Public Works Department Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Eprocure
Opening Date12 Mar 2025
Closing DateCancelled
Tender Amount₹ 1,96,07,908
Costs
EMD
₹ 3,92,200Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Sub Tehsil Haripurdhar, District Sirmour ( Hp )
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_101686_1Tender No
SANGRAH 8720-45 DATED 11.03.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Construction of embankment with approved materials deposited at site from road way cutting & excavation from drain & foundation of other structures graded and compacted to meet the requirement of Table 300.1 & 300.2 as per Technical Specification clause 301.5 including hauling of materials within all leads & lifts & other incidential charges & as per direction of Engineer-in-Charge.
360.32
116
41869
... More
Supplying & filling in plinth with sand under floors including watering, ramming, consolidating & dressing complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
28.69
2327
66763
... More
Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
37.93
6234
236484
... More
Providing concrete for plain/reinforced concrete in open foundations complete as per drawing & technical specification clauses 802,803,1202 & 1203 nominal mix cement concrete 1 : 4 : 8 ( One cement : four sand : eight graded stone aggregate 25 mm nominal size ) including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-charge.
381.75
6290
2401379
... More
Providing and laying in position cement concrete of specified grade mechanically mixed and curing complete excluding the cost of centering and shuttering - All work up to plinth level and all floor level in 1:5:10 (One Cement : five coarse sand : ten graded stone aggregate 40mm (forty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
11.44
5869
67152
... More
Providing & laying cement concrete in retaining walls, return walls, walls ( any thickness ) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapet coping, bed blocks, anchor blocks, plain window sills, fillets, Sunken floor etc., upto floor five level, excluding the cost of centring, shuttering & finishing 1 : 1.5 : 3 ( One cement : one & half coarse sand : three graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) including all leads, lifts & carriage of materials & to the entire satisfication of the Engineer-in-Charge.
3.24
9502
30789
... More
Making plinth protection 50 mm ( fifty milimetre ) thick of cement concrete 1 : 3 : 6 ( One cement : three coarse sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) over 75 mm ( seventy five milimetre ) thick bed of dry brick ballast 40 mm ( forty milimetre ) nominal size, well rammed & consolidated & grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
43.95
710
31233
... More
Providing and laying in position cement concrete of specified grade mechanically mixed , vibrated & curing complete excluding the cost of centering, shuttering, finishing & reinforcement - All work up to plinth level and all floor level in 1:1.5 : 3 (One Cement : One & half coarse sand : five graded stone aggregate 20mm (twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
39.1
8528
333451
... More
Providing and laying reinforced cement concrete work in walls (any thickness), mechanically mixed, vibrated and curing complete including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level , excluding cost of centering, shuttering, finishing and reinforcement in 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
31.21
9882
308441
... More
Providing and laying reinforced cement concrete work mechanically mixed & vibrated in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor all level mechanically mixed, vibrated and curing complete, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand : three graded stone aggregate 20mm ( twenty millimeter ) nominal size) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
151.67
10313
1564203
... More
Providing form work with steel plates 3.15mm ( three point fifteen millimeter ) thick welded with angle iron in frame 30X 30X5mm ( thirty X thirty X five millimeter ) so as to give a fair finish including centering ,shuttering, strutting and propping etc. with wooden battens and ballies , height of propping and centering below supporting floor to ceiling not exceeding 4.00 meters ( four meters ) and removal of the same for insitu- reinfoced concrete and plain concrete work including all leads and lifts of materials or as per the directions of Engineer in Charge.
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
118.13
221
26207
... More
Suspended floors, roofs, landings, balconies and access platform including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
512.77
585
299996
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
584.55
474
277164
... More
Columns, Pillars, Piers, Abutments, Posts and Struts Circular including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
392.35
551
216558
... More
Stairs, (excluding landings) except spiral stair cases including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
40.17
506
20344
... More
Edges of slabs and breaks in floors and walls Under 20cm ( twenty centimeter ) wide including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
206.15
124
25738
... More
Vertical and Horizontal fins individually or forming boc louvers band, facia and eaves boars, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
12.71
838
10652
... More
Providing and placing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding wire all complete upto floor all level. Thermo-Mechanically Treated bars of grade Fe-500 D or more including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
27294.5
103
2815428
... More
Extra for rendering smooth the top of suspended floors, landings and staircases ( treads & risers ) with cement mortar 1 : 2 ( One cement : two coarse sand ), including a floating coat of neat cement and protecting the surface with a layer of 7.5 cm ( Seven point five centimetre ) of earth laid over 15 mm ( fifteen milimetre ) of fine sand in case of suspended floors and brick laid in mud mortar in case of landings and steps, including subsequent removal and cleaning of the same complete,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
52.88
132
7022
... More
Rat trap bond brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in all shapes and sizes in Cement mortar 1 : 6 ( One cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
18.22
7268
132433
... More
Rat trap bond brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in Cement mortar 1 : 6 (one cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
95.88
8487
813758
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in all shapes and sizes in Cement mortar 1 : 6 ( One cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
29.35
8659
254143
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes in Cement mortar 1 : 6 (one cement : six coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
42.77
9877
422471
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1 :4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
93.13
1056
98401
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level in all shapes and sizes : Cement mortar 1 : 4 ( One cement : four coarse sand ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
293.5
1193
350175
... More
Stone/ boulder filling behind retaining wall/ under flooring, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge
50.36
1953
98361
... More
Providing & fixing panelled or panelled & glazed shutters for doors, windows & clerestory windows fixing with butt hinges or required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-Charge,Butt hinges & necessary screws shall be paid separately, Second class Deodar wood, 35 mm ( thirty five milimetre ) thick shutters , including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge .
3.44
3333
11466
... More
Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed shutters for doors, windows & clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ), panelling for panelled or panelled & glazed shutters 25 mm to 40 mm ( twenty five milimetre to forty milimetre ) thick Particle board 12 mm ( twelve milimetre ) thick pre-laminated particle board with decorative lamination on both side, grade 1, Type-II, IS: 12823 marked, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
7.96
1715
13651
... More
Providing & fixing flush door shutters interior grade, commercial type core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm ( thirty five milimetre ) thick including black enamelled mild steel butt hinges, including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
63.27
2819
178371
... More
Providing & fixing wire gauge shutters using galvanised mild steel wire gauge of average width of aperture 1.4 mm ( one poin t four milimetre ) in both directions with wire of dia 0.63 mm ( zero point six three milimetre ) for doors, windows, clerestory windows with hinges & necessary screws 35 mm ( thirty five milimetre ) thick second class deodar wood, including all leads, lifts & carriage of materials and to the entire satisfaction of the Engineer-in-Charge.
9.22
4161
38365
... More
Providing & fixing Mild steel grills of required pattern in frames of windows etc. with mild steel flats, square or round bars etc. including priming coat with approved steel primer all complete fixed to openings/ wooden frames with rawl plugs screws etc., including all leads, lifts & carriage of materials and to the entire satisfaction of the Engineer-in-Charge.
2222.85
176
392555
... More
Providing & fixing panelling or panelling & glazing in panelled or panelled & glazed shutters for doors, windows & clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured ), panelling for panelled or panelled & glazed shutters 25 mm to 40 mm ( twenty five milimetre to forty milimetre ) thick, Float glass panes 5.5 mm ( five point five milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
148.19
1897
281228
... More
Providing & fixing PGI/PVC Rigis foam sheet 1 mm ( One milimetre ) thick on existing doors shutters ( bath room & W.C. doos ) using synthetic rubber based adhesive, including alllead, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
11.96
1048
12544
... More
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 300 x 16 mm ( three hundred into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
16
264
4227
... More
Providing & fixing aluminium sliding door bolts, ISI marked anodised ( Anodic coating not less than grade AC 10 as per IS:1868 ), transparent or dyed colour to required colour or shade, with nuts & screws etc. complete 250 x 16 mm ( two hundred fifty into sixteen milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
23
229
5282
... More
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200 x 10 mm ( two hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
62
80
5016
... More
Providing & fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 x 10 mm ( One hundred into ten milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
46
69
3213
... More
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm ( one hundred twentyfive milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
62
51
3202
... More
Providing & fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS;1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100 mm ( one hundred milimetre ) size including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
46
37
1739
... More
Providing & fixing ISI marked oxidized mild steel tower bolts black finish, ( barrel type ) with necessary screws etc. complete 200 x 10 mm ( two hundred into ten milimetre ) size including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
850
62
53168
... More
Providing & fixing ISI marked oxidized mild steel handles conforming to IS : 4992 with necessary screws etc. complete 75 mm ( seventy five milimetre ) size including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
850
35
29920
... More
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Single rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
28
33
925
... More
Providing & fixing aluminium hanging floor stopper ISI marked anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour & shade, with necessary screws etc. complete Twin rubber stopper including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
7
62
435
... More
Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coat on unexposed surface etc. complete second class teak wood 50 x 12 mm ( fifty into twelve milimetre )size, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
252
176
44591
... More
Providing & fixing Cub board shutters 19 mm ( nineteen milimetre ) thick with pre-laminated flat pressed three layers particle board or graded wood particle board IS: 12823 marked exterior grade ( Grade I type II ) , having one side decorative lamination & other side balancing lamination, including second class teak wood lipping of 25 mm wide 12 mm thick ( twenty five milimetre wide twelve milimetre ) thick ) with necessary screws & bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
18.5
1748
32343
... More
Providing & fixing decorative high pressure laminated sheet of plain/ wood grain in gloss /matt/ Suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type-S, including cost of adhesive of approved quality 1.00 mm ( One milimetre ) thick sheet, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
18.5
768
14216
... More
Providing & fixing 19 mm ( Nineteen milimetre ) thick water proof commercial board in shelves/box for Cub board with butt joints & fixing with nails & screws etc. complete, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
28.26
1217
34416
... More
Providing & fixing plywood 4 mm ( four milimetre ) thick, one side decorative veneer conforming to IS : 1328 ( Type-I ), for plain lining/ cladding with necessary screws, including priming coat of unexposed surface with decorative veneer facings of approved manufacture, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
24.5
1065
26104
... More
Providing & fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand ) logo with ISI, IS:3564, embossed on the body, door weight upto 35Kg ( Thirty five kilogram ) door with upto 700mm ( seven hundred milimetre ) with necessary accessories & screws etc. complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
14
1019
14266
... More
Providing & fixing special quality bright finished brass cub board or ward robe locks with four levers of approved quality including necessary screws etc. complete 50 mm ( fifty milimetre ) size, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
14
261
3662
... More
Providing & fixing 50mm ( fifty milimetre ) bright finished brass cub board or ward robe knob of approved quality with necessary screws, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
14
57
803
... More
Providing & fixing magetic catcher of approved quality in Cub board/ ward robe shutters, including fixing with necessary screws etc. complete double trip ( horizontal type ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
14
36
513
... More
Providing & fixing expandable fasterners of specified size with necessary plastic sleeves and galvanised mild steel screws including drilling holes in masonry work/ cement concrete/ reinforced cement concrete & making good etc. complete 40 mm ( forty milimeter ) long, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
20
415
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bars, ladders, railing, brackets, gates & similar work including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
8512.8
115
982803
... More
Providing & fixing mild steel round holding down bolts with nuts & washers plates complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
150
94
14235
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer using structural steel etc. as required in grating, frames, guard bars, ladders, railing, brackets, gates & similar work including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
519.89
149
77828
... More
Providing & fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing & similar works, including applying priming coat of approved steel primer Mild steel tube, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
103.79
157
16388
... More
Providing & fixing mild steel Tubular frames for doors, windows, ventilators & cub board with rectangular/ L- type sections, made of 1.60mm ( One point six zero milimetre ) thick mild steel sheet, joints mitred, welded & grinded finish, with profiles of required size, including fixing of necessary butt hinges & screws & applying a priming coat of approved steel primer. Fixing with 15 x 3 mm ( Fifteen into three milimetre ) lugs 10 cm ( ten centimetre ) long embedded in cement concrete block 15x10x10cm ( fifteen into ten into ten centimetre ) of cement concrete 1 : 3 : 6 ( One cement : three sand : six graded stone aggregate 20mm ( twenty milimetre ) nominal size ) including all leads, lifts, & carriage of materials & to the entire satisfactionof the Engineer-in-Charge.
7382.16
146
1078164
... More
Providing & fixing factory made ISI marked steel glazed doors, windows & ventilators, side/ top/ centre hung, with beading & all members such as F7D, F4B, K11B & K12B etc. complete of standard rolled steel sections, joints mitred & flash butt welded & sash bars tenoned & riveted, including providing & fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, ( sectional weight of only steel members shall be measured for payment ) fixing with 15 x 3 mm ( fifteen into three milimetre ) lugs 10 cm long embedded in cement concrete block 15x10x10cm ( fifteen into ten into ten centimetre ) of cement concrete 1 : 3 : 6 ( One cement : three sand : six graded stone aggregate 20 mm ( twenty milimetre ) nominal size ) including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
206.08
211
43679
... More
Providing & fixing fly proof wire gauge to windows, clerestory windows & doors with mild steel flat 15 x 3 mm ( fifteen into three milimetre ) & nuts & bolts complete, Galvanised mild steel wire gauge with 0.63 mm ( zero point six three milimetre ) dia wire & 1.4 mm ( one point four milimetre ) aperture on both sides, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
145.23
836
121441
... More
Cement concrete flooring 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm ( forty milimetre ) thick with 20mm ( twenty milimetre ) nominal size ) stone aggregate including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
16.09
492
7921
... More
Mirror polished Kotah stone slab flooring over 20 mm ( twenty milimetre ) ( average ) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing & polishing complete with base of cement mortar 1 : 4 ( one cement : four coarse sand ) 25 mm ( twenty five milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
254.61
1857
472900
... More
Mirror polished Kotah stone slab 20 mm ( twenty milimetre ) thick in risers of steps, skirting, dado & pillars laid on 12 mm ( twelve milimetre ) ( average ) thick cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing & polishing complete, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
19.77
1982
39197
... More
Providing & fixing antiskied Ceramic matt finished floor tiles of size 300 x300 mm ( Three hundred into three hundred milimetre ) ( thickness to be specified by the manufacture ) of first quality conforming to IS: 15622 , of approved make in all colours, shade except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, laid on 20 mm ( twenty milimetre ) thick cement mortar 1 : 4 ( One cement : four coarse sand ) & jointing with grey cement slurry @ 3.3 ( at the rate three point three ) kilogramme per Square meters, including pointing in white cement mixed with pigment of matching shade complete, including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
58.13
1009
58659
... More
Providing & fixing Ist quality Ceramic wall tiles of Asian tile/Somany/Nitco conforming to IS: 15622 ( thickness to be specified by the manufacture ) , of approved make in all colours, shade except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps & dados over 12 mm ( twelve milimetre ) thick bed of cement mortar 1 : 3 ( One cement : three coarse sand ) & jointed with grey cement slurry @ 3.3 ( at the rate three point three ) kilogramme per Square meters, including pointing in white cement mixed with pigment of matching shade complete, including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
202.19
1032
208701
... More
Providing & fixing 18 mm ( eighteen milimetre ) thick for wall lining ( veneer work ) , backing filled with a grout of average 12 mm ( Twelve milimeter ) thick in cement mortar 1 : 3 ( One cement : three coarse sand ), including pointing with white cement mortar 1 : 2 ( One white cement : two marble dust ) with an admixture of of pigment to match the marble shade ) ( To be secured to the backing by means of cramps, which shall be paid for separately ) , including all leads,lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge.
21.27
6025
128160
... More
Providing & fixing 18 mm ( eighteen milimetre ) thick gang saw cut, mirror polished, premoulded & prepolished, machine cut for kitchen plateforms,vanity counters, window sills, facias & similar locations of required size, approved shade, colour & texture laid over 20 mm ( twenty milimetre ) thick base cement mortar 1 : 4 ( One cement : four coarse sand ), joints treated withwhite cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, coulding & polishing to edges to give high glass finish etc. complete at all level Granite of any colour, shade & all area of slab including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
8.26
4036
33339
... More
Providing & fixing double charged vitrified antiskid tiles 605 x 605 mm ( Six hundred five into six hundred five milimetre ) ( of approved shade & Pattern ) of Orient-Bell, Nitco & Johnson or it's equivalent floor with different sizes ( thickness to be specified by the manufactured ) , with water absorption less than 0.08 % ( Zero point zero eight percent ) & conforming to IS: 15622, of approved brand & maufacturer, in all colours & shade, laid with cement based high ploymer modified quick set tile adhesive ( water based ) conforming to IS : 15477, in average 6 mm ( six milimetre ) thickness, including grouting of joints ( payment for grouting of joints to be made separately ), including all leads, lifts & carriage of materials & to the entire satisfaction of Engineer-in-Charge
257.73
1704
439223
... More
Providing & fixing double charged vitrified antiskid tiles 605 x 605 mm ( Six hundred five into six hundred five milimetre ) ( of approved shade & Pattern ) of Orient-Bell, Nitco & Johnsonor it's equivalent floor with different sizes ( thickness to be specified by the manufactured ) , with water absorption less than 0.08 % ( Zero point zero eight percent ) & conforming to IS: 15622, of approved brand & maufacturer, in all colours & shade, in skirting, risers of steps, laid with cement based high polymer modified quick set tile adhesive ( water based ) conforming to IS : 15477, in average 6 mm ( six milimetre ) thickness, including grouting of joints ( payment for grouting of joints to be made separately ) , including all leads, lifts and carriage of materials & to the entire satisfaction of Engineer-in-Charge.
24.49
1813
44404
... More
Stone work ( machine cut edge ) for wall lining etc. ( Veneer work ) upto 10 metres height, backing filled with a grout of average 12 mm thick cement mortar 1 : 3 ( One cement : three coarse sand ) including pointing in white cement mortar 1 : 2 ( One white cement : two stone dust ) with an admixture of pigment matching the stone shade : ( To be secured to the backing & the sides by means of cramps & pins which shall be paid for separately ) Gang saw cut stone 30 mm thick Red sand stone, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
62.2
1973
122758
... More
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 110mm ( One hundred ten millimeter ) diameter metre.
90.2
437
39463
... More
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 110mm ( eighty seven point five degree one hundred ten millimeter ) bend.
16
172
2764
... More
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Shoe ( Plain )110mm ( One hundred ten millimeter ) shoe.
16
138
2211
... More
Providing & fixing mild steel holder bat clamps of approved design to cast iron or S.C.I. rain water pipes embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1 : 2 : 4 mix ( One cement : two coarse sand : four graded stone aggregate 20 mm nominal size ) & cost of cutting holes & making good the wall etc. 110 mm ( One hundred ten milmetre ) diameter PVC pipe including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
40
242
9708
... More
Providing & fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from mild steel sheets & galvanised with zinc coating of 120 ( one hundred twenty ) gramme per square metre ( both side inclusive ) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6mm ( twenty five milimeter into one point six milimetre ) thick with flanges of 27 mm and 37 mm, at 1200 mm ( twenty seven milimetre, thirty seven milimetre , at 0ne thousnd two hundred milimetre ) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm ( Twelve point five milimetre dia into fifty milimetre ) long with 6 mm ( six milimetre ) dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x 0.50 mm( twenty five into ten into zero point five zero milimetre ) of required length with nuts & bolts of required size & other end of angle hanger fixed with intermediate galvanised iron channels 45x15x0.90mm ( forty five into fifteen into zero point nine zero milimetre ) running at the spacing of 1200mm ( One thousand two hundred milimetre ) centre to centre, to which the ceiling section 0.5 mm ( zero point five milimere ) thick bottom wedge of 80 mm ( eighty milimetre ) with tapered flanges of 26 mm ( twenty six milimetre ) each having lips of 10.5 mm, at 450mm ( ten point five milimetre, at four hundred fifty milimetre ) centre to centre, shall be fixed in a direction perpendicular to galvanised iron intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm ( two point six four milimetre dia into two hundred thirty milimetre ) long galvanised iron wire at every junction, including fixing perimeter channel 0.5mm ( zero point five milimetre ) thick 27mm ( twenty seven milimetre ) high having flanges of 20 mm and 30 mm ( twenty milimetre & thirty milimetre ) long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm ( twenty five milimetre ) long dry wall screws @ 230 mm ( at the two hundred thirty milimetre ) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm ( three point five into twenty five milimetre at two hundred thirty milimetre ) centre to centre, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes finishing with jointing compound in three layers covering upto 150 mm ( one hundred fifty milimetre ) on both sides of joint & two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawing, specification & direction of the Engineer-in-Charge but excluding the cost of painting with ACP Sheets of approved shade 60 x 60 cm ( sixty into sixty centimetre ) of approved quality ,including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
30.91
2145
66317
... More
Providing & fixing false ceiling at all height including providing & fixing of frame work made of special sections, power pressed from mild steel sheets & galvanised with zinc coating of 120 ( one hundred twenty ) gramme per square metre ( both side inclusive ) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6mm ( twenty five milimeter into one point six milimetre ) thick with flanges of 27 mm and 37 mm, at 1200 mm ( twenty seven milimetre, thirty seven milimetre , at 0ne thousnd two hundred milimetre ) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm ( Twelve point five milimetre dia into fifty milimetre ) long with 6 mm ( six milimetre ) dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x 0.50 mm( twenty five into ten into zero point five zero milimetre ) of required length with nuts & bolts of required size & other end of angle hanger fixed with intermediate galvanised iron channels 45x15x0.90mm ( forty five into fifteen into zero point nine zero milimetre ) running at the spacing of 1200mm ( One thousand two hundred milimetre ) centre to centre, to which the ceiling section 0.5 mm ( zero point five milimere ) thick bottom wedge of 80 mm ( eighty milimetre ) with tapered flanges of 26 mm ( twenty six milimetre ) each having lips of 10.5 mm, at 450mm ( ten point five milimetre, at four hundred fifty milimetre ) centre to centre, shall be fixed in a direction perpendicular to galvanised iron intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm ( two point six four milimetre dia into two hundred thirty milimetre ) long galvanised iron wire at every junction, including fixing perimeter channel 0.5mm ( zero point five milimetre ) thick 27mm ( twenty seven milimetre ) high having flanges of 20 mm and 30 mm ( twenty milimetre & thirty milimetre ) long,the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm ( twenty five milimetre ) long dry wall screws @ 230 mm ( at the two hundred thirty milimetre ) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm ( three point five into twenty five milimetre at two hundred thirty milimetre ) centre to centre, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes finishing with jointing compound in three layers covering upto 150 mm ( one hundred fifty milimetre ) on both sides of joint & two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawing, specification & direction of the Engineer-in-Charge but excluding the cost of painting with 600x600x16mm ( six hundred into six hundred into sixteen milimetre ) Dune RH 99 tiles of Armstrong of approved quality ,including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
65.16
2058
134129
... More
Providing and laying water proof treatment with Dr. Fixit-FASTFLEX or equivalent with two component polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats. For Ist coat:- Clean and saturate surface and then applying a coat of Dr. Fixit- FASTFLEX by maintening a coverage of 6-7 ( six to seven ) square feet per Kg to achieve one mm thickness and the same process shall be extended upto 300mm vertically. The Second coat shall be applied in oppisit direction after four-six courses of application of Ist coat, then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar of cement : sand ( 1 : 4 ) ( One cement : four coarse sand ) admixed with 200ml ( two hundred mililitre ) of pidiproof LW 200ml ( two hundred mililitre ) per 50 (fifty ) kilogram of cement over the floor with the suitable gradient toward drain pipe, while the second coat of Dr. Fixit id still tacky. including all leads, lifts & carriage of materials & entire satisfaction of the Engineer-in-Charge.
29.25
857
25070
... More
Providing & fixing 0.60 mm ( sixty milimetre ) thick prepainted steel sheet of TATA Dora shinein roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP ) organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting to back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia metre with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
283.76
1388
393859
... More
Providing & fixing ridge or hips 0.60 (sixty centimetre ) over all with thick prepainted steel sheet of TATA Dora Shine in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting plus back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm ( six milimetre ) dia and prepainted G.I. limpet & rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
33.15
758
25158
... More
Providing & fixing valley 60cm overall 0.60 mm ( Sixty milimetre ) thick prepainted steel sheet of Tata Dora Shine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 ( five ) microns over 5 ( five ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia with prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
21.2
908
19260
... More
Providing & fixing flushing 38 cm ( thirty eight centimetre ) overall with 0.45 mm ( Zero point four five milimetre ) thick prepainted sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 ( twenty ) microns over 5 ( five ) microns primer coting plus back coat of polyster of 5 microns over 5 ( five milimetre ) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6mm ( six milimemetre ) dia and prepainted Galvanised iron limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge, including all leads, lifts, carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
169.55
655
111098
... More
Providing & fixing 30 cm ( thirty centimetre ) wide 120 cm ( one hundred twenty centimetre ) overall Box type prepainted Zinc coated sheet gutter with iron bracket 40 x 3 mm ( forty into three milimetre ) size, bolts & nuts and washers etc. including making necessary connections with rain water pipes complete as per design. 0.45 mm ( forty five milimetre ) thick, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
70.4
953
67144
... More
Providing flat iron bracket 50 x 3 mm ( Fifty into three milimetre ) size with necessary bolts, nuts & washers etc. for fixing galvanised steel sheets gutters with purlins including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
105
81
8521
... More
Providing & fixing mild steel B.P. sheet 1.66 mm to 2 mm ( One point six six milimetre to two milimetre ) thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing & welding to steel roof members & applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge ( Base member of steel work shall be measured & paid for separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
88
1936
170386
... More
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:4 ( one cement : four fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
79.65
291
23190
... More
15mm ( fifteen millimeter ) cement plaster on the rough side of single or half brick wall of mix : 1:6 ( one cement : six fine sand ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
2577.11
269
694273
... More
6mm ( six millimeter ) cement plaster of mix 1:3 (one cement : three fine sand) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
488.44
203
99544
... More
Providing & applying plaster of paris putty of 2 mm ( two milimetre ) thickness over plastered surface to prepare the surface even & smooth complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1653.18
93
153746
... More
Distempering with oil bound washable distemper of approved brand & manufacture to give an even shade new work ( two or more coats ) over and including water thinnable priming coat with cement primer including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
985.48
113
112000
... More
Finishing walls with 100 % ( One hundred percent ) premium acrylic emulsion paint having VOC less than 50 ( fifty ) gram per litre UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot Tined ) with silicon additives new work ( Two or more coats applied @ 1.43 ( One point four three ) Litre per 10 ( ten ) square metres over & including priming coat of exterior primer applied @ 0.90 ( Ninety ) litre per 10 ( ten ) Square metres, including all leads, ,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge .
241.69
128
31069
... More
Finishing walls with Acrylic smooth exterior paint with of required shade new work ( two or more coat ) applied @ 1.67 litre/10 Sqmt ( one point six seven litre per ten square metres ) over & including priming coat of exterior primer applied @ 2.20 Kg /10 Sqmt ( at the rate two point two zero kilograme per ten square metre ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
690.83
133
92537
... More
Finishing with Deluxe Multi surface paint system for interior & exterior using primer as per manufactures specifications , Two or more coats applied on walls @ 1.25 litre ( One point two five litre ) per 10 ( ten ) square metres over & including one coat of special primer applied @ 0.75 litre per 10 Square metres, including all leads, ,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
360.24
119
42905
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint of requied shade. Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.80 ltr/ 10sqm( zero point eight zero litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
150
104
15653
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting on wood work with Deluxe Multi Surface Paint of requied shade. Two or more coat applied @ 0.90 ltr/ 10sqm( zero point nine zero litre per ten square meter ) over an under coat of primer applied @ 0.75 ltr/ 10sqm( zero point seven five litre per ten square meter ) of approved brand and manufacture complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
100
107
10795
... More
Providing & fixing 19 x 75 mm ( ninetten into seventy five milimetre ) finished size of first class Rai Tosh wood panelling with 8 mm ( eight milimetre ) thick groove to be polished in natural teak wood shade complete with necessary fixing arrangement and screws etc. complete including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
53.74
1202
64622
... More
Providing & fixing wooden moulded beading to door & windows frames with iron screws, plugs & priming coaat on unexposed surface etc. complete 2nd class teak wood 55 x 30 mm, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
111.96
184
20629
... More
Polishing on wood work with ready mixed wax polish of approved brand and manufacture new work, including all leads, ,lifts, carriage of materials & to the entire satisfaction of the Engineerr-in-Charge including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
53.74
164
8843
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm ( one hundred millimeter ) sand cast Iron P or S trap, 10 litre ( ten litre ) low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge: White Vitreous china Orissa pattern W.C. pan of size 580mm x 440mm ( five hundred eighty millimetre X four hundred forty millimeter ) with integral type foot rests.
3
3962
11887
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre ( ten litre )low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever), Universal pan No. 2061 size 570 x 460 mm( five hundred seventy into four hundred sixty milimetre ) , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required . W.C. Pan with ISI marked white solid seat & Lid, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- W.C. pan with ISI marked white solid plastic seat and lid.
9
4411
39703
... More
Providing & fixing white Vitreous China flat back half stall urinal of size 630 x 420 x 390 mm ( Six hundred thirty into four hundrded twenty into three hundred ninety milimetre ) with white PVC auotmatic flusing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with union & clamps ( all in C.P. brass ) with waste fitting as per large No. 5001 & 2851,C.I. trap with out let grating & other couplings in C.P. brass, including painting of fittings & cutting & making good the walls & floors wherever required Range of two half stall Urinals with 5 litre P.V.C. automatic flushing cistern, including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
6
5994
35968
... More
Providing and fixing wash basin with C.I. brackets, 15mm ( fifteen millimeter ) C.P. brass pillar taps, 32mm ( thirty two millimeter ) C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550 x 400 mm ( Five hundred fifty into four hundred milimetre ) complete with single 15 mm ( fifteen milimetre ) C.P. Brass pillar tap, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
9
3053
27479
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
1
1105
1106
... More
Providing & fixing stainless steel A ISI 304 ( 18/8 ) kitchen sink No. B4511103 with C.I. brackets and stainless steel plug 40 mm including painting of fittings & brackets, cutting & making good the walls wherever required kitchen sink with drain board 810 x 455 mm bowl depth 200 mm or Cera or its equivalent,including all leads, lifts, & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
2
3821
7643
... More
Providing & fixing stainless steel A ISI 304 ( 18/8 ) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm ( forty milimetre ) including painting of fittings & brackets, cutting & making good the walls wherever required kitchen sink without drain board 460 x 385 mm ( Four hundred sixty into three hundred eighty five milimetre ) bowl depth 200 mm, ( Two hundred milimetre ) including all leads,lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
3
2715
8148
... More
Providing and fixing 600mm x 450mm ( Six hundred millimeter into four hundred fifty millimeter ) beveled edge mirror of superior glass (of approved quality) complete with 6mm ( six milimetre ) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
9
991
8922
... More
Providing and fixing 600mm x 120mm x 5mm ( Six hundred millimeter into one hundred twenty millimeter into five millimeter ) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm ( forty millimeter ) long screws, rawl plugs etc., complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
9
677
6102
... More
Providing and fixing Toilet paper holder C.P. brass, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
9
570
5134
... More
Providing & fixing 8 mm ( eight milimetre ) dia C.P./S.S. Jet with flexible tube upto 1.00 ( One ) metre long with S.S.triangular plate to Eureopean type W.C. of quality & make as approved by Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
9
276
2488
... More
Providing & fixing grab bars 600mm x 40mm ( six hundred milimetre into forty milimetre ) in handicapped toilets two number each Chromium plated 40mm ( forty milimetre ) dia steel pipe at 78cm ( seventy eight centimetre ) height with mild steel plates as per detail at the position of the seat & wash basin, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
1
2384
2384
... More
Providing and fixing PTMT liquid soap container 109mm ( one hundred nine millimeter ) wide, 125mm( one hundred twenty five millimeter ) high and 112mm( one hundred twelve millimeter ) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms ( one hundred five grams ) complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
9
228
2052
... More
Providuing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality & colour, 450 mm ( Four hundred fifty milimetre ) long towel rail with total length of 495 mm, 78 mm ( Four hundred ninety five milimeter, seventy eight milimetre ) wide & effective height of 88 mm ( eighty eight milimetre ) , weighting not less than 170 ( One hundred seventy ) grams, including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
9
510
4593
... More
Constructing masonry Chamber 30x 30 x 50 cm( thirty into thirty hundred into fifty centimetre ) in side, in brick work in cement mortar 1 : 4 ( One cement : four coarse sand ) for stop cock, with cast iron surface box 100 x 100 x 75 mm ( One hundred into one hundred into seventy five milimetre ) ( inside ) with hinged cover fixed in cement concrete slab 1 : 2 : 4 mix ( one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty milimetre ) nominal size ), including necessary excavation, foundation concrete 1 : 5 : 10 ( one cement : five coarse sand : ten graded stone aggregate 40 mm ( forty milimetre ) nominal size ) and inside plastering with cement mortar 1 : 3 ( One cement : three coarse sand ) 12mm ( twelve milimetre ) thick, finished with a floating coat of neat cement complete as per standard design, with common burnt clay F.P.S. ( Non modular ) bricks of class designation 7.5,including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
5
2087
10436
... More
Providing & fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete,including carriage of materials in all leads and lifts and as directed by the Engineer-in-Charge.
9
255
2301
... More
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 1216 (16 mm ( sixteen millimeter ) OD) pipe.
126
409
51540
... More
Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre ( one metre ) spacing. This includes testing of joints complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:-1620 (20mm ( twenty millimeter ) OD) pipe.
60
451
27084
... More
Providing and fixing G.I. pipes complete with G.I. fittings & Clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work:-15mm ( fifteen millimeter ) dia nominal bore.
45
434
19555
... More
Providing and fixing G.I. pipes complete with G.I. fittings including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting & making good the walls including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. internal work :- 20mm ( twenty millimetre ) dia.
30
503
15114
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.External work:-15mm ( fifteen millimeter ) dia nominal bore.
75
248
18645
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 25 mm to 40mm ( twenty five millimeter to forty millimeter ) nominal bore.
2
630
1261
... More
Fixing water meter & stop cock in G.I. pipe line including cutting & threading the pipe & making long screws etc. complete ( Cost of water meter & stop cock to be paid separately ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
2
547
1095
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge.
7500
9
70875
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
36
656
23636
... More
Providing and fixing C.P. brass stop cock ( Concealed ) of standard design & of approved make conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
30
815
24465
... More
Providing and fixing C.P. brass angle valve for basin mixer & geyser point of approved quality conforming to IS : 8931, complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. 15mm( fifteen millimeter ) nominal bore .
36
739
26620
... More
Providing & fixing C.P. brass extension nipple ( Size 15 mm x 50 mm ) of approved make and quality as per direction of Engineer-in-Charge, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in Charge.
27
117
3173
... More
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20mm ( twenty millimeter ) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40mm ( forty millimeter ) nominal size), inside plastering 12mm ( twelve millimeter ) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm ( twenty millimeter ) nominal size) finished with a floating coat of neat cement complete as per standard design complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge. : Inside size 90cm x 80cm and 45cm ( Ninety centimeter into eighty centimeter and forty five centimeter ) deep including C.I. cover with frame (medium duty) 455 x 610 mm ( Four hundred fifty five into Six hundred ten millimeter ) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram ) (weight of cover 23 kg ( twenty three kilogram ) and weight of frame 15 kg( fifteen kilogram ) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50.
5
12724
63621
... More
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 150mm dia ( One hundred fifty milimetre ) including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
60
495
29727
... More
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
45
363
16367
... More
Providing & fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
30
266
7991
... More
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 150 mm ( one hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
255
3836
... More
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 110 mm ( one hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
228
3421
... More
Providing & fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
200
3006
... More
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
30
134
4022
... More
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
113
2834
... More
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
92
1389
... More
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
127
2543
... More
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
106
1597
... More
Providing & fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
92
926
... More
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
403
8072
... More
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 110mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
306
4603
... More
Providing & fixing PVC Single equal branch with oval access door, ISI marked insertion rubber washer 3mm ( three milimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
251
2516
... More
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
617
12357
... More
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
479
7194
... More
Providing & fixing PVC double equal branch with oval access door, insertion rubber washer 3mm ( Three milimetre ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
389
3898
... More
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 150 mm ( One hundred fifty milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
20
106
2129
... More
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 110 mm ( One hundred ten milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
85
1286
... More
Providing & fixing PVC clamps ISI marked of approved design with steel screws & rawal plugs etc. complete 75 mm ( Seventy five milimetre ) dia including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
10
71
719
... More
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 150 mm x 110 mm ( One hundred fifty milimetre into one hundred ten milimetre ) dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
152
2281
... More
Providing & fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ) dia, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
131
1970
... More
Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 90 mm ( One hundred ten milimetre into ninety milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
1018
15284
... More
Providing & fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting & making good the wall & floors etc. complete 110 mm x 75 mm ( One hundred ten milimetre into seventy five milimetre ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
15
989
14839
... More
Providing & fixing 15 mm ( fifteen milimetre ) mixer for kitchen sink with top/ bottom swining spouts, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
5
2349
11749
... More
Cutting holes to 30 x 30 cm ( thirty into thirty centimetre ) in walls including making good the same with common burnt clay F.P.S. ( Non modular ) bricks, including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge.
50
336
16833
... More
Cutting holes to 15 x 15 cm ( fifteen into fifteen centimetre ) in Reinforced cement concrete floors and roofs for passing drain pipes including making good the same with cement concrete 1 : 2 : 4 ( One cement : two coarse sand : four graded stone aggregate 20 mm nominal size ), including all leads, lifts & carriage of materials & to the entire satisfaction of the Engineer-in-Charge
25
174
4358
... More
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) rectangular shape 600 x 450 mm ( six hundred into four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
4
1311
5244
... More
Providing & fixing in position precast reinforcement coment concrete manhole cover & frame of required shape & approved quality LD- 2.5 ( Two point five ) square shape 450 mm ( four hundred fifty milimetre ) internal dimensions including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
12
1114
13370
... More
Supplying & filling brick bats in dispension trenches ( Brick aggregate ( Single size ) 50 mm ( Fifty milimetre ) nominal size ) including carriage of materials in all leads and lifts and as directed by the Engineer in Charge
5.57
698
3888
... More
Providing and fixing on wall face PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion, Single socketed pipes complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- 75 mm ( Seventy five millimeter ) diameter metre.
35.1
281
9882
... More
Providing and fixing on wall face PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm ( ten millimeter ) gap for thermal expansion complete including carriage of materials in all leads and lifts and as directed by the Engineer in Charge:- Bend 87.5° 75 mm ( eighty seven point five degree Seventy five millimeter ) bend.
2
152
304
... More
Providing weep holes in brick/ stone masonry, plain/ reinforced concrete abutment, wing wall return walls with 100 mm ( One hundred milimetre ) dia PVC pipe extended through the full width of the structure with slope of 1 (V) : 20 (H) towards drawing face complete as per drawing & technical specification clause 614,709,1204, 3.7 including all leads, lifts & carriage of materials complete as per entire satisfaction of the Engineer-in-Charge.
240
248
59640
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements