Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date16 Jan 2024
Closing Date27 Jan 2024
Tender Amount₹ 2,57,66,942
Costs
EMD
₹ 5,15,400Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
C/o Divisional Office Building Of Hppwd Kotkhai, Distt. Shimla, H.p.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_84078_1Bid Award Id
ViewTender No
PW-KD-E-TENDER/2023-24-6709-13 DATED 9-1-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavation in drain and channel in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing off to dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
32.4
13338
411.69
... More
Filling in plinth with sand under floors including watering ramming consolidating and dressing complete including carriage of material through all modes of transportations with in all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.
15.58
59924
3846.27
... More
Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling to any floor height and removal of the same for in situ-reinforced concrete and plain concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
-
-
-
... More
In foundation, footings, bases of columns etc. and mass concrete.
76.1
25906
340.43
... More
In flat surfaces such as soffits of suspended floors, roofs, landings and the like of any thickness in all floor level in all heights.
418.72
289913
692.38
... More
Columns,pillars,posts and struts Square,rectangular or polygonal in plan in all floor level in all heights.
262.68
155997
593.87
... More
Stair cases with sloping or stepped soffits excluding landing in all floor level in all heights.
57.99
31247
538.85
... More
Beams, Cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in all floor level in all heights.
370.24
232855
628.93
... More
Edges of slabs and break in floors and walls in any depth / width.
217.17
28245
130.06
... More
In vertical surface such as wall (any thickness) partition and the like including attached pilasters in all floor level in all heights.
70.73
31911
451.18
... More
Providing and laying cement conrete 1: 6:12 (One cement : Six sand: twelve crushed stone aggregate 40mm (Forty milimetre) nominal size) mechnically mixed and curing complete excluding the cost of form work in foundation and plinth including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD.specifications of 1990 volume-I and as per direction of Engineer-in-charge.
26.68
151683
5685.3
... More
Providing and laying cement concrete 1:4:8 (One cement: Four sand :Eight graded cursed/broken stone aggregate 40mm (forty millimeters) nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
20.88
131393
6292.81
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing comlpete excluding cost of form work and reinforcement forreinforced in Suspended floors and the like including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge
6.25
46044
7367.14
... More
Providing and laying cement concrete 1:1.5:3 (one cement isto one point five sand isto three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work and reinforcement for reinforced concrete work and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
-
-
-
... More
In Foundation, footings bases of columns etc. and mass concrete.
64.64
627059
9700.8
... More
In suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor all level.
126.47
1319107
10430.2
... More
In columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in all floor level in all heights.
28.24
310279
10987.24
... More
In stair cases with sloping or stepped soffits excluding landings in all floor level in all heights.
5.88
62930
10702.54
... More
In walls (any thickness but not less than 0.10m) attached pilasters, buttresses, plinth and string courses etc from top of foundation in all floor level in all heights.
7.96
88221
11083.13
... More
providing in RCC work smoot 1:1½.:3 (1 cement : 1½. sand : 3 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete to give smooth and even surface including centering and shuttering etc but excluding cost of reinforced work in:-
-
-
-
... More
Mouldings as in cornics window sills etc. not exceeding 15cm girth.
2.93
51675
17636.78
... More
String courses, copings, bed plates, anchor blocks, plain windows sills and the like :
1.5
23827
15884.75
... More
Providing Tor / TMT steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position complete in all floor levels in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
42474
5056954
119.06
... More
Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogamme) Of cement per square metre of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HP. PWD specifications excluding cost of centring and shuttering including carriage in all leads,lifts and as per the direction of Engineer in charge.
270.1
7900
29.25
... More
Providing in RCC work smooth finishing of exposed surfaces with cement morter 1:3 (1 cement : 3 sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge:-
547.97
102360
186.8
... More
Providing and laying cement concrete 1:8:16 (One cement : eight sand : sixteen crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mixed and vibrated, curing complete excluding cost of form work screed laid under floor as per HP. PWD. specifications of 1990 volume-I. including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.
7.71
40816
5294.01
... More
Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (One cement : Six sand) Second Class Bricks including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
33.16
331438
9995.14
... More
Providing and laying brick work using common burnt clay building brick in Cement Mortar 1:6 (One cement:Second sand) Second class bricks in super structure for all floors and heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.
68.53
704741
10283.69
... More
Providing and laying second classs half brick masonry in common burnt clay building bricks in foundation and plinth level in Cement Mortar 1:4 (One cement: Four sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
76.31
93723
1228.2
... More
Providing and laying second class half brick masonry in common burnt clay building bricks in cement Mortar 1:4 (One cement: Four sand) in super structure for all floor in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
316.17
409791
1296.11
... More
Random rubble masonary/ polygon ruble mesonary (uncoursed brought to courses) with hard stone of approved quality in foundation and plinthl in cement morter 1:6 ( 1 cement : 6 sand)
6.5
44063
6778.97
... More
Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. complete including carriage of material in all leads and lifts
27.96
60068
2148.38
... More
Providing and laying square rubble masonary coursed with hard stone of approved quality in foundation and plinth and including racking out joints in cement mortar 1 : 4 ( one cement : four sand) complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per HP.PWD. specifications of 1990 volume-I,as per direction of Engineer-in- Charge.
45.41
434037
9558.19
... More
40 mm thick cement concrete flooring 1:2:4 (1 cement :2 sand :4 grade stone aggregate 20mm nominal size ) laid in one layer finished with a floating coat of neat cement
24.03
12061
501.93
... More
Providing and fixing 35mm thick flush door shutters phenol bonded IS:2202 interior grage including black enamelled M.S. butt hinges core of black board construction with frame of first class hard wood and well matched firtst class Indian teak ply veneering with vertical grains of cross band and face vaneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
68.1
185057
2717.44
... More
Providing and fixing 40 mm thick panelled and glazed shutter for(Main Door) doors, windows & clerestorey windows made of second class deodar wood styles , side and top rails 100 x 40 mm, middle rail 150 x 40 mm and bottom rail 200 x 40 mm, first class deodar wood panel 12 mm thick below middle/ lock rail and 6 mm thick glass pan with rubber gasketabove lock rail including black enameled iron butt hinges with necessary screws complet as per Architecural drawing.
3.07
15894
5177.38
... More
Providing and fixing 40 mm thick wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G with wire of dia 0.56mm made of second class devodar wood doors, windows and clerestory windows including first class deodar wood including bright finished black enamelled iron butt hinges with necessary screws including all leads and lifts :-
7.37
26208
3556.07
... More
Providing and fixing 19mm (nineteen milimetre) thick commercial board water proof shutter for cup boards including fixing with nickle plated piano hinges with screws etc., complete including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
12.21
21242
1739.79
... More
Providing and fixing 19mm (Nineteen milimetre) thick water proof commercial board (ISI marked) in shelves/boxes for cup boards including fixing with nickel plated piano hinges with screws etc. complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge
32.68
47468
1452.51
... More
Providing and fixing 1.00mm (one milimetre) thick coloured or plain lamination sheet (ISI mark) (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
12.21
12445
1019.29
... More
Providing and fixing ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately including all leads, lifts and carriage of material :- 6mm thick
12.21
8755
717.07
... More
Providing and fixing square edged cover fillets(beading) 19mm x 6mm section, with wood screws in ceiling and lining including mitring at junctions (a) Ist class deodar wood. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.
61.05
4926
80.69
... More
Providing and fixing M.S sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws and nuts etc. complete including carriage of materials through all modes of transportations with in all leads and lifts and as per HPPWD specification 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge
-
-
-
... More
300×16mm (Three hundred into sixteen millimeter)
4
3033
758.33
... More
250×16mm (Two hundred fifty into sixteen millimeter)
27
16444
609.06
... More
Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:-
-
-
-
... More
250 X 10 mm
22
2339
106.33
... More
200 X 10 mm
54
5741
106.33
... More
150 X 10 mm
12
762
63.57
... More
Providing and fixing aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete.
-
-
-
... More
125 mm
28
2514
89.81
... More
100 mm
54
4849
89.81
... More
75 mm
32
2422
75.69
... More
Providing & fixing hydraulic door closer EVERST make or equivalent of approved quality & manufacture including carriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.
4
7200
1800
... More
Providing & fixing 100 mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of materials within all leads,lifts & other incidential complete as per entire satisfaction of the Engineer-in-Charge.
15
3690
246
... More
Providing & fixing bright finished magnetic/catcher (M-15) with screws complete including carriage of materials in all leads and lifts :-
22
2149
97.69
... More
Providing and fixing 65mm X 35mm special quality bright finished brass cup board lock with six levers including necessary screws etc. complete including carriage of materials in all leads and lifts.
3
1215
405.12
... More
Providing & fixing 150 mm bright finished brass hasps and stapples (safety type)with necessary screws including carriage of materials in all leads and lifts
27
4789
177.38
... More
Providing & fixing 150 mm M.S. single acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all leads and lifts :-.
6
1660
276.72
... More
Providing & fixing 150 mm M.S. double acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all leads and lifts.
2
1071
535.98
... More
Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws.
Plain grill including carriage of materials in all leads and lifts.
1861.87
235619
126.55
... More
Providing and fixing all weather proof ACP imported Sign Panel all weather proof multi colour computerised reflective digitat panel 3mm thick, mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. including carriage of material in all leads and lifts complete .
54.88
88236
1607.8
... More
Providing and fixing PGI sheet lining with butt jointing and nails with necessary scwews complete as per Architectural drawing including carriage of materials in all leads and lifts.
15.52
12416
800
... More
Providing and fixing 12 mm thick and 100 mm wide palmet with 25 mm diametre wooden/ C.P curtain rod and brackets including fixing with 25 X 3 mm MS flat 10 cm long & plugs etc. Complete: First class deodar wood including carriage of materials in all leads and lifts.
78
43060
552.06
... More
Providing and laying mirror polished Kota stone slab of uniform colour of size 55x55cm in flooring over 20mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete :-25 mm thick mirror polished slab size not less than 550mmx550mm including carriage of materials within all leads and lifts.
475.84
1297696
2727.17
... More
Providing and laying non-slippery spartic ceramic tiles (30 x 30cm/ 40x40 cm) and 8 mm thick of NITCO / ORIENT or equivalent in flooring treads etc. in cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto floor all level including carriage of material within all leads and lifts as per direction of Engineer-in-charge.
58.97
45380
769.55
... More
Providing and laying 40 mm thick Red Mandana stone slab ( band of required width) (Table rubbed and polished) in flooring over 20mm thick base of cement mortar 1:4(1cement:4 sand) including jointing with grey cement slurry mixed with pigment to match the shade of the stone i/c rubbing and polishing complete including carriage of materials in all leads and lifts.
3
8211
2737.12
... More
Providing and laying 25 mm (Twenty five milimetre) thick mirror polished Kota stone slab flooring with 30mm (thirty milimetre ) (average) thick cement mortar 1:4 (one cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
24.8
77784
3136.49
... More
Providing and laying 25mm (twenty five milimetre ) thick Mirror polished Kota stone slab in risers of steps ,skirting dado and pillars laid on 12 mm (average) thick cement morter 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
76.28
224442
2942.35
... More
Providing and laying marble work (table rubbed and polished) in flooring/skirting/wall lining 20mm. thick base in cement mortar 1:3(1cement:3sand) including jointing with cement mortar 1:2(1 white cement:2 marble dust)with an admixure of pigment to match the shade of the marble. 20 mm.thick Baroda green marble including carriage of materials in all leads and lifts.
2.72
15445
5678.39
... More
Providing and fixing 20 mm thick white makrana marble work (Table rubbed and polished for wall lining) VENEER work with cement mortar 1:3(1cement:3sand) including pointing with white cement mortar 1:2(1 white cement:2 marble dust) with an admixure of pigment to match the shade of the marble including carriage of materials in all leads and lifts
27
158872
5884.17
... More
Providing and laying duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing, rubbing & polishing complete (Sub base concrete floor to be paid for complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
-
-
-
... More
40 mm thick inter locking block
61.2
133729
2185.12
... More
60 mm thick inter locking block
437.1
962778
2202.65
... More
Providing & fixing coloured/white glazed tiles 300 mm X 450 mm X 8mm thick in skirting risers of steps and dado on 12mm thick cement mortar 1:3 (1cement : 3sand) and jointing with neat cement slurry complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
162.68
322682
1983.54
... More
Making moulded nosing in terrazzo tiles/marble/kota stone including returned moulded ends and angles to mouldings complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
99.34
14524
146.21
... More
Providing and fixing Garsa slate stone / unistone 12mm. cladding on walls / R.C.C. surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of materials in all leads and lifts .
164.55
366155
2225.19
... More
Providing and fixing 0.60mm ( Zero point six zero milimeter ) thick prepainted steel sheet of TATA DURASHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
317.42
375650
1183.45
... More
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
58.7
43467
740.5
... More
Providing and fixing valley 90 cm overall 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
19.2
15720
818.8
... More
Providing and fixing flushing 38cm overall with 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
65
57019
877.22
... More
Providing and fixing thiclk 30cm wide 30cm deep 120cm overall box type 0.45mm thick plain prepainted steel sheet of TATA Durashine gutter with bolts and nuts and washers etc. including making conection with rain water pipe complete as per design including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
84.8
63429
747.99
... More
Providing and fixing on wall face150mm ( One hundred fifty milimeter ) dia PVC rain water pipes of working pressure not less than 4.5 Kg ( Four decimal five kilogram ) per square meter including filling the joints with approved adhesive complete as per HP.PWD.,specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts and other incidental charges complete as per entire satisfaction of the Engineer-in Charge.
86.4
36104
417.88
... More
Providing and fixing M.S. sheet holder bat clamps of approved design to 150mm dia M.S pipes embeded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. complete as per HP.PWD., specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
76
17429
229.33
... More
Providing and fixing on wall face PVC accessories for rain water pipe including filling the joints with approved adhesive complete 150mm (One hundred fifty milimetre) nominal size including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
-
-
-
... More
PVC. Plain bend 150mm(One hundred fifty milimetre) dia.
20
7800
390.02
... More
PVC Door Bend 150mm(One hundred fifty milimetre) dia.
10
4310
431.08
... More
PVC Plain shoe 150mm (One hundred fifty milimetre) dia.
10
3900
390.02
... More
PVC collars 150mm (One hundred fifty milimetre) dia.
20
5063
253.17
... More
Providing & fixing M.S. B.P. sheet 2mm ( Two milimetre ) thick in eaves board/facia/ soffits/ ceiling including cutting fixing & welding to steel roof mambers and applying a coat of red lead primer complete ( Base member of steel work shall be measured & paid for separately ) as per HP.PWD., specification Volume-I ( one ) including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
149.31
307668
2060.6
... More
Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7 sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposit direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1 : 4 ( 1 cement : 4 sand) admioxed with 200 ml of pidiproof LW @ 200ml per 50 kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete. through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
49.72
24860
500
... More
Providing and fixing single rebate door frame manufactued from ISLC 75 mm (with MS Flat 75X4 mm for cenrte frame) & MS hollow section for rebate 40X12 mm and 1.5 mm thick welded together for making rebate i/c MS Flat Holdfast 20 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
-
-
-
... More
Side/end frame
202.85
175061
863.01
... More
Center/ mullion frame
109.22
109523
1002.78
... More
Providing steel work of TATA SALT or RASHTRIYA ISPAT welded in built up sections/hollow section in trusses and framed work, including cutting,hoisting , fixing in position and applying a priming coat of red lead paint complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
-
-
-
... More
In trusses and trussed purlings in buildings
120.62
1358076
11259.13
... More
In gratings, framed, guards, bars ladders and railing, brackets and similar works.
63.51
832387
13106.4
... More
Providing & fixing moulded hand rail of mild steel hollow pipe 50 mm ( fifty milimetre ) dia welded in stright length over mild steel flat at top of vertical balusters including one coat of red oxide priming coat complete ( mild steel flat & baluster of railing shall be measured & paid for sepataely ) as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
50.18
22151
441.45
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mmX6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements,stoppers,handles, including applying a priming coat of red lead paint as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
17.67
102166
5781.94
... More
Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including carriage of materials in all leads and lifts.
153.13
70298
459.08
... More
Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as directed by Engineer-in- Charge including carriage of materials in all leads and lifts.
-
-
-
... More
Steel windows
46
167729
3646.29
... More
Side hung windows
28.75
87116
3030.13
... More
Side hung wire gauge windows
28.75
85592
2977.12
... More
top hung ventilators
14.33
43187
3013.79
... More
Providing and fixing M.S.round holding down or anchor bolts with nuts and washer plates complete including carriage through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
2
25350
12675.37
... More
Providing and fixing steel railing in ramp for hanicaped made of M.S. 50 mm dia steel pipe slip resistant with round ends at 75 cm and 90 cm height and suported with 25 mm dia steel pipe dully welded in all corners and fixing in position complete as per architectural drawing.
7.2
3178
441.45
... More
Providing and fixing M.S round/ rectangular/square hollow pipe of approved size and section in vertical posts welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete including carriage of materials within all leads and lifts.
3
24960
8320
... More
Applying priming coat over new concrete /masonary/asbesto/cement /plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter, sand papering and knotting. ready mixed priming paint brushing red lead red oxide/ zinc oxide chrome for all floor including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
142.54
7958
55.83
... More
Painting two coats ( excluding priming coat ) on new steel & other metal surface with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust & other foreign matters with other then white as per HPPWD specification 1990 Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
528.48
54163
102.49
... More
Applying priming coat over new wood & wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt & other foreign matter, sand papering & knotting ready mixed paint brushing primer pink as per HPPWD specification Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
335.54
20696
61.68
... More
Painting two coats ( excluding priming coat ) on new wood & wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust & other foreign matter sand papering & stopping with enamel paint other than white as per HPPWD specification 1990 Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
335.54
36026
107.37
... More
Painting two coast (Excluding primer coat) on concrete / masonry / asbestos cement/plastered surfaces with satin enamel of approved shade/brand and manufature to give and even shade including cleaning the surface of dirt, dust & other foreign matter sand papering & stopping with enamel paint other than white as per HPPWD specification 1990 Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
142.54
17465
122.53
... More
6mm ( six milimetre ) cement plaster to ceiling with cement mortar 1:3 ( One cement : three approved sand )as per HP.PWD., specification 1990 Volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
443.73
80834
182.17
... More
15mm ( fifteen milimetre ) cement plaster in single coat on rough side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in cement mortar 1:6 ( One cement : six approved sand) as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
784.4
229562
292.66
... More
15mm ( fifteen milimetre ) cement plaster in single coat on fair side of brick/ concrete/stone walls of interior plastering upto floor two level including arrises,internal rounded angles, chamfers & rounded angles not exceeding 80mm in ( eighty milimetre ) grith finished even and smooth in as per HP.PWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
cement mortar 1:6 ( One cement : six approved sand)
764.12
223902
293.02
... More
cement mortar 1:4 ( One cement : four approved sand)
110.39
34554
313.02
... More
Extra for Plastering in single coat done on mouldings, cornices or archtraves including neat finish to line and level.Cement mortar 1:3 (1 cement : 3 sand) including carriage of material through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
30
3003
100.1
... More
15mm thick plain cement mortar Raised bands in cement mortar 1:4(1 Cement:4 Sand) upto 300 mm in width including carriage through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
10.62
1858
175
... More
Distempering two coats with Ist quality oil bound washable distemper of Asian paints or equivalent of approved shade and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer for all floors including carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
377
51976
137.87
... More
Distempering two coats with Ist quality oil bound washable distemper of Asian paints or equivalent of approved shade and manufacture and of required shade on undecorated ceiling/ slopping surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer for all floors including carriage of materials through all modes of transportation with in all leads and lifts as per PWD specifications and as per direction of Engineer-in-Charge.
443.73
31504
71
... More
Finishing wall with weather proof exterior grade emulsion of approved shade and design (Apexultima) or its equarlied on undecorated wall surfaces two coats to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
260.98
25497
97.7
... More
Wall painting (two coats) with arcylic /premium emulsion paint of approved brand and manufacture for interior grade on undecorated on crete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge
737.13
98893
134.16
... More
Applying one coat of acrylic primer ( Spectrum or equivalent of superior quality) on new concrete/ masonary/plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters , sand papering the surface smooth complete including carriage of material through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
764.11
40681
53.24
... More
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.including carriage of material through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
1081.71
129307
119.54
... More
Providing & laying in trenches, galvanised mild steel tubes ( Medium grade ) , tube fitting ( earth work in trenches to be measured & paid for separately ) )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
20 mm ( Twenty milimetre ) nominal bore
150
28275
188.5
... More
32 mm ( Thirty two milimetre ) nominal bore
100
46834
468.34
... More
Providing and fixng to wall ceiling floor galvanised mild steel tubes (Medium grade), tube fittings and clamps (Medium grade) tube fitting and clamps including making good the wall ceiling and floor .through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
15 mm nominal bore :-
50
17415
348.3
... More
20 mm nominal bore :-
50
22939
458.79
... More
32 mm nominal bore :-
50
27664
553.29
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm ( Twenty milimeter to forty milimeter ) nominal bore by providing & fixing tee including cutting & threading the pipes complete as per HP.PWD., Specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
1
706
706.4
... More
Fixing water metre stop cock in galvanised mild steel tube including necessary fitting such as mild steel galvanised jam nuts,sockets, etc. cutting & making long screws, complete ( Water metre & stop cock to be measured & paid for separately) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
20 mm ( Fifteen milimetre ) nominal bore
1
529
529.49
... More
Providing and fixing 2000 litres net capacity PVC water storage tank of ISI : 12701 marked,G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.
5000
45750
9.15
... More
Construction of chamber 300mm x 300mm x 500mm ( Three hundred milimetreinto three hundred milimetre into five hundred milimetre ) inside size for stop cock with C.I. surface box 100mm x 100mm x 75mm ( one hundred milimetre into one hundred milimetre into seventy five milimetre )( inside ) with hinged cover fixed in cement concrete slab 1:2:4 ( one cement : two approved sand:four graded crushed stone aggregate 20mm nominal size ) 75mm thick foundation concrete 1:5:10 (one cement:five approved sand:ten graded crushed stone aggregate 40mm ( forty milimetre ) nominal size ) & inside plastering with cement mortar 1:3 ( One cement:three approved sand)finished with a floating coat of neat cement including curing complete, with 100mm ( one hundred milimeter )thick walls of brick masonry in cement mortar 1:5 ( One cement : five approved sand ) as per HPPWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
5
24490
4898
... More
Providing & fixing plytheline- Aluminium Polyethylene ( PE-AL-PE ) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamps at one metre spacing, cutting, fixing & making good the wall etc. but excluding the cost of fitting ( Internal work ) pipes exposed on wall internal work-Exposed as per HPPWD., specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
1216 ( One thousand two hundred sixteen ) ( 16 mm ( Sixteen milimeter ) outer dia pipe )
109
40008
367.05
... More
1620 ( One thousand six hundred twenty ) ( 20 mm ( twenty milimeter ) outer dia pipe )
105
38540
367.05
... More
Providing & fixing PE-AL-PE- composite internal seal compression fitting as per IS-15450-2004 for hot water supply such as tees, elbows, reducers, connector, couplers & clamps with jointing testing & fixing including cutting & making good the walls etc. ( This type of fitting to be used for hot water supply only ) as per HPPWD.,specification volume-I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
Equal Tees :-1216 mm ( One thousand two hundred sixteen milimeter ) size
20
6858
342.9
... More
1620 mm ( One thousand six hundred twenty milimeter ) size
20
6031
301.58
... More
Reducing Tees:- 1620 ( One thousand six hundred twenty into all branches
15
4523
301.58
... More
2025 x 2025(Two thousand twenty five)
15
4730
315.36
... More
Female branch Tees :-1216 x 1216 x 15mm ( One thousand two hundred sixteen into One thousand six hundred sixteen into fifteen milimeter ) thread
25
8228
329.13
... More
1620 x 1620 x 20 mm ( One thousand six hundred twenty into One thousand six hundred twenty into twenty milimeter ) thread
25
8228
329.13
... More
Female Elbows :-1216 x 15mm ( One thousand two hundred sixteen into fifteen milimeter ) thread
30
11113
370.45
... More
1620 x 15mm ( One thousand six hundred twenty into fifteen milimeter ) thread
30
11113
370.45
... More
Male thread connector :-1216 x 15mm ( One thousand two hundred sixteen into fifteen milimeter ) thread
25
6674
266.98
... More
1620 x 15mm ( One thousand six hundred twenty into fifteen milimeter ) thread a
30
9041
301.39
... More
Female thread connector :-1216 x 15mm ( One thousand two hundred sixteen into fifteen milimeter ) thread
25
5814
232.56
... More
1620 x 15mm ( One thousand six hundred twenty into fifteen milimeter ) thread
30
9008
300.29
... More
Couplers :-1216 ( One thousand two hundred sixteen ) ( 16 mm ( Sixteen milimeter ) outer dia pipe )
15
4107
273.86
... More
1620 ( One thousand six hundred twenty ) ( 20 mm ( twenty milimeter ) outer dia pipe )
15
4107
273.86
... More
Reducers :- 1620 x 1216 ( One thousand six hundred twenty into one thousand two hundred sixteen milimeter ) outer dia pipe )
10
3013
301.39
... More
2025 x 1216 ( Twoe thousand twenty five into one thousand two hundred sixteen milimeter ) outer dia pipe )
10
3153
315.36
... More
Providing and fixing high pressure PVC spigot & socket, waste & ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150mm (One hundred fifty milimetre ) dia
115
82881
720.71
... More
110mm (One hundred ten milimetre ) dia
120
63186
526.55
... More
Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.
-
-
-
... More
150 mm dia
10
6038
603.87
... More
110 mm dia
13
6703
515.66
... More
Providing & fixing PVC door bend with oval access door insertion rubber washers 3mm ( three milimeter ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150mm (One hundred fifty milimetre ) dia
10
4098
409.81
... More
110mm (One hundred ten milimetre ) dia
10
3460
346.04
... More
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150 mm dia
6
2809
468.17
... More
110 mm dia
6
2076
346.04
... More
Providing & fixing PVC collars ISI marked including fixing with approved adhesive etc. complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150mm (One hundred milimetre ) dia
15
4478
298.54
... More
100mm (One hundred milimetre ) dia
15
3867
257.83
... More
Providing & fixing PVC Plain bend ISI marked including fixing with approved adhesive etc. complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150mm (One hundred milimetre ) dia
15
3363
224.26
... More
110mm (One hundred ten milimetre ) dia
14
3229
230.69
... More
Providing and fixing PVC offset 45 Govt. Degree ISI marked including fixing with approved adhesive etc. complete.as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150 mm dia
8
3311
413.89
... More
110 mm dia
10
3324
332.47
... More
Providing & fixing PVC double equal branch with oval access door insertion rubber washers 3mm ( three milimeter ) thick bolts & nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150mm (One hundred fifty milimetre ) dia
4
1818
454.6
... More
110mm (One hundred ten milimetre ) dia as
4
1492
373.18
... More
Providing and fixing PVC double equal branch Plain ISI marked complete including fixing with approved adhesive etc. complete.s per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
150 mm dia
3
1323
441.03
... More
110 mm dia
3
1078
359.61
... More
Providing and fixing PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. 110 mm x 110 mm
26
9062
348.56
... More
Providing & fixing PVC reducer ISI marked including jointing with approved ahesive etc. complete as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. 150mm x 110mm (One hundred fifty milimetre into one hundred ten milimeter ) dia
6
2809
468.17
... More
Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.as per HP.PWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads, lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge
-
-
-
... More
150 mm dia
5
2001
400.32
... More
110 mm dia
10
3596
359.61
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
-
-
-
... More
150 mm dia
60
6513
108.56
... More
110 mm dia
60
4885
81.42
... More
Chse in stone/ brick masonry walls for fixing sand cast iron/ cast/spun/ PVC pipes and fitting including making good the same with stone/ brick work in cement morter 1:3 (one cement:3 sand) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
-
-
-
... More
150 mm dia
30
5877
195.9
... More
110 mm dia
30
3918
130.6
... More
Providing and fixing PVC cowl complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.
-
-
-
... More
150 mm dia.
2
597
298.54
... More
110 mm dia.
3
773
257.83
... More
Providing and fixing viterous China water closet squatting pan (Indian Type W.C. pan) size 580mm (Earth work, bed concrete, foot rest and traps to be measured and paid for separately including . complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. Orrissa pattern long pattern as per CERA catlogue No. 2071.:-
5
8819
1763.8
... More
Providing & fixing Vitreous China wash down water closet ( with intergal " P " or " S " trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( One cement : one sand ) ( Seat & cover to be measured & paid for separately ) Angle Indian Universal closet of white shade of Hindware or its equilevent W.C. Pan as per HP.PWD., specification Volume -I ( one )including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of Engineer-in-Charge.
-
-
-
... More
Anglo Indian Universal closet
3
10183
3394.35
... More
European type W.C. pan ) no 20049 EWC in whitew shade
2
6788
3394.35
... More
Providing and fixing PVC low level flushing cistern. 10.00 liters capacity (full flush) European standard control with a pair of C.I. brackets ,With fittings such as lead valve syphon, 15mm nomilal size PVC ball valve with polythene flot ,with push botten, coupling for connection with complete with inlet, outlet and overflow pipes ,40 mm dia C.P. flush bend etc. complete.No. 2603 of CERA/ HINDWARE including carriage of materials through all modes of transportationswith in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
10
32082
3208.27
... More
Providing & fixing plastic seat ( solid/Hollow type ) & cover for wash down water closet with C.P. brass hinges & rubber buffers Solid Type white plastic seat & cover as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
5
5665
1133.1
... More
Providing and fixing viterous China wash basin of Cera Cat No. 1025 or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting .as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. Flat Back 550 x 400 mm
13
36243
2787.95
... More
Providing and fixing stainless steel double bowl sink with drainage board of Super DUPLEX No-6321 Mat finished or of approved standard with C.P. waste and with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting.as per HP.PWD., specification Volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. 610x510 mm with bowl depth 230 mm
2
10976
5488
... More
Providing & fixing vitreous China Pedestal for wash basin complete recessed at the back for reception of pipes & fittings as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.
23
43400
1886.98
... More
Providing and fixing first quality of white shade viterous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately)as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. Flat back type large urinal no 60001 of Cera
7
14148
2021.22
... More
Providing and fixing automatic flushing cistern with a pair of C.I. or M.S. bracket complete with a pair of C.I. or M.S. bracket complete with fittings including C.I. syphonic apparatus, mosquito proof lid, C.P. brass union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over floe pipe to be measured and paid for separately) including carriage of materials within all leads and lifts :- 10 litres capacity.
7
18591
2655.91
... More
Providing & fixing C.P. brass waste for wash basin/urinalsand sink 32mm ( Thirty two milimeter ) dia as per HP.PWD.,specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.
15
3663
244.26
... More
Providing & fixing 600mm x 450mm ( six hundred milimetre into for hundred fifty milimetre ) bevelled edge mirrior of superior glass mounted on 6mm (six milimeter ) thick A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws & washers as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.
13
19206
1477.46
... More
Providing & fixing 600mm x 120mm ( six hundred milimetre intoone hundred twenty milimetre ) glass shelf with C.P.brass bracket and guard rail complete, fixed to wooden plugs with CP brass screws as per HP.PWD., specification Volume-I (one) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-charge.
2
1778
889.26
... More
Providing and fixing C.P. brass flush pipe / spraders for urinal with fittings such as unions, clamps etc.( all C.P.) including cutting holes and making good the same.as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. 15 mm nominal bore.
8.4
5129
610.65
... More
Providing & fixing 100 mm dia C.P. grating for floor or nahani / gully / floor trap including carrage of material as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
26
3175
122.13
... More
Providing and fixing Galvinished mild steel puff pipe 1 m long with brass perforated cap with 15 mm dia as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
10
1764
176.41
... More
Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws .as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
600 X 20 mm
2
1614
807.06
... More
Providing and fixing C.P. brass toilet paper holder as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
2
994
497.46
... More
Providing and fixing Glass liquid soap container with C.P. brass lid and rackets fixed to wooden plugs with C.P. brass screwsas per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.:-
2
328
164
... More
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
9
5440
604.55
... More
Providing and fixing 15 mm mixer for kitchen simk with top / bottem swinging spout as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
3
6350
2116.92
... More
Providing and fixing 15mm dia CP brass bib tap (heavy duty ISI marked IS:8931 & 8934) of jaquar with capstan head as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.-
10
6920
692.07
... More
Providing and fixing 15mm dia CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934). as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
13
9878
759.92
... More
Providing and fixing 15mm dia C.P.brass angle valve of jaquar (heavy duty ISI marked IS:8931 & 8934) as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
47
34440
732.78
... More
Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.
47
10523
223.91
... More
Providing and fixing brass full way valve with wheelas per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
15mm nominal bore :-
3
1335
445.1
... More
20mm nominal bore :-
3
1599
533.3
... More
Providing and fixing G.I. Or M.I. Union of following sizes ( where not includedin the item) .as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
15mm nominal bore :-
15
3155
210.34
... More
20 mm nominal bore :-
10
2374
237.48
... More
32 mm nominal bore :-
10
2646
264.62
... More
Providing and fixing15mm PTMT fancy bib cock with spout no .1391 of approved quality and colour as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
6
4559
759.92
... More
Providing and fixing 15mm PTMT fancy pillar cock with spout no .1391 of approved quality and colour as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
4
3057
764.27
... More
Providing and fixing PTMT push cock of Prayag with reducer of approved quality and colour as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
20 mm x15 mm
5
2442
488.52
... More
Providing and fixing PTMT concealed stop cock of Prayag with flange of approved quality and colour as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
15 mm nominal bore.
5
2781
556.37
... More
Providing and fixing PTMT angle cock of Prayag of approved quality and colour as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
15 mm with flange
10
6242
624.22
... More
Providing and fixing PTMT jet spray with 1 m tube of Prayag of approved quality and colour as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
5
2442
488.52
... More
Providing and laying 150 mm dia ( to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches.as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
30
21621
720.71
... More
Providing and laying cement concrete 1:4:8 (1 Cement : 4 Sand : 8 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete : as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. :- 150 mm.
30
8802
293.4
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :200mm Dia.
65.2
56624
868.48
... More
Providing and fixing grab bars in handicaped toilet of CP 40 mm dia steel pipes 78 cm heigh welded with MS plate as per detail and position of WC seat.as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
2
4532
2266.19
... More
Providing and fixing 32 mm dia PVC waste as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.pipe ( 60 CM long) for wash basin and sink
22
5373
244.26
... More
Providing and fixing 455 mm X 610 mm precast reinforced cement concrete cover with frame for manholes complete as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
3
5495
1831.95
... More
Constructing manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 ( icement ; 4 sand : 8 graded stone aggregate 40 mm nomonal size), inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
-
-
-
... More
with 230mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) :-as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
Inside size 800mmx800mm and 1000mm deep including precast RCC cover with frame (heavy duty s) 455 mm X 610 mm internal diamensions.with 230mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) :-
2
41058
20529
... More
Providing and fixing PVC gully trap complete with C.I. grating, brick masonry chamber in cement mortar 1:5 and water tight precast cemocrete cover with frame (medium duty) of 300 mm dia (inside) including carriage of materials within all leads and lifts
-
-
-
... More
180mmx100mm size P type
2
1709
854.93
... More
180mmx150mm size P or R type
2
2252
1126.31
... More
Constructing brick masonry in C.M 1:5 road gully chamber 500mmx450mmx600mm including 500mmx450mm C.I. Horizontal grating with frame complete.as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
2
36082
18041
... More
Providing and installing Mono Block Electric pump 2 HP single phase of Kirloskar make or equivalent including fixing complete.as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
1
12000
12000
... More
Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs. Depth of cutting :- as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge. Holes upto and including 400 Sq.cm in area.
150
300
2
... More
Cutting holes upto 15 cm x 15 cm in R.C.C beams / floors and roofs for passing drain pipe etc. and repairing the holes after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) including finishing complete so as to make it leak proof.as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
30
2466
82.2
... More
Supplying and fixing 300 mm X 300 mm precast RCC cover with frame for gully trap complete .as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
20
7276
363.8
... More
Supplying and filing brick bats in soakpit of following sizes including carriage of materials within all leads and lifts :-
2.79
4185
1500
... More
Supplying and filing crushed stone aggregate in soakpitof following sizes.as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
-
-
-
... More
25 mm nominal size
1.32
1452
1100
... More
12 mm nominal size
1.32
1452
1100
... More
Providing concrete plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 & 1203.(m-10) as per HPPWD., specification volume-I ( one ) including carriage of all labour equipment & materials to various location through all leads,lifts & other incidental charges complete as per entire satisfaction of the Engineer-in-Charge.
344.96
2376612
6889.53
... More
Providing and laying filter media with granular material behind retaining wall/breast wall as per specification 1204.3.8 jin a width of 600mm including hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.
30.78
57450
1866.5
... More
Providing and laying in weep holes of retaining walls/ breast walls 100mm dia PVC(D-Plast) pipes of working pressure not less than 4.5 Kg per sqm. as per drawing and H.P.P.W.D. technical specifications. including the cost of form work and hauling of material in all leads and lifts as per the entire satisfaction and direction of the Engineer-in-Charge.
136.6
49241
360.48
... More
Supply and placing work top/ office table of Standared size the main table shall be free standing structure constructed with the help of wodden frame and block board. The work top consisting drawer and A movable type CPU unit shall be provided with key board unit in all leads and lift as per direction of Engineer-in -charge.
21
525000
25000
... More
Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position.
2.93
368083
125797.35
... More
Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows.including black enamelled iron butt hinges with necessary screws.40mm thick
57.51
297751
5177.38
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements