Public Works Department Tender

Providing and laying of hot applied thermoplastic compound as per MORTH specification 803 & IRC: 34, 2.5mm (two point five milimeter) thick including reflectorising glass beads @ 250 gms per sqm (two hundred fifty gms per sqm), thickness of 2.5mm (Two point five milimeter) is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level, uniform and free from steaks and holes items as per drawing and technical specifications and direction of Engineer-in-charge including carriage of materials/machinery required to execute the work in all leads and lifts and other incidentials. The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying cement concrete for plain/reinforced cement concrete 1:4:8 (one cement: four sand: eight graded crushed stone aggregate 25mm (twenty five millimetres) nominal size in open foundations complete as per drawing and MORD 2014 technical specifications clause 802, 803, 1202 and 1203 as per the direction of the Engineer-in-charge , including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royalty, Malkana, toll tax , goods service tax, labour cess or other taxes imposed by the Government.

Construction of pavement with 80mm ( eighty millimetre) thick concrete blocks conforming to clause 1504.2.1 of MORD specifications, paved and compacted over a thin bedding of sand layers (material meeting the requirement of Table 1500.6 of these specifications) of specified grading to be spread over a properly constructed and profiled base course and bounded by properly edge restraints conforming to clause 1504.2.2 and 1504.2.3 of these specifications and complete the work to the satisfication of Junior Engineer and Assistant Engineer of the area. (Subject to further entire satisfaction of the Engineer-in-Charge), including carriage of materials in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rates are inclusive of octroi, royality, Malkana, toll tax, GST, sale tax or other taxes imposed by the Government. The pavers should be from one of the make of NITCO Modren,NTC,GITCO or its equivalent.

Providing and laying mechanically mixed and vibrated concrete for plain/ reinforced cement concrete M-20 ( M twenty ) grade in open foundation of culvert complete cement contents not less than 300 kg (three hundred kilogram) per cubic metre on ground or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work in abutments, piers and return walls etcetera as per drawings and MORD 2014 technical specification clause 802, 803, 1202 ans 1203 and as per direction of Engineer-in-charge, including carriage of material within all leads and lifts and other incidential . The rate includes octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.