Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Nov 2024
Closing Date27 Nov 2024
Tender Amount₹ 1,69,78,445
Costs
EMD
₹ 3,39,600Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Veterinary Polyclinic Building At Shahpur In Tehsil Shahpur, Distt. Kangra Himachal Pradesh.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_95413_1Bid Award Id
ViewTender No
4583-4632 dt 14-11-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
536.07
610
327056.31
... More
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
694.65
533
370665.24
... More
Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
417.78
692
289229.09
... More
Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
14.63
624
9130.58
... More
Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
173.8
182
31753.26
... More
Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in weather shade chajjas, corbels etc including edges within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
14.88
773
11506.7
... More
Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in window sills, string courses, bands, copings, bed plates, anchor blocks and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6.61
275
1820.39
... More
Providing and laying cement concrete 1:4:8 (One cement isto Four sand isto Eight graded broken/crushed stone aggregate 40mm (Forty milimetres ) nominal size and down gauge) mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
103.93
5149
535156.36
... More
Filling in plinth with stone filling under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
71.56
779
55752.4
... More
Coursed rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints with cement mortar 1:6 (One cement isto Six sand) and curing complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
86.31
6388
551417.33
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 ( M- twenty) design mix to obtain the compressive strength of 20N/mm 2 (twenty newton per Square milimetre) for reinforced cement concrete work, using cement with cement content not less than @ 360 kg/cum. ( three hundred sixty kilogram per cubic metre) or as per approved design mix for all work upto plinth level to give a smooth surfaces mechnically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
66.08
8106
535697.34
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 ( M- twenty ) design mix to obtain the compressive strength of 20N/mm 2 (twenty newton per Square milimetre ) for reinforced cement concrete work, using cement contents not less than @ 330 kg/cum. ( three hundred thirty kilogram per cubic metre) and as per approved design mix for all work above plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax or any taxes imposed by the Government.
216.5
9232
1998922.85
... More
Providing Tor steel reinforcement of Sail / Tisco /Tata for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete for all floors within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
43258.95
107
4633033.55
... More
Providing and laying Damp Proof Course 100mm (One Hundred milimetres) thick with cement concrete 1:2:4 (one cement: two sand: four graded crushed stone aggregate 12.5mm (Twelve decimal five milimetres nominal size) and curing complete, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
56.42
282
15955.58
... More
Applying a coat of hot bitumen mexphalt 80/100 (Eighty/Hundred) 1.70 Kgs. (one decimal seventy Kilogram’s) per square metre. On Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil; within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
56.42
156
8824.09
... More
Second class half brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (one cement :four sand) within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
106.79
1020
108925.8
... More
Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete,within all leads, lifts of materials and other incidentals, as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
153.34
8827
1353608.85
... More
Providing and fixing coloured anodised aluminum ( andoised tranparent or dyed to required shade according to IS :1868, Minimum anodic coating of grade AC 15) sub frame work for door, windows and ventilators of section No. 14081 of Jindal/ Hindalco with extruded built up standard tublar sections fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government
1295.57
420
544398.51
... More
Providing and fixing coloured aluminium shutter work Jindal/ Hindalco for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 (fifteen) within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government. ge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government
1235.99
501
619725.39
... More
Providing and fixing Fly proof shutters for doors, windows and clerestory windows stainless steel grade 304 with M.S. flat 15X3mm (fifteen into three milimetre) wire gauge with 0.5 mm dia (zero decimal five milimetre) diametre wire and 1.4mm (one decimal four milimetre) wide aperture on both sides complete including carriage of material within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.
27.64
957
26473.59
... More
Providing and fixing 8 mm (Eight milimetre) anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm ( two hundred milimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. (Only weight of grill to be measured for payment).complete including carriage of material within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.
114.43
476
54537.34
... More
Providing and fixing 12mm (Twelve millimetre) thick Phenol Bonded (Both Sides) Prelaminated BWP Grade Partical Board in Matt Finish Flat pressed three layeror graded wood partical board conforming to IS No. 12823 of action Tesa/ Greenlam/ Merinolam/Kitlam/Vista as per ISI and approved shade Grade-I type-II in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetra complete as per PWD specification, drawing and design. and entire satisfaction of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the Government.
50.22
1029
51701.49
... More
Providing and fixing factory made 30mm (Thirty millimetres) thick factory made PVC panelled door shutter of RAJSHRI (Code No 9.120) consisting of frame made out of M.S. tubes of 19 (Nineteen) gauge thickness and size of 19mm x19mm (Nineteen into nineteen millimetres) for styles and 15mmx15mm (Fifteen into fifteen millimetres) for top & bottom rails, code 9.120 of Rajshri M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm (Five millimetres) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetres) thickness, 70mm (Seventy millimetres) width out of which 50mm (Fifty millimetres) shall be flat and 20mm (Twenty millimetres) shall be tappred in 45 (Forty five ) degree angle on either side forming style and 5mm (Five millimetres) thick, 95mm (Ninety five millimetres) wide, PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen) wide PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetres) thick, 20mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm ( One hundred into fifty into one decimal ninety millimetres) size with necessary screws etc complete as directed by the Engineer-in-Charge.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
9.45
3302
31209.57
... More
Providing and fixing 25mm (twenty five millimetre) thick water proof terminate resistant commercial board Century/Alpro/ Novapan/Kitply/ National or equivalent in shutters for SDB/cup boards with 6 mm (six millimetre) thick hard wood edging all round and PGI sheet lining in side i/c fixing with nickel plated piano hinges with screws etc complete) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government.
3.84
2898
11128.7
... More
Providing and fixing glazing With float glass panes of 6 mm ( Six milimetres) thick (weight not less than 15.00kg/square metre) of modi guard/saint gobain/AIS/Atul/Gold Plus in door, windows, ventilators shutter and partitions with EPDM rubber/Neoprene gastet etcetera as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
21.95
1381
30323.93
... More
Providing and fixing glazing With float glass panes of 5 mm ( Five milimetres) thickness (weight not less than 12.50kg/square metre) of modi guard/saint gobain/AIS/Atul/Gold Plus in door, windows, ventilators shutter and partitions with EPDM rubber/Neoprene gastet etcetera as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
50.7
1299
65859.3
... More
Providing and fixing Glazing with frosted glass panes 4mm (Four milimetre) thickness glass panes (weight not less than 10.00kg/square metre) of modi guard/saint gobain/AIS/Atul/Gold Plus in door, windows, ventilators shutter and partitions with EPDM rubber/Neoprene gastet etcetera as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6.83
1335
9121.47
... More
Providing and fixing 20 mm (twenty millimetres) dia stainless steel curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete as per approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.
21
510
10722.6
... More
Providing and fixing 300x16mm (Three hundred into Sixteen milimetres) size Pilot/sheel anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
22
266
5868.72
... More
Providing and fixing aluminium Pilot/sheel anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) as approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
250x10mm (Two hundred fifty into Ten milimetres) size
44
94
4136
... More
150x10mm (One hundred fifty into Ten milimetres) size
120
78
9444
... More
Providing and fixing aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade and of approved make with necessary screws etc. handles with the necessary screws etc. complete. within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
150mm (One hundred fifty milimetres) size
50
73
3670
... More
125mm (One hundred twenty five milimetres) size
80
66
5304
... More
Providing and fixing 200mm size aluminium hooks and eyes complete in all respect , within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
72
87
6292.8
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg ( thirty five kilogram) and door width upto 700 to 1000 mm ( seven hundred to one thousand milimetres), with necessary accessories and screws etc. complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government. other taxes imposed by the Government.
25
1045
26135
... More
Providing and fixing aluminium hanging floor door stopper, Twin rubber stopper ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
25
65
1635
... More
Providing and fixing the complete box of cup board sahll be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers,knob megnatic catcher complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4.1
5590
22922.69
... More
Providing and fixing 18 mm (Eighteen milimetre) thick polished Grey / cheema pink Granite has per pattern and detail gang saw cut, mirror polished, premoulded and prepolished, machine cut in flooring and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
47.43
4399
208687.26
... More
Providing and fixing 19 mm (Nineteen milimetre) thick polished Grey / cheema pink Granite has per pattern and detail gang saw cut, mirror polished, premoulded and prepolished, machine cut in skirting and similar locations of required size of approved shade, colour and texture laid over 12 mm (Twelve milimetre) thick base of cement mortar 1:3 (1 cement : 3 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
4.58
4314
19759.95
... More
Providing and laying Size of (600x 600mm) (Six hundred into Six hundred milimetre) Double charged/Ultra charged vetrified tiles of Restile/Nitco /Rak/Kajaria / Orient -Bell/AGL/Simpolo /Johnson/Somany/ Orient & Bell as per approved shade and design of the office in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty milimetres) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per squaremetre) including grouting the joints with white cement and matching pigments etc., complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
23.22
1549
35988.68
... More
Providing and laying Size of (600x 600mm) (Six hundred into Six hundred milimetre) Double charged/Ultra charged vetrified tiles of Restile/Nitco /Rak/Kajaria / Orient -Bell/AGL/Simpolo /Johnson/Somany/ Orient & Bell as per approved shade and design of the office in skirting (thickness to be specified by the manufacturer) with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty milimetres) thick cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three decimal three kilogram per squaremetre) including grouting the joints with white cement and matching pigments etc., complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2.32
1745
4048.4
... More
Providing and fixing 25mm (twenty fivemillimeters) thick Kota stone mirror slab flooring 55X55cm (Fifty five into Fifty five centimetre) size with Jaishmer band 7.50cm (Seven point five zero centimetre) wide/ internal; desigening in the ratio of 70% % 80% as per detail over 20 mm (Twenty milimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
241.41
1618
390794.51
... More
Providing and fixing 25mm (twenty fivemillimeters) thick Kota stone mirror slab flooring 55X55cm (Fifty five into Fifty five centimetre) size with Jaishmer band 7.50cm (Seven point five zero centimetre) wide/ internal; desigening in the ratio of 70% % 80% as per detail over 12 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 3 (1 cement : 3 coarse sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
8.46
1793
15173.86
... More
Providing and fixing 25mm (twenty fivemillimeters) thick Kota stone of 55X55cm (Fifty five into Fifty five centimetre) size of rough side same flooring of approved shade as per detail slab in flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
99.89
1448
144650.71
... More
Providing and fixing 25mm (twenty fivemillimeters) thick Kota stone of 55X55cm (Fifty five into Fifty five centimetre) size of rough side same flooring of approved shade as per detail slab in skirting over 12 mm (Twelve milimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 3 (1 cement : 3 coarse sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
9.72
1561
15175.84
... More
Providing and fixing 25 mm (twenty fivemillimeters) thick Granite stone slab on counter top/ work top having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for work top with semi nosing of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
7.44
4754
35373.48
... More
40mm (forty milimetres) thick cement concrete flooring 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and down gauge) laid in one layer finished with a floating coat of neat cement within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government.
8.34
471
3929.81
... More
Providing and laying 25mm thick mirror polished kota stone in Single slab with round noising in skirting/ dado laid on 12mm ( twelve millimeters ) thick in cement mortar 1:3 ( one cement is to three sand and jointed with grey cement slurry with pigment to match the shade of the kota stone i/c rubbing and mirror polishing complete within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
41.4
1793
74255.04
... More
Providing and laying 300X450 mm (three hundred into four hundred fifty millimetre) white glazed tile of Premimum quality of Nitco/ Kajaria/ /Johnson/ AGL/ Somany/ Orient Bell in Dado/Skirting over 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
106.87
1261
134773.76
... More
Providing and laying 200X300 mm (two hundred into three hundred fifty millimetre) white Glazed tile of Premimum quality of Nitco/ Kajaria/ /Johnson/ AGL/ Somany/ Orient Bell in Dado/Skirting on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
166.7
1261
210225.37
... More
Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of Tata Durashine/ Sail / Reliance / Jindal steel in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer fixing with prepainted iron J or L hooks,bolts and nuts with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
129.58
1772
229615.76
... More
Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick prepainted steel sheet ISI marked - Z 120 of approved make in ridges of Sail / Relience / Jindal /Tata Durashine with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other. incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
27.5
1011
27821.75
... More
Providing and fixing valleys 90 cm (ninety centimetres) over all over all with 0.60mm (Zero decimal Six zero milimetres) thick prepainted sheet ISI marked - Z 120 of Sail / TATA / Relience / Jindal steel roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (five) micron primer coating, back coat of polyster of 5 (Five) microns including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
10.5
1158
12159
... More
Providing and fixing 30cm (thirty centimeters) wide 25cm (twenty five centimeters) deep of Tata/ Sail / Jindal Steel 0.60mm (Zero decimal Six zero milimetres) thick plain G.I. gutter with iron brackets 40x3mm (Forty into Three milimetres) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe and providing complete accesories within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
17.2
694
11949.7
... More
Providing and fixing plain M.S. B.P. sheet of TATA/SAIL/JINDAL steel 2.00 mm (Two decimal zero millimeter) thick fixed in eaves board / facia / soffits /ceiling including cutting, fixing and welding to steel rafter, member and applying a coat of red lead primer with gas/ electric welding in position complete (frame work is to be measured and paid for separately) within all leads, lifts of materials and other. incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
17.2
1934
33271.68
... More
Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata / sail / Reliance / Jindal with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.
38.45
833
32055.77
... More
Providing and fixing on wall face 150mm (One hundred fifty milimetres) diametres P.V.C. rain water pipes of working pressure 4.6kg (four / six kilogramme) per square centimetre of finolex / Relience / vectus/ prince pipe for rain water pipe fixed with approved adhesive including filling the joints complete within all leads, lifts of materials and other incidentals, and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
95.7
654
62597.37
... More
Providing and fixing on wall face 150 mm (One hundred tenfifty millimetre) diametre plain bend Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Prince /Relpipe (reliance)/ vectus including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
20
256
5122
... More
Providing and fixing on wall face 150 mm (One hundred tenfifty millimetre) diametre shoe Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Prince /Relpipe (reliance) vectus including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
12
239
2869.2
... More
Providing and fixing unplasticised PVC Pipe clips / Clamps of Supreme/Finolex/ Prince/Relpipe (reliance)vectus of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty by Fifty by Fifty milimetres) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.
45.8
258
11834.72
... More
Steel work welded in built up sections of TATA/SAIL joists channels, angles, tees with connection plates or angles, cleat as in trusses, trussed purlins main and cross beams, hips jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and; placing in position complete and applying a coat of red lead paint, within all leads, lifts of materials and other incidentals. as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1916.32
115
221909.86
... More
Providing and laying Dr. Fixit torch shield (IP-3160-3mm) shall be used for water proofing treatment on terrace/depressed portion membrances are made from high grade bitumen and selected polymers, APP/SBS modified bitumen thin coated to non-woven polyster reinforcement to give high care and puncher resistance. The application shall be done as per Architectural drawing, specification within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
46.44
469
21803.58
... More
Providing and fixing hand rail of 50 mm (fifty milimetres) dia SST stainless steel pipe handrail fixed with 35 mm ( thirty five milimetres) diametre sst pipe as per detail in combination of 35 mm ( thirty five milimetres) SST square pipe and 15 /20 mm ( fifteen/ twenty milimetres) SST(Stainless steel) pipe three row between step and railing in equal space and jointed with electic gas welding at top along wth 50mm(fifty milimetres) diametre hand rail jointing in steps as per approved drawing, design and specification and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidental.. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
345.6
592
204837.12
... More
Providing and fixing SST hand railing for ramp for Divyang withl 50mm (fifty milimetres) Dia. SST (Stainless steel) Pipe handrail slip resistant with round ends at two levels at 75 Cm (Seventy five centimetres) and 90cm (Ninety centimetres) height and extended 30cm (Thirty centimetres) beyond the top and bottom of the ramp. The hand should be fixed on 15x50mm of stainless steel baluster placed st 120mm (One hundred twenty milimetres) centre to centre including welding, grinding, buffering, polishing and making the good as per approved architectural drawing, design and specification and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidental.. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
86.4
592
51209.28
... More
Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing of Asian paint/ Nerolac/Berger of approved shade to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter enamel paint other than white within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
34.4
115
3986.96
... More
Painting two or more coats of Nerolac/Asian paint/ Berger (excluding priming coat) on new wood and wood based surface with enamel paint other than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering and stoping within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
123
120
14833.8
... More
Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and cost and carriage of material as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
86.53
2180
188713.28
... More
6mm (Six milimetres) thick cement plaster in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights within all leads, lifts of materials and other incidentals as per approved approved specification, drawings and design. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
376.96
206
77729.15
... More
Providing and fixing 595 X 595 X6 mm (Five hundred Ninety five into Five Hundred Ninety five hundred into six millimetre) designer board of Everest (E-board) ceiling with pre-panled G.I. Channel framing @ 600mm (six hundred millimetres) C/C including of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
33.97
2687
91280.79
... More
15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
459.84
264
121811.62
... More
15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
459.84
261
120386.11
... More
15mm (Fifteen milimetres) thick cement plaster in single coat on fair side of brick/concrete/ stone walls for exterior plastering upto two floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:4 (One cement isto four sand) within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
609.18
282
171788.76
... More
Forming groove of uniform size 15mm wide and 15mm deep groove in top layer of washed stone grit plaster as per approved pattern using wooden batterns, nailed to the under layer including removal of wooden batterns, repair to the edges of panels and finishing the groove complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
100.8
53
5372.64
... More
Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1905.82
106
202207.5
... More
Finishing walls with Apex weather proof exterior emulsion paint of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point Nine zero litre per ten square metre) complete as per Architectural drawing ,design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
522.65
149
77979.38
... More
Painting (two coats) with acrylic distemper with Nerolac/ Asian paints of approved brand and manufacture and of required shade on ceiling/sloping roof surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth.Priming coat with distemper primer within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1153.55
118
136810.44
... More
Painting with satin enamel of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm (One point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (zero point seventy five litre per ten square metre) of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
225.09
154
34686.37
... More
Providing Plinth protection with 40 mm (forty millimetre) thick interlocking paver blocks of NTC with 23 cm (twenty three centimetre) dia. Half round R.C.C. pipe for drainage purpose laid base over of 10 cms ( ten centimetre) thickness cement concrete 1:4:8 (one cement isto four sand isto eight graded / crushed stone aggregate) 40mm (forty millimetre) nominal size for bedding of pipe complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
45.67
2075
94792.65
... More
Painting two coats (excluding priming coat)on new concrete /masonry/plastered surfaces with interior emulsion of approved brand Asian/ Nerolac/Burger paint and manufacture for use on floors to give an even shade,including cleaning of all dirt,dust and other foreign matter and sand papering as required within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
25
1353
33830
... More
Providing and fixing polythelene aluminum polythelene (PE- AL-PE) composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 15450-2004 of Kitec for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work), including filling the joints with approved adhesive complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
1620 (20mm) twenty millimeter diameter pipe O.D. pipe
115
457
52566.5
... More
2025 (25mm) twenty five millimeter diameter pipe O.D. pipe
143
534
76490.7
... More
Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
628
628.5
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked of fenolex/vectus/price 4.6mm thick having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etc. complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
150mm (One hundred fifty milimetres) diametres
50
654
32705
... More
110mm (One hundred ten milimetres) diametres
82
447
36715.5
... More
75mm (Seventy milimetres) diametres
24
298
7159.2
... More
Providing and fixing cast iron P.V.C. holder bat clamps ISI marked of approved drawing i/c/ steel screw and rawl plug etc. including entire carriage of materials within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
150mm (One hundred fifty milimetres) diametres
40
249
9968
... More
110mm (One hundred ten milimetres) diametres
47
242
11378.7
... More
75mm (Seventy milimetres) diametres
16
235
3760
... More
Providing and fixing P.V.C. I.S.I. marked heal rest of Finolex / Supreme / Prince including filling the joints with including fixing with approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
150mm (One hundred fifty milimetres) diametres
4
130
523.6
... More
110mm (One hundred ten milimetres) diametres
4
123
495.2
... More
Providing and fixing P.V.C. Collar ISI marked of Finolex / Supreme / Prince including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
150mm (One hundred fifty milimetres) diametres
12
249
2990.4
... More
110mm (One hundred ten milimetres) diametres
15
185
2775
... More
75mm (Seventy milimetres) diametres
3
113
341.4
... More
Providing and fixing P.V.C. I.S.I. marked cowl (confirming to BIS-14735-99) ISI marked of Finolex / Supreme / Prince including fixing with approved adhesive complete, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
75mm (Seventy five milimetres) diametres
2
106
213.4
... More
Providing and fixing P.V.C. I.S.I. marked plain bend of Finolex / Vectus / Prince including filling the joints with including fixing with approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
150mm (One hundred fifty milimetres) diametres
20
256
5122
... More
110mm (One hundred ten milimetres) diametres
17
199
3386.4
... More
75mm (Seventy milimetres) diametres
3
113
341.4
... More
Providing and fixing P.V.C. (polyvinyl chloride) Supreme/ Finolex/ Prince single equal branch plain tees Confirming to BIS-14735 (Fourteen thousnad seven hundred thirty five), ISI marked including fixing with approved adhesive etcetera complete within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
-
-
-
... More
150mm (One hundred fifty milimetres) diametres
8
761
6088.8
... More
110mm (One hundred ten milimetres) diametres
10
383
3833
... More
75mm (Seventy milimetres) diametres
3
405
1216.5
... More
Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap of Finolex / Supreme / Prince ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
8
1477
11816
... More
Providing and fixing 110 x 75mm (One hundred ten into Seventy five milimetres) P.V.C. I.S.I. marked floor trap of Finolex / Supreme / Prince ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
8
1334
10677.6
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm ( five hundred thirty into four hundred ten milimetres) with integral type foot rests with 100 mm ( one hundred milimetres) sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern,of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentalsThe rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
6317
12635
... More
Providing and fixing white vitreous china pedestal type water closet (European type) No 20087 (S - 10 ) Size 57 X 35 X 39 cm ( fifty seven into thirty five into thirty nine centimetres) with seat and lid, 10 (ten) litre low level white vitreous china flushing cistern (sleek Plus) Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty milimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid each as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
3
10170
30512.4
... More
Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 (ten ) litre low level white vitreous china flushing cistern Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( forty milimetres) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. . The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
10911
10911.4
... More
Providing and fixing white vitreous china flat back half stall urinal no 60002 of size 39 x 37.5 x 59 cm ( thrity nine into thirty seven decimal five into fifty nine centimetres) with white PVC automatic flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of one half stall urinals with 5 (five litre P.V.C. automatic flushing cistern each 10188.90 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
12318
12318.7
... More
Providing and fixing white vitreous china flat back half stall urinal no 60002 of size 39 x 37.5 x 59 cm ( thrity nine into thirty seven decimal five into fifty nine centimetres) with white PVC automatic flushing cistern of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of two half stall urinals with 5 (five litre P.V.C. automatic flushing cistern each 10188.90 as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
20170
40340.2
... More
Providing and fixing 600mmx300mm (six hundred into three hundred millimetres) white vitreous china Division plate of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details urinal with integral rim longitudinal flush pipe. as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
2129
4259.4
... More
Providing and fixing wash basin White Vitreous China Flat back wash basin Garnet no 10010 size 550x 400 mm ( five hundred fifty into four hundred ) ( Under counter Basin ) Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm ( Fifteen milimetres) C.P. brass pillar tap with C.I. brackets, 15 mm ( fifteen milimetres) C.P. brass pillar taps, 32 mm ( Thrity two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
5807
11614
... More
Providing and fixing wash basin White Vitreous China Flat back wash basin Garnet no 10080 size 580x 430 mm ( five hundred eighty into four hundred thirty) ( Under counter Basin ) Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm ( Fifteen milimetres) C.P. brass pillar tap with C.I. brackets, 15 mm ( fifteen milimetres) C.P. brass pillar taps, 32 mm ( Thrity two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
6176
24707.6
... More
Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x 400 mm ( five hundred ffity into four hundred milimetres) of Cera / Hindware / Jaquar with single 15 mm C.P. brass pillar tap with C.I. brackets, 15 mm ( fifteen centimetres) C.P. brass pillar taps, 32 mm (thirty two milimetres) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
7461
7461.5
... More
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink size 510 x1040 mm (Five hundred ten into One Thousand forty millimetre) with bowl depth 250 mm (two hundred fifty millimetre) of AMC unik / diamond approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted including cutting holes and making good the same but excluding fitting within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
6892
6892.3
... More
Providing and fixing 32mm (Thirty two millimetres) nominal size diametres rubber plug for wash basin within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6
79
478.8
... More
Providing and fixing 32mm dia (Thirty two millimetres) diametres M.I. union for wash basin or sink complete as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
306
1534
... More
Providing and fixing 15mm dia (Fifteen millimetres) diametres C.P. (chromium plated) brass sink Mixer of Continental series of Jaquar / Classik series of Hindware/ Floral series of Cera & Hindon series of Jal quality & make as per approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
3606
3606.4
... More
Providing and fixing 100mm (One hundred millimetres) diametres C.P. (Chromium plated) Grating ISI Marked IS No. 8934 (Eight thousand nine hundred thirty four) of Continental series of Jaquar / Classik series of Hindware/ Floral series of Cera & Hindon series of Jal for gully floor or Nahni trap as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
15
94
1414.5
... More
Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of Atul/ Modi Guard/ Goldex Fish of superior glass of approved quality complete with mounted on 6mm (Six millimetres) thick A.C. asbestos cement sheet or ply wood sheet and fixed to wooden plugs with C.P. (Chromium plated) brass screws and washers complete as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
1233
6168
... More
Providing and fixing 600mmx20mm (Six hundred millimetre into Twenty millimetres) C.P. (Chromium plated) ISI Marked IS No. 8934 (Eight thousand nine hundred thirty four) of Continental series of Jaquar / Classik series of Hindware/ Floral series of Cera & Hindon series of Jal brass Towel rail with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P.(Chromium plated) brass screws complete as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
593
2372.4
... More
Providing and fixing 600mmx120mmx5mm (Six hundred millimetres into One hundred twenty into five millimetres) glass shelf of ISI No. 8934 (Eight thousand nine hundred thirty four) of Continental series of Jaquar / Classik series of Hindware/ Floral series of Cera & Hindon series of Jal make brackets and guard rail fixed to wooden plugs with C.P.(Chromium plated) brass screws complete as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6
808
4852.2
... More
Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / Contess plus series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
570
2283.6
... More
Providing and fixing 8mm dia C.P. jet spray of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of approved quality and colour with one metre tube within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
565
2261.6
... More
Providing and fixing 15mm dia (Fifteen millimetres) diametres nominal bore chromium plated brass (ISI marked No. 8934) (Eight thousand nine hundred thirty four) bib tap (superior or heavy type) of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
25
957
23940
... More
Providing and fixing 15mm dia (Fifteen millimetres) diametres C.P. (chromium plated) brass stop cock Conforming ISI Marked IS No. 8934 (Eight thousand nine hundred thirty four) of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6
1028
6172.8
... More
Providing and fixing 15mm dia (Fifteen millimetres) diametres C.P. (chromium plated) push cock Conforming ISI Marked IS No. 8934 (Eight thousand nine hundred thirty four) of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
449
899.4
... More
Providing and fixing 15mm dia (Fifteen millimetres) diametres C.P. ( chromium plated) brass pillar tap with capstan head Conforming to IS: 8934 (Eight thousand nine hundred thirty four) of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
1099
2199.8
... More
Providing and fixing 15mm (Fifteen milimetres) diametres C.P.brass angle valve without nuts of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per approved drawing and design directed by the Engineer-in-Charge within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6
921
5527.8
... More
Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass full valve of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
590
2361.6
... More
Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
533
2134
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore PVC (polyvinyl chloride) connection pipe with brass union 30/ 45cm (Thirty or Forty five Centimetres) length, of Finolex, Reliance, Vectus complete as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
77
309.6
... More
Providing and placing water tank make P.V.C. SINTEX three layer having capacity of 1000 ( One thousand) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
10800
43200
... More
Providing and laying and jointing 150mm (One hundred fifty milimetres) dia P.V.C.. pipes including fixing with approved adhesive, testing of joints etc. complete within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
20
654
13082
... More
Providing and laying cement concrete 1:5:10(1 Cement : 5 Sand : 10 graded stone aggregate 40mm nominal size ) in haunching of PVC. pipes of 150mm internal diameters, including concrete for beddings necessary form work and curing complete.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
20
860
17218
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 900x800mm (Nine hundred into Eight hundred millimetres) and 450mm (Four hundred fifty milimetres) deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg With Sewer bricks conforming to IS : 4885 as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
11210
22421
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III): 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 1200x900 mm (Twelve hundred into Nine hundred millimetres) and 900mm (Nine hundred milimetres) deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) With Sewer bricks conforming to IS : 4885 as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
24990
49980.6
... More
Constructing brick masonry chamber for under ground C.I. (Cast iron) inspection chamber and bends with common burnt clay building bricks in cement mortar 1:4(One cement isto Four sand) C.I. (cast iron) cover with frame(light duty) 455x610mm (Four hundred fifty five into Six hundred ten millimetres)internal dimensions total weight of cover and frame to be not less than 38Kgs (Thirty eight Kilograms) weight of cover 23 Kgs (twenty three kilograms)and weight of frame 15 Kgs (Fifteen kilograms) RCC (Reinforced cement concrete) top slab with 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty millimetres) nominal size mix foundation concrete 1:5:10 (One cement isto Five sand isto Ten graded crushed/broken stone aggregate 40mm(Forty millimetres nominal size) inside plaster 15mm ( Fifteen millimetres) thick with cement mortar 1:3 ( One Cement isto three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera. complete inside dimensions 455x610mmx450mm (Four hundred fifty five into Six hundred ten into Four hundred fifty millimetres) deep single pipe line as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
6152
12305.2
... More
Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
668
1337.2
... More
Excavating trenches of required width for pipes, cables etc including excavation for sockets and dressing of sides ramming of bottoms depth upto 1.5 m, including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 metre for Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia complete.within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
30
328
9852
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements