Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Jun 2024
Closing DateCancelled
Tender Amount₹ 2,70,80,955
Costs
EMD
₹ 5,41,619Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Govt Senior Secondary School At Bartu Tehsil Chirgaon Distt. Shimla
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_89359_1Bid Award Id
ViewTender No
2152-2251Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concretecomplete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
235.65
64803
275
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
516.15
264784
513
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts Circular complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
500.4
222177
444
Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral stair cases complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
46.18
26599
576
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
680.51
297382
437
Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm wide complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
297
38313
129
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
92.07
452431
4914
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: i)1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
108.46
831888
7670
Reinforced cement concrete work in beams, suspended floors, roofs landings, balconies, shelves, chajjas, lintels, bands, plain window sills, above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
176.65
1655917
9374
Reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) in columns, pillars,posts and struts etc. complete . excluding the cost of centering, shuttering etc.,including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
43.86
396187
9033
Reinforced cement concrete work in Stair cases ( except spiral stair case ) excluding landings but including preparing of the surface & finishing of nosing upto all floor level complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
5.53
51838
9374
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
62110
6397330
103
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in : Cement mortar 1:4 (1 cement : 4 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
139.68
172923
1238
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : in Cement mortar 1:6 (1 cement : 6coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
157.54
1621716
10294
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2.71
14184
5234
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2.02
12259
6069
Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
29.63
41244
1392
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. complete including carriage of material in all leads and lifts:- 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
54.99
199008
3619
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
10.8
5940
550
Providing and fixing M.S. grills of requirepattern in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.
2996
374500
125
Providing and fixing 6 mm thick Everest board in ceiling of size (595X595mm) of approved shade and pattern mounted on powder coated G.I. frame work fixed/ hanging with wall or ceiling etc. with specified clamp and G.I. wire and rawl plugs etc. complete.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
42.96
65771
1531
Providing and fixing 6 mm th E-board tiles in ceiling of size (600X600mm) of approved shade and pattern. E-grid of module size 600x600 mm shall be supported by 4/6 mm dia G.I. wire from the purlins/soffits of slab with butter fly clips etc. complete.including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
78
114036
1462
Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
27.5
54477
1981
Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
75.51
104807
1388
Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
27.53
24033
873
Providing and fixing 0.80 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
27.53
25272
918
Providing and fixing square edged cover fillets (beading) 19 x 6 mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts.
105.45
6854
65
Providing and fixing PGI Sheet 0.63mm thick lining with butt jointing and nails with necessary scwews complete as per Architectural drawing.
12.33
10369
841
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. : 250mm x 10mm.
72
8784
122
200 X 10 mm
6
420
70
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :125mm.
72
6336
88
75 mm.
47
3102
66
Providing and fixing aluminium sliding door bolts (Barrel type) anodized transparent or dyed to required shade and colour with bolts and nuts etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-300 X 16 mm
9
4302
478
250 X 16 mm.
21
8988
428
Providing & fixing 115 mm M.S bright finished brass hasps and stapples (safety type)with necessary screws complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
22
2442
111
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
44
2200
50
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
15
1800
120
Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) Dark shade pigment using ordinary cementt complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
245.98
329121
1338
Providing and fixing Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12mm thick cement plaster 1:3 (1 cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of including carriage of material within all leads and lifts as per direction of Engineer-in-charge:- Dark shade pigment using ordinary cement
19.53
29431
1507
Kota stone slab flooring over 20mm average thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1:4(1cement:4 sand) 19mm thick.
272.54
563067
2066
Kota stone slab flooring over 20mm risers of steps,skirting,dado and pillars laid on 12mm thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete.
31.47
70146
2229
Providing and laying Ceramic glazed floor tiles of size 300x300 x10 mmof 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
65.85
97260
1477
Providing and fixing 2mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately)
125.28
163866
1308
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge:- 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
95.48
131475
1377
40mm thick fine dressed stone flooring over 20mm thick base of cement mortar 1:5 with joints furnished flish.Red mandana stone.
6.48
10465
1615
Providing edge moulding to 18 mm thick marble/Kotah stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
100
20000
200
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, Floors, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble/Jaiselmer marble
4.5
18522
4116
Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Glazed tiles 10 mm thick.
144.46
134347
930
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate including carriage of material within all leads and lifts as per direction of Engineer-in-charge
130.96
62075
474
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick including carriage of material within all leads and lifts as per direction of Engineer-in-charge
10.41
4861
467
Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second course of roofing felt type 3 grade-I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or peasized gravel spread at 6 cubic decimeter per square metre, including preparation of surface but excluding grading complete with :. complete as per design approved by Engineer-in-Charge.
36
17424
484
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.
403.27
725886
1800
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. Ridges plain (500 - 600mm)
52.2
37218
713
Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. ,North light curves
10
9040
904
Providing and fixing Flashing 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge.:-Flashings/ Aprons.(Upto 600 mm)
69
44229
641
Providing and fixing Gutter 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. :-Gutter (600 mm over all girth)Gutter (600 mm over all girth)
91.6
113217
1236
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- 110mm diameter metre .
103.95
45841
441
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion:- PVC bend 87.5° 110 mm bend.
15
7905
527
PVC Door bend 110 mm bend
11
5016
456
PVC plain shoe 110mm
11
4026
366
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- 110mm.
58
16240
280
Providing and fixing MS BP sheet 2.00 mm thick in eves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge ( base members of steel work shall be measured and paid seperately ).
201.93
400629
1984
Providing and fixing single rebate door frame manufactued from ISLC 75x40 (with MS Flat 40 mm X 12 mm in combination for rebate welded together to make one frame i/c MS Flat Holdfast 30cm long and 4mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
150.6
156774
1041
Providing and fixing steel window made of frame with M.S. channel 75mm X 40mm and M.S. flat 75mm X 4mm in combination welded together and standard section F-7B style of standard size with sash bar or T- section 25mm x 25mm x 3mm and angle iron 25mm x 3mm and joints metred and welded with 16mm x 3.5mm lugs 10cm long embeded in C.C. block 1 : 3 : 6 (1 cement : 3 sand : 6 stone aggregates) or with wooden plug and screw or rawl plug and screw or with clips or with bolts and nuts as required and MS iron fittings complete including p/f glass pan 4mm thick in glazed and wire gauge of designation 85 with 0.56mm dia in wire gauge panel with glazing clips and special metal sash putty of approved make complete and applying a coat of approved steel primer after pretreatment of the surface complete job in all respect as per architectural drawing including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
104.09
852601
8191
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
14114
1496084
106
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
5147
689698
134
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:- M.S. tube.
83.5
14863
178
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
3
29154
9718
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
20.7
166842
8060
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1182.14
170228
144
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
393.13
52679
134
Polishing two coats with French spirit polishing on new wood and wood based surfaces to give even surface including cleaning the surface of all dirt ,dustand sand papered smooth and including a coat of wood filler.
20
3000
150
Applying priming coats With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
494.17
25202
51
Wall painting with Apex/ Synthetic enamel paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
494.17
46946
95
6 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
699.24
131457
188
12mm cement plaster on fair side of mix : 1:6 (1 cement: 6 fine sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
824.63
194612
236
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
899.22
228401
254
Distempering with Acrylic washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1559.92
162231
104
Distempering with Acrylic washable distemper of approved brand and manufacture to give an even shade in ceiling and slopy roof :New work (two or more coats) over and including water thinnable priming coat with cement primer complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
699.34
76927
110
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
820.26
142725
174
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2348.51
194926
83
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
100.32
60492
603
Providing and laying Cement concrete drain with cement concrete 1:3:6 ( 1 cement : 3 Sand : 6 graded stone aggregate 20 mm nominal size) mechanically mixed in open mix ed in open surface drain with plinth protection having internal size 20 x 15 cm & (twenty into fifteen centimter) with side wall of 10 cm ( ten centimter) thick & inside plastering with CM 1:3 including earthwork & finished with floating coat of neat cement complete as per standard design as per HPPWD specifiction 1990 volume -1 (one) including carriage of all labour equipments and materials to various location through complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
86.8
55291
637
Providing and fixing 12mm thick Green chalk board (non-magnetic) of size 2.40x1.20 with superior quality framing specialy anodized aluminium profile 20x15mm with corners of black surface shall be non porus ceramic particles on the top green surface for smooth writing with chak over 11mm thick particle board which shall have baking materials of galvanised sheet 0.28mm thick approvimately. The board shall be fixed on the wall with specially designed J clump and square clumps with the help of nylone sleeves and screws as per site requirement.including carriage of all labour equipments and materials to various location through complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
17.28
39484
2285
Providing and fixing 100 mm dia M.S. pipe embeded in CC. block 1:1.5:3 (30x30x40 cm.) including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (Base plate and welding charges etc. measured and paid for seprately)
16
17632
1102
P/ F Fiber cement designers Jali of Aerostone complete in all respect as per architectural drawing. i/c carriage of materials within all leads, lifts and other incidentals as per directions of Engineer- in- Charge.
28.02
27067
966
Providing and fixing 45x45 cm M.S. bracket of frame work 50x50mm & 20mmx20mm M.S. Hollow sections alongwith 12mmx12mm solid square bars in combination as per detail i/c carriage of materials within all leads, lifts and other incidentals as per directions of Engineer- in- Charge.
200
228400
1142
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)
7.03
36984
5261
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth l in all shapes and sizes in : in Cement mortar 1:6 (1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
22.61
205411
9085
Providing and fixing precast reinforced cement concrete chamber cover with frame complete for man hole of internal dimension 300mm x300mm i/c carriage of materials within all leads, lifts and other incidentals.
12
5304
442
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular shape 610x455 mm internal dimensions R.C.C. manhole cover with frame.
4
3476
869
Supplying and filling brocken/crushed stone aggregate chipping of hard stone of 40 mm size
5.35
6302
1178
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-110 mm dia.
31.1
16358
526
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
1.5
1659
1106
Supplying and filling sand for dispertion trench as per direction of Engineer- in- charge
6.46
10516
1628
Providing and fixing PVC cowl 110 mm dia
2
470
235
Providing and fixing PVC bends of required dgree:- Plain band 110 mm dia
2
664
332
Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to all level :In retaining wall etc.1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 40 mm nominal size)complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge
523.84
3370386
6434
Providing weep holes in brick masonry/stone masonry/plain concrete/reinfoced concrete, abutment, wing walls with 100 mm dia PVC pipe extending through the full length with of the structure with the slope of I (V) : 20 (H) towards drawing face complete as per drawing and technical specifications complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
402
98088
244
Stone filling behind retaining walls complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
91.2
121569
1333
Providing and fixing 20mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. External work
100
37800
378
Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall
60
21000
350
20 mm (twenty five millimetre) nominal bore :-
40
17720
443
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :25 to 40 mm nominal bore
1
618
618
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. (cost of water meter and stop cock to be paid separately).
1
532
532
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC. cover with frame 455mm x 610mm internal dimensions, , R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: - Inside dimensions 455mm x 610mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50.
8
41336
5167
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.
-
-
-
1216 (16 mm OD) pipe
260
107640
414
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.500 lt. capacity two Nos.
6000
60600
10.1
Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:-110 mm x 90 mm
12
5916
493
110 mm x 75 mm
14
6412
458
Providing and fixing High pressure PVC spigot and socked , waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads an lifts :-110mm dia
96
50496
526
75mm dia
96
42720
445
Providing and laying 150 mm dia (to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches including carriage of materials within all leads and lifts.
80
51440
643
Providing and fixing M.S.holder bats including steel bolts to sand cast iron/cast (spun) iron pipes embeded in and including cement concrete blocks 100mm X 100 mm X 100 mm of 1:2:4 mix including cost of cutting holder and making good the wall :-75 mm dia / size pipe
53
3869
73
110mm dia / size pipe
54
5076
94
Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-110 mm dia
10
3500
350
75 mm dia
10
3010
301
Providing and fixing PVC door band with oval access door , insertion rubber washer 3mm thick bolts and nutsISI marked complete including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-110 mm dia
12
5124
427
75 mm dia
12
3780
315
Providing and fixing PVC collars ISI marked including fixing with approved ashesive complete including carriage of materials with in all leads and lifts :75 mm dia
10
2830
283
110 mm dia
10
3460
346
providing and fixing PVC collars ISI marked including fixing with approved ashesive complete including carriage of materials with in all leads and lifts :75 mm dia
10
2060
206
110 mm dia
10
2480
248
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive complete including carriage of materials within all leads an lifts :-75 mm dia
15
3720
248
110 mm dia
15
4980
332
Providing and fixing PVC cowl including carriage of materials within all leads and lifts :- 75 mm nominal diametre :-
4
688
172
110 mm nominal diametre :-
4
940
235
Providing and fixing PVC S&S off sets as per IS: 1729 :- 76 mm off setsWith 75 mm dia pipe
7
1708
244
With 100 mm dia pipe
5
1290
258
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) No. 20007 of HINDWARE with seat and lid, 10 litre low level white P.V.C. flushing cistern,No. 21001 including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
2
15066
7533
Providing and fixing water closet squatting pan (Indian type W.C. pan ) No.20004 of HINDWARE with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x400 mm mm with integral type foot rests including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
8
52520
6565
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge. :Flat back wash basin of size 550x400 mm No.10001
10
37370
3737
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
2
4586
2293
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
2
576
288
Providing and fixing PVC. 110mm size 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and and PVC pipe with approved adhesive etc. complete. 110 mm dia.
6
2304
384
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm No.60002 with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4
34144
8536
Providing and fixing white vitreous china divison plate plate including marking all connections but excluding the cost of fittings: Flat back wash basin of Size 600x300mm
3
6516
2172
Providing and fixing G.I. Union for wash basin or sink including carriage of materials within all leads and lifts :-
-
-
-
32mm dia
12
3720
310
Providing and fixing C. P. Brass S Trap for wash basin and sink 32mm dia.
12
3744
312
Providing and fixing PTMT. Bottle Trap for wash basin or sink Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gmsincluding carriage of materials within all leads and lifts :-
-
-
-
32mm dia
12
10164
847
Providing and fixing C.P. brass waste for wash basin or sink including carriage of materials within all leads and lifts :-
-
-
-
32 mm dia
12
2400
200
Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
12
1800
150
Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut including carrage of material within all leads and lifts:-
26
4628
178
Providing & fixing 110mm dia C.P. grating for floor or nahani / gully / floor trap including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
10
11250
1125
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
10
8990
899
Providing and fixing 600mmx120mm glass shelf with C.P. brass bracket and guard rail complete,
10
10050
1005
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts.
10
1630
163
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 100x510 cm No. NCKS 313
2
11622
5811
Providing and fixing 15mm dia CP brass bib tap of (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
22
13332
606
Providing and fixing 15mm dia CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
12
8964
747
Providing and fixing 15mm dia C.P.brass angle valve of jaquar with flange (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts.
12
11508
959
Providing and fixing C.P.brass stop cocks including carriage of materials within all leads and lifts :-
-
-
-
15mm dia :-
22
10230
465
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.:-15 mm nominal bore with 45cm length
28
3472
124
Providing and fixing brass full way valve with wheel including carriage of materials with in all leads and lifts :15mm nominal bore
5
2380
476
20 mm nominal bore :-
5
3439
687.9
Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 98 mm long, weighing not less than 75 gms
4
1572
393
Providing and instalation Electric pump 2 HP complete including carriage of materials in all lead and lifts.
1
8020
8020
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including RCC cover with frame 455x610 mm internal dimensions, : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.
4
42596
10649
Providing and laying cement concrete 1:4:8 bedding for stone ware pipes of the following internal diameters necessary form work and curing complete including carriage of materials with in all leads and lifts:-150mm
50
47650
953
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements