Public Works Department Tender

Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.70-1.0 kg (zero point seven zero- one point zero kilogramme) per square meter as per MORD Technical specification section 502 as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, GST, Toll tax or any other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion RS-I, including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.25 to 0.30 kg (zero point two five to zero point three zero kilogramme) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 500, and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, GST, Toll tax or any other taxes imposed by the Government.

Providing, laying and rolling of open graded premix carpet of 20mm (Twenty millimeter) compacted thickness, composed of type-A 13.2mm to 5.6mm (Thirteen point two millimeter to five point six millimeter) aggregates at the rate of 0.27 cum (Zero point two seven cubic meter) mixed with bitumen binder Viscosity grade -Ten (VG-30(Thirty) bitumen, at the rate of 14.60 kgs (Fourteen point six zero kilogram) per 10 (Ten) square meter of road surface, to the required line, grade and level to serve as wearing coarse on a previously prepared base including mixing and heating binder and aggregate in hot mix plant of 30/40 (Thirty/forty) tonne per hour capacity transporting mixed materials with tipper and laying with paver finisher hydrostatic with sensor attachment and rolling with three wheeled 80-100 (eighty to hundred) kN static roller finished to required level and grades to be followed by seal coat of type-B complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge excluding the cost of tack coat and seal coat but including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkana, Octroi, Toll tax, GST or any other taxes imposed by the Government.