Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date15 May 2020
Closing Date22 May 2020
Tender Amount₹ 1,05,09,196
Costs
EMD
₹ 1,38,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
C/o Type-iv 6 Nos In Chc Sujanpur In Distt. Hamirpur
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_PWD_37149_1Bid Award Id
ViewTender No
No.PW/TDD/GA-NIT/2019dt.Tender Authority
Public Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.:
-
-
-
... More
Foundation Footings, basis of column etc mass concrete
310.41
-
-
... More
Flat surfaces such as soffits of suspended floors, roofs, landings shelves and the like etcetera In all thickness in any floor level.
646.63
-
-
... More
Columns, pillars, posts and struts, square rectangular/polygonal in plan.
391.68
-
-
... More
Beams, cantilivers, girders and lintels such as soffits of beams, beam haunching, cantilevers girder, bressumers and lintels of all height/thickness.
421.24
-
-
... More
Edges of slabs and breaks in floors and walls under 20cm (Twenty centimetres) wide.
279.28
-
-
... More
Stair Case with sloping of stepped soffits excluding landing but including preparing of the surface and finishing of nosing upto floor to all level.
24.99
-
-
... More
Vertical surfaces such as walls any thickness partitions and the like including attached pillasters, buttresses, plinth and string courses and the like.
103.37
-
-
... More
Providing and laying cement concrete mechanically mixed and vibrated 1:6:12 ( One cement : six sand : twelve graded/crushed stone aggregate 40mm (Forty millimetres) nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including all incidentals.
18.9
-
-
... More
Providing and laying cement concrete mechanically mixed and vibrated 1:4:8 (One cement : four coarse sand : eight graded/crushed stone aggregate) 40mm (forty millimetres) nominal size and curing complete excluding cost of form work in foundation and plinth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
27.72
-
-
... More
Providing and laying cement concrete mechanically mixed and vibrated 1:4:8 (One cement : four coarse sand : eight graded/crushed stone aggregate) 25mm (twenty five millimeters) nominal size and curing complete in foundation and plinth ( in Rain water harvesting tank ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
2
-
-
... More
Providing and laying damp proof course 38mm ( thirty eight milimetre ) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded crushed stone aggregate ) 12.5mm ( twelve point five milimetre ) nominal size and curiing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
9.64
-
-
... More
Applying a coat of hot bitumen ( mexphalt 80/100 ( eighty oblique hundred ) or equivalent ) using 1.70kg ( one point seventy kilogramm ) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
9.64
-
-
... More
Providing and laying design mix cement concrete M20 ( M- Twenty) with characteristics strength of 20 N/mm2( Twenty Newton per meter square) with minimum cement content of 350.00 kg( three hundred fifty kilogramme), mechanically mixed and vibrated and curing complete excluding the cost of form work and reinforcement for reinforced concrete work upto all floor levels in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.:
-
-
-
... More
Foundation footings bases of columns and the like and mass concrete
70.56
-
-
... More
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level
191.98
-
-
... More
Columns, pillars, posts and struts upto all floor level
36.72
-
-
... More
Stair case except spiral stair cases excluding landing but including preparing of topsurface and finishing of nosing upto all floor height in all thickness.
4.14
-
-
... More
Wall any thickness but not less than 0.10 mtr. (Zero point ten metres) thick attached pilasters buttersses plinth and string courses from top of foundation upto all floor level.
15.43
-
-
... More
Providing and laying design mix cement concrete M20 ( M- Twenty) with characteristics strength of 20 N/mm2( Twenty Newton per meter square) with minimum cement content of 350.00 kg( three hundred fifty kilogramme) including mechanically mixing and vibrating reinforced concrete chajjas not exceeding 10cms (Ten centimetres) thickness upto all floor level including finishing the exposed surfaces with cement mortar 1:3 (One cement : three coarse sand) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcement upto all floor levels in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
1.75
-
-
... More
Providing tor steel reinforcement (TATA/SAIL) for reinforcement cement concrete work including bending, binding, straightening and placing in position including the cost of binding wire complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
43888
-
-
... More
Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 ( One cement : Three coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
148.33
-
-
... More
Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75kg (Two point seven five kilogramme) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the cement surface complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
628.08
-
-
... More
Providing and laying reinforced cement concrete 1:2:4 (One cement : two coarse sand : four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size mechanically mixed and vibrated and curing complete including the cost of form work upto all floor levels in all heights in string courses, coping, bed plates, anchor blocks, plain/ornamental window sills and the like including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
3.13
-
-
... More
Providing and laying (MODCRETE MAKE) autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm (One hundred fifty/two hundred thirty/three hundred millimetres) thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately) including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including all incidentals.
85.24
-
-
... More
Providing and laying (MODCRETE MAKE) autoclaved aerated cement blocks masonry with 100 mm (One hundred millimetre) thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (One cement : four coarse sand ). The rate includes providing and placing in position 2 Nos 6 mm (Six millimetre) dia M.S. bars (TATA/SAIL) at every third course of masonry work including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including all incidentals.
53.41
-
-
... More
Brick work using second class common burnt clay building bricks in cement mortar 1:4 ( One cement : four coarse sand) in foundation and plinth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.
7.85
-
-
... More
Half brick masonry using second class common burnt clay building bricks in cement mortar 1:4 (One cement : four coarse sand) in super structure upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.
4.68
-
-
... More
Providing and fixing 12mm (Twelve millimetre) thick prelaminated board both side bwp phenol bounded exterior/interior side grade (Kitply/Green Ply/Century ply make ) panelled shutters with frame of first class deodar wood for doors including bright finished black enamelled iron butt hinges with necessary screws 40mm ( forty millimetre ) thick frame including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
98.61
-
-
... More
Providing and fixing 19mm (Nineteen millimetres) thick HDHMR water proof antitermite resistant board in approved cup board, box shutter partation and shelves etcetra with both side laminated made up of ACTION TESA, edges wherever required to be covered with PVC tape fixed with adhesive including all fixing arrangement as per the direction of Engineer-in-Charge including all incidentals.
195.91
-
-
... More
Providing and fixing 40mm (Forty millimeters) thick wire gauge shutters with 2nd (Second) class deodar wood using galvanized M.S. wire gauge of I.S. gauge designation No. 85G (Eight five gauge) with beading in panels in door window and clerestory window with wire of dia 0.56mm (Zero point five six millimeter) for doors windows clerestory windows including bright finished black enameled iron butt hinges with necessary screws and beading in pannels both side complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
28.5
-
-
... More
Providing and fixing 300×16mm (Three hundred into sixteen millimetre) anodized aluminium sliding door bolts anodized / powder coated colour or shade with bolts and nuts screws etc complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
48
-
-
... More
Providing and fixing aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
-
-
-
... More
250x10mm (Two hundred fifty into ten millimetres) nominal size.
120
-
-
... More
100x10mm (One hundred into ten millimetres) nominal size
456
-
-
... More
Providing and fixing aluminium handles anodized/ powder coated transparent including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
-
-
-
... More
125mm (One hundred twenty five millimetres)
48
-
-
... More
100mm (One hundred millimetres)
216
-
-
... More
Providing and fixing 150mm (One Hundred fifty Millimeter) bright finished or black enamelled iron Helical door spring complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
12
-
-
... More
Providing and fixing Mild Steel grills of required pattern on wooden/steel frames of windows etcetera ornamental with mild steel flats square or round bars with round headed bolts and nuts or by screws/welding in plain/ornamental grill as directed by the Engineer-in-Charge including entire carriage of material with in all leads and lifts and including other incidentals.
1143.9
-
-
... More
Providing and fixing 100mm (One Hundred millimetre) bright finished brass floor door stopper with rubber cushion (heavy duty) screw etcetera to suit shutter thickness upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
48
-
-
... More
Providing and fixing 50mm ( Fifty milimetre ) bright finished brass cup board or ward robe knob including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
72
-
-
... More
Providing and fixing 150mm (One hundred fifty millimetres) dia bright finished hasps and stapples (safety type) with necessary screws etcetera upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
72
-
-
... More
Providing and laying ceramic tiles Digital HD Series 8mm (Eight millimetres) thick in flooring, 300x300mm (Three hundred into three hundred)/ 400x400mm (four hundred into four hundred milimetre ) size non slipry Nitco/Kazaria make in pattern finish in flooring, treads of steps laid on a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : three coarse sand) finished with flush pointing in white cement complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge.
45.73
-
-
... More
Providing and laying Digital HD Series rectified ceramic tile in pattern finish of size 300mmx600mm x8mm /450mmx300mmx8mm (Three hundred into six hundred into eight millimetres/Four hundred fifty into three hundred into eight millimetres) thick of Kajaria / Nitco in skirting risers of steps and dado on 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : three coarse sand) and jointed with cement slurry complete within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials in all leads and lifts and including all incidentals.
260.62
-
-
... More
Providing and laying Pre-Polished 60mm (Sixty millimetre) thick heavy duty precast cement concrete interlocking paver blocks NTC (approved by the Engineer-in-Charge ) vibro compacted upto M-50 grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (Twenty five millimetre) thick average thickness of cement mortar 1:4 (One cement : four coarse sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
185.73
-
-
... More
Providing and laying 10mm (Ten millimetres) thick antiskid water proof stain and impact resistant Digital glazed HD series double charge vitrified tiles Nitco/Kazaria 600x600mmx10mm (Six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring, tread of steps and landings laid over 12mm (Twelve millimetres) thick cement mortar 1:3 (One cement : Three coarse sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.
509.76
-
-
... More
Providing and fixing mild steel angle iron, channels, mild steel flates (TATA/SAIL) in single pattam doors, windows and clerestory window structural steel frame in combination of 1 No. (One number) angle 40x40x4mm (Forty into forty into four millimeter) and 1 No. (One number) M.S. flat 50x5mm (Fifty into five millimeter) welded together to form a frame including applying a priming coat including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
177.3
-
-
... More
Providing and fixing mild steel angle iron, channels, mild steel flates (TATA/SAIL) in double pattam doors, windows and clerestory window structural steel frame in combination of 2 No. (Two number) angle 40x40x4mm (Forty into forty into four millimeter) and 2 No. (Two number) M.S. flat 20x5mm (Twenty into five millimeter) and 1 No. (One number) MS flat 50x4mm (Fifty into four millimetre) welded together to form a frame including applying a priming coat including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
72
-
-
... More
Providing and fixing mild steel angle iron, channels, mild steel flates (TATA/SAIL) in double pattam doors, windows and clerestory window structural steel frame in combination of 2 No. (Two number) angle 40x40x4mm (Forty into forty into four millimeter) and 1 No. (One number) M.S. flat 20x5mm (Twenty into five millimeter) and 1 No. (One number) MS flat 50x4mm (Fifty into four millimetre) and 2 No. (Two number) 75x4mm (Seventy five into four millimetre) welded together to form a frame including applying a priming coat including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
43.2
-
-
... More
Providing and fixing mild steel angle iron, channels, mild steel flates (TATA/SAIL) in single pattam doors, windows and clerestory window structural steel frame in combination of 1 No. (One number) channel 75x40mm (Seventy five into forty millimeter) and 1 No. (One number) M.S. flat 75x40mm (Seventy five into forty millimeter) and 1 No. (One number) MS flat 20x5mm (Twenty into five millimetre) welded together to form a frame including applying a priming coat including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
290.7
-
-
... More
Providing and fixing mild steel angle iron, channels, mild steel flates (TATA/SAIL) in single pattam windows and clerestory window structural steel frame in combination of 1 No. (One number) channel 75x40mm (Seventy five into forty millimeter) and 2 No. (Two number) M.S. flat 20x5mm (Twenty into five millimeter) welded together to form a frame including applying a priming coat including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
290.7
-
-
... More
Providing and laying 20mm (Twenty Millimeter) thick granite work in single piece (Table rubbed and Polished) in flooring, treads, steps, landing, skirting and risers 20mm(Twenty Millimeter) thick base in cement mortar 1:3 ( One Cement : Three sand) including jointing with cement mortar 1:2 ( One white cement : Two marble dust) with an admixture of pigment to match the shade of the granite within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials in all leads and lifts and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
74.47
-
-
... More
Providing and laying 20mm (Twenty millimetres) thick granite stone of approved shade and colour by Engineer-In-Charge on kitchen top/faces of shelves in flooring laid on 20mm (Twenty millimetres) average thickness base of cement mortar 1:3 (One cement : three coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.
13.43
-
-
... More
Providing and laying 50mm (Fifty millimetres) thick cement concrete flooring 1:2:4( one cement :two coarse sand : four graded stone aggregate 20mm (twenty ) millimetres nominal size laid in one layer finished with a floting coat of neat cement including entire carriage of materials within all leads and lifts and other incidentals.
6.76
-
-
... More
Making moulding nosing in Kota stone/marble/granite including returned moulded end and angle to moulding complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals in pattern finish approved by the Engineer-in-Charge including all incidentals.
126.78
-
-
... More
Providing and fixing steel glazed shutters in Z-Sections (TATA/SAIL) using 4mm (Four millimetres) thick glass for doors, windows and clerestory windows using metal beading of approved quality shape and section with fittings and necessary screws complete including applying a coat of primer with red lead paint upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
64.54
-
-
... More
Providing and fixing wire gauge shutter is Z sections (TATA/SAIL) using mild steel wire of IS gauge disignation 85G (Eighty five Gauge) with wire of 0.56 mm ( Zero point Fifty six milimeter) dia for doors window and clerestory windows with metal beading of approved quality and shape and section with necessary screws and applying a coat of primer with red lead paint complete as per approved specificiation/design upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals. The rates are inclusive octroi, royalty, malkana, toll tax, sale tax or other taxes imposed by the Government.
64.54
-
-
... More
Supplying and fixing glass panes (Saint Gobain make) with putty and nails including removal of broken glass panes wherever necessary 5.5mm (Five point five millimetres) thick plain glass ncluding entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
153
-
-
... More
Providing and fixing on wall face110mm (One hundred ten millimetres) dia PVC (Finolex) rain water pipes of working heaving pressure not less than 4.5kg/Cm² ( four point five kilogram per centimetre square ) including filling the joints with approved adhesive complete and floors upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
104
-
-
... More
Providing and fixing 110mm (One hundred ten millimetre) nominal diametre size pipe C.I. holder bats including steel bots to coarse PVC pipes of embedded in and including cement blocks 100mmx100mmx100mm (One hundred into one hundred into one hundred millimetres) 1:2:4 (One cement : two coarse sand: four graded stone) mix aggregate 20mm (Twenty millimetres) nominal size including cost of cutting holes and making good the wall complete including entire carriage of materials in all leads and lifts and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
96
-
-
... More
Providing and fixing PVC plain bend 110mm (One hundred ten millimetres) dia on wall face PVC (Finolex/D-plast accessories for rain water pipes working pressure not less than 4.00kg/Cm² ( four kilogram per centimetre square ) including filling the joints with approved adhesive complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
16
-
-
... More
Providing and fixing PVC plain shoe 110mm (One hundred ten millimetres) dia on wall face PVC (Finolex/D-plast accessories for rain water pipes working pressure not less than 4.00kg/Cm² ( four kilogram per centimetre square ) including filling the joints with approved adhesive complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
8
-
-
... More
Steel work welded in built up sections (TATA/SAIL Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In trusses, purlins, rafters, grating, framed guard bars ladders, railing, brackets and similar works including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
111.24
-
-
... More
Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet roofing over steel trusses TATA/SAIL Make. Prepainted single skin rapezoidal profile sheeting 0.60mm ht. (Zero poiint sixty millimetre height) having 1060mm (One thousand sixty millimetres) cover width (overall width 1126mm (One thousand one hundred twenty six millimetres) 28mm (Twenty eight millimetres) crest depth at 353+2 C/C crest distance. There will be two ribs at the center for stiffening having depth of 2.5mm (Two point five millimetres). The main crest width at top of 25mm (Twenty five millimetres) & at the lower 81mm (Eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coat with regular modified polyester coating of approved shade & balancing reverse coat with polyester paint. Fixing of sheet shall be with self drilling & self tapping screws of size 5.5mm (Five point five millimetres) dia 5.5mm (Five point five millimetres) length with EDPMC seal. The material supply will be accompanied by test certificate & 20 years warranty from company against corrosion fading of colour and manufacturing defects. The shade and sample of prepainted sheet shall be got approved from the Engineer-in-Charge with all accessories as required as per the direction of Engineer-in-Charge in all heights complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
438.32
-
-
... More
Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets TATA/SAIL Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyesters organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
31.66
-
-
... More
Providing and fixing valleys 60cm (Sixty centimetres) (overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/SAIL Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of back coat of polyesters of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts & nuts 6mm (Six millimetres) dia with prepainted G.I. limpet & bitumen washers complete with all accessories as required in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
15.2
-
-
... More
Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point sixty six to two millimetres) thick TATA/SAIL Make in eaves board, facia, soffits, ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per instruction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
158.04
-
-
... More
Providing and fixing 8mm (Eight millimeters) thick cement bounded board (Bison board) in ceiling of approved quality with butt jointing and screws (framed work and cover fillets to be measured and paid for separately) complete as per instruction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
50.54
-
-
... More
Providing and fixing 0.80 mm (Zero point eight zero millimetre) thick galvanized iron Sheet TATA/SAIL Make 15cm (Fifteen Centimeter) wide 45 cm (Forty Five Centimeter) over all semicircular plain galvanized iron Sheet gutter with iron brackets 40x3mm (Forty into Three Millimeter) size bolts and nuts and washers etcetera including making necessary connection with rain water pipe complete as per design within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials in all leads and lifts and including all incidentals.
74.62
-
-
... More
Applying priming coat (ASIAN/NEROLAC) over new steel and steel surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter scoured with wire brushes fine steel scrapers and sand paper complete with ready mixed Priming paint brushing red lead,Red -oxide /zinc oxide chorme upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge including all incidentals.
586.61
-
-
... More
Applying priming coat (ASIAN/NEROLAC) on new concrete/masonry/asbestos cement plaster surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
50.54
-
-
... More
Painting two coats (ASIAN/NEROLAC) (excluding priming coat)on new concrete /masonry/plastered surfaces with enamel paint of approved brand and manufacture for use on floors to give an even shade,including cleaning of all dirt,dust and other foreign matter and sand papering as required including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge including all incidentals.
50.54
-
-
... More
Providing and fixing 90cm (Ninety centimeter) mild steel high hand rail supported on 60x6mm (Sixty into six millimeter) flat 40mm to 20mm (Forty milimetre to twenty millimeter) spun bar 28cm (Twenty eight centimeter) center to center upper welded with flat and lower to mild steel lugs of 20mm (Twenty millimeter) square bars embedded in RCC steps works slab including painting the iron work complete as per design including entire carriage of material with in all leads and lifts and as per standard approved drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
14.7
-
-
... More
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter coarse sand papering and knotting ready mixed paint brushing wood primer pink ( ASAIN/NEROLAC ) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
550.29
-
-
... More
Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with white enamel paint (ASAIN/NEROLAC complete within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials in all leads and lifts and including all incidentals.
550.29
-
-
... More
6mm (Six millimetres) cement plaster to ceiling in cement mortar 1:4 ( One cement : four coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
717.77
-
-
... More
15mm (Fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
1781.2
-
-
... More
15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:6 (One cement : six coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
764.16
-
-
... More
15mm (Fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers, grooves and/or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth in cement mortar 1:4 (One cement : four coarse sand) upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
41.86
-
-
... More
Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture ( ASAIN/NEROLAC) after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and coarse sand papered smooth priming coat with distemper primer upto all floor level in all heights including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge including all incidentals.
2498.97
-
-
... More
Applying Birla white wall care putty of avrage thickness of 1mm ( one milimetre ) over plastered surfaces after thoroughly brushing the surface free from mortar dropping, dust, loose materials and other foreign matter coarse sand papered smooth to give fine finish to the surface complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
2498.97
-
-
... More
Finishing wall with water proofing exterior grade emulsion of approved design (Apex Ultima Asian Paints) or its equivalents on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etc. including coarse sand papered smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
764.16
-
-
... More
Providing plinth protection 50mm (Fifty millimeters) thick in cement concrete 1:3:6 (One cement : three coarse sand : six graded crushed stone aggregate 20mm (Twenty millimeters) nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
51.91
-
-
... More
Providing under layer for plinth protection of 75 mm (Seventy five millimeters) thick (unconsolidated) bed dry brick/stone aggregate 40mm (Forty millimeters) nominal size with rammed and consolidated and grouted with fine coarse sand including preparation of ground including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
51.91
-
-
... More
Constructing course rubble hammer dressed ‘U’shape open surface drain with side wall 15x22 cms (Fifteen into twenty two centimeters) in cement mortar 1:6 ( One cement : six coarse sand) and inside plastering with cement plaster 1:3 ( One cement : three coarse sand) including earth work and laying 10cm (Ten centimeters) cement concrete in 1:5:10 ( one cement : five coarse sand : ten graded crushed stone aggregate 40mm (Forty millimeters) nominal size) and 7.5 cm (Seven point five centimeters) cement concrete 1:2:4 ( One cement : Two coarse sand : four graded crushed stone aggregate 20mm (Twenty millimeters) nominal size and finished with a floating coat of neat cement complete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
69.22
-
-
... More
WATER SUPPLY AND SANITARY INSTALLATION
-
-
-
... More
Providing and fixing vitreous China wash down water closet (European Type W.C. Pan) with integral P or S strap including jointing the trap with soil pipe in cement mortar 1:1 ( One cement : One coarse sand) seat and cover to be measured and paid for separately ( Hindware/Parryware /CERA make ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
12
-
-
... More
Providing and fixing 10.00 (Ten litres) viterous china white flushing cistern of I.S.I. marked of Cera/ Hindware/Parryware with a pair of C.I. or mild steel brackets complete with fitting such as lead valve, syphon 15mm (Fifteen millimetres) nominal size brass/PVC ball valve with polythene float, with push button unions and couplings for connection with inlet and outlet and over flow pipe 40mm (Forty millimetres) dia CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
12
-
-
... More
Providing and fixing soft closing plastic seat (solid/Hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers solid type white plastic seat and cover of cera /Hindware/Parryware make made including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
12
-
-
... More
Providing and fixing 550mmx400mm (Five hundred fifty into four hundred millimetres) vitreous china wash basin with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings of case or its equivalent flat back of Cera/Hindware/parryware including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
12
-
-
... More
Providing and fixing 32mm (Thirty two millimeters) dia of approved make PVC Finolex/D-Plast waste for wash basin or sink complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
36
-
-
... More
Providing and fixing galvanized iron inlet connection for flushing pipe with W.C. pan including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.
12
-
-
... More
Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden plugs with CP brass screws 600 x 20mm (Six hundred fifty into twenty millimeters) Jaquar/CERA/Czar including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.
12
-
-
... More
Providing and fixing 600mmx450mm (Six hundred into four hundred fifty millimetres) bevelled edge mirror ( Exotica make ) of superior glass mounted on 6mm (Six millimetres) thick Asbestos cement sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
12
-
-
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore brass full way valve with wheel (heavy duty) of approved make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
6
-
-
... More
Providing and fixing brass quarter turn stop cocks 15mm (Fifteen millimetres) dia of Jaquar ( OPAL Series) or its equivalent in Hindware/Jal including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
24
-
-
... More
Providing and fixing brass quater turn 15mm (Fifteen millimetre) dia CP brass angle valve including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
36
-
-
... More
Providing and fixing CP Brass pillar tap quater turn 15mm (Fifteen millimetres) dia of Jaquar ( OPAL Series) or its equivalent in Hindware/Cera including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
12
-
-
... More
Providing and fixing CP brass bib tap with long body quarter turn 15mm (Fifteen millimetres) dia of Jaquar ( OPAL Series) or its equivalent in Hindware/Jal including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
24
-
-
... More
Providing and fixing PVC connections pipe with brass unions 45cm (Forty five centimetres) length 15 mm (Fifteen millimetres) nominal bore heavy duty including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
12
-
-
... More
Providing and fixing chromium plated brass soap dish (ACN-1131N) with CP brass brackets fixed to wooden cleats with CP brass screws etc. of Jal/Jaquar or Hindware complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
12
-
-
... More
Providing and fixing CP brass shower rose (Jal/Jaquar or Hindware) with 15mm (Fifteen millimetre) or 20mm (Twenty millimetre) inlet 150mm (One hundred fifty millimetre) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and other incidentals.
12
-
-
... More
Providing and fixing drainage board vitreous china 600mm×450mm (six hundred milimeter into four hundred fifty milimeter) in size including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge and other incidentals.
6
-
-
... More
Providing and fixing 20mm (Twenty millimetres) nominal bore to wall ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal/Tata Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
90
-
-
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore to wall ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal/Tata Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
150
-
-
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40mm (Twenty milimeter to Forty milimeter) nominal bore by providing and fixing tee including cutting and threading the pipes complete including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge and other incidentals.
8
-
-
... More
Providing and fixing PVC water storage tank of Sintex make (I.S.I. marked five layer) 1000 (One thousand) litre capacity with 40mm (Forty millimetres) nominal size bore galvanized mild steel scour tube with fittings 25mm (Twenty five millimetres nominal bore) galvanized mild steel overflow pipe with fittings and mosquito proof coupling of approved design 15mm (Fifteen millimetres nominal bore ball valve and mosquito proof PVC cover with locking arrangement including providing pads of required size of inlet or outlet, compete in all respect including hoisting upto all heights above ground level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and other incidentals.
6
-
-
... More
Providing and fixing stainless steel kitchen sink of approved quality (Diamond/ Prayag/Cera) ISI marked drain board and CP waste with CI or MS bracket painted white including cutting holes and making good the same but excluding of fitting 610mmx510mm (Six hundred ten into five hundred ten milimetre) with boul depth 200 mm (Two hundred millimetre) of Cera/Jindal made including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
6
-
-
... More
Providing and fixing 25mm (Twenty five millimetres) nominal bore to wall ceiling and floor galvanized mild steel tubes (Medium Grade) of Jindal/Tata Make tube fitting and clamps including making good the wall ceiling and floor upto all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
50
-
-
... More
Providing and fixing 110mm(One hundred ten millimetres) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) comlete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
140
-
-
... More
Providing and fixing 90mm(Ninety millimetres) dia high pressure PVC spigot and socket, waste and ventilating pipe I.S.I marked Finolex/ Supreme working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) comlete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
155
-
-
... More
Providing and fixing plain bend 110mm (One hundred ten millimetres) nominal size PVC single equal branch with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete PVC Finolex/ D-plast pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
6
-
-
... More
Providing and fixing plain bend 90mm (Ninety millimetres) nominal size PVC single equal branch with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete PVC Finolex/ D-plast pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
6
-
-
... More
Providing and fixing 110mm (One hundred ten millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three milimetre) thick bolts and nuts ISI marked complete PVC Finolex/ D-plast pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
8
-
-
... More
Providing and fixing Plain bend 90mm (Ninety millimetre) nominal size PVC door bend with oval access door, insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete PVC Finolex/D-plast pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
8
-
-
... More
Providing and fixing 110mm (One hundred ten millimetres) nominal size PVC single equal branch plain complete PVC Finolex/ D-plast pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
56
-
-
... More
Providing and fixing 90mm (Ninety millimetres) nominal size PVC single equal branch plain complete PVC Finolex/ D-plast pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 ISI marked including fixing with approved adhesive etcetera complete upto all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
62
-
-
... More
Providing and fixing PVC Finolex/ D-plast pipe working pressure not less than 6 kg/ square centimetre (six kilogram per square centemtre) confirming to IS 13592 Cowl 100mm(One hundred millimetres) nominal size including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge and including other incidentals.
2
-
-
... More
Providing and fixing 110mm(One hundred ten millimetres) dia PVC clamp of approved design with steel screws and rawl plugs comlete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
12
-
-
... More
Providing and fixing 90mm (Ninety millimetres) dia PVC clamp of approved design with steel screws and rawl plugs comlete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
8
-
-
... More
Providing and fixing 110x90mm ( One hundered ten into Ninety millimeters) nominal diametre PVC Finolex/Supreme floor trap I.S.I. marked of self cleaning design including fixing with coarse sand cast iron screwed down or hinged grating with out vent arm complete including cost of cutting and making goods the walls and floors upto all floor level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
18
-
-
... More
Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate ) 20mm (Twenty millimeters) nominal size foundation concrete 1:4:8 ( One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimeters) nominal size) inside plastering 15mm (Fifteen millimeters) thick with cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimeters nominal size) finished smooth complete in all respect including curing and testing Inside size 800mmx800mmx500mm (Eight hundred into eight hundred into five hundred millimetres)) deep including cast iron cover with frame (Light duty single seal : Pattern) 455mmx 610mm (Four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38kg (Thirty eight kilogramme) weight of cover 23kg (Twenty three kilogramme) and weight of frame 15 kg (Fifteen kilogramme) with 200mm (Two hundred millimeters) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.
3
-
-
... More
Constructing manhole with RCC top slab in 1:2:4 mix (One cement : two coarse sand : four graded/crushed stone aggregate) 20mm (Twenty millimetres) nominal size foundation concrete 1:4:8 (One cement : four coarse sand : eight graded/crushed stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : three coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 ( One cement : two coarse sand : four graded/crushed stone aggregate 20mm (Twenty millimetres nominal size) finished smooth complete in all respect including curing and testing Inside size 1200x900 and 1000mm (One thousand two hundred into nine hundred and one thousand millimetres) deep including cast iron cover with frame (Medium duty) 500mm (Five hundred millimetres) internal diametres total weight of cover and frame to be not less than 116kg (One hundred sixteen kilogramme) (weight of cover 58kg (Fifty eight kilogramme) and weight of frame 58 kg (Fifty eight kilogramme) with 200mm (Two hundred millimetres) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( One cement : three coarse sand) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
2
-
-
... More
Providing and fixing stone ware gully trap grade ‘A’ complete with CI grating brick masonry chamber in cement mortar 1:5 (One cement : five coarse sand) and water tight C.I. cover with frame of 300 x 300mm (Three hundred into three hundred millimetres) size (inside) the weight of cover to be not less than 4.53kg (Four point five three kilogramme) and frame to be not less than 2.72 kg (Two point seven two kilogramme) square mouth trap 100x100mm (One hundred into one hundred millimetres) size P-Type including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.
6
-
-
... More
Supplying and fixing cast iron cover with frame for manhole cast iron cover and frame 455x610mm(Four hundred fifty five into six hundred ten millimeters) (Light duty single seal pattern-I) internal dimensions total weight of cover and frame to be not less than 23kgs(Twenty three kilogramme) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements