Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jan 2025
Closing Date3 Feb 2025
Tender Amount₹ 4,39,13,734
Costs
EMD
₹ 8,78,300Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Rajiv Gandi Govt. Model Day Boarding School Manjhar In Fatehpur District Kangra Hp Sub Head Construction Of Building Portion Ground Floor Including Water Supply And Sanitary Installation And Septic Tank And Soak Pit
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_98586_1Tender No
5724-33 dated 16.01.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs, landings, shelves, balconies and access platform and the like floor etcetera upto any thickness upto all floor level as per approved drawing and design or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
906.9
614
557653
... More
Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers upto any height/ depth/ thickness upto all floor level as per drawing and design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1461.08
539
787960
... More
Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Columns, Pillars, posts and struts, (square, rectangular or polygonal in plan) in any height/ thickness/ depth upto all floor level as per approved drawing and design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government..
521.4
692
361174
... More
Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Stair cases with sloping or stepped soffits excluding landings upto all floor level as per drawing and design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
31.34
576
18068
... More
Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centring in all heights below supporting floor to ceiling upto any height and removal of the same for in-situ- reinforced concrete and plain concrete work in: Edges of slabs and breaks in floors and walls upto any width, upto all floor level as per drawing and design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
264.44
164
43500
... More
Providing form work with steel plates 3.15mm (three point one five milimetre) thick welded with angle iron in frame 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for insitu reinforced concrete and plain concrete work in lintels exceeding any span moulding as in window sills, cornices, string courses, bands, copings, bed plates, anchor blocks and the like upto all floor level complete as per H.P.P.W.D. specification or as per the directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
55.45
740
41033
... More
Providing and laying in position mechanically mixed and vibrated cement concrete 1:4:8 (One cement isto four sand isto eight graded/ crushed stone aggregate 40mm (Forty milimetre) nominal size) and curing complete excluding the cost of form work: All works upto plinth level/ depressed floor in all depths including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
180.53
5611
1013098
... More
Stone filling tightly hand packed with hard stone of approved quality under floor including watering, ramming, consolidated and dressing complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
147.64
1088
160647
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N / mm2 (twenty newton per square millimetre) for reinforced cement concrete work using cement contents not less than @ 330kg/cum (at the rate of three hundred thirty kilogram per cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera as per specifications, approved drawing, design and as directed by the Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
404.36
8431
3409240
... More
Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M- Twenty) design mix to obtain the minimum compressive strength of 20N/ mm2 (twenty newton per square millimetre) for reinforced cement concrete work using cement contents not less than @ 330kg/cum (at the rate of three hundred thirty kilogram per cubic metre) or as per approved design mix. All works above plinth level upto all floor level to give a smooth surface mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera as per specifications, approved drawing, design and as directed by the Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
533.86
9574
5111389
... More
Coursed rubble masonry (first sort) with hard stones of approved quality in foundation and plinth upto all height/ depths including pumping or bailing out water/dewatering with cement mortor 1:6 (One cement isto six sand) and curing complete as per HP:PWD. specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
113.98
6733
767462
... More
Coursed rubble masonry (first sort) with hard stones of approved quality in foundation and plinth upto all height/ depth including pumping or bailing out water/dewatering with cement mortor 1:5 (One cement isto five sand) and curing complete as per HP:PWD. specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
59.82
6922
414086
... More
Steel reinforcement Thermo-mechanically treated bars of grade Fe-500 (D) (five hundred D) of Tata/Sail for reinforced cement concrete work including straigthening, cutting, bending, binding and placing in position complete upto all floor level as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
131582.8
108
14316209
... More
Providing and laying damp proof course 100mm (one hundred milimetre) thick with cement concrete 1:2:4 (One cement isto two sand isto four graded/ crushed stone aggregate 20mm (twenty milimetre) nominal size) and curing complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
112.33
859
96570
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade-ten) of approved quality using 1.70 kg (One point seven zero kilogram) per square Metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked with kerosene oil complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
112.33
145
16344
... More
Half brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 (seven decimal five) in super structure above plinth level to all floor level in cement mortar 1:4 (One cement isto four sand) and curing complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
194.09
980
190363
... More
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 (seven decimal five) in super structure above plinth level to all height/ floor level in cement mortar 1:6 (One cement : six sand) and curing complete as per HP:PWD. specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
136.27
7976
1086971
... More
30 Cm (Thirty Centimetre) / 40 Cm (forty centmetre) thick Cavity wall with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 (seven decimal five) with 7cm (seven centimetre) / 17cm (seventeen centimetre) wide cavity and consisting 11.5 cm ( Eleven decimal five centimetre) thick inner and outer walls laid in cemnet mortar 1:4 ( one cement isto four sand) and strength with hoop iron and bituminious coated M.S. ties 300mm (three hundred milimetre) long of 25x3mm (twenty five into three milimetre) section at the rate of three ties per square metre including making weep hole and vent holes complete 6/8 ( six / eight )width brass in Z- shape crossing each other shall be provided at the interval 90-100 cm ( ninety - one hundred centimetre) length horizontal and vertical in cavity wall and curing complete (The mesurement of wall faces only one side will be considered for payment) , as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
305.35
2135
652136
... More
Half brick masonry with Machine made exposed bricks in superstructure above plinth level up to floor all level with Cement mortar 1:4 (one cement :four coarse sand) as per approved drawing, design or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
238.4
2186
521262
... More
Providing and fixing factory made uPVC white colour casement/ casement fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded (upto any area) profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero plus minus zero point two milimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundred into eight milimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etcetera Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Casement window single panel with S.S. friction hinges 400 x 19 x 1.9 mm (four hundred into nineteen into one point nine milimetre) /350x19x1.9mm (three hundred fifty into nineteen into one decimal nine milimetre) made of (big series)frame 67 x 60 mm (sixty seven into sixty milimetre) and sash 67 x 80 mm (sixty seven into eighty milimetre) both having wall thickness of 2.3 ± 0.2 mm (two point three plus minus zero point two milimetre) and single glazing bead / double glazing bead of appropriate dimension upto any area of windows, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
147.64
9380
1384887
... More
Providing and fixing factory made of uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded (upto any area) profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero plus minus zero point two milimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D (three D)hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm (One hundred into eight milimetre) size for fixing frame to finished wall and necessary stainless steel screws, etcetera Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge, (Single / double glass panes and silicon sealent shall be paid separately). Casement door with 3D (three D) hinges made of (big series) frame 67 x 64 mm (sixty seven into sixty four milimetre) and sash 67 x 110 mm (sixty seven into one hundtred ten milimetre) both having wall thickness of 2.3 ± 0.2 mm (two point three plus minus zero point two milimetre) and single glazing bead / double glazing bead of appropriate dimension upto any area of door, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
57.2
10047
574723
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded (upto any area) profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero plus minus zero point two milimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D (three D)hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm (One hundred into eight milimetre) size for fixing frame to finished wall and necessary stainless steel screws, etcetera Profile of frame and sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-in-Charge, (Single / double glass panes and silicon sealent shall be paid separately). Casement door with top hung ventilator with 3D (three D) and stainless steel hinges 400x19x1.9mm (four hundred into nineteen milimetre into one decimal nine milimetre) made of (big series) frame 67x64mm (sixty seven into sixty four milimetre) sash 67x110mm (sixty seven into one hundred ten milimetre) and mullion 67x80mm (sixty seven into eighty milimetre) all having wall thickness of 2.3 ± 0.2 mm (two point three plus minus zero point two milimetre) and single glazing bead / double glazing bead of appropriate dimension upto any area of door, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9.5
10256
97441
... More
Providing and fixing fly proof stainless steel grade 304, wire gauge of 0.5mm (Zero point five milimetres) diameter wire and 1.4mm (One point four milimetre) average width of aperture in both directions in windows and doors with stainless steel flat 15x3mm (fifteen into three milimetre) and nuts and bolts complete, as per drawing and technical speifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
49.21
1364
67152
... More
Providing and fixing 8mm (eight milimetre) thick anodised aluminium grill (anodised transperant or dyed to required shade according to IS: 1868) with minimum anodic coating of grade AC-15) (Fifteen) of approved design pattern with approved standard section and fixed to the existing windows frame with C.P. brass/ stainless steel screws @ 200mm (at the rate of two hundred milimetre) centre to centre including cutting the grill to proper opening size for fixing and operation handles and fixing aluminium standard section around the openings all complete as per approved drawing, design and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
220.1
536
118062
... More
Providing and fixing 12mm (twelve milimetre) thick Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etcetera complete ( Frames, backing or studding to be paid separately). Pre-laminated MDF board both side / phenol bonded particle board in uPVC style of encraft or its equivalent as per approved drawing, design and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
59.66
1029
61408
... More
Providing and fixing 35 mm (thirty five milimetre) thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply (three ply) veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws. and PGI sheet lining inside of the shutters of approved shade as per specification, approved drawing, design and as directed by the Engineer-in-Charge, complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
10.67
3545
37826
... More
Providing and fixing glazing with glass panes of 5mm (five milimetre) thickness of Modiguard / Saint Gobian for shutters of doors, windows, ventilatorsand partitions (weight not less than 12.50kg/sqm ((twelve point five zero kilogram per square metre) with EPDM rubber/ neoprene gasket and nails as per approved drawing design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
90.69
1299
117806
... More
Providing and fixing glazing with frosted glass panes of 4mm (four milimetre) (thickness weight not less than 10.00 kg/sqm (ten kilogram per square metre) of modiguard/Saint Gobian for shutters of doors, windows, ventilators and partitions with EPDM rubber/ neoprene gasket with necessary screws and nails complete, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
15.64
1335
20887
... More
Providing and fixing complete box of cup board made of 19mm (nineteen milimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ Kit ply /duro ply / Marion Centuary ply (ISI Marked) including 19mm (nineteen milimetre) thick shelves. Back side of the cupboard shall be of 6/ 8mm (six obleque eight milimetre) thick water proof ply as per detail in drawing. All cut portion of board shall have 6mm (six milimetre), hard wood edging. The shutters from all sides also have 6/12mm (sx obleque twelve milimetre) thick hard wood edging. The shutter from out side shall be finished with 1mm (One milimetre) thick lamination of Century greenlam/action Tesa/merinolam of approved shade and fixing top PTMT handles 125mm (one hundred twenty five milimetre) long shall be provided in wood colour with nickel plated bright finished piano hinges with necessary screws etcetera complete (area for payment shall be measured from front only) as per approved drawing, design and specification and further as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
32.73
5143
168343
... More
Providing and fixing Magnetic catcher of approved quality in cup board/ ward robe shutters including fixing with necessary screws etcetera complete, as per approved drawing, design, specification and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
208
256
53331
... More
Providing and fixing 65mm (sixty five milimetres) special quality chromium plated brass cup board locks or ward robe locks with six levers of approved quality including necessary screws etcetera complete (Indian make of approved quality) as per approved drawing, design, specification and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
78
301
23501
... More
Providing and fixing 25mm (twenty five milimetre) diameter stainless steel curtain rod having wall thickness of 1.25mm (one point two five milimetre) with two chromium plated brass bracket fixed with C,P. brass crews and P.V.C. sleeves etcetera wherever necessary complete as per approved drawing, design, specification and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
44.2
510
22569
... More
Providing and fixing 300x16mm (Three hundred into sixteen milimetre) anodized aluminum sliding door bolts ISI marked anodised (anodic coating not less than grade AC-10 (Ten) as per IS 1868), transperant or dyed to required colour and shade with bolts, nuts and necessary screws etcetera complete as per specifications, approved drawing and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
266
533
... More
Providing and fixing 250x16mm (two hundred fifty into sixteen milimetre) aluminium sliding door bolt ISI marked anodised (anodic coating not less than grade AC-10 (Ten) as per IS: 1868), transperant or dyed to required colour and shade with bolts, nuts and necessary screws etcetera complete as per specifications, approved drawing and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
239
479
... More
Providing and fixing 250x10mm (two hundred fifty into ten milimetre) anodized aluminum Tower bolts(Barrel type) ISI marked anodized (anodic coating not less than grade AC-10 (Ten) as per IS:1868), transperant or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
4
108
434
... More
Providing and fixing 150x10mm (One hundred fifty into ten milimetre) anodized aluminum Tower bolts(Barrel type) ISI marked anodized (anodic coating not less than grade AC-10 (Ten) as per IS:1868), transperant or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
4
78
315
... More
Providing and fixing 150mm (One hundred fifty milimetre) aluminum handles ISI marked anodized (anodic coating not less than grade AC-10 (Ten) as per IS: 1868), transperant or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
73
147
... More
Providing and fixing 125mm (One hundred twenty five milimetre) aluminum handles ISI marked anodized (anodic coating not less than grade AC-10 (Ten) as per IS: 1868), transperant or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
66
133
... More
Providing and fixing 250mm (Two hundred fifty milimetre) size bright finished brass hard drawn hooks and eyes complete in all respect, as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
5
87
437
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door colser (having brand logo with ISI, IS: 3564 embossed on the body with necessary screws etcetera complete as per specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1
1045
1045
... More
Providing and fixing aluminium hanging twin rubber door stopper ISI marked anodized (anodic coating not less than grade AC-10 (Ten) as per IS: 1868), transperant or dyed to required colour and shade with necessary screws etcetera complete as per specifications, approved drawing and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
38
65
2493
... More
Providing and laying 19mm (ninteen milimetre) thick polished Grey/ Chima Pink Granite in combination with black granite as per pattern and detail in flooring laid over 20mm (Twenty milimetre) thick base of cement mortar 1:4 (one cement : four sand) and jointed with grey/ white cement slurry mixed with pigment to match the shade of Granite stone including rubbing and polishing complete as per Architectural drawing, design and specifications, or as per the direction of Engineer-in-Charge, upto all floor levels, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
94.04
5242
492986
... More
Providing and fixing 18 mm (eighteen milimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Baroda green marble slab having Semi Round nosing in work top of Pantary / under counter wash basin and water trough and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty milimetre) thick base of cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete upto all levels, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
31.3
3208
100439
... More
Providing and laying double charged anti skid water proof stain and impact resistant heavy duty vitrified tiles of Kajaria/Orient /Restile/ Nitco/ Rak/Bell/AGL/Sim Polo/Johnson/ Somany as per approved shade and design of the office size of tile 600mmx600mm (six hundred isto six hundred milimetre) (thickness to be specified by the manufacturer) with water obsorption less than 0.08% (zero point zero eight percent) and confirming to IS: 15622, of approved make in all colours in flooring, treads of steps and landings laid on a bed of 20mm (twenty milimetre) thick cement mortar 1:4 (one cement isto four coarse sand) jointed with cement slurry @ 3.3kg/sqm (at the rate of three point three kilogram per square metre) including curing and grouting of joints with white cement mixed with pigment to match the shade of tiles as required up to all floor level, complete as per HPPWD specifications, drawing and design or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
79.54
1572
125101
... More
Providing and laying Mirror polished 25mm (twenty five milimetre) thick Kota stone slab and white marble flooring of size 55x55cm (fifty five into fifty five centimetre) in 70:30 (seventy isto thirty) ratio as per flooring pattern of uniform colour in flooring laid over 20mm (twenty milimetre) average thick base of cement mortar 1:4 (one cement isto four coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete as per Architectural Drawing, design and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
615.35
1956
1204055
... More
Providing and laying 300x300mm (three hundred into three hundred milimetre) antiskid ceramic tiles of Nitco/ Orient/ Kajaria of first quality confirming to IS: 15622 of approved make in all colours in flooring laid on 20mm (twenty milimetre) thick base of cement mortar 1:4 (one cement isto four coarse sand) jointed with grey cement slurry @ 3.3kg/sqm (at the rate of three point three kilogram per square metre) including grouting of joints with white cement and matching pigments etcetera complete as per HPPWD specifications, drawing, design or as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
55.38
1385
76740
... More
Providing and fixing 2mm (two milimetre) thick PVC antistatic venyl flooring plain or colioured, carbed or mosaic/ metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately), as per approved drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
76.69
1697
130166
... More
40mm (Forty millimetre) thick cement concrete flooring 1:2:4 (One cement : two sand : four graded/ crushed stone aggregate 20mm (Twenty millimetres) nominal size) mechanically mixed laid in one layer and finished with a floating coat of neat cement and curing complete upto all floor level as per drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. Government.
83.85
499
41900
... More
Providing and laying 25mm (twenty five milimetre) thick Kota stone in single piece with uniform nosing/ edging in flooring, treads of steps as per detail laid over 20mm (twenty milimetre) thick base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete as per approved drawing and direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
26.4
2126
56145
... More
Providing and laying 25mm (twenty five milimetre) thick Kota stone slab in single piece of uniform colour in skriting/ risers of steps, dado and pillars laid on 12mm (twelve milimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurrymixed with pigment to match the shade of slab including rubbing and polishing complete as per Architectural drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
14.1
1845
26015
... More
Providing and laying 300x450mm (three hundred into four hundred fifty millimetre) white glazed tiles of Kajaria/ Nitco/ Somany/ Orient and Bell of 6mm (six milimetre) thickness in skriting, risers of steps and dado on 12mm (twelve milimetre) thick cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry at the rate of 3.3kg per sqm (three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete as per drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
255.17
1336
341009
... More
Providing and fixing 40mm (forty milimetre) thick fine dressed red mandana stone flooring over 20mm (twenty milimetre) (average) thick base of cement mortar 1:5 (one cement : five coarse sand), pointing with cement mortar 1:2 (one cement : two stone dust) with an admixture of pigment to match the shade of stone as per approved drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
60.04
1374
82519
... More
Probvioding and laying Kota stone slab 20mm (Twenty milimetre) thick in risers of steps, skriting dado and pillars laid on 12mm (twelve milimetre) (average) thick cement mortar 1:3 (one cement : three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per approved drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
45.33
1820
82501
... More
Providing and laying Double charge vetrified tiles of size 600x600mm (six hundred into six hundred milimetre) (thickness to be specified by the manufacturer) of Nitco/ Restile/ Kajaria/ Orient-Bell/AGL/Simpolo/ Johnson/Somany with water absorption 0.08% (zero point zero eight percent) and confirming to IS: 15622 of approved brand and manufacturer in all colours and shade in skriting,risers of steps laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477 in average 6mm (six milimetre) thickness including grouting of joints complete in all respect upto all floor level as per the directions of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
6.99
1745
12200
... More
18mm (eighteen milimetre) thick cement plaster skriting upto any height with cement mortar 1:3 (one cement : three coarse sand), finished with a floating coat of neat cement as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
5.31
513
2726
... More
Providing and fixing railing for stair case having baluster of mild steel solid square bars 19mmx19mm (nineteen milimetre into nineteen milimetre) and 12x12mm (twelve milimetre into twelve milimetre) size in combination with M.S. (Mild steel) flat 40mm x 6mm (forty milimetre into six milimetre) with a clear height of 85cm (eighty five centimetre) at 30 cm (thirty centimetre) centre to centre embedded in reinforced cement concrete steps. The vertical balusters to be welded /jonted with M.S (Mild steel) hand rail of hollow rectulanger pipe of 14 to 16 (fourteen to sixteen) gauge 75x40mm (seventy five into forty milimetre) size. The baluster welded/ jointed with each other with two numbers mild steel flat 50x5mm (fifty into five milimetre) including painting with red lead paint after pretreatment of the surface complete as per approved drawing , design and specifications. including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1056.1
145
153768
... More
Providing and fixing 40mm (forty milimetre) dia M.S. (Mild steel) hollow pipe handrail of ramp, slip resisance at two level as 75cm and 90 cm (seventy five centimetre and ninety centimettre) height with round ends and 25mm (twenty five milimetre) diameter M.S. (mild steel) hollow pipe balusters of 14 to 16 ( fourteen to sixteen) gauge at 60cm (sixty centimetre) centre to centre welded at top with hand rail and embedded in cement concrete. The hand rail should be extend 30cm (thirty centimetre) beyond the top and bottom of the ramp as per detail, approved drawing, specifications and as directed by the Engineer-in-Charge, including painting with red lead paint after pretreatment of the surface and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
381
145
55474
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etcetera including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting, the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etcetera of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etcetera including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1415.7
592
839085
... More
Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero square meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm (three hundred milimetre) vertically. The seconnd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement isto four coarse sand) and mixed with Pidiproof LW at the rate 200ml (two hundred mililitre) per 50kg (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky complete as per approved drawing, specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
55.38
469
26001
... More
Providing and fixing 150mm (One hundred fifty milimetre) diameter on wall face P.V.C. (D-Plast) rain water pipes of working pressure not less than 4.50 kg/Cm² (Four point five zero kilogram per square centimetre) ISI marked of finolex/ supreme / Prince / Relpipe(Reliance)/Vectus including filling the joints with approved adhesive including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
117
462
54066
... More
Providing and fixing PVC plain bend 150mm (One hundred fifty milimetre) diameter on wall face PVC (D-plast) accessories of finolex/ supreme / Prince /Relpipe(Reliance)/Vectus for rain water pipes including filling the joints with approved adhesive complete, as per design, drawing and specification, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
39
267
10433
... More
Providing and fixing PVC Shoe 150mm (One hundred fifty milimetre) diameter on wall face PVC (D-plast) accessories of finolex/ Relpipe (Reliance)/Vectus for rain water pipes including filling the joints with approved adhesive complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
30
239
7173
... More
Providing and fixing 150mm (one hundred fifty milimetre) PVC pipe clips of Supreme/ Finolex/ Vectus of approved design to PVC rain water pipe by means of 50x50x5mm (fifty into fifty into five milimetre) hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (one cement isto four sand) and making good the wall etcetera complete as per approved drawing, design and specifications complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
117
258
30233
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle section of size 25x25x5mm (twenty five into twenty five into five milimetre) joints, mitred and welded by angle iron 25x25x5mm (twenty five into twenty five into five milimetre) or 25x5mm (twenty five into five milimetre) flat pieces to the existing T-iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per approved drawing or as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
210.12
117
24731
... More
Providing and fiixing decorative screen in entrance verandah/ corridor manufactured from 25x25mm (twenty five into twenty five milimetre) hollow square pipes welded with M.S. hollow section of size 50x50mm (fifty into fifty milimetre) supported on 10cm (ten centimetre) diameter M.S. hollow pipe, centre piece shall be of 25x3mm (twenty five into three milimetre) M.S. flat frame covered with M.S. black sheet made cut to shape as shown in the drawing and beading all round the pattern of 8x8mm (eight into eight milimetre) square soild bars as per detail. M.S. black sheet box bracket covered with M.S. flat covering in shape as per detail and applying a priming coat of approved steel primer as per specifications, approved drawing or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
157.8
117
18573
... More
Smooth finishing of the exposed surface of R.C.C. work with 6 mm (six milimetre) thick cement mortar 1:3 (one Cement : three fine sand), including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9.36
213
1994
... More
Providing and fixing 595x595x6 mm (Five hundred ninety five into five hundred ninety five into six millimetre) ACP ceiling with pre-painted GI channel framing at the rate of 600 mm (Six hundred millimetre) centre to centre complete as per HPPWD specification,approved drawing, design and as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
18.82
1527
28738
... More
Providing and fixing Wooden Penelling of 600x1200x25 mm( six hundred into twelve hundred into twenty five millimeters) fixed with steel screw as per detail drawing and specification or as per direction of Engineer-in -Charge including, carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
99.55
4630
460956
... More
Providing and fixing 240x120 cm (two hunmdred forty into one hundred twenty centimetre) having 12mm (twelve milimetre) thick green chalk board (non megnetic) with superior quality framing specially anodized aluminium Profile 20x15mm (twenty into fifteen milimetre) with corners of black surface shall be non porous ceramic particles on the top green surface for smooth writing with chalk over 11mm (eleven milimetre) thick particle board which shall have backing material of galvanized sheet 0.28mm ( zero point two eight milimetre) thick approximate, The board shall be fixed on the wall with specially designed "J" clamp and square clamps with the help of nylon sleves and screws as per site requirements and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
8635
17271
... More
Painting steel works with Deluxe Multi surface paint of Asian/ Nerolac to give an even shade two or more coats applied @ 0.90 litre/10sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80litre/10sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture complete as per approved drawing, specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
80.36
115
9314
... More
Painting wood works with Deluxe Multi surface paint of Asian/ Nerolac of required shade (two or more coats) applied @ 0.90 litre/10sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75litre/10sqm (at the rate of zero point seven five litre per ten square metre) of approved brand and manufacture complete as per approved specification, drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
86.8
120
10468
... More
6mm (Six milimetre) thick cement plaster to ceiling with cement mortar 1:3 (One cement isto three sand) upto all floors level and curing complete as per specifications, drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
853.93
213
181887
... More
15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including making groove or drip course, arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth and curing complete as per approved drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1153.32
276
318662
... More
15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement isto six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including making groove or drip, arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth and curing complete as per approved drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1153.32
272
314510
... More
15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:5 (One cement isto five sand) in single coat on fair side of brick/ concrete/ stone walls for exterior plastering upto floor all level including making groove or drip, arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth and curing complete as per approved drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
864.78
283
244819
... More
15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:3 (One cement isto threre sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including making groove or drip, arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth and curing complete as per approved drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
90.6
384
34854
... More
Forming groove of 15mm (fifteen milimetre) wide and 15mm (fifteen milimetre) deep groove size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1083.94
52
57340
... More
20mm (Twenty milimetre) thick pattern in cement plaster with cement mortar 1:4 (one cement isto four sand) complete as per Architectural Drawings, design H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9.36
344
3223
... More
Providing and laying 18 mm (eighteen milimetre) ) thick cement mortar raised band in Plaster with cement mortar 1:4 (One cement isto four sand) complete as per Architectural drawing ,design, specification and as directed by Engineer-in-Charge, complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
69
7
536
... More
Providing Plinth protection with 40 mm (Forty milimetres) thick interlocking tiles/ cement concrete paver blocks with 23 cm (Twenty three centimetre) diameter Half round Reinforced cement concrete pipe for drainage purpose laid over 10cm (ten centimetre) thick cement concrete 1:4:8 (One cement isto four sand isto eight graded stone aggregate) in bedding/ haunching of pipe complete as per Architectural drawing ,design and specifications, or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
221.74
2225
493549
... More
Applying JK/ Birla white cement based putty of average thickness 1mm (one milimetre) of approved brand and manufactuer over the plastered wall sureface to prepare the surface even and smooth complete after thoroughly brushing the surface free from mortar drops, dirt, dust, loose material and other foreign matters and sand papered smooth to give final matt finish to the surface upto all floor level complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3670.63
110
405972
... More
Finishing walls with Apex weather proof exterior emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre (fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied at the rate 1.43 litre/ 10 sqm. (one point four three litre per ten square metre) Over and including priming coat of exterior primer applied at the rate of 0.90 litre/10 sqm (zero point nine zero litre per ten square metre) upto all floor level as per Architectural drawing ,design and specifications including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
864.78
136
117697
... More
Wall painting (two or more coats) with santhetic acrylic washable emulsion paint of Asian / Dulux /Berger paints/Nerolac paints (above Dado/skirting) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth as per Architectural drawing ,design and specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
730.35
99
72889
... More
Distempering (two or more coats) with first quality synthetic / acrylic washable distemper of Asian Paint / Nerolac Paints, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, (fifty gram per litre) of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour complete as per specifications, drawing and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2308.67
73
168533
... More
Expension joint system related with wall joint (internal and external) location as per drawing and direction of Engineer-in Charge. The joint shall be filled with polysterence back or rod base member self alinging /centering arrangement and support. The material shall be such that it provides as expension joint system suitable for vertical wall to wall/ wall to corner application, both new and exisitng construction in office building and complexes with no slipping down tendancy amongest the component of the joint, system shall be filled with sealent of Dr. Fixit/Pedelite C.I. Co. T-680. The joint shall utilize light weight with polysterence back or rod surfaces mechanically snap locking multicelluar to facilitate movement as per specification and approved drawing and as per the direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
17.66
475
8389
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (twenty into ten into two milimetre) and braced with flat iron diagonals 20x5 mm (twenty into five milimetre) size, with top and bottom rail of T-iron 40x40x6 mm, (forty into forty into six milimetre) with 40 mm (forty milimetre) diameter steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
7.5
8906
66796
... More
Providing and laying in position cement concrete 1:2:4 (One cement isto Two Sand isto Four graded stone aggregate 20mm (Twenty milimetre) nominal size) of specified grade and curing complete excluding cost of form work in: All works upto plinth level as per Architectural drawing ,design and specifications and as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
22.09
7187
158763
... More
Providing and laying 60mm (sixty milimetre) thick factory made heavy duty precast cement concrete inter locking paver blocks of M-30 (M-Thirty) grade made by block making machine with strong vibratory compaction of approved size, design and shape laid in required colour and pattern over and including 50mm (fifty milimetre) thick bed of coarse sand, filling the joints with fine sand etcetera all complete as per specifications and as per the direction of Engineer-in-Charge, including curing complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
525.2
1149
603875
... More
Providing and laying in position cement concrete 1:3:6 (One cement isto Three sand isto six graded stone aggregate 40 mm (forty milimetre) nominal size) of specified grade and curing complete excluding cost of form workin: All works upto plinth level as per Architectural drawing ,design, specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
52.52
6119
321417
... More
Providing and fixing polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipes U.V. stabalized with carbon black and fittings of kitec confirming to IS 15450-2004 having thermal stability for hot and cold water supply capable to with stand teprature upto 80 degree (eighty degree) centigrade including all special fittings of composite material (Engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 (one) metre spacing including cutting chases and making good the wall and testing of joints etcetera complete as per specification and as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. (i) 1620 (20mm) OD [(one thousasnd six hundred twenty) (twenty milimetre)] outer diameter.
135
459
62006
... More
Providing and fixing polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipes U.V. stabalized with carbon black and fittings of kitec confirming to IS 15450-2004 having thermal stability for hot and cold water supply capable to with stand teprature upto 80 degree (eighty degree) centigrade including all special fittings of composite material (Engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera with clamps at 1.00 (one) metre spacing including cutting chases and making good the wall and testing of joints complete as per specificationand as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. (i) 2025 (25mm) OD [(two thousand twenty five) (twenty five milimetre)] outer diameter
304
537
163248
... More
Making connections of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to forty milimetres) bore by providing and fixing tee including cutting and threading the pipes complete as per specification or as directed by Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1
629
629
... More
Providing and fixing 110mm (one hundred ten milimetre) nominal diametre high pressure PVC spigot and socket, waste and ventilating pipes class-A 4.00 to 4.6 mm (four to four point six milimetre) thick ISI marked of Supreme Finolex/Vectus/ Reliance(relpipe) /prince including fixing with approved adhesive etcetera complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
109.5
476
52149
... More
Providing and fixing 75mm (Seventy five milimetre) nominal diameter high pressure PVC spigot and socket, waste and ventilating pipes class-A 4.00 to 4.6 mm (four to four point six milimetre) thick ISI marked of Supreme Finolex/ Vectus/ Reliance(relpipe) / prince including fixing with approved adhesive etcetera complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
33
348
11487
... More
Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. clamps ISI marked of approved design of Supreme /Finolex/ Reliance(relpipe) Prince to PVC pipe with steel screws and rawal plugs, making good the walls etcetera complete as per specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
73
242
17724
... More
Providing and fixing 75mm (seventy five milimetre) diameter P.V.C. clamps ISI marked of approved design of Supreme /Finolex/Reliance (Relpipe) prince to PVC pipe with steel screws and rawal plugs making good the walls etcetera complete as per specification and as directed by the Engineer-in-Charge, including carruiage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
22
235
5185
... More
Providing and fixing 110mm (One hundred ten milimetre) nominal bore/diameter P.V.C. Heal Rest bend ISI marked of Supreme/ Finolex/ Relpipe(Reliance Confirming to IS No.14735-99 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
10
123
1238
... More
Providing and fixing 75mm (seventy five milimetre) nominal bore/diameter P.V.C. Heal Rest bend ISI marked of Supreme/ Finolex/ Relpipe(Reliance Confirming to IS No.14735-99 including filling the joints with approved adhesive complete as per specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3
116
350
... More
Providing and fixing 110mm (One hundred ten milimetre) nominal bore/ diameter P.V.C. plain bend of Supreme/ Finolex/ Relpipe (Reliance)/ prince complete upto all floor level conforming to IS No.14735-99 including filling the joints with approved adhesive as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
44
199
8765
... More
Providing and fixing 75mm (Seventy five milimetre) nominal bore/ diameter P.V.C. plain bend of Supreme/ Finolex/ Relpipe (Reliance)/ prince complete upto all floor level conforming to IS No.14735-99 including filling the joints with approved adhesive as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
13
113
1479
... More
Providing and fixing 110 mm (One hundred ten milimetre) nominal bore/diameter ISI marked PVC Collar of Supreme/prince / Finolex / Relpipe (Reliance) confirming to IS: 14735-99 as per HP:PWD. specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
33
156
5165
... More
Providing and fixing 75 mm ( Seventy five milimetres) nominal bore/diameter ISI marked PVC Collar of Supreme/prince / Finolex / Relpipe (Reliance) confirming to IS: 14735-99 as per HP:PWD. specifications and as directed by the Engineer-in-Charge, including fixing with approved adhesive complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
10
113
1138
... More
Providing and fixing 110 mm (one hundred ten milimetre) nominal diameter PVC Cowl ISI marked of Supreme/ Finolex/ Relpipe (Reliance)/ Prince , including fixing with approved adhesive as per HP:PWD. specifications and as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
10
106
1067
... More
Providing and fixing 75 mm (seventy five milimetre) nominal diameter PVC Cowl ISI marked of Supreme/ Finolex/ Relpipe (Reliance)/ Prince , including fixing with approved adhesive as per HP:PWD. specifications and as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3
92
278
... More
Providing and fixing ISI marked 110x90mm (one hundred ten into ninety milimetres) P.V.C. floor trap of Finolex/ Relpipe (Reliance)/ Prince/Supreme confirming to IS: 14735-99 of self cleaning design complete including fixing with approved adhesive including cost of cutting and making good the walls and floors etcetera complete as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
50
1108
55405
... More
Providing and fixing ISI marked 110x75mm (one hundred ten into seventy five milimetres) P.V.C. floor trap of Finolex/ Relpipe (Reliance)/ Prince/Supreme confirming to IS: 14735-99 of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete as per specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
16
1093
17502
... More
Providing and fixing white Vitreous china pedestal type water closet (European type) of star S.No.20087(S-10) of size 57x35x39cm (fifty seven into thirty five into thirty nine centimetre) of HIND WARE/ CERA / Jaquar of star white/ snow white shade with white solid plastic seat and lid, 10 litre (ten litre) low level white PVC flushing cistern as per drawing and detail and C.P. flush bend with fittings and cast iron brackets, 40mm (forty milimetre) flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
5
10173
50869
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type W.C. pan) Orissa pan No.20090 of size 530mmx410mm (five hundred thirty milimetre into four hundred ten milimetre) of Hindware/ Cera/ Jaquar of white shade with integral type foot rests with 100mm (one hundred milimetre) diameter sand cast iron P or S trap 10 litre (ten litre) low level flushing cistern of Hind Ware/Cera/Jaguar of star white as shown in the drawing/ as per detail including flush pipe with manually controlled device (handle lever) confirming to IS: 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
6460
12921
... More
Providing and fixing 32mm (Thirty two milimetres) diameter P.V.C. waste pipe for wash basin or sink, including PVC waste fittings complete as per specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9
235
2120
... More
Providing and fixing G.I. (galvanised iron) inlet connection for flush pipe connecting with W.C. pan, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9
123
1111
... More
Providing and fixing Vitreous china flat back under counter wash basin Garnet No. 10080 of HIND WARE/CERA/ JAQUAR 580x430mm (five hundred eighty into four hundred thirty milimetres) without pedestal with single hole for 15mm (fifteen miliometre) C.P. brass pillar tap with cast iron or mild steel brackets painted white 32mm (thirty two milimetre) C.P. brass waste pipe of standard pattern including cutting holes and making good the same including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
7
6391
44739
... More
Providing and fixing white Vitreous china flat back wash basin delta No. 10010 of size 550x400mm (Five hundred fifty into four hundred milimetre) Matrix of HIND WARE/CERA/ Jaquar of star white/ snow white shade as per drawing/ as per detail with Mirror above and single hole for 15mm (fifteen milimetre) C.P. brass pillar tap with cast iron or mild steel brackets, 32mm (thirty two milimetre) C.P. brass waste of standard pattern including painting of fittings and brackets, cutting holes and making good the same wherever required and necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1
4150
4151
... More
Providing and fixing white vitreous china large flat back range of two half stall urinal no 60002 of size 39 x 37.5 x 59 cm (thirty nine into thirty seven point five into fifty nine centimetre) with 10 litre (ten litre) white PVC automatic flushing cistern of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required and necessary fittings complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1
20179
20179
... More
Providing and fixing white vitreous china large flat back range of three half stall urinal no 60002 of size 39 x 37.5 x 59 cm (thirty nine into thirty seven point five into fifty nine centimetre) with 10 litre (ten litre) white PVC automatic flushing cistern of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required and necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1
26746
26747
... More
Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 litre (ten litre) low level white PVC flushing cistern of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details and C.P. flush bend with fittings and C.I. brackets, 40 mm (forty milimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid complete including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1
10914
10915
... More
Providing and fixing Chromium plated 40mm (forty milimetre) diameter steel pipe for grab bars at 78cm (seventy eight centimetres) height M.S. plate as per details at the position of the seat and wash basin complete as per specifications, approved drawing and as per direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3
668
2006
... More
Providing and fixing White Vitreous China Matrix Flat back wash basin 550x 400 mm (five hundred fifty into four hundred milimetre) of Cera / Hindware / Jaquar with single hole for 15 mm (fifteen milimetre) C.P. brass pillar tap with C.I. brackets, 32 mm (thirty two milimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
1
7889
7889
... More
Providing and fixing ISI marked stainless steel kitchen sink of diamond big size 610x510x200mm (six hundred ten into five hundred ten into two hundred milimetre) of approved make with drain board and C.P waste with C.I. or mild steel brackets painted white including cutting holes and making good the same complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
5
6893
34469
... More
Providing and fixing ISI marked 45cm (Forty five centimetre) long and 15mm (Fifteen milimetre) nominal bore PVC connections pipe with brass unions, complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
13
77
1006
... More
Providing and fixing ISI marked Mixer for Kitchen sink with casted swinging spout at top including necessary fittings complete as per direction of the Engineer-in-Charge, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
5
3606
18032
... More
Providing and fixing two hole basin mixing Faucet, including necessary fittings, complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
6
3464
20785
... More
Providing and fixing 100mm (One hundred milimetre) diameter chromium plated grating of continental series of Jaquar / contess plus series of Hindware / ocean series of cera / vintage series of kerovite / Hindon series of Jal superior quality for floor, gully or Nahni trap complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
50
75
3795
... More
Providing and fixing 75mm (seventy five milimetre) diameter chromium plated grating of continental series of Jaquar / contess plus series of Hindware / ocean series of cera / vintage series of kerovite / Hindon series of Jal superior quality for floor, gully or Nahni trap complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
16
68
1099
... More
Providing and fixing 600mmx450mm (Six hundred millimetres into four hundred fifty millimetre) Bevelled edge mirror of superior glass of approved quality mounted on 6mm (Six milimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers, complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9
1304
11743
... More
Providing and fixing 600mmx20mm (Six hundred milimetre into twenty milimetre) C.P. brass towel rail of continental series of Jaquar / classik series of Hindwere / ocean series / vintage series of kerovite / Hindon series of Jal with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, with concealed fittings arrangement of approved quality and colour including necessar fittings, complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9
593
5338
... More
Providing and fixing plastic liquid soap container with C.P. brass lid and bracket fixed to wooden plugs with C.P. brass screws, complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9
232
2093
... More
Providing and fixing chromium plated brass toilet paper holder ISI marked of approved brand and manufacturer of continental series of Jaquar / contess a plus series of Hindware / ocean series of cera / vintage series of kerovite / Hindon series of Jal including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
8
570
4567
... More
Providing and fixing 8mm (eight milimetre) diameter C.P./ stainles steel Jet spray make of continental series of Jaquar / contessa plus series of Hindware / ocean series of cera / vintage series of kerovite / Hindon series of Jal with flexible tube upto one metre long with stainless steel triangular plate to european W.C. of quality and make as approved by the Engineer-in-Charge complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
8
565
4523
... More
Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five milimetre) glass shelf of Continental series of Jaquar / Classic series of \Hindware /Floral series of Cera / Vintag series of Kerovite and Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty milimetre) long screws, rawl plugs etcetera, complete, .including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9
808
7278
... More
Providing and fixing 15mm (fifteen milimetre) nominal bore chromium plated brass bib tap of continental series of Jaquar / contessa plus series of Hindware/ocean series of cera / vintage series of kerovite / Hindon series of Jal of approved quality and colour confirming to IS: 8931 with capstan head superior type complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
9
957
8618
... More
Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass stop cock of continental series of Jaquar / contessa plus series of Hindware / ocean series of cera / vintage series of kerovite / Hindon series of Jal of approved quality and colour confirming to IS: 8931 including necessary fittings complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
20
1099
21998
... More
Providing and fixing 15mm (Fifteen milimetres) nominal bore C.P. brass angle valve for basin mixture and Geyser pair of approved quality confirming to IS: 8931 of continental series of Jaquar / contessa plus series of Hindware/ocean series of cera / vintage series of kerovite / Hindon series of Jal with necessary fittings complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
27
921
24875
... More
Providing and fixing 15mm (fifteen milimetre) nominal bore, 98mm (ninety eight milimetre) length and weight not less than 75gms (seventy five grams) PTMT push cock of approved quality and colour complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
7
111
778
... More
Providing and fixing 15mm (Fifteen milimetre) nominal bore brass full way valve with wheel of continental series of Jaguar/ Classik series of Hind ware with necessary fittings complete, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
10
590
5904
... More
Providing and fixing 15mm (Fifteen milimetre) nominal bore C.P. brass ball valve (Horizontal plunger type) High Pressure with polythene plastic floats of continental series of Jaquar / contessa plus series of Hindware/ ocean series of cera / Hindon series of Jal / Vintage series of Kerovite including necessary fittings and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
10
533
5335
... More
Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C single equal branch with oval access door ISI marked of Finolex/Relpipe (Reliance)/ Supreme/ Vecuts, insertion rubber washer 3mm (Three milimetre) thick bolts and nuts including fixing with approved adhesive complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
11
334
3677
... More
Providing and fixing 75mm (seventy five milimetre) diameter P.V.C single equal branch with oval access door ISI marked of Finolex/Relpipe (Reliance)/ Supreme/ Vecuts, insertion rubber washer 3mm (Three milimetre) thick bolts and nuts including fixing with approved adhesive complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3
277
832
... More
Providing and fixing 110mm (One hundred ten milimetre) diameter P.V.C. double equal branch with oval access door ISI marked of finolex / relpipe (reliance) / Vectus/ Supreme insertion rubber washer 3mm (Three milimetre) thick bolts and nuts including fixing with approved adhesive complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
11
903
9937
... More
Providing and fixing 75mm (seventy five milimetre) diametre P.V.C. double equal branch with oval access door ISI marked of finolex / relpipe (reliance) / Vectus/ Supreme insertion rubber washer 3mm (Three milimetre) thick bolts and nuts including fixing with approved adhesive complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3
604
1814
... More
Providing and fixing 110mm (One hundred ten milimetre) diameter PVC door bend with oval access door ISI marked of finolax / relpipe /Reliance/ vectus/ Supreme insertion rubber washer 3mm (three millimetres) thick bolts and nuts complete incuding fixing with approved adhesive etcetera complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
11
369
4069
... More
Providing and fixing 75mm (Seventy five milimetre) diameter PVC door bend with oval access door ISI marke of finolax / relpipe /Reliance/ vectus/ Supreme insertion rubber washer 3mm (three millimetres) thick bolts and nuts incuding fixing with approved adhesive etcetera complete, and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
3
241
725
... More
Providing and fixing 110mm (One hundred ten milimetre) diameter PVC offset 45ᵒ (Forty five degree) ISI marked of Finolex/ Relpipe (Relaince)/ Vectus/Supreme including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
6
220
1323
... More
Providing and fixing 75mm (seventy five milimetre) diameter PVC offset 45ᵒ (Forty five degree) ISI marked of finolex / relpipe/ reliance/ Vectus/ Supreme including fixing with approved adhesive etcetera complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
177
356
... More
Providing and placing on terrace (at all floor levels) three layered PVC water storage tank of ISI marked 12701 (SINTEX / Supreme /Finolex) Tripple layer complete in all respect with necessary fittings and mosquito proof coupling of approved design, 15mm (Fifteen milimetres) nominal bore ball valve with polythene float, overflow pipe, scour pipe and PVC cover with locking arrangement and necessary holes for inlet, out let and overflow pipes including providing pads of size as required and hoisting upto any height, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
5000
11
59000
... More
Providing and laying cement concrete 1:5:10(One cement isto five sand isto ten graded stone aggregate 40mm (Forty milimetre) nominal size) for the bedding of P.V.C. pipes of 150mm (one hundred fifty milimetre) internal diameter with necessary form work and curing complete,including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
300
898
269640
... More
Constructing brick masonry manhole in cement mortar 1:4 ( One cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 (one cement : one and half coarse sand (zone- III) : three graded stone aggregate 20 mm (Twenty milimetres) nominal size) mix, foundation concrete 1:4:8 (One cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (Forty milimetres) nominal size) mix, inside plastering 12 mm (Twelve milimetres) thick with cement mortar 1:3 (One cement : Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two coarse sand : four graded stone aggregate 20 mm (Twenty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimetres) and 45 cm (Forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg) (Fifteen kilogram) With Sewer bricks conforming to IS : 4885 complete as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
25
11580
289505
... More
Constructing brick masonry manhole in cement mortar 1:4 ( One cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 (one cement : one and half coarse sand (zone- III) : three graded stone aggregate 20 mm (Twenty milimetres) nominal size)mix, foundation concrete 1:4:8 mix (One cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (Forty milimetres) nominal size) mix, inside plastering 12 mm (Twelve milimetres) thick with cement mortar 1:3 (One cement : Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two coarse sand : four graded stone aggregate 20 mm (Twenty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (one hundred twenty into ninety centimetres) and upto any depth including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg) (Fifteen kilogram) With Sewer bricks conforming to IS : 4885 complete, as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
10
24748
247488
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:4 (One cement : four coarse sand) C.I. cover with frame (light duty) 355x610 mm (three hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg), (Fifteen kilogram) R.C.C. top slab with cement concrete 1:1.5:3 (One cement : one and half Fine sand : Three graded stone aggregate 20 mm (Twenty milimetres) nominal size), foundation concrete 1:5:10 (One cement : five fine sand : ten graded stone aggregate 40 mm (Forty milimetres) nominal size), inside plastering 12 mm (Twelve milimetres) thick with cement mortar 1:3 (One cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete as per standard design Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten milimetres) and 45 cm (Forty five centimetres) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) complete , as per approved drawing, design, specification and direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
35
6956
243464
... More
Providing and fixing 600x300mm (six hundred into three huindred milimetre) white viterous china Division plate of Hindware/Cera/Jaquar of star white/ snow white shade and of approved colour and quality for Urinal complete as per approved drawing, specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
15
2129
31946
... More
Providing and laying in trenches 20mm (twenty milimetres) Nominal bore galvanised mild steel tube,( medium grade) ,tube fittings ( earth work in trenches to be measured and paid separately) complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge,including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
200
425
85000
... More
Providing and fixing to wall, ceiling and floor 15mm (fifteen milimetres) Nominal bore galvanised mild steel tube,( medium grade), tube fittings and clamps including making good the wall ceiling and floor complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
200
375
75180
... More
Providing and laying (to level or slope) 150mm (One hundred fifty milimetre) nominal bore/diameter high pressure PVC pipe grade 'A' and jointing with approved adhesive ncluding testing of pipes and joints complete and carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
150
654
98115
... More
Providing and fixing 32 mm (Thirty two milimetre) diameter M.I.union for Wash basin or sink complete including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
13
307
3991
... More
Supplying and fixing cast iron cover with rectangle frame 455x610mm (four hundred fifty five into six hundred ten milimetre) (light duty) single seal pattern I, weight of cover and frame to be not less than 58 kg. (fifty eight kilogram) as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
2
1508
3018
... More
Providing and filling brick bats in soak pit, as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
164.84
1088
179362
... More
Providing and fixing 32mm (thirty two millimetre) nominal diameter C.P. (Chromium plated) brass waste for wash basin or sink complete including carriage of materials with in all leads and lifts. The rate is including octroi, malkana, toll tax, G.S.T. or any other taxes imposed by the Government.
5
252
1263
... More
Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms, upto any depth including getting out the excavated soil, and then returning the soil as required, in layers upto any depth, including consolidating each deposited layer by ramming, watering, etcetera and disposing of surplus excavated soil as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.
150
328
49260
-
-
43913734
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements