Public Works Department Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Public Works Department - PWD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date14 Jan 2025
Closing Date20 Jan 2025
Tender Amount₹ 1,46,90,733
Costs
EMD
₹ 1,79,500Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Science Lab At Govt Sr School Dada Siba District Kangra (hp) (sub Head Construction Of Building Portion I/c Ws Si Septic Tank With Soak Pit And Rain Water Harvesting Tank)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWD_97956_1Tender No
Tenders/2024-25 -5050-75 dt 06.01.2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://hppwd.hp.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
543.37
383
208491
... More
Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
184.17
565
104185
... More
Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
53.07
511
27161
... More
Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level as per specifications, approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
198.54
135
26993
... More
Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like, up to all floor level, complete as per HPPWD specification, approved drawing, design and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
151.16
531
80296
... More
Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
35.22
4614
162505
... More
Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement is to four sand isto eight graded crushed/ broken stone aggregate 40mm (Forty millimetre) nominal size and curing complete excluding cost of form work in foundation and plinth in all depths, including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specification and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
18.72
4992
93450
... More
Filling in plinth with sand of approved quality under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
18.33
1467
26907
... More
Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
6439
6439
... More
Providing and laying mechanically mixed and vibrated reinforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter with minimum cement contents of 400kg (Four hundred kilogram) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
20.97
6953
145813
... More
Providing and laying mechanically mixed and vibrated reinforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter with minimum cement contents of 400kg (Four hundred kilogram) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in beams, suspended floors, roofs having slope of any degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases etcetera up to all floor level as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
179.96
7460
1342502
... More
Providing and laying mechanically mixed and vibrated reinforced cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty five newton) per square millimeter with minimum cement contents of 400kg (Four hundred kilogram) per cubic metre and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in walls (anythickness), including attached pilasters, buttresses,plinth and string courses, fillets, columns, pillars, piers,abutments, posts and strutss etcetera up to all floor level complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
48.77
7769
378928
... More
Providing and laying Tor steel of SAIL/ TISCO/RINL,/ JINDAL /PANTHER of (JSPL), Shyam Steel reinforcement thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
49525.4
92
4600910
... More
Providing and constrcution of brick work using Second class common burnt clay buildings bricks in super-structure above plinth level to all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
106.03
6933
735170
... More
Providing and constrcution of Second class half brick work using common burnt clay building bricks in super structure above plinth level to all heights/floor level in cement mortar 1:4 (one cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals, as per directions and entire satisfaction of the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
241.11
871
210079
... More
Providing and fixing milld steel channel 75x40x4mm (Seventy five into forty into four millimetre) (ISLC) with mild steel flat 40x12mm (Forty into twelve millimetre) combination welded together in frames of doors including hinges, jambs, lock jamb,beed and if required angle thrashold of mild steel angle 50x25mm (Fifty into twenty five millimetre) welded or rigidly fixed by machanical means embedded in cement concrete block 15x10x10 cm (Fifteen into ten into ten millimetre) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size), lugs with split end tails to each jambs including steel butt hinges 2.5mm (Two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
116
1096
127136
... More
Providing and fixing aluminium work of Hindalco/Jindal/Indian Aluminium CO. for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Polyester powder coated aluminium minimum thickness of polyester powder coating 50 (Fifty) micron as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
524.07
460
241334
... More
Providing and fixing aluminium work of Hindalco/Jindal/Indian Aluminium CO. for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium minimum thickness of powder coating 50 (Fifty) micron as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
300.37
541
162500
... More
Providing and fixing 5mm (Five millimetre) thick glass panes of modi guard/saint gobain (weight not less than 12.50 kg/ sqm (Twelve point five zero kilogram per square metre) glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber / neoprene gasket etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
73.29
1218
89311
... More
Providing and fixing stainless steel (Grade 304) fly proof wire gauge of 0.5mm (Zero point five millimetre) dia wire and 1.4mm (One point four millimetre) wide aperture on both side of windows, clear story widows with nuts and bolts complete as per specitations approved, drawings, design and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
73.29
856
62751
... More
Providing and fixing 35mm (Thirty five millimetre) thick factory made flush door shutter both side commerical (Non-decorative) phenol bonded termite resistant and bailing water proof core of block board construction with frame of first class hard wood and well matched commercial ply veneer with vertical grains or cross band and face veneer on both faces of flush door shutter ISI marked IS No.-2202 of Centuary ply board /Kitply/ green ply complete including carriage of material within all leads and lifts and other incidentals as per specifications approved, drawings, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
41.54
3099
128741
... More
Providing and fixing 12mm (Twelve millimetre) thick preliminated particle board of Action Tesa/ Century/Kitlam/Kit Ply/Green Ply ISI marked and of approved shade flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade-l Type-ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera complete with decorative lamination on both sides as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
18.45
1012
18686
... More
Providing and fixing Aluminium sheet 4mm (Four millimetre) thick composite panel having core of polythene fixed to internal side with screws or nails as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
3.69
2775
10241
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 (Fifteen) of approved design/pattern, with approved standard section and fixed to the existing window frame with chromium plated brass/ stainless steel screws at the rate 200 mm (Two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. (Only weight of grill to be measured for payment) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
86.8
527
45761
... More
Providing and fixing 300x16mm (Three hundred into sixteen millimetre) aluminium sliding door bolts make of PILOT/Sheel ISI marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
266
266
... More
Providing and fixing 250x16mm (Two hundred fifty into sixteen millimetre) aluminium sliding door bolts make of PILOT/Sheel ISI marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
22
275
6054
... More
Providing and fixing 200x10mm (Two hundred into ten millimetre) aluminium tower bolts make of PILOT/Sheel ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
30
90
2727
... More
Providing and fixing 150x10mm (One hundred fifty into ten millimetre) aluminium tower bolts make of PILOT/Sheel ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
198
76
15167
... More
Providing and fixing 100x10mm (One hundred into ten millimetre) aluminium tower bolts make of PILOT/Sheel ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
50
58
2935
... More
Providing and fixing 125mm (One hundred twenty five millimetre) aluminium handles make of PILOT/Sheel, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
32
61
1955
... More
Providing and fixing 100mm (One hundred millimetre) aluminium handles make of PILOT/Sheel, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
196
53
10564
... More
Providing and fixing 75mm (Seventy five millimetre) aluminium handles make of PILOT/Sheel, ISI marked, anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
50
46
2325
... More
Providing and fixing bright finished brass 100mm (One hundred millimeter) Mortice latch and lock and a pair of levers, handles with necessary screws etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
733
3668
... More
Providing and fixing 100mm (one hundred millimeter) bright finished brass door stopper with rubber cushion screw etc to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
20
274
5492
... More
Providing and fixing 250mm (Two hundred fifty millimeter) bright finished hard drawn hooks and eyes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
105
87
9167
... More
Providing and fixing 250mm (Two hundred fifty millimeter) bright finished hard drawn hooks and eyes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
6
78
469
... More
Providing and fixing 115mm ( one hundred fifteen millimeters) size bright finished brass hasp and staple (safety type) with necessary screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
5
112
562
... More
Providing and fixing ISI marked 150mm (One hundred fifty millimetre) brass single acting spring hinges of approved brand and maufacture with necessary screws etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
679
3397
... More
Providing and fixing cup board shutters with 25mm (Twenty five millimetre) thick veneered particle board IS : 3097 marked, exterior grade(Grade I), of approved make KItply/Action Tesa/Green including second class teakwood lipping of 25 mm (Twenty five millimetre) wide and 12 mm (Twelve millimetre) thick with non decorative veneering on both sides necessary screws and bright finished stainless steel piano hinges, complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
66.3
1469
97448
... More
Providing and laying 19mm (Nineteen millimeter) thick mirror polished Kota stone slab flooring with 55x55cm (fifty five into fifty five centimeter) slab of uniform colour over base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
350.81
1467
514849
... More
Providing and laying 19mm (Nineteen millimeter) thick mirror polished Kota stone of uniform colour in risers of steps, skirting, dado and pillars laid on 12 mm (Twelve millimetre) average thick cement mortar 1:3 (one cement isto three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor level as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
31.66
1663
52654
... More
Providing and fixing 10mm (Ten millimetre) thick acid and/or alkali resistant tiles of 30x30 cm (Thirty into thirty centimetre) size of BELL/ORIENT/ NITCO/KJARIA make approved colour and shade in flooring over 12 mm (Twelve millimetre) thick acid and/or alkali resisting mortar bedding 1:4 (one acid proof cement isto four coarse sand) and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete upto all floor level as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
133.89
1518
203366
... More
Providing and fixing 10mm (Ten millimetre) thick acid and/or alkali resistant tiles of 30x30 cm (Thirty into thirty centimetre) size of BELL/ORIENT/ NITCO/KJARIA make approved colour and shade in dado/skirting over 10 mm (ten millimetre) thick acid and/or alkali resisting mortar bedding 1:4 (one acid proof cement isto four coarse sand) and joints filled with acid and/or alkali resisting cement as per IS : 4457 complete upto all floor level as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
7.95
1583
12587
... More
Providing and fixing 10mm (Ten millimeter) thick anti skid water proof stain and impact resistant heavy duty vetrified tiles of BELL/ORIENT/ NITCO/KJARIA approved make 605x605mm size (six hundred five into six hundred five millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required up to all floor level, complete as per HPPWD specifications and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
58.01
1473
85489
... More
Providing and fixing 10mm ( ten millimeter) thick anti skid water proof stain and impact resistant heavy duty vetrified tiles of BELL/ORIENT/ NITCO/KJARIA approved make 605x605mm size (six hundred five into six hundred five millimetre) manufactured of approved shade and colour in Skirting, dado, risers of stps etcetera laid over 12mm (twelve millimeter) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required up to all floor level, complete as per HPPWD specifications and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
6.41
1502
9630
... More
Providing and laying 6mm (Six millimetre) thick first quality white glazed tiles 30x45cm (Thirty into forty five millimetre) in skirting, risers of steps and dado for all heights over 12mm (Twelve millimetre) thick cement plaster 1:3 (one cement isto three sand) and jointed with white cement slurry complete up to all floor level, complete as per HPPWD specifications and as directed by the Engineer,-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
87.48
1328
116252
... More
Providing and laying white makrana marble work (Table rubbed and polished for wall) with grey streaks internally as well as externally having semi round nosing (Veneer work) 2.5cm (Two point five centimeter) thick in cement mortar 1:3 (one cement isto three sand) including jointing with white cement mortar 1:2 (one white cement isto two marble dust) with an admixture of pigment to match the marble shade etcetera up to all floor level, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
4.1
3726
15277
... More
Providing and laying 19mm thick white makrana marble work (Table rubbed and polished for urinal partition) with grey streaks internally as well as externally having semi round nosing jointing with white cement mortar 1:2 (one white cement isto two marble dust) with an admixture of pigment to match the marble shade etcetera up to all floor level, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
0.81
3611
2925
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (twelve millimetre) thick average base of cement mortar 1:4 (One cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing complete upto all floor level as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
70.29
3662
257458
... More
Providing and laying 40 mm (Forty millimetre) thick red sand stone flooring over 20 mm (Twenty millimetre) thick average base of cement mortar 1:5 (One cement isto five coarse sand) with joints finished flush complete upto all floor level as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
7.2
1004
7230
... More
Providing and fixing pre painted steel sheet in roofing over all steel trusses providing and fixing with hot applied metallic zinc coated Kolar Metal or its equivalent pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimetres) thickness having 1060 mm (one thousand sixty millimetres) cover width, overall width 1126mm (one thousand one hundred twenty six millimetres), 28mm (twenty eight millimetres) crest depth at 353+2mm (three hundred fifty three plus two millimetres) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimetres). The main crest width at top of 25mm (twenty five millimetres) and at lower 81mm (eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length with as required with EPDM seal complete as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
294.76
1407
414875
... More
Providing and fixing pre painted steel sheet in ridges having proper Gola of plain prepainted or hips 60cm (sixty centimetre) overall with hot dipped metallic zinc coated, Kolar Metal or its equivalent make over steel section, pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeters) thickness having 1060 mm (one thousand sixty millimeters) cover width, overall width 1126mm (one thousand one hundred twenty six millimeters), 28mm (twenty eight millimeters) crest depth at 353+2mm (three hundred fifty three plus two millimeters) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimeters) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length complete with all accessories as required with EPDM seal complete as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
36.9
736
27177
... More
Providing and fixing 0.63mm (zero point six three millimeter) thick sheet 30cm (Thirty centimeter) wide 45cm (Forty five centimeter) overall semicircular plain G.I sheet U-shape gutter with iron brackets 40x3mm (forty into three millimeter) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe as per design upto all floor level, complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of materials within all leads, lifts, and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
71.99
709
51048
... More
Providing and fixing flushing 38cm(Thirty centimeter) overall with 0.60mm ( Zero point six milimetre)thick pre painted sheet in roofing with hot dipped metallic Zink coated sheet with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with pre painted J or L hooks, bolts and nuts 6mm(Six milimetre) dia meter & pre painted G.I. limpet & bitumen washers complete with all accessories as per approved drawing, design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
107.84
637
68748
... More
Providing and fixing on wall face Single socketed 110 mm (One hundred ten millimetre) diameter unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 Type A make of Finolex/ Relpipe (Reliance)/Supreme including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
220
317
69806
... More
Providing and fixing on wall face 110 mm (One hundred ten millimetre) diametre plain bend unplasticised - PVC (Polyvinyl chloride) moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 Type A of Finolex/ Relpipe (Reliance)/Supreme including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
88
137
12126
... More
Providing and fixing on wall face 110 mm (One hundred ten millimetre) shoe unplasticised - PVC (Polyvinyl chloride) moulded fittings/ accessories for unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 Type A Finolex/ Relpipe (Reliance)/Supreme including jointing with seal ring conforming to IS : 5382, leaving 10mm (Ten millimetre) gap for thermal expansion complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
22
120
2658
... More
Providing and fixing M.S. (Mild Steel) black plain sheet 2.00mm (Two point zero zero millimeter) thick in facia/eaves boards/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
57.25
1689
96695
... More
Providing, fabricating and erection of structural steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel of TATA/SAIL as required In trusses and trussed purlins etcetera wherever required, all complete complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6484.72
110
719155
... More
Providing, fabricating and erection of structural steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel of TATA/SAIL as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
384.16
125
48174
... More
Providing and fixing 100mm (one hundred millimeter) diameter mild steel pipe (heavy duty) weight not less then 14.50 Kg/Rmt (Fourteen point five zero kilogram per running metre) for porch fixing on cement concrete base complete and applying a coat of red lead primer complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
969
4847
... More
Providing and fixing 50mm (Fifty millimetre) diameter mild steel pipe hand rail slip resistant at two levels as 75cm (Seventy five centimeters) and 90cm ( ninety centimeters) height with round ends and 25mm (Twenty five millimetre) diameter mild steel hollow pipe balusters of 14 to 16 (Fourteen to sixteen) gauge @ 60cm (Sixty centimetres) centre to centre welded at top with hand rail and embedded in reinforced cement concrete parapet including painting with red lead paint after the pretreatment of metal surface complete as per approved design and drawing as specified or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
5.4
1089
5885
... More
Providing and fixing railing for stair case having balusters of mild steel solid square bars 19mmx19mm (Ninteen millimetre into nineteen millimetre) and 12mmx12mm ( twelve millimetre into twelve millimetre) size in combination with mild steel flat 50x5mm (Fifty into five millimetre) with a clear height of 85cm (eighty five centimeters) at required spacing, embedded in reinforced cement concrete, steps and welded with Eletric welding plant at top alongwith hand rail of hollow rectangular pipe of 14 to 16 (Fourteen to sixteen) gauge 60mmx40mm (Sixty into forty millimetre) size. The balusters welded/jointed with each other with two numbers mild steel flat 50x5mm (Fifty into five millimeter) including painting with red lead paint after the pretreatment of the metal surface complete as per approved drawing and design as specified or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
15
1539
23090
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (Twenty into ten into two millimetre) and braced with flat iron diagonals 20x5mm (Twenty into five millimetre) size, with top and bottom rail of T-iron 40x40x6mm (Forty into forty into six millimetre), with 40 mm (Forty millimetre) diametre steel pulleys, complete with bolts, nuts, locking arrangement,stoppers, handles, including applying a priming coat of approved steel primer complete as per approved drawing and design as specified or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
10.8
7703
83195
... More
Providing and Fixing 595x595x6mm ( Five Hundred ninety five into Five Hundred ninety five into Six Millimeter) designer board of everest (E-board) ceiling over angle iron and T-section of 25x25x5mm (Twenty five into twenty five into five millimetre) frame work including applying a priming coat of approved steel primer complete as per approved drawing and design as specified or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
13.52
1115
15075
... More
Providing and applying 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), up to all floor level complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
601.93
205
123516
... More
Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
768.4
267
205778
... More
Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
695.77
249
173455
... More
Making grooves in external cement plaster at 30 cm (Thirty centimetre) interval for making design pattern in elevation as per approved drawing design and as per directions of Engineer-in-charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
749.1
14
11087
... More
Providing and applying white cement based putty of average thickness 1mm (One millimtre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete upto all floor level as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1464.17
97
143196
... More
Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with ready mixed primer of approved brand and manufacture (Apex/Asian paints/Narolac) complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
2013.22
55
112338
... More
Finishing wall with weather proof exterior grade emulsion paint of Apex/Asian paints/Narolac paints of approved brand and manufacture and of required shade on undecorated wall surfaces (two or more coats) to give an even after throughly brushing the surface to remove all dirt and remains of loose powdered material incluing applying of putty as required complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
460.76
106
49255
... More
Providing and applying distempering (two or more coats) with synthetic Acrylic distemper of approved brand and manufacture of Apex/Asian paints/Narolac and of required shade on un-decorated wall surfaces to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
1176.61
99
117073
... More
Providing and applying Apex/Satin enamel paint (two or more coats) of approved shade of approved brand and manufacture of Apex/Asian paints/Narolac and of required shade on un-decorated wall surfaces to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
373.94
119
44499
... More
Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (At the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (At the rate of zero point seven five litre per ten square metre) of approved brand and manufacture of Apex/Asian paints/Narolac including preparing the surface even and sand papered smooth upto all floor level complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
179.34
120
21628
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm (At the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (At the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture of Apex/Asian paints/Narolac including preparing the surface even and sand papered smooth upto all floor level complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
65.51
96
6341
... More
Providing plinth protection 50mm (Fifty millimetre) thick cement concrete 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimetre) nominal size) over 75mm (Seventy five millimetre) thick bed of dry brick aggregate 40mm (Forty millimetre) nominal size well rammed, consolidated and grouted with fine sand including necessay excavation, levelling, dressing and finishing the top surfaces of concrete smooth etcetera complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
55.64
549
30569
... More
Providing, laying and jointing 150 mm (One hundred fifty millimetre) diameter glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (one cement isto one fine sand) including testing of joints etcetera complete as per approved drawing, design and specification and as per direction and entire satisfaction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
55.64
490
27269
... More
Providing and fixing mild steel holder bat clamps of approved design to PVC (Polyvinyl chloride) pipe 110mm (One hundred ten millimetre) diametre embedded in and including cement concrete blocks 10x10x10cm (Ten into ten into ten centimetre) of 1:2:4 mix (One cement isto two sand coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size, including cost of cutting holes and making good the walls etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
66
251
16579
... More
Providing and laying water proofing treatment shall be done in two coats apply First coat of Dr. Fixit fast Flex to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero point six zero square meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm (Three hundred millimeter) vertically. The second coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement isto four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimeter) per 50Kg (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky.complete as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
183.31
638
117025
... More
Providing and laying 40mm (Forty millimetres) thick cement concrete flooring 1:2:4 (One cement isto two sand isto four graded/ crushed stone aggregate 20mm (Twenty millimetres) nominal size) mechanically mixed laid in one layer and finished with a floating coat of neat cement and curing complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
52.88
478
25319
... More
Providing and applying 15mm (fifteen millimeter) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
82.2
351
28877
... More
Supplying and fixing cast iron cover without frame of size 455x610mm (Four hundred fifty five into six hundred ten millimetre) rectangular (light duty) the weight of the cover to be not less than 23kg (Twenty three kilogram) without frame for manholes as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
3
1392
4177
... More
Providing and filling crushed stone or brick aggregate 40mm (Forty millimetres) nominal size) in soak pit as per directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts of materials and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
10.6
937
9932
... More
Excavation in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting work or any other mixed variety of soil, including dressing of sides and bed and disposal of all excavated earth in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale tax, GST or any other taxes imposed by the Government.
13.5
170
2303
... More
Providing and fixing to wall ceiling and floor ISI marked 15mm (Fifteen millimeters) nominal bore galvanized mild steel tubes (medium grade) of approved brand and manufacture (TATA/ JINDAL MAKE) fittings and clamps including making good the walls, ceiling and floor, up to all floor levels complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale tax, GST or any other taxes imposed by the Government.
90
411
37035
... More
Providing and fixing to wall ceiling and floor ISI marked 20mm (Twenty millimeters) nominal bore galvanized mild steel tubes (medium grade) of approved brand and manufacture (TATA/ JINDAL MAKE) fittings and clamps including making good the walls, ceiling and floor, up to all floor levels complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale tax, GST or any other taxes imposed by the Government.
60
460
27630
... More
Providing and fixing 16mm (Sixteen millimeter) nominal bore/diameter 1216 (One thousand two hundred sixteen) polythene aluminium polythene (P.E A.L.P.E.) composite pressure pipe U.V. stabilized with carbon plastic confirming to IS 15450-2004 (Fifteen thousand four hundred fifty - Two thousand four) of Kitec for hot and cold water including all special fittings of composite material like elbows, tees, reducers, couplers connectores, clamps etcetera, cutting, fixing and making good the walls etcetera, including filling the joints with approved adhesive complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
180
405
72900
... More
Providing and lying in trenches ISI marked 25mm (Twenty five millimetre) nominal bore. galvanized mild steel tubes (Medium grade) tube fittings of approved brand and manufacture (TATA/ JINDAL MAKE) complete (earth work in trenches to be measured and paid for separately), as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale tax, GST or any other taxes imposed by the Government.
50
334
16700
... More
Making connection of galvanised steel distribution branch with galvanised iron main 25mm to 40 mm (twenty five to forty milimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete as per approved drawing, design and specifications and as per direction and entire satisfaction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
5
573
2867
... More
Constructing masonry Chamber 30x30x50cm (Thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement isto four coarse sand) for stop cock, with cast iron surface box 100x100 x75mm (One hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement isto two coarse sand four graded stone aggregate 20 mm (Twernty millimetre) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement isto five fine sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size ) and inside plastering with cement mortar 1:3 (one cement isto three coarse sand) 12mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (Seven point five) complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
2322
11614
... More
Providing and fixng Vitreous china wash down water closet European type W.C. of Star's No. 20087 (S-10) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetre) including PVC cistern (Sleek plus) and fixed with jet pressure, approved brand and manufacture of Hindware/Cera/Jaquar of Star white/Snow white shade including jointing with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work and bed concrete to be measured and paid for separately) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
2
9380
18760
... More
Providing and fixng Vitreous china wash down water closet (European type W.C. Pan) of matrix No. 20087 (Twenty thousand eighty seven) (S-10) (S-Ten) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimeter) including PVC cistern of Hindware/Jaquar/Cera of Star white/Snow white shade and its equivalent with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One Cement isto One Sand) (Earth work and bed concrete to be measured and paid for separately) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
1
8632
8633
... More
Providing and fixing vittreous china wash down water closet squatting pan Orissa Pan W.C. No.2071 of size 58cmx44cm (Fifty eight centimetre into forty four centimetre) including flushing cistern of Hindware/Cera/Jaquar of Star white/Snow white shade (earth work, bed concrete, foot rest and trap to be measured and paid for separately), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
5751
23006
... More
Providing and fixing in cement mortar 1:3 (one cement isto three sand), a pair of vitreous China foot rests of size 250mm x 130mmx30mm (Two hundred fifty into one hundred thirty into thirty millimetre) of Cera/Hindware/jaguar for long pattern squatting pan water closet as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
219
879
... More
Providing and fixing Viterous china urinal large flat back No 60002 with 5.00 (Five) litre capecity automatic flushing system of Hindware/ Cera/ Jaquar in white shade including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and Paid for separately) including carriage of material within all leads, lifts of material and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
5024
20096
... More
Providing and fixing 8mm (Eight millimeter) diametre C.P. / S.S. Jet of Jaquar/ Hindware/ Cera/ Kerovite/ JAL with flexible tube upto 1 mtr (One metre) long with S.S. triangular plate to Eureopean type W.C. of quality and make as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
315
1263
... More
Providing and fixing wash basin No. 10001 of size 55x40 cm (Fifty five into forty centimetre) of Hindware/Cera/Jaquar in white shade with C.I. brackets, 15 mm (Fifteen millimetre) chromium plated brass pillar taps ISI marked IS No. 8934 JAL/ESS 32 mm (Thirty two millimetre) Chromium plated brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6
3255
19532
... More
Providing and fixing white vitreous china pedestal for wash basin of Hindware/ Cera/ Jaquar of Star white/snow white shade having recessed at the back for the reception of pipes and fittings complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6
1365
8192
... More
Providing and fixing vitreous china labortary sink No. 1355 of size 55x40x18cm (Fifty five into forty into eighteen centimetre) of ISI mark of approved brand of Hindware/Jaquar/Cera in Star white/Snow white shade including cutting holes in wall and making good the same as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
14
5613
78582
... More
Providing and fixing 32mm (thirty two millimeter) nominal diameter CP brass waste pipe for wash basin or sink including brass check nut complete as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
20
209
4184
... More
Providing and fixing 3 (Three) layer PP-R (Poly propylene Random copolymer) Unions PPR Union 32mm (Thirty two millimetre) confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
20
355
7106
... More
Providing and fixing chromium plated Brass 32mm (Thirty two millimetre) size Bottle Trap of approved quality & make omplete as per direction and entire satisfaction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
20
937
18746
... More
Providing and fixing 600x450mm (Six hundred into four hundred fifty) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
6
1085
6512
... More
Providing and fixing 600x20mm (Six hundred into twenty millimeter) C.P. (chromium plated) brass towel rail manufacture of Jaquar/Hindware/ Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sales tax, GST or any other taxes imposed by the Government.
3
573
1721
... More
Providing and fixing 600x120x5mm (Six hundred into one hundred twenty into five millimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. (Chromium plated) brass brackets and guard rail complete fixed with 40mm (Forty millimeter) long screws, rawl plugs etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
3
807
2422
... More
Providing and fixing chromium plated brass toilet paper holder of Continental series of Jaquar/ Classic series of Hindware/ Floral series of Cera/ Vintage series of Kerovite/ Hindon series of JAL including necessary fittings complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
3
578
1735
... More
Providing and fixing PTMT liquid soap container 109 mm (One hundred nine millimetre) wide, 125mm (One hundred twenty five millimetre) high and 112 mm (One hundred twelve millimetre) distance from wall weight not less than 105 gms (One hundred five gram) of standard shape with bracket of the same materials with snap fittings of approved quality and colour as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
8
168
1346
... More
Providing and fixing PTMT soap dish holder of approved brand and manufacture of size 138x102x75mm (One hundred thirty eight into one uhndred two into seventy five millimetre) weight not less than 105 gms (One hundred five gram) complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications, approved design, drawing, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including GST, Sales tax, Toll tax or any other taxes imposed by the Government.
8
138
1108
... More
Providing and fixing C.P. (Chromium plated) 15mm (Fifteen millimetre) nominal bore brass long body bib cock of Jaquar/ Hindware/ Cera/ Kerovite/ JAL of approved manufacture conforming to IS standards as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4
444
1779
... More
Providing and fixing 15mm dia (Fifteen millimeter) diameter C.P. (Chromium Plated) Brass pillar tap with capstan head of Jaquar/ Hindware/ Cera/ Kerovite/ JAL, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
20
580
11614
... More
Providing and fixing 15mm (fifteen millimeter) dia CP brass stop cock of Jaquar/ Hindware/ Cera/ Kerovite/ JAL complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
20
321
6422
... More
Providing and fixing PTMT Concealed stop cock, 15 mm (Fifteen millimetre) nominal bore, 108 mm (One hundred eight millimetre) long, weight not less than 108 gms (One hundred eight grams) of approved quality and colour as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
15
520
7800
... More
Providing and fixing ISI marked 45cm (forty five centimeter) long and 15mm (fifteen millimeter) nominal bore uplasticised PVC connection pipe with brass unions complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
15
100
1511
... More
Providing and fixing 32mm (Thirty two millimetre) diametre P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
20
107
2146
... More
Providing and fixing 15 mm (Fifteen millimeter) nominal bore C.P. (Chromium Plated) brass full way valve with wheel as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
288
1442
... More
Providing and fixing 20 mm (twenty millimeter) nominal bore C.P. (Chromium Plated) brass full way valve with wheel as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
358
1793
... More
Providing and fixing 20 mm (twenty millimeter) nominal bore C.P. (Chromium Plated) brass full way valve with wheel as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
5
428
2145
... More
Providing and fixing 15mm (Fifteen millimetre) nominal bore brass ball valve of approved quality, High or low pressure, with plastic floats complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
3
359
1079
... More
Providing and placing three layered PVC (Poly Venyl Chloride) water storage tank ISI marked 12701 (Twelve thousand seven hundred one) Sintex/Supreme/Finolex make tripple layer water tank complete in all respects, with necessary fittings including over flow pipe ball valve, scour pipe, with polythene float valve, PVC cover with locking arrangement including providing pads of sizes as required for inlet and outlet complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
4000
9
36400
... More
Providing and fixing PVC (Polyvinyl chloride) floor trap make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture self cleaning design including fixing with approved adhesive, cost of cutting making good the wall complete 110X90 mm ( one hundred ten into Ninety millimeter) as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
30
388
11640
... More
Providing and fixing 110mm (One hundred ten millimetre) diametre high pressure P.V.C. (Poly vinyl chloride) spigot and socket soil, waste and ventilating pipes ISI marked confirming to IS-14735-99 medium class make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture including fixing with approved adhesive etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
168
487
81821
... More
Providing and fixing 150mm (One hundred fifty millimetre) diametre high pressure P.V.C. (Poly vinyl chloride) spigot and socket soil, waste and ventilating pipes ISI marked confirming to IS-14735-99 medium class make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture including fixing with approved adhesive etcetera complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
120
584
70164
... More
Providing and fixing 110mm (Two hundred ten millimeter) diameter PVC (Polyvinyl chloride) (D-Plast) single equal branch with oval access door ISI marked make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture with insertion rubber washer, 3mm (Three millimeter) thick bolts and nuts, including testing of pipes and joints complete as per approved specifications, design, drawing, as per the directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
10
298
2981
... More
Providing and fixing 110mm (One hundred ten millimeter) diameter PVC (Polyvinyl chloride) (D-Plast) door bend with oval access door ISI marked make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture with insertion rubber washer, 3mm (Three millimeter) thick bolts and nuts, including fixing with approved adhesive, testing of pipes and joints complete as per approved specifications, design, drawing, as per the directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
20
215
4316
... More
Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories P.V.C. (Polyvinyl chloride) collars 110mm (one hundred ten millimeter) diameter ISI marked confirming to IS-14735-99 medium class make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture including fixing with approved adhesive etcetera complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals . The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
30
125
3750
... More
Providing and fixing P.V.C. (Polyvinyl chloride) plain bend 110mm (one hundred ten millimeter) diameter make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture ISI marked including fixing with approved adhesive etcetera complete and carriage of material within all leads, lifts and other incidental Charges.The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government. P.V.C. (Polyvinyl chloride) Plain Bend 100mm (One hundred millimetre) (Nominal diameter)
30
137
4134
... More
Providing and fixing 110mm (One hundred ten millimetre) diametre ISI marked PVC (Poly venyl chloride) clamps make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture of approved design with steel screws and rawal plugs etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
30
219
6582
... More
Providing and fixing 100mm (One hundred millimetre) nominal diametre CP (Chromium Plated) grating of Jaquar/ Hindware/Cera/ Kerovite/ JAL of approved manufacture and colour as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
15
40
603
... More
Providing and fixing grab Bar 40mm (Forty millimetre) diametre, 692mm (Six hundred ninety two millimetre) long SST pipe fixed with wall at 0.78m (Zero point seven eight metre) height with mild steel plate as the position of seats or as per approved architectural drawing, design and specifications and as per the directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
3
1490
4472
... More
Providing and laying (to level or slope) 150mm dia (One hundred fifty millimetre) diametre reinforced cement concrete light duty non pressure pipes IS Class NP-2 (Non-pressure -two) including fixing collar with cement mortar 1:2 (One cement isto two sand) and testing the joints as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
105.1
464
48819
... More
Providing and laying mechanically mixed plain cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete for bedding of stone ware/ PVC/RCC pipes in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
105.1
923
97049
... More
Providing and fixing square-mouth stone ware gully trap class SP-1 complete with cast iron grating brick masonry chamber with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) with water tight cast iron cover with frame of 300 x300 mm (Three huundred into three hundred millimetre) size (inside) the weight of cover to be not less than 4.50 kg (Four point five zero kilogram) and frame to be not less than 2.70 kg (Two point seven zero kilogram) as per standard design 150 x 100 mm (One hundred fifty into one hundred millimetre) size as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
5
2345
11730
... More
Constructing brick masonry manhole with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in cement mortar1:4 ( one cement isto four coarse sand) with reinforced cement concrete top slab with 1:1.5:3 mix (one cement isto one point five coarse sand (zone- III) isto three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand(zone- III) isto eight graded stone aggregate 40 mm (Forty millimetre) nominalsize), inside plastering 12 mm (Twelve millimetre) thick with cement mortar1:3 (one cement isto three coarse sand) finished with floating coatof neat cement and making channels in cement concrete1:2:4 (one cement isto two coarse sand isto four graded stoneaggregate 20 mm (Twenty millimetre) nominal size) finished with a floatingcoat of neat cement complete as per standard design Inside size 90x80 cm (Ninety into eighty centimetre) and 45 cm (Forty five centimetre) deep including cast iron cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38kg (Thirty eight kilogram), weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST or any other taxes imposed by the Government.
5
11290
56450
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements