Public Works Department Tender

Providing and fixing 600x120x5 mm(six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (KINGSTONE, GEM, PARKO, TECHNOL JAL, JAQUAR ,SEIKO ) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing soap dish recessed type stainless stell AHS-1531 of Jaquar or equivalent complete in all respect (KINGSTONE, GEMJAL, JAQUAR, SEIKO)as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm(fifteen into three millimetre) and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm(zero point sixty three millimetre) dia wire and 1.4 mm (one point four millimetre) aperture on both sides as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level 1:1.5:3 (one Cement : one point five coarse sand : three graded stone aggregate 20 mm(twenty millimetre) nominal size as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing false ceiling at all hights with Wooden Acoustic False Ceiling tiles of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85%(eighty five percent) (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%(one hundred percent) thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm(zero point thirty three millimetre) thick (galvanized @ 120(one hundred twenty) grams per sqm including both sides) comprising of main-T runners of size 24x38 mm(twenty four into thirty eight millimetre) of length 3000 mm(three thousand millimetre), cross - T of size 24x32 mm (twenty four into thirty two millimetre) of length 1200 mm(one thousand two hundred millimetre) and secondary intermediate cross-T of size 24x32 mm(twenty four into thirty two millimetre) of length 600mm(six hundred millimetre) to form grid module of size 600 x 600 mm(six hundred into six hundred millimetre), suspended from ceiling using galvanised mild steel items (galvanizing @ 80(eighty) grams per sqm) i.e. 50 mm (fifty millimetre)long, 8 mm(eighty millimetre) outer diameter M-6 dash fasteners, 6 mm(six millimetre) dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm(eighty five into twenty five into twenty five into two millimetre). Galvanised iron perimeter wall angle of size 24x24x0.40 mm(twenty four into twenty four into zero point forty millimetre) of length 3000 mm(three thousand millimetre) to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm (four hundred fifty millimetre)center to center and 40 mm(forty millimetre) long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3 (twenty four kilogram per cubic metre), 50mm(fifty millimetre) thick, wrapped in 200(two hundred ) G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm(fifty into fifty into three millimetre) @ 60 cm(sixty centimetre) and wire mesh of 12.5 mm x 24mm (twelve point five millietre into twenty four millimetre) gauge wire mesh, for top most ceiling of building as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (one cement : four coarse sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Steel reinforcement (Tata Tiscon/sail make) for Reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

12 mm(twelve millimetre) cement plaster of mix 1:4 (one cement: four fine sand) as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion, (i) Single socketed pipes 110mm(one hundred ten millimetre) dia of D-plast or vectus make as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc External work 15 mm(fifteen millimere) dia nominal bore as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 30 cm(thirty centimetre) length 15 mm(fifteen millimetre) nominal bore as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms(eight hundred ten grams) 15 mm(fifteen millimetre) nominal bore as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimetre) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm(fifteen millimetre) dia , Jal, Jaquar, ESS or its equivalent as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 15 mm(fifteen millimetre) nominal dia CP Brass Single lever telephonic wall mixer of quality & make as approved by as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm(three hundred millimetre) dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm(zero point ninety litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(zero point eighty litre per ten square metre) (ASIAN/NEROLAC/ICI-DULUX) of approved brand and manufacture as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing C.P. brass shower rose with 15(fifteen) or 20 mm(twenty millimetre) inlet 100 mm(one hundred millimetre) diameter as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 18 mm(eighteen millimetre) thick, 150 mm(one hundred fifty millimetre) wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm(six millimetre) coir veneer board, nickle plated M.S. Pipe 20 mm(twenty millimetre) dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm(twenty five into three millimetre) M.S. Flat 10 cm(ten centimetre) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm(one hundred millimetre into forty millimetre into forty millimetre) on both inner side of pelmet and rawl plugs 75 mm long etc. all complete as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing kitchen sink including making all connections excluding cost of fittings White glazed fire clay sink of size 600x450x250 mm(six hunred into four hundred fifty into two hundred fifty millimetre) as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 38 mm(thirty eight millimetre) single piece moulded with height of 270 mm(two hundred seventy millimetre), effective length of tail pipe 260 mm(two hundred sixty millimetre) from the centre of the waste coupling, 77 mm(seventy seven millimetre) breadth with 25 mm(twenty five millimetre) minimum water seal, weighing not less than 263 gms(two hundred sixty three grams) as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 125 mm(one hundred twenty five millimetre) chromium plated brass handles with necessary screws etc. complete as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10 mm(three hundred into ten millimetre)as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logowith ISI, IS : 3564, embossed on the body, door weight upto 35 kg(thirty five kilogram) and door width upto 700 mm(seven hundred millimetre), with necessary accessories and screws etc. complete. as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m(fifty metre) dressing of sides and bottom and backfilling in trenches with excavated suitable material ordinary soil upto 3m(three metre) depth as directed by Engineer-in-charge all kinds of soil including entire carriage of material within all leads, lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering -1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm(twenty millimetre) nominal size) All work up to plinth level as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm(fifteen millimetre) C.P. brass pillar taps, 32 mm(thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm(six hundred thirty into four hundred fifty millimetre) with a pair of 15 mm(fifteen millimetre) C.P. brass pillar taps as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing soil, waste and vent pipes 75 mm(seventy five millimetre) diameter Sand cast iron S&S as per IS - 1729 as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm(one hundred millimetre) inlet and 100 mm(one hundred millimetre) outlet Sand cast iron S&S as per IS: 3989 as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing PVC collar ISI marked 110mm(one hundred ten millimetre) as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Provding and fixing PVC plain bends including fixing with adhesive 110mm (one hundred ten milllimetre) dia as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/Cast iron (spun) pipe embedded in and including cment concrete blocks 10x10x10cm (ten into ten into ten centimetre) of 1:2:4 mix (one cement : two coarse : four graded stone aggregate 20mm (twenty millimetre) nominal size) including cost of cutting holes and making good the walls etc as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular setions/appropriate Z- secctions and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber neoprene gasket etc. Aluminium sections shall be smooth rust free, stright, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing, paneling, C.P. brass/stainless steel screws, all complete as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm(eight millimetre) thickness (weight not less than 20 kg/ sqm(twenty kilogram per squaremetre) as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).18 mm(eighteen millimetre) thick as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etc.complete 600 mm(six hundred millimetre) dia RCC pipes as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete (Glazing, paneling and dash fasteners to be paid for separately)For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing at all height wall panelling with ecotone perforated wall panels 16mm (sixteen millimetre) thick, having hole dia 16mm (sixteen millimetre) NRC valve 0.85(zero point) of panels 600mmx 2420mm (six hundred millimetre into two thousand four hundred twenty millimetre) conforming to IS: 13958-1994 including providing and fixing to frame work made of hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc with iron screws all complete as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and fixing at Roller blinds of pepperfry or equavalent bnarnd chic corded 84x60 (eighty four into sixty) inches of superior quality cloth as per approved sample having good quality of cloth with design and shade as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.