Public Works Department Tender

Steel reinforcement (Tata Tiscon/sail make) for Reinforced cement concrete work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm(zero point fifty millimetre) (+ 0.05 %) total coated thickness with zinc coating 120gms (one hundred twenty grams) per sqm as per IS: 277, in 240 (two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns. Sheet should have protective guard film of 25(twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12m (twelve metre) or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm(five point five into fifty five millimetre)) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (zero point fifty millimetre)(+0.05 %(plus zero point zero five percentage)) total coated thickness, Zinc coating 120gms(one hundred twenty grams) per sqm as per IS: 277(two hundred seventy seven), in 240(two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primeron both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns using self drilling/ self tapping screws complete Ridges plain (500 - 600mm(five hundred to six hundred millimetre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (zero point fifty millimetre)(+0.05 %(plus zero point zero five percentage)) total coated thickness, Zinc coating 120gms(one hundred twenty grams) per sqm as per IS: 277(two hundred seventy seven), in 240(two hundred forty) mpa steel grade, 5-7(five to seven) microns epoxy primeron both side of the sheet and polyester top coat 15-18(fifteen to eighteen) microns using self drilling/ self tapping screws complete Crimp curve as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.