Public Works Department Tender

Providing and laying mechanically mixed and vibrated concrete for reinforced cement concrete of Grade M-35 (M-thirty five) design mix with minimum cement contents @430 kg/cum (four hundred thirty kilogramme per cubic metre) using OPC - 43 Grade (ordinary protland cement - fourty three grade) and super plasticizer admixtiure in foundation complete as per drawing and MORT&H technical specifications, clause 1000,1500,1600,1700,2100 and 2200 using batching plant, transit mixture and concrete pump as per direction of the Engineer-in-charge within all leads and lifts and other incidentials. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Supplying, fitting and placing HYSD bar reinforcement (Fe - 550) (Fe - Five hundrd fifty) made of TATA TISCON/SAIL in foundation complete as per drawings and technical specifications clause 1600 and 2200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto all heights including carriage of materials within all leads and lifts and other incidentals . The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying mechanically mixed and vibrated concrete for reinforced cement concrete of Grade M-45 (M-fourty five) design mix with minimum cement contents @450 kg/cum (four hundred fifty kilogramme per cubic metre) using OPC - 43 Grade (ordinary protland cement - fourty three grade) and super plasticizer admixtiure in sub structure complete as per drawing and MORT&H technical specifications, clause 1000,1500,1600,1700 and 2200 using batching plant, transit mixture and concrete pump as per direction of the Engineer-in-charge within all leads and lifts and other incidentials. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Supplying, fitting and placing HYSD bar reinforcement (Fe - 550) (Fe - Five hundrd fifty) made of TATA TISCON/SAIL in substructure complete as per drawings and MORT&H technical specifications, clause 1600 and 2200 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto all heights including carriage of materials within all leads and lifts and other incidentals . The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in MORT&H technical specifications, clause 2504.2.2. to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification including entire carriage of materials within all leads lifts and other incidentals and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Back Filling with granular material behind abutment, wing wall, retaining/breast wall and return wall complete as per drawings and MORT&H technical specification, clause 710.1.4 of IRC 78 & 2200 as per the direction of the Engineer-in-charge , including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm (one hundred millimetres) dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MORT&H technical specification, clauses 2706,2200 as per the direction of the Engineer-in-charge , including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications Clause 2000, 1000 & 2200 . The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying mechanically mixed and vibrated concrete for reinforced/Prestressed cement concrete of Grade M-35 (M-thirty five) design mix with minimum cement contents @425 kg/cum (four hundred twenty five kilogramme per cubic metre using ( OPC - 43 Grade (ordinary protland cement - fourty three grade) and super plasticizer admixtiure in super structure complete as per drawing and MORT&H technical specifications, clause 1000,1500,1600,1700,1800 and 2300 using batching plant, transit mixture and concrete pump as per direction of the Engineer-in-charge within all leads and lifts and other incidentials. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

P/Placing of Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-35 (M-thirty five) grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm (twenty five milimeter) diameter, 450 mm (four hundred fifty milimeter) long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH -33022/1/94-DO Ill dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified and as per directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing, fitting and fixing 65mm dia mild steel railing heavy duty including clamp and two coat painting over the RCC Crash Barrier complete as per drawing and technical specification. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Supplying, fitting and placing HYSD bar reinforcement (Fe - 550) (Fe - Five hundrd fifty) made of TATA TISCON/SAIL in superstructure complete as per drawings and MORT&H technical specifications, clause 1600 including cutting, bending, binding and placing in position complete in all respect including cost of binding wire upto all heights including carriage of materials within all leads and lifts and other incidentals . The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying mechanically mixed and vibrated concrete for reinforced cement concrete of Grade M-30 (M-thirty) design mix with minimum cement contents @415 kg/cum (four hundred fifteen kilogramme per cubic metre) using OPC -43 grade (ordinary protland cement - fourty three grade) in approach slab complete as per drawing and technical specifications clause 1000,1500,1700 and 2704 of MORT&H specification using batching plant, transit mixture and concrete pump as per direction of the Engineer-in-charge within all leads and lifts and other incidentials. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Drainage Spouts complete as per drawing no. SD/205 and MORT&H specification clause 2705 with 6 meter long GI 100 mm dia drainage GI light grade pipe (For Bridges) as per the direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement up to 40 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation as per MORT&H technical Specification, clause 2606 of and as per directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals . The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 kg per sqm (Zero point two five zero per square meter) on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 and as per the entire satisfaction and direction of Engineer – in- Charge including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. . The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying 40 mm (fourty milimeter) thick Bituminous Concrete with 100-120 TPH (one hundred to one hundred twenty ton per hour) batch type hot mix plant producing an average output of 75 tonnes (seventy five tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder VG -30 (VG-Thirty) @ minimum 5.50% (at the rate of five point five zero percent) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects and including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying 25 mm (twenty five milimeter) thick mastic asphalt wearing course with paving grade bitumen 85/25 (eighty five or twenty five) @ 10.2% (ten point two zero percent), fine aggregates, course aggregates, lime filler @ 17.92% (Seventeen point nine two percent) of total, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine-grained hard stone chipping at an approximate spacing of 10 cm (ten centimeter) centre to centre in both directions, pressed into surface when the temperature of surfaces is not less than 1DDC, protruding 1 mm to 4 mm over mastic surface, all complete as per MORT&H Technical specifications clause 516 and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals.The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Construction of embankment with approved materials deposited at site from roadway cutting and excvation of other road structures or other sources in layers of suitable thickness not exceeding 200mm ( two hundred millimetre) spreading to required slope and compacted with three wheel 80-100 KN (Eighty to one hundred Kilo Newton) static/ vibratory road roller to meet the requirements of table 300.1 and 300.2 of MORD specifications 2014 clause 301 to lines, grades, level and cross sections as per drawings or directions of the Engineer-in-charge including preparation of foundation for embankment in all kinds and classification of soils including saturated soil and dewatering/ bailing out of water wherever required including hauling of materials for construction of embankment within all leads and lifts. including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Construction of sub grade and earthen shoulder with approved materials obtained from borrow pit, with in all leads and lifts, transporting to site, spearding grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000m as per Technical Specifications Clause 303.1 The rate shall include carriage of machineries, equipment, tolls and materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects as per direction of Engineer-in-charge including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Earth work in excavation for all type of road structures such as Retaining walls, breasts walls, culverts, drains and parapets etcetra in all type of classification of soil as per drawing and technical specifications Clause 305 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m (Fifty metre), dressing of sides and bottam and back filling in trenches with excavated suitable material. Ordinary soil upto 3.00m (Three metre) depth. and as directed by the Engineer-in- Charge at site according to the M.O.R.D. technical specification 300 in association with other clauses.The cost of all useful material such as stones , shingles and aggregates received from the excavation shall be recovered from the contractor All the surplus material shall be disposed off by the contractor at approved dumping locations , to be identified by him at his own level and as per EMP guidelines and approval/ instruction of the Engineer without any additional cost. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per regulations and instructions of Engineer-in-charge including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundations any depth & height complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C (Plain cement concrete) grade M -10 (M - ten)Nominal mix 1:3:6 (one cement:three sand:six aggregate) [20 mm twenty milimetre) Nomial Size]. The rate shall include carriage of machineries, equipment, tools, centring & shuttring materials and safety measures, payment of all taxes and other incidentals necessary to complete the work in all respects. The rate including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Back filling behind abutment, wing walls and return walls complete as per drawing and Technical Specifications Clause 1204.3.8. The rate shall including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm (one hundred millimetres) dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) (one vertical):(twenty Horizontal) towards drawing face complete as per drawing and M.O.R.D. technical specification 2014 clauses 614,709 and 1204.3.7 as per the direction of Engineer-in-charge , including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Construction of Granular Sub-Base by providing well graded material of nominal maximum size grading 80 mm (eight milimetre) as per table 2.3 (two point three) of IRC SP-72-2008 (IRC-SP-seventy two-two thousand eight), spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface , mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compaction with three wheel 80-100 KN (eighty to one hundred kilonewton) static Roller capacity to achieve the desired density complete as per specifications contained in para 2.2 (two point two), 3.6 (three point six), & 3.7 (three point seven) of IRC SP-77-2008 (IRC-SP-seventy seven-two thousand eight) (By Using fresh material) and as per MORD specifications and as per the direction of Engineer-in -Chargeincluding entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge.. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN (eighty to one hundred kilonewton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 and 400.12 and M.O.R.D.Technical Specification Clause 406 and as per direction of Engineer-in-charger including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and applying primer coat with BITUMEN emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70kg -1.00 kg per sqm (zero point seven zero kilogram to one point zero zero kilogram per square metre) using mechanical means as per Technical Specifications Clause No. 502. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm (Zero point two five zero to zero point three zero kilogram per square meter) on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 and as per the entire satisfaction and direction of Engineer – in- Charge including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. . The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying 50 mm (fifty milimeter) thick dense graded bituminous macadam with 40-60 TPH batch type hot mix plant producing an average output of 50 tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying 30 mm (thiry milimeter) thick Bituminous Concrete with 100-120 TPH (one hundred to one hundred twenty ton per hour) batch type hot mix plant producing an average output of 75 tonnes (seventy five tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder VG -30 (VG-Thirty) @ minimum 5.50% (at the rate of five point five zero percent) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects and including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and fixing of typical PMGSY informatory sign board with logo as per M.O.R.D. specifications and drawings. Three M.S. plates of 1.6 (one point six millimetres) thick, top and middle plate duly welded with M.S. flat iron 25mmx5mm ( twenty five into five millimetre ) size on back on edges. The lower plate will be welded with M.S. angle iron frame of 25mmx25mmx5mm (twenty five into twenty five into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 Nos. (two Nos.) 75mmx75mm( seventy five into seventy five millimetre) of twelve SWG sheet, tubes posts duly embedded in cement conrete M-15 grade (M-fifteen) blocks of 450mmx450mmx600mm( four hundred fifty millimeter into four hundred fifty millimetre into six hundred millimetre), 600mm (six hundred millimetre below ground level, including mechanically mixed and vibrated. The top most diamond plate will be welded to middle plate by 47mmx47mm ( forty seven millimetre into forty seven millimetre)of 12 SWG (twelve SWG) steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, borders etcetera will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and M.O.R.D. technical specifications section 1701 and Annexture1700.1and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and fixing of Retro-reflectorised Traffic Signs 900x900x900mm triangular (nine hundred into nine hundred into nine hundred milimetre) cautionary, mandatory and informatory sign as per IRC:67 (IRC - sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm (one point five milimetre) thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm (seventy five milimtetre into seventy five milimtre into six milimetre) firmly fixed to the ground by means of properly designed foundation with M15 (M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level as per drawings and Technical Specification Clause 1701and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. TThe rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and erecting Direction and Place Identification signs with size 900x600mm (Nine hundred into six hundred milimetre) retro-reflectorised sign as per IRC:67 (IRC - sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm (two millimetre) thick size 900 x 600mm (nine hundred into six hundred milimetre) with area not exceeding 0.9 sqm (zero point nine square metre) supported on mild steel angle iron post 75x75x6mm (seventy five into seventy five into six millimetre) 2 (two) Nos firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450 x 450 x 600 mm (four hundred fifty into four hundred fifty into six hundred millimetres), 600 mm (six hundred millimetre) below ground level as per approved drawing and M.O.R.D. Tehnical Specification Clause 1701 and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and erecting Direction and Place Identification signs with size 1200x900mm (tweleve hundred into nine hundred milimetre) retro-reflectorised sign as per IRC:67 (IRC - sixty seven) made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm (two millimetre) thick size 900 x 600mm (nine hundred into six hundred milimetre) with area not exceeding 0.9 sqm (zero point nine square metre) supported on mild steel angle iron post 75x75x6mm (seventy five into seventy five into six millimetre) 2 (two) Nos firmly fixed to the ground by means of properly designed foundation with M-15 (M-fifteen) grade cement concrete 450 x 450 x 600 mm (four hundred fifty into four hundred fifty into six hundred millimetres), 600 mm (six hundred millimetre) below ground level as per approved drawing and M.O.R.D. Tehnical Specification Clause 1701 and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and fixing of typical PMGSY Logo sign board with Logo as per MORD specifications and drawing with ACP Sheet 3mm (three milimetre) thick fixed on MS angle 25mmx25mm x 3mm (twenty five milimetre into twenty five milimetre into three milimetre)size on back on edges. Vertical Post MS square tubes 80x80x4.80mm (eighty into eighty into four point eight zero milimetre) thick duly embedded with base plate 200x200x5mm (two hundred into two hundred into five milimetre)in cement concrete M-20 (M- twenty) (As per Drg.) grade blocks of Size 450mm x 450mm x 600mm (four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600 mm (six hundred milimetre) below ground level. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. Retro Reflective Sheet Type IV including cutting, printing, lettering & fixing comp. in all respects.{ Providing and Fixing 'Logo Board' of PMGSY Project double sided, at Starting point and Intermediate Distance}. and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and fixing of PMGSY Citizen Informatory board as per MORD specifications and drawing with ACP Sheet 4mm thick fixed on MS angle 25mmx25mm x 3mm (twenty five milimetre into twenty five milimetre into three milimetre) size on back on edges. Vertical Post MS square tubes 80x80x4.80mm (eighty into eighty into four point eight zero milimetre) thick duly embedded with base plate 300x300x5mm (three hundred into three hundred into five milimetre) in cement concrete M-20 (M-Twenty) grade blocks of Size Size 600mm x 600mm x 750mm (Six hundred milimetre into Six hundred milimetre into Seven hundred fifty milimetre), 600 mm (six hundred milimetre) below ground level. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1. Retro Reflective Sheet Type IV including cutting, printing, lettering & fixing comp. in all respects. Providing and Fixing Citizen Informatory Board of PMGSY Project (Fig.3 & Fig.4). and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and laying of hot applied thermoplastic compound 3 mm (three millimetre) thick including reflectorising glass beads @ 250 grms (at the rate two hundred fifty grams) per square metre area, thickness of 2.5mm (two point five millimetre) is exclusive of surface applied glass beads as per IRC 35 and MORD specification section 1700 and MORT&H 2015 clause 803.. The finished surface to be level, uniform and free from streaks and holes including entire carriage of materials within all leads lifts and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Providing and fixing dual direction retro reflective plastic Cat-eyes studs 3M of impact resistant plastic 115x80x16mm (one hundred fifteen into eighty into sixteen millimetres) ultra violet resistant yellow colour having micro prismatic cube corner refelectors suitable for fixing with expoxy/bitumen adhesive make ENNIS/STIMONITE complete as per drawing and technical specification clause 805 of MORTH specification 2013 as per the direction of the Engineer-in-charge , including entire carriage of materials within all leads lifts and other incidentals and per direction of Engineer-in-Charge.The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres), and as per direction of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. .The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.

Carrying out Load Deflection Test at the above cited bridge as per IRC SP:51 and furnishing report of the same. The load test operation covers application of required test load (equivalent to design live load) in any form like sand bag or soil or aggregates or any test at vehicles as per design and loading the same over bridge by any mean complete and measurement of deflection by dial gauge of least count 0.01 mm/0.1mm to satisfaction of Engineer-in-charge including all charges. The rates includes sale tax octori, royality, malkhana, toll tax, labour cess or other taxes imposed by the Government, but exclusive GST which shall be paid saparately.