Public Works Department Tender

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading 25mm (Twenty Five millimetre) compacted thick with bituminous binder VG-30 (Viscosity Grade-thirty) @ (at the rate of) 5.50% (five decimal five zero percent of total mix weight) and lime filler 2% (percentage by weight of Aggregate), with minimum 100-120 TPH capacity (hundred- one hundred twenty tonne per hour) hot mix batch type/drum type plant with electronic control, transported to site, laid with censor paver finisher hydraulic with censor control to the required grade, level and alignment over a previously prepered surface and rolling complete with smooth wheeled roller 8-10 (Eight-Ten) tonne capacity for initial break down rolling and vibratory roller 8-10 (Eight-Ten) tonne capacity or pneumatic type roller of 12-15 (Twelve-fifteen Tonne) with tyre pressure of atleast 0.56mpa (Zero point five six ) for intermediate rolling and finish rolling with 6-8 (six-eight) tonne smooth wheeled tandom roller to achieve the desired compaction as per CPWD specification 2019, complete and as per directions of Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government. .

Providing and laying of hot applied thermoplastic compound 2.5mm (two point five millimeter) thick and 0.10 (zero decimal one zero) meter wide strip in centre line and 0.30 (zero decimal three zero) meter wide strip in zebra crossing including reflectorising glass beads @ 250 gms (two hundred fifty grames) per square meter area, thickness of 2.5mm (two decimal five millimeter) is exclusive of surface applied glass beads as per IRC: 35 (thirty five) in accordance with ministry of road transport specifications (Latest revision) and IRC code the finished surface to be level, uniform and free from strasks and holes as per MORTH technical specification section 800 and as per the directions and entire satisfaction of the Engineer-in-Charge including carriage of all labours, equipments and materials to various location through all modes of tranpottation in all leads , lifts and all incidental charges. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.