Public Works Department Tender

Providing sub surface drainage pipes (horizontal/inclined) in the slope/ weep holes with perforated PVC pipe (lined with non woven geotextiles) of 75 mm(Seventy Millimeter) internal diameter by drilling and inserting the perforated PVC pipe as per the drawings etc complete as per direction of Engineer-In-Charge. Including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government. RD 1/390 to 1/411= 105 Rmt RD 1/411 to 1/433= 110 Rmt RD 1/433 to 1/460= 135 Rmt

Providing and applying 100 mm(one hundred millimetre) thick shotcrete in layers with approved design mix concrete M-25 (M-twenty five) and cement content not less than 360 kg (three hundred sixty kilogram) per cubic metre with minimum characterstic compressive strength as per approved design mix with ordinary portland cement, coarse sand and graded stone aggregates of 10 mm(ten millimeter) maximum size in proportion as per the design criteria including the cost of centering and shuttering etcetera as directed by Engineer in Charge. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkhana, toll tax, GST and any other taxes imposed by the Government. RD 1/390 to 1/411= 840 sqm RD 1/411 to 1/433= 880 sqm RD 1/433 to 1/460= 1080 sqm

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling / wedging out rocks ( where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 and as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides and bottom and back filling in trenches with excavated Suitable / approved materials to the original surface in layers not exceeding 150mm (one hundred fifty millimetre). Compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidental. The rate including octroi, royality,Malkana,toll tax sale tax,GST or other taxes imposed by the Government. RD 1/390 to 1/411= 34.53 cum RD 1/411 to 1/433= 36.18 cum RD 1/433 to 1/460= 48.26 cum

Providing and laying mechanically mixed and vibrated cement concrete M-15 (M-Fifteen) design mix with cement contents not less than 275 kg ( two hundred seventy five kilogram) per cubic metre with crushed / broken stone aggregate 40mm (Forty millimetres nominal size) by levelling in parapets and toe walls etcetera including cost of form work and curing complete as per drawing and MORTH technical specifications section 1700 and 2700 as directed by the Engineer-Incharge including carriage of material within all leads, lifts, and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government. RD 1/390 to 1/411= 59.68 cum RD 1/411 to 1/433= 58.06 cum Portion C= 82.22 cum

Providing 100mm cone (Hundred millimeter) diameter PVC(poly Vinyl chloride) pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etc., extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards draining face complete as per drawings and MORD technical specifications clause section 700 and 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality,Malkana,toll tax sale tax,GST or other taxes imposed by the Government. RD 1/390 to 1/411= 40.00 Nos. RD 1/411 to 1/433= 40.00 Nos. RD 1/433 to 1/460= 50.00 Nos.

Back filling of granular material behind abutments, return walls, wing walls and retaining walls etc. Complete as per drawings and MORD technical specification section 1200 and 1600 or as directed by the Engineer-in-Charge ,including carriage of materials within all leads, lifts and other incidental.The rate including octroi, royality,Malkana,toll tax sale tax,GST or other taxes imposed by the Government. RD 1/390 to 1/411= 7.56 cum RD 1/411 to 1/433= 6.60 cum RD 1/433 to 1/460= 9.72 cum