Public Works Department Tender

Centering and shuttering with steel plate including strutting, propping etcetera and removal of form work for retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etcetera as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads, lifts and other incidentals and further as per specification, approved Drawing & Design.

Centering and shuttering with steel plate including strutting, propping etcetera and removal of form work for all heights in Suspended floors, roofs, landings, balconies and access platform as per specification, approved Drawing , Design and as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads, lifts and other incidentals.

Centering and shuttering with steel plates including strutting, propping etcetera and removal of form work for all heights in Edges of slabs and breaks in floors and walls as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads lifts and other incidentals. and further as per specification, approved Drawing & Design complete.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth including all taxes,GST, carriage of material, within all leads and lifts within all leads, lifts and other incidentals and as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete.

Providing 100mm (Hundred millimeter) diametre PVC pipe of Supreme/ Phenolex Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetera extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards drainage face complete as per drawings and MORD technical specifications clause 614, 709, 1204.3.7 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in foudation and plinth including all taxes, GST, carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete.

Providing and laying mechanically mixed and vibrated re-inforced cement concrete M-20 ( M- twenty) design mix to obtain the minimum compressive strength of 20 N/MM2 ( twenty newton per square millimetre) with cement contents not less than 330 Kg ( three hundred thirty kilogram) per cubic metre mechanically mixed and vibrated including curing complete excluding the cost of of form work in foudation and plinth including all taxes, GST, carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved drawing & design complete.

Providing and laying mechanically mixed & vibrated re-inforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/square MM (Twenty five newton per square millimetre) with cement contents not less than 360 Kg/Per cubic metre ( Three hundred sixty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level to all floor levels as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads, lifts and other incidentals and further as per specification, approved drawing & design complete.

Providing and laying mechanically mixed & vibrated re-inforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/square MM (Twenty five newton per square millimetre) with cement contents not less than 360 Kg/Per cubic metre ( Three hundred sixty kilograme per cubic metre) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work upto all floor levels as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads, lifts and other incidentals and further as per specification, approved drawing & design complete.

Providing and laying mechanically mixed and vibrated re-inforced cement concrete work of grade M-25(M-twenty five design mix to obtain the minimum commpressive strength of 25 N /mm² (twenty five newton per square millimetre ) with cement contents not less than of 360 Kg (three hundred sixty kilogram) per cubic metre and curing complete excluding cost of form work and reinforcement for reinforced concrete work in walls (any thickness but not less than 0.10 (zero point ten) Metre thickness) including attached pilasters buttersses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetra from top of foundation upto floor all levels as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads, lifts and other incidentals and further as per specification, approved drawing & design complete.

Random rubble masonry brought to courses with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including all taxes and carriage of material within all leads, lifts and other incidentals and further as per specification, approved drawing & design complete.

Stone filling under floor/ behind retaining wall etcetera complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, within all leads, lifts and other incidental as per specification, approved drawing & design complete. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing tor steel reinforcement of TATA /SAIL for reinforced cement concrete work including straightening, bending, binding and placing in position complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing & design complete. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 6 mm (six millimetre) thick Cement bonded wood particle board as per IS:14276 plain multipurpose cement board(High pressure steam cured) with suitable screws in ceiling etcetera complete (frame work to be measured and paid seperatately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental as per specification, approved drawing & design complete. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing coloured anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC- 15) work of Zindal/Hindalco for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings, Design and specification as per the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing & Fixing coloured anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, minimum anodic coating of grade AC- 15) of Zindal/Hindalco for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket as required (Fittings shall be paid for separately) Aluminium section shall be smoothly rushed free, straight, mitred and jointed mechanically whereever required including aluminium snap beeding for glazing/ paneling, CP brass/ stainless steel screws complete as per specification approved drawing and design and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing & fixing 5.0 mm ( five millimetre) thick glass panes of Modi guard/ Saint gabian with glazing clips in aluminium doors, windows, clerestory windows, all complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre)as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying 600mm X 600mm X 10mm (six hundred millimetre into six hundred millimetre into ten millimetre) heavy duty vetrified tiles of Nitco / orient -bell/ Kazaria of aprroved shade and colour in flooring, treads of steps , skirting and landings laid over 12mm (twelve millimetre) thick cement mortar 1:4 (one cement isto four sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying Mandana red sand stone 55 x 55 centimetre ( fifty five into fifty five centimetre) in treads and risers of steps laid on a bed of 20mm thick cement mortar 1:4 ( one cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the stone including moulding , nosing, rubbing and granite polish finish complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 60mm ( sixty millimetre) thick factory made cement concrete interlocking paver block of NTC & of approved shape and colour of M -30 (M-thirty) grade made by block making machine with strong vibratory compaction of approved size design and shape laid in required pattern and including 50mm ( fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetera all complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying 18 mm ( eighteen millimetre) thick Granite single slab flooring of approved shade , design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings laid over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 ( one cement isto four sand) and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including preparing of nosing, moulding,rubbing, and polishing etcetera all complete as per specification, approved drawing & Design. and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets of TATA Durashine /SAIL/ Zindal steel in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads , lifts and as per specification approved drawing & Design or as per the direction of the engineer-in-chief and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets of TATA Durashine /SAIL/ Zindal steel in roofing having proper gola shape with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads,lift and as per specification approved drawing & Design or as per the direction of the engineer-in-chief and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing valley 90 cm. (ninety centimetre) overall with 0.60mm (zero decimal six millimetre) thick prepainted steel sheets of TATA Durashine /SAIL/ Zindal steel in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron over 5 micron primer coating and back coat of poltster of 5 micron over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washers complete with all accessories including all taxes, carriage of material within all leads and lifts and as per specification approved drawing & design or as per the direction of the engineer-in-chief and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 30cm ( thirty centimetre) wide 30cm ( thirty centimetre) deep 0.63mm (zero point six three millimetre) thick P.G.I ( plain galvanised iron) sheet gutter fixed with bolts, nuts and washers etcetera including making necessary conections with rain water pipe having dome shape grating of complete as per design including all taxes, carriage of material within all leads, lift and as per specification approved drawing & design or as per the direction of the engineer-in-chief and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred millimetre) dia single socketed pipes on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A of Supreme/Phenolex/ Prince including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion as per design including all taxes, carriage of material within all leads, lifts and as per specification, approved drawing & design or as per the direction of the engineer-in-Charge and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten millimetre) bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A of Supreme/Phenolex/ Prince including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion as per design including all taxes, carriage of material within all leads,lifts and as per specification or as per the direction of the engineer-in-charge and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet of SAIL/ Ispat/Zindal 2 mm thick ( two milimetre ) thick in ever board/facia /soffit/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per specification approved drawing & design as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separtely) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Steel work of TATA /SAIL welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trussed purlins in building as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental as per specification approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etcetera manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming toAISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7 / STAAD PRO-V8i / Architek V 2.5.16 / Revit architecture -2011 or equivalent. Proper usage of ConnectionAccessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance withASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per specification approved drawing, design subject to minimum 12mm diameter and 121mm length conforming toAISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and ssued by any NIT/IIT. The rate includes the concept design, detailed design,fabrication of sections, transportation, installation and all required fixing arrangement at site as described above as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm ( twenty seven point five centimetre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etcetera of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered including as per specification approved drawing & Design fixing accessories such as nuts, bolts, fasteners etcetera) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing of external wall system of CFC 100 mm ( one hundred millimetre) studs or as per structural design on Light gauge steel frame work with outer face having 0.5 mm ( zero point five millimetre) PPGL sheet fixed on 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm ( two millimetre to three millimetre) shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm ( one point six zero to four millimetre) thick of 8 to 10 gauge ( eight to ten) of length varying from 25 to 45 mm ( twenty five to forty five millimetre) and internal face 12.5mm thick calcium silicate board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes with mineral wool filling in between for insulation fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish as per spcification approved drawing & Design (cost of frame work to be paid for separately as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm ( Twelve point five millimetre ) thick calcium silicate board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes with mineral wool filling in between for insulation fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Painting two or more coats on new steel work of approved shade with Asian/Nerolac paint of approved brand and manufacture with synthetic enamel paint to give an even shade including priming coat of primer as per specification approved drawing and design including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing plinth protection with interlocking paver 40 mm (forty millimetre) thick with 23cm (twenty three centimetre) half rounded stone ware pipe for drainage purpose laid over cement concrete 1:4:8 ( one cement isto four sand isto eight graded stone aggrtegate ) as per standard design as per specification approved drawing and design including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:4 (one cement isto four sand) as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm ( fifteen millimetre) dia nominal bore G.I. Pipes (medium grade)complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 20 mm ( twenty millimetre) nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing in position water lifting pump (toollu pump) having 1.00 HP (one) horse power capacity of Kirloskar/crompton ISI mark including all necessary fitting required at site complete in all respect as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and placing in position 1000 (one thousand) litres net capacity PVC water storage tank of Sintex ISI 12701 marked with G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.