Public Works Department Tender

Excavation in soil in hilly areas in all heights and depths, in all kinds of soil including saturated soil comprising of pick, jumper, blasting work (both in soft and hard rock), chiseling/wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including, dewatering wherever required, setting out to the required lines, grades, side slopes, width, camber, super elevation and levels as shown on the drawings and as directed by Engineer-in-Charge at site according MORD to technical specifications clause 1603.1 & 1603.2, sorting out useful/ unuseful materials and stacking the same in all leads and lifts and transportation of useful materials for filling in roadways, embankments, for grade improvements and levelling to the required grade and then disposing of surplus excavated earth in acquired width of roads or on approved dumping sites through all modes of transportation including head load, animal load or mechanical means along with its levelling, fine dressing and including all labour, machineries, materials, tools, equipments and safety measures and incidentals necessary to complete the work by all means (if required). Any loss to the public and private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be duly compensated by him in all respects. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government, but excluding GST & including entire carriage of material with in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Earth work in excavation for structures in all depths as per drawing and technical specification for rural roads clause 305 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion, damage to hill side, water pollution etc. and to protect stability of hill side. Rock shall be excavated with chiseling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber, super elevation and levels as shown on the drawings or as directed by the Engineer-in-Charge including hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner, filling of unevenness and finishing of the road to specified dimension or as directed by the Enginer-in-Charge. If the foundation of the structure is in an area with stagnant water or water is met within the excavation due to stream flow, seepage, rain and other causes, it shall be removed by suitable diversion, bailing out or pumping as directed and the area of the foundation or embankment shall be kept dry. Any loss to the public or private property during the course of excavation shall be the sole responsibility of the contractor which shall have to be duly compensated by him at his own cost in all cases. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government, but excluding GST & including entire carriage of material with in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.

Providing and laying concrete Mechanically mixed and vibrated mix 1:5:10 (one cement: five sand: ten graded, crushed stone aggregate 40mm (forty millimetre) nominal size for plain /reinforced concrete in open foundations and plinths or similar works complete as per drawings and MORD technical specification clause 802, 803, 1202 and 1203 and curing complete. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax or other taxes imposed by the Government, but excluding GST & including entire carriage of material with in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.