise of jaquar or ESS-ESS or its equivalent with necessary fiitting, screws etc. complete with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
644
-
... More
Providing and fixing chromium plated brass bib cock of approved quality conforming to IS:8931 : 15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
8
673
-
... More
Providing and fixing chromium plated brass stop cock concealed) of standard design and of approved make conforming to IS:8931. 15 mm dia (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
6
723
-
... More
Providing and fixing chromium plated brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge
4
593
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :- 45 cm (forty five centimetre) length :- 15 mm (fifteen millimetre) nominal bore including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
6
91
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
6
522
-
... More
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty Degree Centigrade), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.(example) elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
108.4
398
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3000
10
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm (one hundred millimetre) inlet and 100 mm (one hundred millimetre) outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
7
827
-
... More
Providing and fixing high pressure UPVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. single equal branch,oval access door,collars, "P" or "S" trap etc., with clamps at 1.20 (one point two) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.(i) 110mm (one hundred ten millimetre) dia
71
653
-
... More
(ii)75 mm (seventy five millimetre) dia
15
566
-
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge. (i)110mm (one hundred ten millimetre) dia
12
66
-
... More
(ii)75 mm (seventy five millimetre) dia
4
56
-
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm (thirty one millimetre) dia of 79 mm (seventy nine millimetre) length and 62mm (sixty two millimetre) breadth weighing not less than 45 gms (forty five grams) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
7
156
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm (forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm(five hundred ten into one thousand forty) bowl depth 250mm(two hundred fifty millimetre) with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge
1
4466
-
... More
Providing and fixing PTMT jet spray of approved quality and colour with one metre tube pipe with necessary fitting etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
3
1214
-
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square(Slit) 150 mm (one hundred fifty millimetre) square with a height of 8 mm (eight millimetre) andweighing not less than 100 gms (one hundred grams) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
8
109
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 (three hundred into three hundred millimetre) mm size (inside) the weight of cover to be not less than 4.50 kg (four point five kilogram) and frame to be not less than 2.70 kg (two point seven kilogram) as per standard design: 150 x 100 mm (one hundred fifty into one hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Round Mouth Traps: 100mmx100mm (one hundred millimetre into one hundred millimetre) size P or S type including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
2
2296
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one poit five coarse sand (zone- III) : three graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : 4 four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.(i) Inside size 800mm x 800mm (eight hundred millimetre into eight hundred millimetre) and 500mm (five hundred millimetre) deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm (four hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38kg (thirty eight kilogram). (weight of cover 23 kg (twenty three kilogram) and weight of frane 15 kg (fifteen kilogram).) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
1
12768
-
... More
(ii) Inside size 800 mm x 800 mm (eight hundred millimetre into eight hundred millimetre) and 1000 mm (one thousand millimetre) deep including C.I cover with frame. (Light duty single seal pattern - 1) 455mmx610mm (four hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover and frame to be not less than 38kg (thirty eight kilogram). (weight of cover 23 kg (twenty three kilogram) and weight of frane 15 kg. (fifteen kilogram)) (a) With 300mm (three hundred millimetre) thick walls of squarred rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand).
1
22145
-
... More
Providing and fixing electrical Gyser I.S.I. marked having 25 ltrs (twenty five liters). Net water capacity with necessary accessories etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
4
10620
-
... More
Supplying and fixing C.I. cover without frame for manholes : 500 mm (five hundred millimetre) diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg (fifty eight kilogram) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
4
3576
-
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 110 mm (one hundred ten millimetre) dia. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
4
286
-
... More
Providing and fixing PVC cowl IS marked including fixing with approved adhesive etc. complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge..
1
139
-
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm (one hundred ten millimetre) dia. including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge.
1
167
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements