Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date8 Aug 2024
Closing Date16 Aug 2024
Tender Amount₹ 4,27,93,537
Costs
EMD
₹ 8,56,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Hostel For 90 Boys In Govt Senior Secondary School At Kaza,distt.lahaul And Spiti H.p
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_91543_1Bid Award Id
ViewTender No
3841-44 Dated 29/07/2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
34.09
97009
2845.7
Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (one cement : two Sand : four graded stone aggregate twenty millimetre nominal size) to give a smooth and even surface including centring and shuttering etc but excluding cost of reinforcement in string courses, copings, bed plates, anchor blocks, plain windows sills and the like including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
0.92
9551
10381.85
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (one Cement : four coarse sand: eight graded stone aggregate forty millimetre nominal size) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
36.06
303855
8426.4
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works up to plinth level 1:5:10 (one cement : five coarse sand : ten graded stone aggregate forty millimetre nominal size) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
55.94
440667
7877.5
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (one cement : two coarse sand: four graded stone aggregate twelve point five millimetre nominal size) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
46.05
22981
499.05
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
46.05
9173
199.2
Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate twenty millimetre nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
45.39
50698
1116.95
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (one cement : six sand) and inside plastering with cement plaster 1:3 (one cement : three sand) including earth work and laying 10 cm cement concrete in 1:5:10 (one cement : five sand : ten graded stone aggregate of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
102.66
164528
1602.65
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:5:10 (one cement : five coarse sand : ten graded stone aggregate forty millimetre nominal size) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
90.48
889183
9827.4
Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
221.92
151404
682.25
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns etc. for mass concrete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
304.69
95779
314.35
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
77.69
53004
682.25
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and acceess platform including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
762.04
601287
789.05
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
355.95
290739
816.8
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
643.95
407072
632.15
Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral- staircases including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
27.52
18804
683.3
Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls : under 200 Cm wide including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
50.7
9681
190.95
Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc precasted in cement concrete 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate twenty millimetre nominal size) including cost of required Centering & shuttering, hoisting and setting in position with cement mortar 1:3 (one Cement : three coarse sand) complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
3.85
49923
12967.1
Reinforced cement concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate twenty millimetre nominal size) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
13.36
182009
13623.5
Providing and fixing weep holes with 110mm dia pvc pipes laid in slope of 1:20 including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
36
14623
406.2
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement in all work up to plinth level in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate twenty millimetre nominal size) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
4.81
52527
10920.55
Providing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
66766
7384319
110.6
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) All works upto plnth level including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
148.99
1740881
11684.55
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately), All works above plinth level up to Floor-V Level including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
242.87
3216728
13244.65
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
11.52
171554
14891.9
Brick work with sundried F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : mud mortar including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
72.1
552174
7658.45
Half brick masonry with sun dried clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in mud morter including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
359.38
329838
917.8
Providing and filling Cavity wall with mud morter of quarried clay approved by Engineer in charge including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
26.39
63033
2388.55
Providing and laying factory made Precast concrete solid blocks of 200 mm /300mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level : Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
155.14
1425783
9190.3
Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm thickness of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level: Cement mortar 1:4(One cement : Four coarse sand) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
228.07
232414
1019.05
Providing and laying factory made Ornamental Moulded Precast concrete solid blocks of 400x200x100mm of grade M10 made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level : Cement mortar 1:6 (one cement : six coarse sand) including fixing at required distance along Chhajja and walls as per drawing including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
49.42
480256
9717.85
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement : six sand twelve graded stone aggregate twenty mm nominal size) at plinth level. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
82.3
667057
8105.2
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (one cement : six coarse sand) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
21.55
190261
8828.85
Providing and laying 20 cm.thick composit stone masonry with stone facing of chisel dressed stones one line dressed in cement mortar 1:6(one cement :six sand) and concrete backing with cement concrete 1:3:6 (one cement: three sand: si graded stone aggregate twenty millimetre nominal size) on inner face of walls including centring, shuttering and propping complete up to all floor levels including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
67.76
193461
2855.1
Boulder filling under floors tightly hand packed with hard stones of approved quality complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
101.98
180336
1768.35
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) in 2nd class Deodar wood including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
6.62
859642
129855.3
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws having double groove for fixing double glass unit whereever required, excluding panelling and Glass pans which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paidseparately) Second class Deodar wood : 40mm (forty millimetre) thick shutters including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
184.52
676016
3663.65
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
Glass in shutter & Fixed Glass portions with a glass of 5mm (Five millimetre) Plain Float Glass complete in all respect
132.66
263270
1984.55
4 mm thick frosted glass pane (weight not less than 10 kg per sqm)
6.33
12343
1950.05
Pre-laminated particle board with : decorative lamination on both sides , Grade I, Type II IS: 12823 marked
50.06
109293
2183.25
Second class Deodar wood panel
1.08
3348
3100.6
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (one point four millimetre) in both directions with wire of dia 0.63 mm (Zero point six three millimetre), for doors, windows and clerestory windows with hinges and necessary screws : 40 mm (Forty millimetre) thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size in 2nd class Deodar wood including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
106.65
533825
5005.4
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate twenty millimetre nominal size) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
656
138022
210.4
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. in 2nd class Deodar wood including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
4.31
522081
121132.7
Providing and fixing 50 mm (Fifty millimetre) thick wooden planking, tongued and grooved in flooring over angle iron frame including fixing with iron screws complete (Frame work to be measured and paid for seperately) with 2nd class deodar wood including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
669.67
5147753
7687
Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete (Frame work shall be paid for separately). with 12mm thick water proof ply conforming to IS sqm : 1328 BWR type including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
440.83
657299
1491.05
Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete in 2nd class teak wood including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
Corner beading 50x50 mm (base and height)
385.45
103127
267.55
Top beading/moulding 75X37.5 mm (base and height)
385.45
107347
278.5
Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 3097 grade-I, including top cover of 6 mm veneered particle board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc.in particle board with decorative veneering on both sides including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
72
57049
792.35
Providing and fixing teak wood lipping of size 25x3 mm in pelmet including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
144
9230
64.1
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm, with necessary accessories and screws etc. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1
1064
1064.2
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
300x16 mm size complete
1
278
278.1
250x16 mm size complete
45
7816
173.7
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
250x10 mm size
92
11026
119.85
200x10 mm size
190
21175
111.45
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
125mm
284
18161
63.95
100mm
380
21565
56.75
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete, Twin Rubber Stopper including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
20
1467
73.35
Providing and fixing aluminium hooks and eyes, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 150 mm including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
190
7324
38.55
Providing and fixing cup-board with 19 mm thick water proof termite resistant commercial board box including shelves and shutters, the back side cup board / cabinet shall be 8 mm thick ply and all the cut portions of shelves shall be finished with 6 mm thick hard wood edging. The cut portion of shutters from all sides shall also be finished with 12 mm thick hard wood edging. The shutter from out side shall be finished with 1 mm thick Lamination of approved shade to match with panelling including stainless steel hinges hinges and magnetic catcher with in all accessories etc. complete as per detailed drawing including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
147.61
1109850
7518.8
Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete, 40mm including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
90
44028
489.2
Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
102
27478
269.4
Providing and fixing 100mm x75mm moulded hand rails in straight length complete in 1st class Indian Teak wood including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer
65.05
106382
1635.4
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. :Fixed to openings /wooden frames with rawl plugs screws etc. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1279.8
289618
226.3
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
18921.8
2512815
132.8
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, kg railings, brackets, gates and similar works including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
11448.35
1901570
166.1
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer with M S Tube/M S D-Pipe complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
10.67
1787
167.5
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separtely) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
7.03
14930
2123.85
Providing and laying Matte finish Ceramic floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (one cement : four coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
134.64
233108
1731.35
Providing and fixing glazed Digital tiles 300x600 x 8 mm thick of approved Shade and manufacturer in skirting risers of steps and dado 12 mm thick cement mortar 1:3(one cement : three sand) and jointed with cement slurry including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
311.4
535296
1719
Kota stone 25 mm thick slab 55x55cms mirror polished flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) with 25 mm thick including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
21.38
39561
1850.4
Kota stone 25 mm thick slab flooring in treads with Single piece kota stone(upto 1.05m in length) over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) : Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre and 25mm thick including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
22.68
42769
1885.8
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
65.1
11161
171.45
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
3.38
7184
2125.65
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (one cement : five sand) with joints 3mm thick, side buttered with cement mortar 1:2(one cement : two stone dust) admixed with pigment to match the shade of stone and pointing with same morter with Red sand stone including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
18.41
26800
1455.75
Providing and fixing 0.62mm (zero point six two millimetre) thick troughed prepainted steel sheet of TATA Durashine in roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating, i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
391.48
733183
1872.85
Providing, supplying and installation of Microcell Polycarbonate 20mm thick (minimum). UV protected panel system which shall be uniform in colour with an integral microcell core. They should be manufactured with vertical standing seam with standing seam height of 10 to 20 mm at both sides of the panel. Panels shall be fixed on MS/trusses, purlins with continuous structural aluminium double wall I-profile spacer together with snap-on connector. These connectors to interlock the panel shall have to 2-4 tooth grip-lock locking mechanism to ensure maximum uplift capability and shall pass a pull-out load of minimum 4000 N (4kN) when tested as per ISO 6892:1998 and IS 1608:2005. Panel shall be with additional End-Cap/ aluminium U-profile (mill finish) for ends including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
174
311181
1788.4
Providing and fixing ridges or hips 60 cm overall with 0.62mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
74.5
85872
1152.65
Providing and fixing flushing 38cm overall with 0.62mm thick prepainted sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
28.8
28084
975.15
Providing and fixing valley 90 cm overall 0.62mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
69.2
116321
1680.95
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately) : 6 mm thick Cement bonded wood particle board as per IS:14276 including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
8.33
6551
786.5
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (one cement: six coarse sand) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1441.23
512861
355.85
Extra for plastering done on moulding, cornices or architraves including neat finish to line and level upto all floor and all heights including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
333.59
185092
554.85
6mm cement plaster of mix: 1:3 (onecement : three Fine sand) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
883.83
238943
270.35
25mm mud plaster with chopped straw @ 33kg/Cu.m.of earth in two coats backing coat 20mm thick and finishing coat 5mm thick on brick/stone masonry walls for interior plastering upto floor two level including arrises,internal round angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1421.25
240404
169.15
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1477.23
174313
118
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
75.03
8500
113.3
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including water thinnable priming coat with approved cement primer including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
851.89
149038
174.95
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, Two or more coats on new work including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1565.93
163248
104.25
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface with Water thinnable cement primer including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1565.93
102098
65.2
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives on New work (Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1230.62
218004
177.15
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
3521.45
604280
171.6
Polishing two or more coats on new wood and wood based surfaces with french polish including applying a coat of wood filler rubbing and polishing including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
22.77
8393
368.62
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
100.1
130590
1304.6
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
115mm nominal bore
23
8786
382
20mm nominal bore
18
8343
463.5
32mmnominal bore
18
11399
633.3
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc : Concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm nominal bore including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
12
6852
571.05
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
15mm nominal bore
4
1330
332.65
20mm nominal bore
45
17624
391.65
Providing and fixing Polyethelene Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete : Concealed work, including cutting chases and making good the wall etc including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
2025 (25 mm OD) pipe
42
26439
629.5
1620 (20mmOD) pipe
54
29438
545.15
1216 (16 mm OD) pipe
81
40738
502.95
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1
762
762.7
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1
690
690.35
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
7
3480
497.2
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
15
105834
7055.6
Providing and fixing viterous China wash basin Cat No. : S2040121 without pedastal or equivalent 0f superior quality including cutting holes & making good the same including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
15
58100
3873.35
Providing and fixing white vitreous china flat back urinal basin of Cera urinal Casey, old cat no 5001 (new Cat No. S4020101) complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
9
29125
3236.2
Providing and Fixing Soap dish stainless steel CAN -1131N of Jaquar or equivalent including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
15
12043
802.9
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
15
2312
154.15
Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
30
2647
88.25
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
15
24650
1643.35
Providing and fixing Single Towel Rail Cat No. AQN-CHR-7711 of of JAQUAR, or equivalent of superior quality including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
12
33380
2781.7
P/F Glass shelf 600 mm long with C.P. Brass bracket and guard rail no. AKP-CHR-35771P of Jaquar or equivalent fixed with C.P. Brass screws etc including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
15
39315
2621.05
Providing and fixing C.P. brass long nose bib cock Cat no.CON 107KN Jaquar or equivalent single control of approved quality conforming to IS standards. 15 mm nominal bore including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
27
49262
1824.55
Providing and Fixing piller cock single control CON-011KN of Jaquar or equivalent including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
15
25559
1703.95
Providing and Fixing Angular stop cock with wall flange of continental series no. CON 053KN of jaquar or equavalent single control complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
30
32613
1087.1
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
15mm
3
811
270.45
20mm
6
1767
294.55
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
6000
67200
11.2
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
6
2502
417.05
Providing and fixing C P Brass grating of approved quality and colour. Circular type including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
33
3573
108.3
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
110mm
161.5
48595
300.9
150mm
30
10980
366
Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
33
43995
1333.2
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. 110mm dia including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
6
1365
227.6
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
110mm
15
2199
146.6
150mm
1
153
153.7
Providing and fixing PVC single equal branch 110mm dia with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
6
1365
227.6
Providing and fixing PVC plain single equal branch 110mm dia ISI marked including fixing with approved adhesive etc including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
12
2406
200.5
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
-
-
-
110mm
9
960
106.7
150mm
2
241
120.95
Providing and Fixing 110mm dia PVC Cowl including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
1
227
227.6
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. 110mm dia including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
48
4437
92.45
Constructed brick masonry manhole in cement mortar 1:4 (1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With Sewer bricks conforming to IS : 4885 including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
4
137766
34441.5
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
2
8228
4114.2
Providing and fixing in position pre-cast R.C.C. manhole cover and frame L D-2.5 of required shape and approved quality rectangular shape 600x450 mm internal dimensions including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
2
3435
1717.8
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
33.6
83022
2470.9
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter including carriage of materials within all leads, lifts and other incidentals complete as per direction of Engineer incharge.
2
2067
1033.6
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements