Public Works Department Tender

300 X 16 mm (three hundred into sixteen millimeter)

250x16mm (two hundred fifty into sixteen millimeter)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, with necessary screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

250x10 mm (two hundred fifty into ten millimeter)

150x10mm (one hundred fifty into ten millimeter)

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not lrss than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

125mm (one hundred twenty five millimeter)

100mm (one hundred millimeter)

Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm (twenty five milimeter) to 40 mm (firty milimeter) thick. 2nd class deodar wood, in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5mm ( zero point five milimeter) and average width of aperture 1.4 mm (one point four millimeter) in both directions for doors, windows and clerestory windows with necessary screw 35mm (thirty five milimeter) thick shutters, second class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

15mm (fifteen milimeter) Cement plaster on the rough side of single or half brick wall of mix: 1:6 (one cement: six fine sand) complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm(one millimeter), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point nintey liter/ten square meter) over an under coat of primer applied @0.75 ltr/10sqm (zero point seventy five liter/ten square meter) of approved brand and manufacture, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing bright finished brass single acting spring hinges with necessary brass screw etc. complete: 150 mm (one hundred fifty millimeter), complete upto floor all level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm (five point five milimeter) thick glass panes, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .

Providing and fixing 19mm (Nineteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 19mm (Nineteen millimeter) thick commercial board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc. complete), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete (triple strip vertical type), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wooden moulded beading to door and window framed with iron screw, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50x12mm( fifty into twelve milimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .

Supplying and Fixing Himalyan Acountics Cement Fiber Tile 595x595x5 mm (five hundred nintey five into five hundred nintey into five milimeter) with square edge density 1050kg/m3 covered with absorbtive microfiber coating on the front side and Acoustics fiber on the back side, thus making it acoustically absorbtive, water resistance, fire resistant as per IS 1734 of absorption coefficient 0.89 at 160 Hz tested as per ISO 354. The tiles are anti sag and are to be installed on T24grid system of 0.6mm thick, Main 'T' length minimum 3000mm (three thousand milimeter) web minimum 35mm (thirty five milimeter to be placed at 600mm (six hundred milimeter)centre to centre and secondary cross 'T' of length 600mm (six hundred milimeter), web minimum 27mm (twenty seven milimeter), inter locked, Wire Support for Maint T to be taken at every 1200mm (twelve hundred milimeter) length wise end 600mm (six hundred milimeter) width wisew, Specially designed for Acoustic Vibration managment and long life with a backingof HIMALYAN ACCOUNTICS. 50mm (fifty milimeter) thick, 1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 thermal conductivity test, W/mk, as per ASTM C 518 test result (SC-6490)-0.03312 for excellent results, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing therman insulation of ceiling (under deck insulation) with Resin Bonded Rockwool confirming to IS: 8183, density 48 kg/ m3, 50mm (fifty milimeter) thick wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats 50x50x3 mm (fifty into fifty into three milimeter)@60 cm and wire mesh of 12.5mm x 24 (twelve point five milimeter into twenty four) gauge wire mesh, for top most ceiling of building, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Rai wood panelling with plank size 75x25mm (seventy five into twenty five milimeter) & 75mm x12.5mm (Seventy five milimeter into twelve point five milimeter) in combination over frame of wood work (to be paid seprately) with top moulding complete in all respect, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Deodar wood 1st class) complete upto all floor level, including entire carriage of materials in all leads and lifts and as per drawing and technical specifications as per the direction of Engineer-in-charge.

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) 9mm (nine millimeter) thick, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Melamine polishing on wood work (one or more coat), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 75 mm x 60mm ( seventy five in to sixty milimeter) rounded hand rails in straight length complete in. 1st class deodar wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm(twenty into ten into two millimeter) and braced with flat iron diagonals 20x5 mm(twenty into five millimeter) size, with top and bottom rail of T-iron 40x40x6 mm(fourty into fourty into six millimeter), with 40 mm(fourty millimeter) dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm (one point sixty seven litter/ten square meter) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (two poin twenty killograme/ten square meter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, upto all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a all leads : All kinds of soil, Pipes, cables etc, not exceeding 80 mm dia (eighty milimeter diameter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.

Providing and fixing white vitreous china dual purpose closet suitable for use as squatting pan of European type water closet (Anglo Indian W.C. pan) with seat and lid fixed with C.P. brass hinges and rubber buffers, 10 (ten) litre low level flushing cistern with fitting & C.I. brackets, 40 mm (forty millimeter) flush bend, 20mm (twenty milimeter) overflow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old W.C seat and "S" or "P" trap at site complete with all operations including all necessary material s, labour and disposal of dismantled material including Malba, all complete as per the direction of Engineer-in-Charge. Orissa pattern W.C. Pan of size 580x440 mm(five hundered eighty into four hundred fourty millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimeter) C.P. brass pillar taps, 32 mm thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm( six hundred thirty into four hundred fifty milimeter) with a pair of 15 mm (fifteen millimeter) C.P. brass pillar taps, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm (thirty two millimeter) dia, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing toilet paper holder : C.P. brass, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing ISI markedhigh pressure PVC spigot and socket, waste and ventilating pipe including fixing with approved adhesive etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

110 mm (One hundred ten millimeter) diameter

75 mm (Seventy five millimeter) diameter

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour, 600 mm (six hundred millimeter) long towel rail with total length of 645 mm (six hundred forty five millimeter), width 78 mm (seventy eight millimeter) and effective height of 88 mm (eighty eight millimeter), weighing not less than 190 gms (one hundred nintey grames), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)32 mm (thirty two milimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm (fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm (forty five centimeter) length, 15 mm (fifteen millimeter) nominal bore, for wash basin including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, in all floors, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931, 15mm (fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighting not less than 810 gms.. 15 mm (fifteen milimeter) nominal bore , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT pillar cock of approved quality and colour. PTMT pillar cock, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT soap Dish Holder having length of 138mm (one hundred thirty eight millimeter ), breadth 102mm (one hundred two millimeter), height of 75mm (seventy five millimeter with concealed fitting arrangements, weighing not less than 106 gms including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame trape (Standard Pattern), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .

Providing and laying in trenches GI tubes 20mm (twenty millimeter) nominal dia. (Medium Grade), tube fittings, , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .

15mm (fifteen millimeter) nominal dia.

20mm (twenty millimeter) nomainal dia.

Making connection of galavanised iron distribution branch with galvanised mild steel main 25mm (twenty five millimeter) to 40mm (fourty millimeter) nomainal bore by providing and fixing tee including cutting and threading the pipes complete: including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .

Providing and fixing white vitereous china flat back or wall corner type lipped front urinal basin of 430×260×350 mm or 430×260×350 mm sizes respectively, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per the direction of Engineer-in-charge .