Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date2 Apr 2022
Closing Date8 Apr 2022
Tender AmountRefer Documents
Costs
EMD
₹ 13,61,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_PWD_59037_1Bid Award Id
ViewTender No
02-05 dated 01.04.2022Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing form work with steel plates 3.15 (Three point One Five ) millimeters thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimeters, so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden/steel battens and ballies in all heights of propping and centering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work.as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-I, including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidental charges in: Foundations, footings, bases of columns, etc. for mass concrete etc.
368.18
-
-
Suspended floors, roofs, landings, balconies and access platform upto all floor levels.
1576.05
-
-
Columns, Pillars, Piers, Abutments, Posts and Struts etc. upto all floor levels.
1106.4
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
2180.13
-
-
Edges of slabs and breaks in floors and walls under 20cm( Twenty Centimetre) wide upto all floor levels.
371.49
-
-
Stairs, (excluding landings) except spiral stair cases upto all floor levels.
71.79
-
-
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. upto all floor levels.
140.19
-
-
Providing and laying in position cement concrete of specified grade mechanically mixed and vibrated excluding the cost of centering and shuttering in all work up to plinth level with cement concrete 1:2:4 (One cement : Two coarse sand : Four graded stone aggregate 20 mm( twenty millimeter) nominal size)within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
0.65
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in all work up to plinth level : 1:5:10 (One cement : Five coarse sand: Ten graded stone aggregate 40 mm( forty Millimetre) nominal size)within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
119.57
-
-
Providing and laying cement concrete 1:4:8 [One cement isto four sand isto eight graded crushed hard stone aggregate 40 (Forty) millimeters nominal size] and curing complete, excluding cost of centering and sshuttering and shuttering in foundation and plinth. as per HP.PWD specification including carriage of all labour equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
101.41
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering in all work up to plinth level with cement concrete : 1:3:6 (OneCement : Three coarse sand) : Six graded stone aggregate 20 mm( Twenty Millimetre) nominal size within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
59.89
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 ( M-Twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all works upto plinth level.within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
357.7
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 ( M-Twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all works above plinth level upto floor all level within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
768.61
-
-
Providing and Laying Cement Concrete work 1:1.5:3 (one cement : One point five coarse sand : Three graded stone aggregate 20 mm ( twenty millimetre nominal size).Mechanically mixed and vibrated for compacting and curing complete excluding cost of form work and rainforcement for rainforce cement concrete .Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. All work upto Plinth Level.
13.59
-
-
Providing and Laying reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°( Fifteen Degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : One point Five coarse sand : Three graded stone aggregate 20 mm( twenty Millimetre) nominal size).Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
28.96
-
-
Providing and laying upto all floor levels cement concrete work 1:1.5:3 (one cement and one and half sand and three graded stone aggregate 20 mm nominal size) mechaniclly mixed and vibrtated to give smooth and even surface inclduding centring and shuttering but excluding cost of reinformement and curing complete mechanical mixed and vibrated for compecting reinforced concrete upto all floor level including carriage of materials in all leads and lifts :- String courses, coping, bed plates, anchor blocks, plain windows sills and the like
1.5
-
-
Moulding as in comices, window sills etc. exceeding 15cm in girth
1.5
-
-
Reinforced cement concrete work mechanically mixed and vibrated in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (One cement : One point Five coarse sand : Three graded stone aggregate 20 mm( twenty Millimetre) nominal size).With in all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
5.16
-
-
Steel reinforcement for RCC work including straightening , cutting , bending,binding placing in position and including cost of binding wire etc., all complete upto all floor levels within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. Thermo - Mechanically treated bars of grade fe -500D or more.
144083
-
-
Providing and fixing in position polyster basker rod in expansion joints as per drawing and specifications complete in all respect the horizontal/Vertical joint shall be filled with fixpoly sulphadesealent 42 ( Forty two)dia and poly sulphate sealant 41-G ( Forty One) as per HPPWD specification, including carriage of all labour equipment and material to various .Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
119.05
-
-
Providing Brick work in rat trap bond with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( Seven point Five) in superstructure above plinth level up to floor all level in all shapes and sizes in : Cement mortar 1:4 (One cement : Four coarse sand)Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
146.29
-
-
Providing Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( Seven point Five) in superstructure above plinth level up to floor all level in all shapes and sizes in : Cement mortar 1:6 (One cement : six coarse sand) .Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
68.29
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5( Seven point Five) in superstructure above plinth level up to floor all level. Cement mortar 1:3 (One cement :Thre coarse sand)Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
1362.81
-
-
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement :Six coarse sand : Twelve graded stone aggregate 20 mm( Twenty millimetre nominal size) upto plinth level with Cement mortar 1:6 (One cement : Six coarse sand)Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
80.08
-
-
Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (One cement : Six coarse sand) Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
141.42
-
-
Boulder filling tightly hand packed under floor including watering, ramming, consolidating with hand durmot etc. complete as per HPPWD specification 1990 (one thousand nine hundred and ninety) Volume-I including carriage of all labour equipments and materials to various location through all modes of transportatio nwithin all leads, lifts and other indicntial charges.
123.61
-
-
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm,( Five to twenty centimetre) in recharge pit, in the required thickness, Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
10.74
-
-
Providing and fixing factory made uPVC white/ colour casement/casement cum fixed glazed windows specification:- Zendoe series outer fram 12601 ( 70mmx64mm) sash 12617 (70mmx70mm) Z-Mulion T-86 (70mm x 50mm), coupling 12358 (70mm) including shutter with chamber thikness 2.60mm and GI frame thickness 1.20 to 2.00 mm and 6.00mm+ 12mm + 6.00mm DGU toughned glass gap filled with argon gass fixed with thermoplastic elastomer (TPE gasket, including Zinc alloy (whie powder coated) casement handles, Friction Syay/ 2D hinges/ but hinges, espag multipoint locking sytem, locking stricker complete the gap between frame and adjacent finised wall shall be filled with weather proof sillicon sealant over backer road of require size and of approved quality, all complete as per approved drawing & directiuon of Engineer-in-Charge including carriage of material with in all lead and lift ( Complete job i/c fitting etc.).
140.13
-
-
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm ( One Point Sixty to zero Point Two Millimeter ) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm (One Hundred X Eight Millimeter) size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing (Single / double glass panes and silicon sealent shall be paid separately) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. a) caseement door with top hung ventilator with 3D and S.S. friction hinges (400x19x1.9mm) (Four hundred X nineteen X one point nine millimeter) made of (big series) frame 67 x 64mm ( Sixty seven X sixty four millimeter) sash 67x110mm ( Sixty even X One hundred ten millimeter ) & mullion 67x 80mm ( Sixty seven X Eighty millimeter ) all having wall thickness of 2.3± 0.2mm ( Two pint three to zero point two millimeter) and single glazing bead/ double glazing bead of appropriate dimension. (Area of dood upto 3.50 sqm (Three point fifty square meter).
104.76
-
-
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 ( Fifty ) micron) work for doors ,windows ,ventilators and partitions with extruded built up standard tubular sections /appropriate Z section and other section of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junction i.e. at top bottom and sides with required EPDM rubber /neoprene gasket etc, Aluminium section shall be smooth ,rust free, straight, mitred and jointed mechanically wherever required including cleat angle , aluminium snap beading for glazing /paneling ,CP brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. a) For frame of door and window.
150
-
-
b) For shutter of doors window & ventilators including providing and fixing hinges/pivots ans making provision for fixing of fitting wherever required including the cost of EPDM rubber /neoprene gaskit required . Powder coated aluminium (minimum thickness of powder coating 50 micron).
160
-
-
Providing and fixing 3mm thick ACP sheet, in panelling fixed in aluminum doors windows shutter and partition frames with CP brass/stainless steel screws etc. complete as per architectural drawing and directions of engineer -in-charge.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
40
-
-
Providing and fixing double glazed hermetically sealed glazing in aluminium windows vertilators and partition etc. with 6 mm(Six millimeter) thick clear float glass both side, having 12 mm (twelve millimeter) air gap , including providing EPDM gasket perforated aluminium spacers, desiccants sealant etc. as per spacification drawings and direction of Engineer -in-charge complete.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
20
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm( twenty seven Point five centimetre) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
37.5
-
-
Providing and fixing ball bearing for rolling shutters within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
3
-
-
Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm(ten point zero Square meter) and upto 16.80 sqm (Sixteen Point Eighty Square meter)in the area.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
37.5
-
-
Providing and fixing ESS-ESS grills of 25 mm X 25 mm (Twenty Five X Twenty Five millimeter) with 1.50 mm (One point Fifty millimeter)thick of size 32mm X 32mm (Thirty Two X Thirty two millimeter) heavy grade superior type pipe fixing with necessary screws , hinges and locking arrangement complete in all respect up to all floor level as per approved drawing & direction of Engineer -In- Charge including carriage of matterials with in all leads and lift.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
30
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. Fixed to openings /wooden frames/Steel Frames with rawl plugs screws etc.
1442.55
-
-
Providing and fixing stainless steel fly wire mesh upvc frame in penable part of window with spring and roller inbuilt in bug mesh with necessary screw etc. complete within all leads and lift anc carriage of material in all respect as per direction of Engineer-in-Charge.
140.13
-
-
Providing and fixing 1st class teak wood moulded handrail out of 6.25 x 7.5 cm ( Six point twenty five into Seven Point Five centimetre)with necessary screw etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
90.88
-
-
Providing and fixing 19 mm ( Ninteen millimeter) thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of material in all leads and lifts within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
54.44
-
-
Providing and fixing 19 mm ( Ninteen millimeter) thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc. complete including carriage of material in all leads and lifts.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
160.02
-
-
Providing and fixing 8mm thick (eight melemeter) ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including all leads lifts and carriage of thick within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
54.44
-
-
Providing and fixing 1.00 mm ( one point zero millimeter)thick decorative high pressure laminated sheet of plain / wood grain in gloss /matt/suede finish with high density protective surface layer and reverse side of sdhesive bonding quality conforming to IS :2046 Type Including cost of approved quality within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
54.44
-
-
Providing and fixing square edged cover fillets 19 X 6 mm ( ninteen into Six millimetre) section in first class deoder wood including mitring at junction with wooden screws /nials etc. complete including carriage of material in all leads and lifts, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
415
-
-
Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm ( Eighteen X Five millimetre) fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre laminated particle board. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
415
-
-
Providing and fixing 2nd class teak wood moulded corner beading of triangular shape to the junction of panelling etc. with iron screw, plugs and priming coat on unexposed surface etc in 50X50 mm ( Fifty X Fifty millimetre) base and height.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
460.06
-
-
Providing and fixing 1st class rai wood panelling ( plain lining ) tongued and grooved, including wooden plugs complete with necessary screws etc .complete 20 mm ( Twenty millimetre ) thick.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
462.89
-
-
Providing wood work in 2nd class deador wood in frames of false panelling ,ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
5.52
-
-
Providing and fixing triple strip vertical type magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
166
-
-
Providing and fixing 125mm bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
136
-
-
Providing and fixing 150 mm( One hundred fifty Millimetre) size ISI marked C.P. soft closing hinges with nuts and screws etc. complete, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
125
-
-
Providing and fixing 50 mm( fifty millimetre) Size special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
23
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg( thirty Six Kilogram to Eighty Kilogramme) and door width from 701 mm to 1000 mm ( seven hundred one Millimetre to One Thousand Millimetre), with double speed adjustment with necessary accessories and screws etc. complete.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
24
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. 1) 300 x 16 mm ( Three hundred X Sixteen Millimetre)
20
-
-
250 x 16 mm ( Two hundred fifty X Sixteen Millimetre)
35
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. 200 x 10 mm ( Two hundred X Ten Millimetre)
118
-
-
150 x 10 mm ( One hundred fifty X ten Millimetre)
216
-
-
Providing and fixing 125mm ( one Hundred twenty five Millimetre )aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
334
-
-
Providing and fixing 200 mm ( Two hundred Millimetre)bright finished brass hard drawn hooks and eyes. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
60
-
-
Providing and fixing G.R.C. (Unistone) 12mm( Twelve millimetre) With deep recessed square cut (1cm x 1cm) cladding on R.C.C.surface side as on faces of Arch masonry walls etc.on 12mm. ( Twelve Millimetre)thick cement plaster 1:3(One cement: Three sand) jointed withthe range of chemical adhesive plaster and i/c scaffolding etc. complete.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
118.62
-
-
Providing and fixing all weather proof ACP imported sign panel all weather proof multy colour computerised reflective digital panel 3mm ( Three millimetre)thick ,mounted on poweder coated G.I. frame work fixing / hanging with wall or ceiling etc. with specified clamps and G.I. wire and rawl plugs etc.complete Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
128.31
-
-
Providing and laying 60mm (sixty millimeter) thick factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm ( fifty millimetre) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra and. complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. .
367.47
-
-
Providing and fixing 13( Thirteen ) ply 19mm ( Nineteen Millimetre) thick WI-parquet/ Action TESA or equivalent (Clip -in-prelaminated ) wooden flooring (HDF) over CC base with polythene sheet and theromo sheet cushion below etc. complete . Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
227.95
-
-
Cement concrete flooring 40mm ( Forty Millimetre) thick in cement concrete 1:2:4 (One cement : two coarse sand : Four graded stone aggregate 20 mm( twenty Millimetre) nominal size, finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
273.74
-
-
Providing and laying 600x 600 mm( six hundred X six hundred Millimetre) size vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laidon 20mm (Twenty millimeter) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg( Three Point three zero Kilogram)/ square metre including grouting the joints with white cement and matching pigments etc. complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
966.48
-
-
Providing and laying Ceramic glazed floor tiles of size 300x300 mm ( Three hundred X three hundred millimetre ) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm( twenty Millimetre) thick cement mortar 1:4 ( One Cement : Four Coarse sand), Jointing with grey cement slurry @ 3.3 kg( Three Point three zero Kilogram)/ square metre including pointing the joints with white cement and matching pigment etc., complete.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
92.55
-
-
Providng and laying 40 mm ( Forty Millimetre ) thick rubbed red manadana sand stone flooring over 20 mm ( Twenty millimatre) (average) thick base of cement mortar 1:5 (One cement : Five coarse sand), including pointing with cement mortar 1:2 (One cement : Two stone dust) with an admixture of pigment to match the shade of stone. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
161.44
-
-
Providing and laying white makrana marble stone flooring with 20 mm ( Twenty Millimetre) thick as per sample of marble approved by Engineer-in-charge, over 20 mm( Twenty millimatre) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
19.26
-
-
Providing and fixing 13( Thrteen ) ply 19mm ( nineteen millimetre) thick WI-parquet/ Action TESA or equivalent (Clip -in-prelaminated ) wooden skirting, dado etc. complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
13.45
-
-
Providing and laying 600x600 mm( six hundred X six hundred Millimetre) size vitrified tiles (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm( twelve Millimetre) thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg( Three Point Three Kilogram )per Square metre including grouting the joint with white cement & matching pigments etc. complete .Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
49.58
-
-
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve Millimetre) thick bed of cement Mortar 1:3 (One cement: Three coarse sand) and jointing with grey cement slurry @ 3.3kg ( Three Point Three zero Kilogram)per Square metre including pointing in white cement mixed with pigment of matching shade complete.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
219.84
-
-
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab/ marbal stone/ granite stone etc.
117.6
-
-
Providing and fixing polycarbonated transparent sheet 1.20mm( One point Twenty millimetre) thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
234.28
-
-
Providing and fixing sandwich puff roofing with top and bottom skin of 0.60mm (Zero point six zero milimetre) and overall thickness of puff 40mm (forty milimetre) and weight of puff 35-37 cum thick prepainterd steel sheet in roofing with hot dipped metallic zinc coasted sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 ( five) micons primer coating to back coast of polyester of 5 microns over 5 microns primer coating including fixing with screws, prepainted iron J or L hooks, bolts and nuts 6mm(six milimetre) dia with prepainted limpet and rubber washer complete with all accessories as required as per specifications. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. .
1289.93
-
-
Providing ridges or hips of width 60 cm( Sixty Centimetre) overall width with prepainted plain sheet of tata durashine 0.45mm (Zero point four five) thick fixed with polymer coated J or L hooks, bolts and nuts 8 mm( Eight Millimetre) dia G.I. limpet and bitumen washers complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
82
-
-
Providing valleys of 90 cm ( Ninety centimetre) wide overall in prepainted plain sheet of tata durashine 0.45mm (zero pont four five) thick fixed with polymer coated J, or L hooks, bolts and nuts 8 mm( Eight Millimetre) dia G.I. limpet and bitumen washers complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
36.4
-
-
Providing and fixing flushing 40 cm( Forty Centimetre ) overall width with prepainted plain sheet of tata durashine 0.45mm (zero point four five millimeter) fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 ( One cement : Three coarse sand). Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
52.4
-
-
Providing and fixing 30 cm ( thirty Centimetre) wide, 120 cm( One hundred twenty Centimetre) overall box type prepainted steel sheet of tata durashine of 0.45mm (zero point four five millimeter) thick gutter size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
210.8
-
-
Providing and fixing prepainted stainless steel snow guard with necessary screw, fitting etc. complete. Colour should be same as that of roof colour.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
250
-
-
Providing and fixing Single socketed pipes. 150 mm( One Hundred Fifty Millimetre) diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(Ten millimeter) gap for thermal expansion, Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
72
-
-
Providing and fixing on wall faces PVC accessories for rain water pipes including filling the joints with approved adhesive complete, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) PVC plain/ Door Bend 150mm (One hundred and fifty m illimeter) bend.
24
-
-
PVC Shoe 150mm (One hundred and fifty millimeter)
12
-
-
Providing and fixing M.S. BP Sheet 2mm( Two millimeter ) thick in eaves board/ facia/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
134.96
-
-
Structural steel work including hpllow section riveted, bolted or welded in built up sections, trusses and framed work/ in beam channel, Gutter etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
52155
-
-
Steel work includig hpllow section welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
5204.35
-
-
Providing and fixing hand rail of 50mm( Fifty millimetre) dia. and 4mm( Four Millimetre) thick by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
152
-
-
15 mm ( fifty millimeter)cement plaster in cement morter 1:6 (One cement :Six sand) in single coat on the rough side of brick /concrete /stone walls for interior plastering upto all floor level including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 30 cm(Thirty Centimeter) in girth and finished even and smooth including carriage of materials within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
1514.35
-
-
15 mm ( fifty millimeter) cement plaster in cement morter 1:6 (One cement : six sand) in single coat on fair side of brick /concrete /stone walls for interior plastering upto all floor level including arrises, internal rounded angles chamfers and / or rounded angles not exceeding 30 cm in girth and finished even and smooth including carriage of materials within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
1514.35
-
-
20 mm( Twenty Millimetre) Thick cement plaster to rough surfaces of brick/ stonr/ concrete wall with cement mortar 1:4 (One cement: Four fine sand) with all floor level including arrises, internal rounded angles chamfers and/ or rounded angles not exceeding 30cm in girth and finished even and smooth including carriage of material within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
141.27
-
-
6 mm( Six Millimetre) cement plaster 1:3 (One cement :Three fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
2003.48
-
-
Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10Sqm( Zero Point Nine Zero litre Per Ten Square Metre) over an under coat of primer applied @0.75 ltr/10 sqm( Zero point seventy five litre per ten square metre) of approved brand and manufacture within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
642.55
-
-
Polishing required coats with freash polish on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust, and sand papered smooth and including a coat of wood filler, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
836.99
-
-
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm ( Zero Point Nine Zero litre Per Ten Square Metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm( Zero point eight zero litre per ten Square metre) of approved brand and manufacture within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
628.58
-
-
Providing and applying white cement based putty of average thickness 1 mm,( One Millimetre ) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
4903.87
-
-
Distempering with dry distemper of approved brand and manufacture ( two or more coats ) of required shade on new work, over and including water thinnable priming coat to give an even shade within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
2003.48
-
-
Finishing walls with textured exterior paint of required shade: New work Two or more coat applied @ 3.28 ltr/10 sqm ( Three point two eight litre per ten square metre)over and including priming coat of exterior primer applied @ 2.20kg/10 sqm( two point two zero kilogram per ten square metre) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
1059.94
-
-
White washing with lime to give an even shade on new work (three or more coats) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
146.7
-
-
Wall painting two coat with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grm/ litre( Fifty gram per litre) of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
1968.76
-
-
Making plinth protection 50mm( Fifty millimetre) thick of cement concreten1:3:6 (One cement : Three coarse sand Six Six graded stone aggregate 20 mm( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
85.78
-
-
Constructing course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm( Fifteen X twenty two centimetre) in cement mortar 1:6 (One cement :six Sand) and inside plastring with cement plaster 1:3 (One cement: Three Sand) including earth work and laying 10 cm( ten centimetre) cement concrete in 1:5:10 (one cement : five Sand : ten graded stone aggregate) of 40 mm( Forty millimetre) nominal size and 7.5 cm( seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate of 20 mm( twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
155.96
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry 4.40 kg/sqm( four point four zero kilogram per square metre0 mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm ( twenty millimetre) cement plaster 1:3 (One cement : three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm (one point seven zero kilogram) of area.
(iv) IVth course of 400( four hundred) micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm( one hundred millimetre) wide and pasted to each other with bitumen @ 1.7 kg/sqm (One point seven zero kilogram per square metre) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
90.06
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm ( one hundred millimetre) sand cast Iron/ PVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm( five hundred eighty X four hundred forty millimetre) with integral type foot rests within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
7
-
-
Providing and fixing vitreous China dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre (Ten) low level flushing cistern with fitting and brackets, 40 mm( Forty Milimerter) flush bend, 20 mm (Twenty millimetre) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
8
-
-
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
15
-
-
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
8
-
-
Providing & fixing white vitreous china flat back half stall urinal of size 580 x 380 x 350 mm with white PVC automatc flushing cistern, with fitting, standard size CP brash flush pipe, speaders with unions an clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet gratng and other couplings in C.P. brass, including painting of fitting and cutting and making good the walls and floors wherever required, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
6
-
-
Providing and fixing White Vitreous Chaina Wash basin size 630x 450mm (Six hundred thirty X Four hundred fifty millimeter) with a pair of 15 mm (Fifteen millimetre ) C.P. brass pillar taps with C.I. brackets, 32mm (thirty to millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
16
-
-
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
16
-
-
Providing and fixing 32mm (Thirty two millimeter) dia C.P. brass chain and rubber plug complete for sink or wash basin: within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
16
-
-
Providing and fixing 600x450 mm( Six Hundred into Four Hundred Fifty millimetre ) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
16
-
-
Providing and fixing PTMT liquid soap container 109 mm ( One Hundred Nine millimetre) wide, 125 mm ( One Hundred Twenty Five millimetre) high and 112 mm ( One Hundred Twelve Millimetre) distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighting not less than 105 gms ( One Hundred Five Gms) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
10
-
-
Providing and fixing PTMT towel ring trapezoidal shape 215 mm ( Two Hundred Fifteen Millimetre) long, 200 mm ( Two Hundred Millimetre) wide with minimum distances of 37 mm (Thirty Seven Millimetre) from wall face with concealed fittings arrangement of approved quality and colour, weighting not less than 88 gms (Eighty Eight gms) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
10
-
-
Providing and fixing PTMT soap dish holder having length of 138mm (One Hundred thirty Eight millimeter) breadth 102mm,(One Hundred two millimeter) height of 75mm (Seventy Five millimetre) with concealed fitting arrangements, weighting not less than 106 gms( One Hundred Six gms) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
15
-
-
Providing and fixing toilet paper holder of C.P. brass within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
8
-
-
Providing and fixing 15mm (Fifteen millimeter) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 : within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
46
-
-
Providing and fixing 15mm (Fifteen millimeter) dia C.P. brass stop cock concealed of standard design and of approved make conforming to IS:8931 within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
24
-
-
Providing and fixing 15mm (Fifteen millimeter) nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
20
-
-
Providing and fixing 45cm (forty five centemeter) length 15 mm (Fifteen millimetre) nominal bore uplasticised PVC connection pipe with brass unions within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
24
-
-
Providing and fixing 20mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) : within all leads and lift and carriage of material in all respect as per direction of Engineer-in-Charge.
12
-
-
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc.within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. INRENAL WORK- EXPOSED ON WALL-(I)1216(16 mm OD) Pipe.
282.2
-
-
1620 (20 mm OD) Pipe.
150
-
-
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge Concealed work, including cutting chases and making good the wall etc. within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. Concealed work, including cutting chases and making god the wall etc. (i)1216(16 mm OD) Pipe.
75
-
-
(ii) 1620 (20 mm OD) Pipe.
75
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 ( One two seven zero one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
5000
-
-
Providing and fixing high pressure UPVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. .within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150mm (One Hundred Fifty millimetre) dia
467.6
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
275.59
-
-
Providing and fixing PVC single equal branch with oval acces door, ISI Marked insertion rubber washer 3 mm ( three milimter) thick bolts and nuts complete including fixing with approved adhesive etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i)150.mm (One Hundred Fifty millimetre) dia
10
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
10
-
-
Providing and fixing PVC door bend with oval acces door insertion rubber washer 3 mm ( Three milimter) thick bolts and nuts ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150mm (One Hundred Fifty millimetre) dia
20
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
20
-
-
Providing and fixing PVC single equal branch plain ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150.mm (One Hundred Fifty millimetre) dia
10
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
10
-
-
Providing and fixing PVC collars ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150.mm (One Hundred Fifty millimetre) dia
36
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
40
-
-
Providing and fixing PVC Plain bend ISI Marked including fixing with approved adhesive etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150mm (One Hundred Fifty millimetre) dia
20
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
20
-
-
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rewal plugs etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150mm (One Hundred Fifty millimetre) dia
80
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
55
-
-
Providing and fixing PVC floor traps ISI markes of self cleaning design including fixing with approved , cost of cutting and making food the wall and floors atc. complete, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 110 mm X 90 mm (One Hundred Ten X Ninty millimetre) size
37
-
-
Providing and fixing PVC cowl including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150 mm (One Hundred Fifty millimetre) dia
4
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
7
-
-
Providing and fixing PVC double equal branch with oval acces door, insertion rubber washer 3 mm ( three milimeter) thick bolts and nuts ISI Marked including jointing with approved adhesive etc. complete, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150.mm (One Hundred Fifty millimetre) dia
6
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
6
-
-
Providing and fixing PVC Plain double equal branch ISI Marked including jointing with approved adhesive etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150mm (One Hundred Fifty millimetre) dia
8
-
-
(ii) 110 mm (One Hundred Ten millimetre) dia.
8
-
-
Providing and fixing PVC reducer ISI Marked including jointing with approved adhesive etc. complete, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (i) 150X 110 mm (One Hundred Fifty into One Hundred Ten millimetre) dia
6
-
-
(ii) 110 X 90 mm (One Hundred Ten X Ninety millimetre) dia.
6
-
-
Providing and fixing 110 mm (one hundred ten millimetre) dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete, within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
1
-
-
Providing and fixing PTMT Waste Coupling for wash basin and sink of approved quality and colour. Waste coupling 31 mm (Thirty One millimetre) dia of 79 mm (Seventy Nine millimetre) length and 62mm (Sixty two millimetre) breadth weighing not less than 45 gms( Forty Five Grams) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
37
-
-
Providing and fixing PTMT jet spray of approved quality and colour with one metre tube pipe with necessary fitting etc. complete within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
8
-
-
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square(Slit) 150 mm (one hundred Fifty millimetre) square with a height of 8 mm (Eight millimetre) andweighing not less than 100 gms ( One Hundred Grams) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
40
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm ( three Hundred into Three Hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm(One Hundred Fifty into One Hundred millimetre) size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Round Mouth Traps: 100mmx100mm size P or S type within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
10
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm (Twenty millimetre) nominal size finished with a floating coat of neat cement complete as per standard design within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (1) Inside size 800mm x 800mm and 500mm (Eight Hundred X Eight Hundred X five Hundred millimetre) deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm (Four Hundred Fifty Five X Six Hundred Ten millimetre) internal dimensions total weight of cover and frame to be not less than 38kg . (weight of cover 23 kg (Twenty three Kilogram) and weight of frane 15 kg.(Fifteen Kilogram)Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
6
-
-
Inside size 800 mm x 800 mm and 1000 mm( Eight Hundred into Eight Hundred into One Thousand millimetre) deep including Precast RCC cover with frame. (Light duty single seal pattern-1) 455mmx610mm ( Four Hundred Fifty Five into Six hundred ten millimeter) internal dimensions within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. (a) With 300mm (Three Hundred millimetre) thick walls of squarred rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (1 cement : 3 sand) within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
6
-
-
Providing and installing Mono Block Electric Pump 2 HP( Horse Power) single phase of Kirlosker make or equivalent including fixing complete.Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
1
-
-
Providing and fixing grab bars in handicaped toilet of CP 40 mm ( Forty milimter) dia steel pipes 78 cm ( Seven Eight) heigh welded with MS plate as per detail and position of WC seat and embedded in cement concrete complete. Within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. .
1
-
-
Providing and fixing stainless steel kitchen sink 510 x1040 mm bowl depth 250 mm ( two hundred fifty millimetre) with drain board A ISI 304 ( 18/8) Kitchen sink as per IS : 13983 with C.I. brackets, and stainless steel plug 40mm ( Forty millimetre) including painting of fittings and brackets,cutting and making good the wall wherever required within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge. .
5
-
-
Providing and fixing in position M D-10,500mm ( Five hundred millimetre) internal diameter precast R.C.C. manhole cover and frame circular shape within all leads and lift and carriage of material in all respect as per direction of Engineer-in-charge.
7
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements