Public Works Department Tender

Earth work in excavation for all type of road structure as retaining walls, breast walls, culverts drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock, hard rock chiseling/ wedging out rocks (where blasting is prohibited) as per growing and MORD technical specification Section 300 and 1600 as per the directions of the Engineer-in-charge including setting out, shoring and bracing, removal of stumps and other deleterious material and disposal of material up to any leads and lift including dressing of sides bottom and back filling in trenches with excavated suitable/ approved materials including shoring and strutting, pumping and bailing out water (surface and sub soil water) up to any depth and any quantum of water including cleaning of slush which may arise out during dewatering and as per direction of Engineer-in-charge including carriage of materials within all leads llifts and other incidentals. The rate is including the octroi, royality Malkana, sale tax, toll tax , GST or any other taxes imposed by the Government.

Providing and laying cementconcrete 1:3:6 (1 cement:3 sand:6graded stone aggregate 40mm (Forty Millimetre)nominal size) and curring complte including cost of from work in foundation complete as per drawing and technical specification clause 802,803, 1202 and 1203 with in all leads and other incidentl and as per the direction of Engineer-in-charge. including carriage of materials within all leads, lifts and as per direction of Engineer-in-charge including carriage of materials within all leads llifts and other incidentals. The rate is including the octroi, royality Malkana, sale tax, toll tax , GST or any other taxes imposed by the Government.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.