Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Eprocure
Opening Date26 Dec 2024
Closing Soon3 Jan 2025
Tender Amount₹ 36,82,799
Costs
EMD
₹ 73,700Document Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_96904_1Tender No
Electrical Division-I dated 04.12.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Group-C
16
1919
30704
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
378
456
172368
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
228
745
169860
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
507
326
165282
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
132
383
50556
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
220
606
133320
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
130
843
109590
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
3 x 1.5 sq. mm
132
111
14652
... More
3 x 2.5 sq. mm
191
168
32088
... More
Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.
-
-
-
... More
Armoured cable 10 sq. mm (four core)
50
379
18950
... More
Armoured cable 25 mm (3.5 core)
25
467
11675
... More
Armoured cable 50 mm (3.5 core)
25
841
21025
... More
Armoured cable 95 sq. mm (3.5 core)
60
1346
80760
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
34
406
13804
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
41
622
25502
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/ 6 amps switch.
7
75
525
... More
3 pin 5/6 A socket outlet
7
125
875
... More
Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of 75mm deep 12 module (200mmX150mm) on surface or in recess with suitable modular sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req. (For light plugs).Make:- havells, Anchor or any other approved by the Engineer in Charge .
13
906
11778
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
20
102
2040
... More
Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Havells, Wipro or any other approved by Engineer-in-Charge.
-
-
-
... More
LED Lamp .5 Watt ( Green)
1
39
39
... More
LED Lamp .5 Watt ( Red)
1
39
39
... More
LED lamp 9 Watt
18
129
2322
... More
S/E of LED Batten with polycarboante body and diffuser The fitting should be installed on existing surfaceThe job includes carriage, erection, making connections testing and commissioning of the fittings.
-
-
-
... More
Specification of LED fittings:-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Total lumens of the fittings. :-as below
-
-
-
... More
Diffuser :-Polycarbonate diffuser/PMMA
-
-
-
... More
Operating voltage :-140 V to 270 V, AC supply or better.
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-100 lm/w
-
-
-
... More
Color rendering index:-CRI shall be greater than 80
-
-
-
... More
Working/ operating temperature :-0ºC to + 45º C or better
-
-
-
... More
Color temperature :-6000ºK + 10%
-
-
-
... More
Electronic Driver :-
-
-
-
... More
Drive current (LED):-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :-2.5 KV minimum
-
-
-
... More
Efficiency Driver:-85%
-
-
-
... More
Protection:-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model :-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED :-25000 burning hours at 70% lumen maintenance
-
-
-
... More
LED Batten Light 10W (1000 Lm)
1
563
563
... More
S/E of LED Batten with aluminium extrusion housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.
-
-
-
... More
Specification of LED fittings:-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Total lumens of the fittings. :-as below
-
-
-
... More
Diffuser :-Polycarbonate diffuser/PMMA
-
-
-
... More
Operating voltage :-140 V to 270 V, AC supply or better.
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-110 lm/w
-
-
-
... More
Color rendering index:-CRI shall be greater than 80
-
-
-
... More
Working/ operating temperature :-0ºC to + 45º C or better
-
-
-
... More
Color temperature :-6000ºK + 10%
-
-
-
... More
Electronic Driver :-
-
-
-
... More
Drive current (LED):-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :-2.5 KV minimum
-
-
-
... More
Efficiency Driver:-85%
-
-
-
... More
Protection:-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED:-50000 burning hours at 70% lumen maintenance
-
-
-
... More
LED Batten Light 20W (2200 Lm)
97
883
85651
... More
S/E of LED Downlighter round type surface with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.
-
-
-
... More
Specification of LED fittings:-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Lumen output of the fitting:-as below
-
-
-
... More
Diffuser :-Polycarbonate diffuser/PMMA
-
-
-
... More
Operating voltage :- 140 V to 270 V, AC supply or better.
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-100 lm/w
-
-
-
... More
Color rendering index:-CRI shall be greater than 80
-
-
-
... More
Working/ operating temperature :-0ºC to + 45º C or better
-
-
-
... More
Color temperature :-6000ºK + 10%
-
-
-
... More
Electronic Driver
-
-
-
... More
Drive current (LED):-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :-2.5 KV minimum
-
-
-
... More
Efficiency Driver:-85%
-
-
-
... More
Protection:-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED:-50000 burning hours at 70% lumen maintenance
-
-
-
... More
Round LED Down Light 5/6 W Surface ( 500 Lm)
1
1470
1470
... More
Round LED Down Light 15 W Surface ( 1500 Lm)
41
1940
79540
... More
S/E of LED Downlighter surface square with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.
-
-
-
... More
Specification of LED fittings:-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Lumen output of the fitting :-as below
-
-
-
... More
Diffuser :-Polycarbonate diffuser/pmma
-
-
-
... More
Operating voltage :-140 V to 270 V, AC supply or better.
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-100 lm/w
-
-
-
... More
Color rendering index :-CRI shall be greater than 80
-
-
-
... More
Working/ operating temperature :-0ºC to + 45º C or better
-
-
-
... More
Color temperature :-6000ºK + 10%
-
-
-
... More
Electronic Driver :-
-
-
-
... More
Drive current (LED) :-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :-2.5 KV minimum
-
-
-
... More
Efficiency Driver :-85%
-
-
-
... More
Protection :-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model :-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED :-50000 burning hours at 70% lumen maintenance
-
-
-
... More
Square LED Down Light 24 W Surface ( 1500 Lm)
23
1940
44620
... More
S/E of UGR 19 LED Panel with PDC body and prismatic diffuser to be mounted in Recess. The job includes carriage, erection, making connections testing and commissioning of the fittings.
-
-
-
... More
Specification of LED fittings:-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Total lumens of the fittings. :-as below
-
-
-
... More
Diffuser :-Prismatic multilayer diffuser UGR 19
-
-
-
... More
Operating voltage :-140 V to 270 V, AC supply or better.
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-120 lm/w
-
-
-
... More
Color rendering index :-CRI shall be greater than 80
-
-
-
... More
Working/ operating temperature :-0ºC to + 45º C or better
-
-
-
... More
Color temperature :-6000ºK + 10%
-
-
-
... More
Electronic Driver :-
-
-
-
... More
Drive current (LED) :-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :- 2.5 KV minimum
-
-
-
... More
Efficiency Driver :-85%
-
-
-
... More
Protection :-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model :-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED :-50000 burning hours at 70% lumen maintenance
-
-
-
... More
Square LED Panel Light 36 W Recess Mounted ( 2 feet x 2 feet ) 4320 Lm
22
6755
148610
... More
S/E of LED Panel with PDC body and prismatic diffuser to be mounted in Surface. The job includes carriage, erection, making connections testing and commissioning of the fittings.
-
-
-
... More
Specification of LED fittings:-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Total lumens of the fittings. :-as below
-
-
-
... More
Diffuser :-Prismatic multilayer diffuser
-
-
-
... More
Operating voltage :-140 V to 270 V, AC supply or better.
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-120 lm/w
-
-
-
... More
Color rendering index :-CRI shall be greater than 80
-
-
-
... More
Working/ operating temperature :-0ºC to + 45º C or better
-
-
-
... More
Color temperature :-6000ºK + 10%
-
-
-
... More
Electronic Driver :-
-
-
-
... More
Drive current (LED) :-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :- 2.5 KV minimum
-
-
-
... More
Efficiency Driver :-85%
-
-
-
... More
Protection :-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model :-Bajaj/Havells/Crompton with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED :-50000 burning hours at 70% lumen maintenance
-
-
-
... More
Square LED Panel Light 36 W Surface Mounted ( 2 feet x 2 feet ) 4320 Lm
33
6033
199089
... More
S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.
-
-
-
... More
Specification of LED fittings:-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Total lumens of the fittings. :-as below
-
-
-
... More
Diffuser :-Polycarbonate diffuser/PMMA
-
-
-
... More
Operating voltage :-140 V to 270 V, AC supply or better.
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-80 lm/w
-
-
-
... More
Color rendering index:-CRI shall be greater than 80
-
-
-
... More
Working/ operating temperature :-0ºC to + 45º C or better
-
-
-
... More
Color temperature :-6000ºK + 10%
-
-
-
... More
Electronic Driver :-
-
-
-
... More
Drive current (LED):-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :-2 KV minimum
-
-
-
... More
Efficiency Driver:-85%
-
-
-
... More
Protection:-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model:-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED:-50000 burning hours at 70% lumen maintenance
-
-
-
... More
LED Bulk Head 10 Watt ( 800 Lm)
4
1157
4628
... More
Supplying and fixing LED flood light with high power LED's assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy120 lm/Watt. luminiare having color temp upto 6500ºK & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.90 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection and relevent LM 79/80 complaince from UN/NABL Lab connection wire, testing etc. to complete the job.Make Bajaj, Havells, panasonic or any other approved by the Engineer in Charge.
11
4740
52140
... More
Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
-
-
-
... More
Ceiling Fan 1200 mm sweep
19
3843
73017
... More
Ceiling Fan 1400 mm sweep
72
4029
290088
... More
Supplying and fixing Metal fan box as required complete in all respect as per statifaction of Er-in- charge etc .
91
253
23023
... More
Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type.
-
-
-
... More
Exhaust Fan, Light duty, (Domestic) 225/230 mm sweep
12
2216
26592
... More
Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Heavy Duty type.
-
-
-
... More
Exhaust Fan, Heavy duty, 300 mm sweep (900/1400rpm)
9
3600
32400
... More
P/F openable sheet metal shutter suitable for exhaust fan size 300 Inch as required complete in all respect.
21
485
10185
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
3
208
624
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
110
315
34650
... More
Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 A DP
6
1367
8202
... More
63 A DP
10
1549
15490
... More
40/63 A FP
1
3312
3312
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4 way , Double door
1
2121
2121
... More
6 way , Double door
5
2419
12095
... More
8 way , Double door
8
2650
21200
... More
12 way , Double door
5
3152
15760
... More
Supplying, Installation, Testing & Commissioning of Low Voltage Panel suitable for 415 V, 3 Phase, 4 wire 50 Hz AC supply system as per standard IEC 61439 Part 1 & 2.The LT Panel Enclosure Cubicles shall be design verified assemblies completely as per IEC61439-1&2 having IP42 enclosure protection having form 4B construction duly tested with IK10, shall be of aesthetic design, dust, damp & vermin proof, shall be modular, extendable and shall have maintenance friendly construction, shall have fully compartmentalized bolted construction, shall be metal clad sheet steel enclosed cubicle, floor mounting type suitable for indoor installations, shall have structural steel framework as per IEC 61439 part 1 & 2, shall have integral base frame with bottom cable entry having removable gland plates. The panel shall be made out of GI Sheet Steel & CRCA Sheet Steel. The CRCA Steel parts shall be powder coated with RAL7035 powder colour after proper 7 Tank Chemical Treatment. Gasketing shall be done properly to prevent any ingress of dust & vermin . The LT panel should have provision of following switchgear and accessories as mentioned below: -
-
-
-
... More
MCCB 200A 4Pole 36KA , With O/L S/C Protection -1 No.
-
-
-
... More
200A Copper Bus bar TPN of Electrolytic Grade E91 having Cross Section 1x20x10 MM per Phase ,1x20x10 MM for Neutral and Earthing Strip 1x20x6 MM
-
-
-
... More
Metering
-
-
-
... More
Digital VAF Meter-1 Set
-
-
-
... More
CT,s 800/5A-3 Nos.
-
-
-
... More
Phase Indication Set with Control MCB SP -1 Set
-
-
-
... More
OUTGOING SECTION-1( Light Ckt.)
-
-
-
... More
MCCB 100A 25 KA with TMA Protection release ( Ics=100% Icu)- 1 No.
-
-
-
... More
OUTGOING SECTION -II ( Heating )
-
-
-
... More
MCCB 160A 25 KA with TMA Protection release ( Ics=100% Ics)- 1Nos.
-
-
-
... More
Size Of Panel :-1100MM(W)X 1400MM(H)x350MM (D)
-
-
-
... More
400A main LT Panel
1
130493
130493
... More
Supplying and erection of distribution panel (confirming to (IEC code-61439 part 1&2) of dimensions 700mm(H)*500mm(W)*200mm(D) with plus 5cm variation,made from CRCA MS sheet enclosure. Panel will be fabricated with 16-SWG CRCA sheet steel fully dust & vermin proof,complete with locking arrangements to hose MCCB 63 amp (4 pole) 25 KA with TMA Protection release (Ics=100% Icu) as incommer and 63 Amp Copper busbar TPN of Electrolytic Grade E91 Having Cross Section 1x 25x6 MM for Phase and Neutral and 1x 25 x 3 MM for Earth Strip for outgoing Ckt. i/c RYB light indicator set and cable alley as required complete in all respects including the cost of switchgear . The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc. (i) 63A Sub Panel
1
21216
21216
... More
Supplying and erection of distribution panel (confirming to (IEC code-61439 part 1&2) of dimensions 750mm(H)*600mm(W)*200mm(D) with plus 5cm variation,made from CRCA MS sheet enclosure. Panel will be fabricated with 16-SWG CRCA sheet steel fully dust & vermin proof,complete with locking arrangements to hose MCCB 125 amp (4 pole) 25 KA with TMA Protection release (Ics=100% Icu) as incommer and 200 Amp Copper busbar TPN of Electrolytic Grade E91 Having Cross Section 1x 20x10 MM for Phase and Neutral and 1x 20 x 6MM for Earth Strip as outgoing suitable for Heating Ckt. i/c RYB light indicator set and cable alley as required complete in all respects including the cost of switchgear . The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc. (i) 125A Sub Panel
1
51329
51329
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
6649
39894
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
50
227
11350
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
60
51
3060
... More
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes with 8 bar pressure rating Five star BEE rating and safety valve installation by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:-
-
-
-
... More
50 Liter capacity water heater (Cat-A)
1
27208
27208
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
6
611
3666
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
30
162
4860
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
280
109
30520
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
40
88
3520
... More
DSR item No.14.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.. Make:-Astral Pipes, {recision pipes or any other approved by the Engineer in Charge.
-
-
-
... More
63 mm dia (OD-63 mm & ID-50 mm nominal)
300
66
19800
... More
120 mm dia (OD-102 mm & ID-120 mm nominal)
15
156
2340
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker with overcurrebt protection (RCBO), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.(i) RCBO 25A 30 MA
3
3816
11448
... More
Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
-
-
-
... More
Armoured cable 10 sq. mm (four core)
280
618
173040
... More
S/E of 7 Mtr. long Hot dipped Galvanized pole of octagonal cross-section continuously tapered made out from high tensile steel of minimum thickness 3mm complete with the base plate of minimum size 220mm x220mm x12mm alongwith inbuilt lockable junction box which should be operated with single key with connectors of Elmax / Connectwell / Essen / Wago make for the cable termination as per site requirement and one no. 6 Amps. Single pole MCB for each luminaire. The diameter across from the dimensions of the base and top should be minimum 130 mm and 70mm A/F (Across Face). The size of the poles and foundation bolts shall be suitable to withstand the maximum wind speed/ pressure as per IS-875. There should be no any circumferential welding on the pole. The method and material shall comply with as BSEN-10025 grade S355 or equivalent poles should be hot dipped galvanized in single dip to 65 microns min. confirming to IS 2629-1966. The material and specifications of flange plate/base plate shall be as per IS 2062. The street light poles shall be as per IS 2062. The street light poles shall be erected in the existing RCC foundation with 4 nos. special foundation bolts ‘J’ type minimum 700mm long galvanized M.S. rod of duly threaded of minimum 20mm dia in existing RCC foundation of suitable size as per the approved drawing. The material of steel foundation belts shall be confirming to grade EN-8 exposed threaded portion of foundation bolts shall be hot dipped galvanized. The octagonal pole should be of Bajaj / Transrail / Utkarsh / Valmont/ Salasarmake only. (The cost of 7Meter long S/L octagonal poles is including with 4 nos. x M20 x 600mm long ‘J’ type bolts with nuts, carriage of pole at site & installation complete as required.
-
-
-
... More
GI Octagonal Light Pole-7m Long
10
13889
138890
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soiwithin a lead of 50m.
-
-
-
... More
All kinds of soil (Size 0.7mx0.7mx1.65m = 0.81 cum (10 Nos. x 0.81cum= 8.1)
8.1
235
1903.5
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) (0.7m x 0.7m x 0.10m = 0.049 cum.)
(10 nos. x 0.049 = 0.49)
0.49
4686
2296.14
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars
1.Vertical Bar 12mm dia =4 nos.x1.55=6.2 r.mtr. @0.89 kg per mtr. =5.52 kg
2.Horizontal Ring 8mm dia =11 nos.x2=22 r.mtr.@0.390kg per mtr.=8.58kg Total (5.52+8.58=14.1+5% wastage=14.8 Kg. wastage = 10 nos. x14.81 = 148Kg.
148.1
65
9626.5
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Size 0.5x0.5x1.55 = 0.388 cum
Total (40 nos. x 0.388= 3.88 cum.)
3.88
7529
29212.52
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete Size 4 (0.5 x 1.55) = 3.1 sq. mtr. (0.5 x 1.55) x 4 = 3.1 Sq. Mtr. 10 x 3.1 = 31Sq. Mtr.
31
216
6696
... More
Supply, Fabrication and erection of GI pipe (medium class) bracket with suitable size of nipple for mounting the existing street light fitting with the following specifications.
-
-
-
... More
The bracket shall be made by Medium Class GI pipe of 2” dia with an angle of inclination of as 105 degree to vertical
-
-
-
... More
The 2” dia G.I. pipe shall be connected to a 4” dia G.I. pipe (45 cms) as required & canopy with top end closed with 14 G MS sheet to avoid entry of rain water in the pole.
-
-
-
... More
The 2” dia pipe shall be welded at a distance of 2” from the close end with 4” dia GI pipe
-
-
-
... More
The bracket shall be slipped over the top section of octagonal pole & fixed with 2 Nos. ½” dia GI nuts & bolts.
-
-
-
... More
A triangular 14 G MS sheet pieces of 2” shall be welded between two pipes.
-
-
-
... More
Single arm bracket made out of 2” dia. G.I. pipe 3’ overhang.
10
1758
17580
... More
S/E of LED Street Light IP 66 rated with aluminium body/PDC housing.The job includes carriage, erection, making connections testing and commissioning of the fittings.The Specification of the Fittings is as under :-
-
-
-
... More
Wattage of LED fittings :-As per following parameter.
-
-
-
... More
Total lumens of the LED fittings
-
-
-
... More
Body of fitting :-Pressure dia cast aluminium body with Extruded Aluminium heat sink
-
-
-
... More
Input frequency :-50 Hz + 1 Hz
-
-
-
... More
Operating voltage- 140 V to 270 V, AC supply or better.
-
-
-
... More
Power factor :-Minimum 0.90
-
-
-
... More
Luminaire efficacy :-110 lm/w
-
-
-
... More
Color rendering index:-CRI shall be greater than 70
-
-
-
... More
Working/ operating temperature :-00 to + 450c or better
-
-
-
... More
Color temperature :-60000K to 65000K
-
-
-
... More
Electronic Driver :-
-
-
-
... More
Drive current (LED) :-As per OEM.
-
-
-
... More
Operating voltage :-140 V to 270 V AC supply or better
-
-
-
... More
Type of driver :-Constant current output driver
-
-
-
... More
THD :-Less than 10%
-
-
-
... More
Surge Protection :-(10 KV minimum External) ( 4 KV Internal)
-
-
-
... More
Efficiency Driver:-85%
-
-
-
... More
Protection:-Shall have under voltage and over voltage protection.
-
-
-
... More
Guarantee of LED fittings including LED driver :-2 years against manufacturing defect.
-
-
-
... More
Fixture :-Should comply with LM 79 test from UL/NABL lab.
-
-
-
... More
LED Type/ Make/ Model:-Havells/Bajaj/Panasonic with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.
-
-
-
... More
Life of LED:-50000 burning hours at 70% lumen maintenance
-
-
-
... More
LED Street Light 45 Watt
10
5171
51710
... More
Conditions:-
-
-
-
... More
The work shall be carried out according to CPWD General Specifications.
-
-
-
... More
The work shall be completed to the entire satisfaction of the Engineer-in-charge.
-
-
-
... More
The firm will have to follow fair wage clause.
-
-
-
... More
Sub-standard work will not be accepted.
-
-
-
... More
No claim on account of fluctuation in prices due to any reason shall be considered.
-
-
-
... More
The quantity can be increased or decreased as per actual requirement at site.
-
-
-
... More
The conditional tenders shall not be accepted.
-
-
-
... More
No premium will be allowed on M.R. Items, abatement, if any shall be applicable on all items including market rates.
-
-
-
... More
The contractor has to employ qualified Engineer for the supervision of work at site.
-
-
-
... More
Any error or omission in nomenclature or unit can be corrected at any stage.
-
-
-
... More
The quality of material shall be strictly in accordance with the specification given in DNIT.
-
-
-
... More
All the material shall be inspected by the Engineer-in-charge of work before installation at site.
-
-
-
... More
The boards & M.S. boxes should be painted with 2 coats of superior quality paint after one coat of primer.
-
-
-
... More
Separate colour of wires shall be used for phase and neutral so as to distinguish it for live conductor.
-
-
-
... More
All the cable/ wire connections should be done through lugs / thimbles duly crimped with proper crimping tools & no extra payment shall be made on this account.
-
-
-
... More
The department has reserve the right to issue any amendment to the work order as emergency demands or allow of altogether cancel the contract without assigning any reason. The department reserves the right to delete / add any item.
-
-
-
... More
Discount offered by the firm should also be considered in deviation of items.
-
-
-
... More
The extra/substitute items will not be allowed against this work.
-
-
-
... More
Security shall be deducted on each running/ Final bill of the firm as per CPWD works manual.
-
-
-
... More
The firm shall ensure, the availability a licensed electrician/ supervisor/ qualified Engineer during the erection, testing and commissioning.
-
-
-
... More
The contractor will have to produce invoice/ gate pass of the manufacturer for major items of material to be installed against S/E of work for genuine of the material.
-
-
-
... More
The firm shall be quote the rates inclusive all the taxes/ GST whatever required and no extra payment shall be made in this respect.
-
-
-
... More
The fittings/ material should be got inspected by the concerned AE with the representative of the firm and necessary certificate should be signed by the representative of the firm for its genuineness.
-
-
-
... More
Any deviations to the clauses in the tender specifications must be clearly and separately indicated otherwise it shall be presumed that the offer is in line with requirements of tender.
-
-
-
... More
The work of S/E material except LED fittings/ fans shall be guaranteed for a period of one year against any manufacturing defect from date of handing over to the department. No extra payment shall be made on the account of labour charges, installation at site.
-
-
-
... More
The LED fittings/ LED drivers/ LED tube rods/ fans shall be guaranteed for a period of two years for free replacement from the date of completion of work / taking over the department.
-
-
-
... More
The firm will submit the test report for LM-79 & IEC standards for safety, performance and Efficacy of LED fittings from Govt./ NABL/ UL accredited lab.
-
-
-
... More
The firm will submit the LM-80 report from the chip manufacturer of LED fittings.
-
-
-
... More
One Number LED fitting of each type i.e. 2’x2’ LED Fitting surface Type,2’x2’ LED Fitting recess Type and 1’x1’ LED Fitting surface Type taken from lot of fitting and shall be got tested for Photometric Test, Electrical Parameters, THD, Surge Protection, IP Rating from the 3rd party NABL Govt. approved lab before installation at site. The cost in respect of testing LED fittings shall be borne by the Department. If the fitting fails the test, the firm has to install the other approved make of the fitting and the cost for the testing of other make fitting from the lab shall be borne by the firm if required.
-
-
-
... More
Approved Makes.
-
-
-
... More
Steel Conduit :-BEC,AKG,RKG, Precision Pipes
-
-
-
... More
PVC Conduit:-Anchor, AKG,RKG, Precision Pipes, Diplast.
-
-
-
... More
FRLS Wires:-Havells, Finolex, RR Kable, KEI, Grandley.
-
-
-
... More
Switches/sockets(Premium).:- Havells, (REO) (Athena), Goldmedal(Air)(GIFa).Anchor(Pental)Legrand (arteor), L&t (Entice)
-
-
-
... More
Switches/sockets (Premium):- Havells, (Athena), Goldmedal, (GIFa).Anchor,Legrand (arteor), L&t (Entice)
-
-
-
... More
MCB’s and Distribution board:- Havells, ABB, Legrand, L&T, Schneider, C&S ( Distribution board and MCB has to be of same company).
-
-
-
... More
MCCB’s and switchgear:- Havells, ABB, Legrand, L&T, Schneider, C&S
-
-
-
... More
Bus bars Copper:- Havells, Anchor
-
-
-
... More
Geyser:- Havells, racold, bajaj,Goldmedal, jaguar ( 5 star rated).
-
-
-
... More
Cat 6:- Havells, Dlink, Legrand, KEI.
-
-
-
... More
Ceiling fan, BLDC:- Atomberg (Efficio), Havells (Efficia Neo), Orient (hector 500), Gold Medal (Maruti), Bajaj (efficial) ( 5 star rated)
-
-
-
... More
Ventilating fans BLDC Plastic body:- Atomberg, Havells orient, Gold Medal, Bajaj ( 5 star rated)
-
-
-
... More
Exhaust fans:- Atomberg, Havells orient, Gold Medal, Bajaj
-
-
-
... More
LED lights polycarbonate body:- Bajaj, havells, Goldmedal,Panasonic, Philips, Wipro, Chengi ( If quantity of LED fittings exceeds 50 in number then testing of fittings is mandatory )
-
-
-
... More
LED lights PDC/CRCA body:- Bajaj, Havells, Panasonic, Philips, Wipro, LT, Chengi. ( If quantity of LED fittings exceeds 50 in number then testing of fittings is mandatory )
-
-
-
... More
LED Lights UGR19:- Bajaj, Havells, Philips, Wipro, LT, Chengi.
-
-
-
... More
Armoured Cables:- Univesal Cables, KEI Havells, Grandley
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%