Public Works Department Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Feb 2025
Closing DateCancelled
Tender Amount₹ 51,33,145
Costs
EMD
₹ 1,02,700Document Cost
₹ 2,000Tender Fee
Refer Documents
Summary
Construction Of Veterinary Hospital Building At Domehar Tehsil Arki, District- Solan Himachal Pradesh.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_99308_1Tender No
NIT NO.10444-55 Dated 28.01.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supplying and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
10.11
1402
14177
... More
Supplying filling , spreading and levelling stone boulders of size range 5cm ( five centimeter) to 20cm (twenty centimeter) in recharg pit in the required thickness as per HP. PWD. specifications of 1990 volume-I. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
16.87
921
15544
... More
Providing Centering and Shuttering including strutting ,propping etc. and removal of form for floor to ceiling up to all heights and removal of the same:complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. In foundation, footings, bases of columns etc. and mass concrete.
42
265
11164
... More
In flat surface such as soffits of suspended floor foofs landing.
126.29
582
73551
... More
In lintels ,beams, plinth beams,girders,bressumers and cantilevers up to any depth in all floor level in all heights.
69.51
504
35075
... More
In columns, pillars, piers,Abutments,posts and struts. in all floor level in all heights.
43.2
661
28568
... More
In stair,(excluding landings) except spiral staircase in all floor level in all heights.
10.65
553
5897
... More
In edges of slabs and breaks in floors and walls under 20.00 (twenty centimeter) wide any width in all floor level in all heights.
109.36
159
17399
... More
In plain concrete work in window sill , cornice and moulding etc.
5.15
721
3715
... More
Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth & string courses and the like including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
160.02
540
86459
... More
Providing and laying cement concrete 1:5:10 (One cement : five sand : ten graded crushed hard stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed ,vibrated and curing complete excluding cost of form work in foundation and plinth, as per HP. PWD. specifications of 1990 volume-I. including carriage of all labour, equipmments and materials to various location hrough all modes of transportation in all leads and lifts and all incidental charges.providing and laying cement concrete 1:5:10 (One cement : five sand : ten graded crushed hard stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed ,vibrated and curing complete, excluding cost of form work in foundation and plinth,as per H.P.PWD specification 1990 valume-I, including carriage of all labour,equipments and materials to various location through all mode of transportattion in all leads and lifts and all incidental charges
110.25
3974
438222
... More
Providing and laying cement concrete 1:6:12 (One cement : six sand : twelve crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work in foundation and plinth and as per HP. PWD. specifications of 1990 volume-I. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
8.98
4143
37209
... More
Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty millimeter) nominal size) mechanically mixed,vibrated and curing complete excluding cost of centring and shuttering in foundation and plinths required complete and as per HP. PWD. specifications of 1990 volume-I. including carriage of all ,labour,equipments and materials to various location through all modes of transportation with in all leads, lifts, and other incidental charges.
16.94
4602
77966
... More
Providing and laying cement concrete 1:2:4 (one cement is to two sand is to four graded stone aggregate 20mm twenty milimetre nominal size) and curing complete excluding cost of form work in foundation and plinth as per the direction of the Engineer-in-Charge but including carriage of materials up to all leads and lifts
2.42
5735
13880
... More
Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, cement concent considered in this item @330kg/ cum including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level.
62.49
6942
433812
... More
Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, cement concent considered in this item @320kg/ cum including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level upto floor V level.
36.73
8038
295247
... More
Coursed rubble masonry (first sort) with hard stone in foundation and plinth including raking out joints in with Cement mortar 1:6 (one cement : six coarse sand)including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads lifts and all incidental charges.
7.26
6332
45973
... More
Cement concrete flooring 1:2:4 ( one cement isto two course sand isto four graded stone aggregate 20 mm , (twenty milimeter) nominal size laid in one layer finished with a floating of neat cement, etc. complete.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 50 mm (fifty milimeter) thick.
12.25
418
5128
... More
Providing steel reinforcement for RCC work including straightening,cutting,bending,placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars.complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
11785.56
94
1110200
... More
Providing and laying damp proof course 100mm (one hundred millimeter) thick with cement concrete 1:2:4 (One cement:two sand:four stone aggregate 20mm ( Twenty millimeters) nominal size) and curing complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
20.03
706
14145
... More
Providng and applying a coat of residual petrolemen bitumen VG-10(Ten) approved quality using 1.70 (One point seventy ) kilogram per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
20.03
166
3339
... More
Second class brick work using common burnt clay building bricks in super structure above plinth level upto all floor levels in all shapes and sizes in cement mortar 1:6 (One cement : Six sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
19.99
7734
154621
... More
Second class half brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (One cement : four sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
13.53
7659
103638
... More
Half brick masonry with common burnt clay F.P.S.(Modular) bricks of class designation 12.50 (twelve point five zero) in superstructure above plinth level upto floor five levels in cement mortar 1:4 (1 cement : 4 sand).complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
43.71
940
41096
... More
Providing and fixing angle iron doors, windows and ventilator of mild steel angle iron 35*35*5 mm ( thrity five into thrity five into five) milimetre angle iron with M.S. flat 50*4*4 mm ( fifty into four into four) milimetre in combination welded together to make one frame including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
156.42
106
16643
... More
Providing and fixing M.S. channel in doors and windows frames manufactured from M.S. channels section 75*40mm ( seventy five into forty) milimetre for end frame and for centre channels 75*40mm with M.S. flat/plate 75*5mm ( seventy five into forty) milimetre in combination welded together to make one rame as per design drawing incldibng hinges, jambs beeds if required threshold of M.S. angle 50*25mm ( fifty into twenty five) milimetre welded of rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges2.5mm thick with a provision of locking arrangements shock observes and specified and applying coat of approved steel primer afteer pr treatment of surface as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
643.77
106
68497
... More
Providing and fixing angle iron door,window,clerestory window frame manufactured from M.S.Angle iron section of 25x25x5 mm (Twenty five in to twenty five in to five millimeters) ,thickness including hinges jamb,lock jamb,beed and welded continously with M.S. flat 40x4mm (forty in to four millimeters) and cleat for fixing MS. hold fast 40x4mm (forty in to four millimeters) of length 20cm ( twenty centimeter) complete in all respect i/c applying a coat of approved steel primer two coats after pre treatment of the surface or as directed by Engineer-in- Charge. including carriage of materials within all leads and lifts.
7.56
106
804
... More
Providing and fixing factory made ISI marked steel glazed doors, wondows and ventilators shutters side /top/centre huge with beading and all members such as F7D, F4B,K11B and K12B etc. complete of standard rolled steel section , joints mitres and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots including priming coat of approved steel primer , but excluding the cost of other fitting complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
502.5
162
81506
... More
Providing and fixing fly proof stainless steel wire mesh shutters having stainless steel 32 ( thrity two) gauge fly mesh of 304 grade with 144 holes per square inch if 0.5 mm dia wire and 1.4 mm aperture on both sides in existing aluminium shutters as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
12.56
934
11731
... More
Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm ( fifty into forty seven milimeter)with a wall thickness of 5mm (five milimeter) made out of extruded 5mm (five milimeter) rigid PVC foam sheet heat bend and mitred at corners and jointed with 2(two) Nos. of 150mm (one hundred fifty milimeter) long brackets of 15mmx15mm ( fifteen milimeter into fifteen milimeter)M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm ( ninteen milimeter into ninteen milimeter) M.S. square tube of 19 (ninteen0 gauge EPDM rubber gasket weather seal to be provided throughout the frame including fixing of door frame to wall with M.S. screws 100 (hundred)long with wooden or rawl plugs emedded in masonry complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
4.85
471
2284
... More
Providing and fixing to existing door frames 30mm (thrity milimeter) thick factory made wire mesh solid PVC door shutters consisting of frame made out of M.S. tube of 19 (ninteen) gauge thickness of size 19mmx19mm ( ninteen milimeter into ninteen milimeter) for style and 15mmx15mm (fifteen into fifteen milimeter) M.S. square tube for top, bottom and Lock rail M.S. frame shall have a coat of steel primer and covered with 5mm (five milimeter) thick PVC solid sheet heat moulded "C" channel of size 75mmx30mmx60mm (seventy into thrity into sixty milimeter) out of which 10mm (ten milimeter) shall be bent at 90 (ninety) degree towards inner side on front face of the door M.S. frame at lock rail shall be covered with 100mm (one hundred milimeter) wide PVC sheet out of which 10mm (ten milimeter) on both the edges shall be bent at 90 (ninety) degree on front face of the door and 85mm wide PVC sheet shall cover the M.S. frame at top, bottom and lock rail lof 70mm (seventy milimeter) on back side of door 5mm (five milimeter) thick 20mm (twenty milimeter) wide cross PVC sheet as gap insert for top and bottom rail, PVC sheet beading of 10mm thick, 15mm (fifteen milimeter) wide PVC sheet beading in to be stick internally in the back side of style and rails of door with solvent cement adhesive including fixing of G.I. wire mesh 85 (eighty five) G or 0.56 (zero point fifty six) dia wire fixed between PVC sheet of style and rail bent at 90 (ninety) degree on front face using 15mmx15mm (fifteen into fifteen milimeter) L-shape PVC beading nailed on style a rails including fixing shutter to existing door frame with M.S. butt hinges 100x58x1.90mm (one hundred into fifty eight into one point ninety) with necessary screws etc. complete including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
1.54
3706
5708
... More
Providing and fixing factory made slush doors 35mm ( thrity five ) milimetre thick commercial both side i.e. non decorated phenol bonded termite resistant and boiling water proff core of block board construction with full match commercial three ply veneer with vertical grain or cross band and face veneeer on both face of flush door ISI marked IS no 2202 of century ply board Ltd/Kit ply/grnne ply of its equilvent including black enameled M.S. butt hinges necessary screws etc as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
12.69
3096
39292
... More
Providing and fixing 19mm ( ninteen) milimetre thick water proof termite resistant commercial board of Uniply/ green ply/kit ply/duro ply//marino ISI marked for cup board shuter including 19mm thick shelves and back side of the cup board shall be of 8mm thick ply and all cut portins of shutter shall have 6mm/8mm thick hard wood edging. The shutter from out side shall be finished with 1mm thick lamination of century /greenlam/action tesa/merinolam of approved shade including fixing top PTMT handles 125mm long shall be provided in wood colour with nickle plates piano hinges including fixing with nickel plated piano hibnges with screws including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
7.2
3988
28718
... More
Providing and fixing 19 mm ( ninteen ) milimetre thick pre -laminated water proof commeercial board of century ply/kit ply exterior/interior grade ISI marked no 12823 for SBD shutter with 6mm ( six ) milimetre thick hard wood edging all roaund and PGI sheet lining inside of the shutters of approved shade etc. all complete. including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
1.08
1716
1854
... More
Providing and fixing glazing in aluminium door, window,ventilator shutters and partition etc with PVC/neoprens gasket etc. Complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid in basic item.) glazing with glass panes of 5.5mm thickness (weight not less than 13.75kg/sqm. All complete as per architectural drawings and the directions of Engineer-In-Charge including carriage of materials within all leads and lifts .
25.12
1236
31058
... More
Providing and fixing magnetic catcher Triple strip vertical type of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetra complete including carriage of materials in all leads and lifts.
4
256
1026
... More
Providing and fixing 65*35 mm( sixty five into thrity five) milimetre specail quality chromium plated brass cup board locks or ward robe locks with six levers including necessary screws including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge
2
291
583
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm diameter (Twenty five millimeters diametermeter) (heavy type) including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
11.2
510
5719
... More
Providing and fixing aluminium sliding door bolts (Barrel type) ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transperent or dyed to required colour or shade, with nuts and screws etc. complete for all floors, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.300 X 16 mm
5
168
843
... More
250 X 16 mm
3
147
442
... More
Providing and fixing aluminium tower bolts ,ISI Marked, anodised (Berrel type) (anodic coating not less than grade AC 10 as per IS: 1868) transperent or dyed to required colour or shade, with nuts and screws etc. complete for all floors, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge 250 X 10 mm
14
82
1148
... More
150 X 10 mm
39
52
2055
... More
Providing and fixing powder coated aluminium handles, transperent or dyed to required colour or shade, with nuts and screws etc. complete for all floors, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge 150 mm.
18
73
1316
... More
125 mm.
49
58
2881
... More
providing and fixing M.S. hooks and eyes with necessary screws etc. complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. i) 250 mm
49
87
4268
... More
providing and fixing aluminium door closer with necessary screws etc. complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
6
1040
6240
... More
Providing and fixing powder coated aluminium hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with necessary secrews etc. complete to suit shutter thickness complete (i) Twin rubber stopper as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
9
65
589
... More
Providing and fixing M.S. grills of required patterns in frames of windows etc. with M.S.flats, square or round bars including priming coat with approved steel primer all complete fixed to steel windows by weldings etc.fixed to steel windows by welding etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
270.3
165
44708
... More
Providing and laying Kota stone slab nosing edeging in steps of treads as per pettern and detail laid over 20mm (twenty milimetre ) (average) thick base of cement mortar 1:4 (one cement isto four sand) and jointing with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge. 19 mm (Ninteen milimeter) thick.
15.89
1867
29671
... More
Providing and laying mirror polished Kota stone slab flooring of size 55x55 CM (fifty five into fifty five centimeter) over 25 mm (twenty five milimetre ) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1:4 (one cement isto four sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
59.43
1401
83297
... More
Providing and laying Kota stone slab 25mm ( twenty five milimetre) thick in risers of steps, skriting, dado and pillar laid on 12mm (twelve milimetre) average thick cement mortar 1:3 ( one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
9.69
1571
15226
... More
Providing and laying Kota stone of size 55x55 CM (fifty five into fifty five centimeter) in flooring of approved shade as per detail slab flooring over 25 mm (twenty five milimetre ) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,excluding rubbing and polishing complete with base of cement mortar 1:4 (one cement isto four sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
42.65
919
39225
... More
Providing and laying 300*450mm ( three hundred into four hundred fifty milimetre) whitezlaged tiles of Nitco/Orient/Bell/Kajaria 6mm (six milimetre) in skriting risers of steps and dado 12mm ( twelve milimetre) thick cement plaster 1:3 (one cement isto three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of including rubbing and polishing complete with tiles of Medium shade pigment using 50% (fifty percentage) white cement and 50% (fifty percentage) ordinary cement as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
50.52
1186
59957
... More
Marle stone flooring with 18 mm thick marble stone, as per sample of Marble approved by Engineer in Charge, over 20 mm (twenty milimeter) average thick base of cement mortar 1:4 (1cement:4 sand) laid and jointed with grey cement sluury,including rubbing and polishing complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
4.34
3985
17297
... More
Smooth finishing of the exposed surface of RCC work with 6mm (six milimetre) thick cement mortor 1:3 (1 cement :3 sand) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
3.72
189
705
... More
Providing and fixing unistone/ garsa stone cladding 30mmx20mmx6mm (Thrity into twenty into six) milimeters size cladding in wall 12 mm (Twelvem) milimetersthick cement plaster in cement mortor 1:3( one cement: three sand) laid over andjointed with grey cement slurry mixed with piggment to match the slate/ tiles complete as per HPPWD specifications including carriage of aal labour equipments and material to various locationsthrough all mode of transportation in all leads and lifts, including all incidentental charges.
48.6
2091
101647
... More
Providing and fixing stair case railinghavibng M.S. pipe/ Bombay pipe 50 mm( fifty milimetre) dia hand rail in wooden colour with M.S. flat as per detail and baluster of 19mmx19mm and 12mm x12mm (ninteen milimetre into ninteen milimetre and twelve into twelve milimetre) M.S. solid square bars in comination of M.S. flat 40x6mm ( forty into six milimetre) with a cleat height of 85cm ( eighty five centimetre) at 30 cm ( thrity centimetre) centre to centre jointing in cement concrete steps . The vertical baluster to be welded / jointed with M.S. hollow hand rail and applying a coat of red lead paint complete as per approved drawings desigh and specification within all leads and lifts and as per direction of Engineer-in- Charge.
109.5
135
14783
... More
Providing and fixing 50mm ( fifty milimetre) dia M.S. hollow pipe hand rail of ramp, slip resisance with round ends at two level at 75 and 90 cm ((seventy and ninety centimetre) height and extended 30cm ( thrity centimetre) beyond the top and bottom on the ramp or as per drawing, design welded with 25mm ( twenty five milimetre) diametre baluster embedded in cement concrete @ 60cm (sixty centimetre) center to center and jointing weldijng at top alongwith M.S.hollow pipe as per approved drawing specification and as per direction of Engineer-in-charge.
278.27
135
37566
... More
Providing and laying six courses of water proofing treatment Dr. FIXIT Torchchild and Pidirete URP and Pidiproof torch with bitumen felt over roofs consisting of first, third and fifth courses of blow or resideual bitumen applied at 11.45 kg. eleven point forty five kilogram 1.20 one point twenty and 1.45 kg. one point forty five kilogram per sqm. of area respectively second and fourth course of roofing felt type 3 three grade I (hessain base finished bitumen felt) sixth and final course of stone girt 6mm six milimeter and down size or pea sized gravel spread at 6 cu.dm. or (0.006 cu.m.) per sqm. including preparation of surface excluding grading complete as per the instruction of Engineer-in-Charge including carriage of materials with up to all leads and lifts.
6.77
469
3179
... More
Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
23.3
810
18885
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
129.28
132
17091
... More
Applying Birla /JK white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
441.32
95
42234
... More
Painting two coats(excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter sand papering and stopping. (i) with enamel paint other than white as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
16.56
116
1926
... More
Distempering with 1st quality synthetic/acrylic distemper ( ready mixed) ofAsian /Berger/Dulux/Nerolac above Dado/skriting pf approved brand and manufacture of required colour to give an even shade on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per PWD specifications and as per direction of Engineer-in-Charge.
323.46
76
24712
... More
Painting two coats with premium enamel paint of Asian /Berger/Dulux/Nerolac above Dado/skriting pf approved brand and manufacture of required colour to give an even shade on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
90.79
154
13991
... More
6mm ( six milimetre ) cement plaster 1:3 ( One cement isto three coarse sand ) finished with a floating coat of neat cement and thick coat of lime wash on top complete. and as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labourequipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
84.79
194
16449
... More
15 mm (fifteen milimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrses,internal rounded angles,chamfers and / or rounded angles not exceeding 30 cm (thirty centimeter) in girth and finished even and sand papered smooth in cement mortar 1:6 (One cement isto six fine sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge
113.63
244
27828
... More
15 mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrses,internal rounded angles,chamfers and / or rounded angles not exceeding 30 cm (thirty centimeter) in girth and finished even and sand papered smooth in cement mortar 1:6 (One cement isto six fine sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
113.63
242
27510
... More
15 mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrses,internal rounded angles,chamfers and / or rounded angles not exceeding 30 cm (thirty centimeter) in girth and finished even and sand papered smooth in cement mortar 1:5 (One cement isto five fine sand): complete as per HP.PWD., specification volume-I (one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
129.28
249
32242
... More
Providing plinth protection with 40mm ( forty milimetre) thick interlocking paver block s of NTC with 23 cm (twenty three centimetre) dia half round RCC pipe for drainage purpose fixed over 10cm ( ten centimetre) thick cement concrete 1:4:8 ( one cement isto four sand isto eight graded stone aggregate) bedding as per drawings including entire carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge. .
50.76
2024
102764
... More
20mm (twenty milimeter) cement plaster in single coat on rough/fair side of brick/concrete/stone walls for interior/exterior plastering upto all floor level with Cement Mortar 1:4 (one cement is to four sand) including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth including entire carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. .
156.99
301
47254
... More
Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogamme) Of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HP. PWD specifications excluding cost of centring and shuttering including carriage in all leads,lifts and as per the direction of Engineer in charge.
19.15
35
687
... More
Providing back filling behind abutments, wing wall and retaing walls of granular materials complete as per drawings and technical specification MORD clause 1204.3.8 complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
13.5
1175
15873
... More
Providing weep holes in brick masonry/stone masonry,plain reinforced concrete abutment,wing wall, return wall with 100 mm (one hundred milimeter) diameter PVC pipe extended thrugh full width of structure with slope of 1:20 (one vertical isto twenty horizontal) t towards the drawing face complete as per HP. PWD. technical specifications clauses 614,709,1204.3.7 including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
41
274
11244
... More
Water Supply and Sanitary Installation
-
-
-
... More
Providing and fixing polytheline-Aluminium polythylene (PE-AL-PE) composite pressure pipes confirming to IS-15450-U.V. stabilized with carbon black having thermal stability for hot and cold water supply,capable to with stand temerature up to 80o C, including all special fittings of composite materials (Engineering plastic blend and brass insets wherever required) e.g. elbows,tees,reducers,couplers and connection etc,with clamp at 1.00 meter spacing. this includes the cost of cutting chases and including testing of joints complete. including carriage of materials upto all leads and lifts as per the direction of the Engineer-in-Charge. 1620 mm (20 mm O.D.Pipe)
70
419
29379
... More
2025 mm (25 mm O.D.Pipe)
116
455
52815
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials within all leads and lifts and as per the direction of Engineer in charge.75mm (seventy five milimeter)
41
221
9090
... More
110 mm (one hundred tenmilimeter diameter)
41
228
9381
... More
Making connection of GI distribution branch with GI main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete. 25mm to 40mm (tweny five into forty milimeter) nominal bore complete and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
1
596
596
... More
Providing and fixing PVC supreme/Kisan/Astralheal rest of supreme/ finolex conforming to IS marked including fitting the joints with approved adhesive including carriage of materials within all leads and lifts and as per the direction of Engineer in charge.75mm (seventy five milimeter)
2
116
233
... More
110 mm (one hundred tenmilimeter diameter)
2
123
248
... More
Providing and fixing PVC floor traps ISI marked of self cleaning design with PVC pipe complete including cost of cutting and making good the wall and floors etc, complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.110 mm inlet and 90 mm outlet
2
1005
2011
... More
110 mm inlet and 75 mm outlet
2
998
1997
... More
Providing and fixing soil, waste and ventilating pipes including filling the joints with approved adhesive complete as per HPPWD., specification volume-I ( one )including carriage of all labour equipment and materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge 75mm (seventy five milimeter)
15
343
5147
... More
110 mm (one hundred tenmilimeter diameter)
85
470
39963
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge 75 mm (seventy five milimeter).
6
92
555
... More
110 mm (one hundred ten milimeter)
14
106
1494
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge 75 mm (seventy five milimeter)
5
113
569
... More
110mm (one hundred ten milimeter)
11
156
1722
... More
Providing and fixing PVC cowl ISI marked including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.75 mm (seventy five milimeter)
2
92
185
... More
110mm (one hundred ten milimeter)
6
106
640
... More
Providing and fixing white vitreous China pedestal type water closet (European type W.C.pan) of green water closet EWC no 20079 size 39*36*57 cm with 10 litre low level PVC flushing cistern having dual flush system of Hindware or its equilvalent with fitting and brackets 40mm flush end 20mm over flow pipe with seal and lid fixed with C.P. brass hinges and rubber buffers with specials of standard make and mosquito proff coipling of approves municipal design complete including painting of fitting and brackets cutting and making good tha walls and fixed with jet pressure and intergal P or S trap including jointing the trap and soil pipe with adhesive of approved brand jet spray to be measured and paid for sepatrately including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
1
10030
10031
... More
Providing and fixing 32mm dia PVC flexible waste pipe of supreme /finolex for sink or wash basin including PVC waste fitting complete ncluding carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
2
235
471
... More
Providing and fixing GI inlet connect for flush pipe connecting with WC pan complete. including carriage of material up to all leads and lifts and as per the direction of Engineer-in-Charge.
2
123
247
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) white vitreous china Orissa pattern W.C. pan no 2004 of size 530x410 (Five Hundred thrity in to four hundred ten) millimeter with 100 ( one hundred) millimeter sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .
1
6317
6318
... More
Providing and fixing vitreous china wash basin no 10088 without pedestal size 46x33 cm of hind ware or its equipment with single hole for for pillar tap 15mm CP brass pillar tap,32mm C.P brass waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting complete mirror to be measured and paid for seperately including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .
1
4088
4088
... More
Providing and fixing vitreous china wash basin no 10088 with pedestal size 55x40 cm of hind ware or its equipment with single hole for for pillar tap 15mm CP brass pillar tap,32mm C.P brass waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting complete mirror to be measured and paid for seperately including carriage of all labour equipment and material to various location through all modes of transportation in all leads ifts and all incidental charges .
1
7345
7346
... More
Providing and fixing white vitreous china flat back half stall urinal of size 39x37.5x59 cm ( fthrity nine into thrity sevenpoint five into fifty nie centmetre) with white PVC outomatic flushing cistern,with fittings,standard size CP brass flush pipe, spreadrs with unions and clamps. (all in CP brass) with waste fittings as per IS:2556, CI trap with out let grating and other couplings in CP brass, including painting of fittings and cutting and making good the walls anfd floors wherever required: complet. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.flat back urinal large No 60002 of Hindware with 10.00 ltr (ten litres) PVC automatic flushing cistern.
1
11941
11941
... More
Providing and fixing 32 mm ( thrity two milimetre) dia M.I. unionfor wash basin and sink including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
296
592
... More
Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cm (forty five centimeter) and 15 mm (fifteen milimeter) nominal bore. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
77
155
... More
Providing and fixing 32 mm ( thrity two milimetre) diametre C.P. waste for wash basin or sink complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
252
505
... More
Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
4
75
304
... More
Providing and fixing 600mm x 450mm ( six hundred milimetre into for hundred fifty milimetre ) bevelled edge mirrior of superior glass (of approved quality) complete with 6mm (six milimeter ) thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.
2
1200
2401
... More
Providing and fixing CP. Brass Towel Rail ISI marked IS no 8931 and 8934 of Jal/Ess complete. Fixed to wooden plugs with C.P brass screws. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a) 600mmx20mmmm
2
575
1151
... More
Providing and fixing liquid soap container with C.P Brass lid and brackets fixed to wooden plugs with C.P brass screws plastic container including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
2
232
465
... More
Providing and fixing chromium plated brass toilet paper holder.complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
2
558
1117
... More
Providing and fixing 8 mm (eight milimeter) dia C.P./S.S. jet with flexible tube upto 1.00 m (one meter) long with S.S. triangular plate to european type W.C. of quality and make as approved by the engineer in Charge complete. and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
1
565
565
... More
Providing and fixing 600mm x 120 mm x 5mm (six hundred into one hundred twenty into five milimeter) glass shelf ISI marked IS no 8931 and 8934 of Jal/ESS with edge round off supported on anodised aluminium angle frame with C.P. Brass bracket and guard rail complete, fixed to 40 mm (forty milimeter) long screws. rawl plugs etc complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
857
1716
... More
Providing and fixing CP brass bib tap of approved quality confirming to ISI mrked IS no 8931 & 8934 of Jal/ESS of approved quality superior or heavy type and coloura of prayag polynets syonet complete 15 mm (fifteen milimeter) nominal bore complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
957
1915
... More
Providng and fixing C.P brass stop cock ISI mrked IS no 8931 & 8934 of Jal/ESS complete 15mm (fifteen milimeter) nimonal bore as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
1099
2200
... More
Providng and fixing C.P brass angle valve ISI mrked IS no 8931 & 8934 of Jal/ESS complete 15mm (fifteen milimeter) nimonal bore without nuts and bolts as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
2
921
1843
... More
Providing and fixing brass full way valve with Wheel including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge 15mm ( fifteen milimetre)
2
590
1181
... More
Providing and fixing C.P. brass angle valve without nuts and pipe including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. 15mm ( fifteen milimetre)
2
533
1067
... More
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .75 mm (seventy five milimeter)
2
277
555
... More
110 mm (one hundred milimeter)
2
334
669
... More
Providing and fixing PVC double equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .75 mm (seventy five milimeter)
2
604
1209
... More
110 mm (one hundred milimeter)
2
903
1807
... More
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge . 75 mm (seventy five milimeter)
2
241
484
... More
110 mm (one hundred milimeter)
2
369
740
... More
Providinng and fixing PVC offfset 45⁰ ISI marked if supreme /Finox including fixing with approaved adhesive comlete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge . 75 mm (seventy five milimeter)
2
177
356
... More
110 mm (one hundred milimeter)
2
220
441
... More
Providing and placing on trace (at all floor levels) polyethylene water storage tank havink tripple layer of Supreme/ Finolex IS 12701 marked, with cover and suitable locking arrangement and making neceassry hole for inlet, outlet and overflow pipes but without fittings and the base support for tank comlete (i) 1000 litre (one thausand litres) net capacity tank . complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
1000
11
11800
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm (Twenty milimeter) nominal size) finished with a floating coat of neat cement complete as per standard design inside size 90x80cm and 45cm deep ( ninety into eighty centimeter) deep including C.I cover with frame(medium) with common burnt clay F.P.S ( non modular) bricks of class designation 7.5.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
10
10254
102548
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm (Twenty milimeter) nominal size) finished with a floating coat of neat cement complete as per standard design inside size 120x90cm ( One hundred twenty into ninety centimeter) deep including C.I cover with frame(medium) with common burnt clay F.P.S ( non modular) bricks of class designation 7.5.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
5
23246
116233
... More
Constructing brick masonry Chamber for underground C.I. insppection chamber and bends with in brick work in cement mortar 1:4 (one cement : four coarse sand) sluice valve, with C.I. surface box 100mm (One hundred millimeter) top diameter, 160mm ( one hundred sixty millimeter) bottom diameter and 180mm ( one hundred eighty) millimeter deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 (twenty) millimeter nominal size ) , including necessary excavation, foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 ( forty) millimeter nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 ( twelve) millimeter thick, finished with a floating coat of neat cement complete as per standard design w ith common burnt clay F.P.S.(non modular) bricks of class designation 7.5 complete as per direction of the Engineer-incharge.
-
-
-
... More
Supplying and fixing R.C.C. cover without frame for manholes 455x610 ( four hundred fifty five in to six hundred ten)millimeter rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg ( twenty three kilogram) including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .
15
5856
87848
... More
Providing and laying 20mm nominal bore in tarenches glavinesed mild steel tube ( medium grade) with G.I. fitting including trenches and refilling etc complete including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges .
50
416
20840
... More
Providing and fixing to wall ceilling and floor glavanised mild steel tube ( Medium grade) tube fitting amd clamps including making good thea wall ceiling and floor including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. 15mm dia
30
367
11031
... More
Supplying fixing cast iron cover with rectangle frame 445x610 mm light duty single sealpatteern having weight not less than 23 kg including carriage of material within all leads and lifts and as per the direction of Engineer-in-Charge.
6
1588
9533
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI: 3989 marked including fixing with approved adhesive etc. complete 110 mm (One hundred ten milimetre) dia finolex make including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
33
470
15515
... More
Providing and fixing 1.00HP ( one horse power) water lifting pump ISI marked of Kirloskr/ Cromption including accessories and making necessary connection as required at site for its functioning complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
1
6529
6530
... More
Providing and laying in trenches, galvanised mild steel tubes 20mm dia with G.I.fitting including trenching and refilling including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
35
416
14588
... More
Providing and laying in trenches, galvanised mild steel tubes 15mm dia with G.I.fitting including trenching and refilling including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
25
367
9193
... More
Providing and laying 150mm (one hundred fifty milimetre) nominal bore /diametre (to level or slopes) PVC pipe grade A and jointing with approved adhesive including testing of pipes and joints complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
75
648
48600
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements